June 12, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.
p>The selected candidate will be part of a high-performing, detail-oriented team that fulfills engineering tasks related to initial hardware production, shipboard installation, test, delivery, and at-sea testing of Ship Control components. Ship Control develops in-house electronic systems and integrates vendor/government supplied equipment to support the VA/CLB Ship Control System (SCS), VA/CLB Monitoring Systems, and the VA/CLB Portable Ship Control Systems (PSCS).
East Hartford, Connecticut30+ days ago
Active and existing security clearance required after day 1At RTX, the world largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world’s most complex problems.
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote..
East Hartford, CT30+ days ago
TSE is a dynamic engineering organization focused on the design, fabrication, and installation of Special Test Equipment (STE) in support of commercial and military ground testing of engines and components. 5 years of electrical engineering experience or an Advanced Degree in Electrical or Controls Engineering with 3 years of electrical or engineering experience.
Groton, Connecticut5 days ago
p style="margin:0in;margin-bottom:0.0001pt">Specific responsibilities include but are not limited to: - Coordination of Testing Between interfacing test departments (D972, D272, D441, D278, D445) .
- Support extended testing durations and shift work (1st, 2nd and 3rd) as required to minimize schedule impacts.
p>The Strategic Weapons System Test Engineer must proactively prepare for and execute assigned Strategic Weapon System Testing for the COLUMBIA new construction submarine, in a safe and efficient manner. Preferred:
- Mechanical system test experience to include fluid or air system flush and hydrostatic testing, or:
- Electrical/Electronic system test experience, including fiber optic cabling.
p>Support Electric Boat development of design deliverables from every technical discipline (e.g.structural, mechanical, electrical) for modification of the COLUMBIA Class design to facilitate construction and test evolutions within the Electric Boat shipyard and Government test facilitiesManagement of commercial vendors finalizing the design of test facilities at Government shipyards and test facilities where portions of the COLUMBIA Class submarine will be built or testedReview and approval of commercial vendor technical deliverablesConstruction support and technical problem resolution of emergent issues during the outfitting of the IPS CTF in preparation for testing of COLUMBIA Class submarine equipmentDevelopment of system designs for COLUMBIA Class IPS equipment integrationAssemble and build consensus with Engineering, Design, and Design/Build/Sustain teams to solve complex issues. Preferred:
Testing experienceConstruction support experienceEngineering construction support and troubleshooting experienceFamiliarity and experience with the COLUMBIA Class IPS systemPrevious Naval Nuclear Propulsion Program experienceA bachelors degree or higher in Engineering.
Knowledge in or ability to learn how to read and interpret engineering drawings, electrical diagrams construction drawings, equipment drawing, and vendor equipment manuals and be familiar with shipbuilding specifications, technical manuals and other source documentation. To do this, test engineers will interface with engineers of various disciplines, Electric Boat management, Electric Boat Program Offices, Navy Laboratories, SUPSHIP, and NAVSEA.
Knowledge in or ability to learn how to read and interpret engineering drawings, electrical diagrams construction drawings, equipment drawing, and vendor equipment manuals and be familiar with shipbuilding specifications, technical manuals and other source documentation. To do this, test engineers will interface with engineers of various disciplines, Electric Boat management, Electric Boat Program Offices, Navy Laboratories, SUPSHIP, and NAVSEA.
New London, CT18 days ago
p>This diverse group, comprised of engineers of varied backgrounds and years of Navy experience, performs system and component engineering for the Strategic Weapons Systems (SWS) and Strategic Weapons Support Systems (SWSS) for COLUMBIA/Dreadnought submarine classes. Strategic Weapons Systems (SWS) Engineering, Department 430, develops in-house embedded systems and integrates government furnished equipment to support the Strategic Weapons Systems of the Columbia Class and other submarine classes.
strong>Responsibilities Strong organizational/interpersonal verbal and written skills Self motivated with the ability to think objectively and drive technical solutions to successful conclusion QualificationsRequired: High School Diploma or equivalent 2+ years experience managing contractor or vendor interfaces Ability to obtain and maintain a Secret security clearance through the Department of Defense Preferred: Experience in military (submarine) system development, operations, installation and/or test and evaluation Understanding and experience with applying the principles of System Engineering SWS/SWSS experience Secret Clearance * Experience presenting technical/programmatic content to stakeholders PI283198622. Responsibilities for this Position: Test Engineer - Comm Systems US-CT-Groton Job ID: 2026-18256 Type: Full-Time # of Openings: 4 Category: Engineering EB Groton Shipyard Overview D430 Strategic Weapons Systems Engineering Strategic Weapons Systems (SWS) Engineering, Department 430, develops in-house embedded systems and integrates government furnished equipment to support the Strategic Weapons Systems of the Columbia Class and other submarine classes.
Groton, Connecticut5 days ago
p style="margin:0px">This diverse group, comprised of engineers of varied backgrounds and years of Navy experience, performs system and component engineering for the Strategic Weapons Systems (SWS) and Strategic Weapons Support Systems (SWSS) for COLUMBIA/Dreadnought submarine classes. Strategic Weapons Systems (SWS) Engineering, Department 430, develops in-house embedded systems and integrates government furnished equipment to support the Strategic Weapons Systems of the Columbia Class and other submarine classes.
New London, CT30+ days ago
li>Applicant should have the interpersonal and communication skills necessary to investigate problems by effectively asking questions, extracting necessary data from available sources, and working with others to determine root causes and implement appropriate solutions. D442 works closely with the U.S. Navy, Government, Vendors and other EB Departments associated with ship systems component construction and development to ensure the comms system requirements are met.
Department 408 performs logistics changes and support to supported submarine classes and creates and maintains maintenance products to supported submarine classes. This position requires strong decision making, program management, work ethics, and the ability and willingness to learn new processes.
Department 408 performs logistics changes and support to supported submarine classes and creates and maintains maintenance products to supported submarine classes. This position requires strong decision making, program management, work ethics, and the ability and willingness to learn new processes.
East Hartford, Connecticut17 days ago
None/Not RequiredAt RTX, the world largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world’s most complex problems.
The successful candidate will work closely with application owners, the Test Lead, and the Performance Architect to define testing requirements, develop automation scripts and processes, and ensure effective test plans are implemented and executed with a focus on automation.
p>The successful candidate will work closely with application owners, the Test Lead, and the Performance Architect to define testing requirements, develop automation scripts and processes, and ensure effective test plans are implemented and executed with a focus on automation. Qualifications You Must Have:
- Bachelor's degree in Information Technology or a related technical field and 8+ years of applicable work experience; OR an Advanced degree in Information Technology or a related technical field and 5+ years of applicable work experience.
New London, CT30+ days ago
We're looking for driven high-performers who consistently focus on achieving results, demonstrate extreme ownership, thrive in a highly collaborative environment, take pride in building and strengthening their team, exemplify our core values, and seek to be part of something special that is more than just the means to a paycheck: a mission and vision that is bigger than themselves and their immediate team. In summary, our team generates system and hardware specifications based on concepts that we develop, supports other teams who design and develop the system hardware and software using our specifications, and supports integration and test of the hardware and software in our lab, test facilities, and the ship.
Were looking for driven high-performers who consistently focus on achieving results, demonstrate extreme ownership, thrive in a highly collaborative environment, take pride in building and strengthening their team, exemplify our core values, and seek to be part of something special that is more than just the means to a paycheck: a mission and vision that is bigger than themselves and their immediate team. In summary, our team generates system and hardware specifications based on concepts that we develop, supports other teams who design and develop the system hardware and software using our specifications, and supports integration and test of the hardware and software in our lab, test facilities, and the ship.
p>At General Dynamics Electric Boat, you dont have to imagine it, you are a part of creating state of the art submarines that can operate and perform missions in the most extreme environments on Earth. General Dynamics Electric Boat is a recognized leader in the design, construction and lifecycle support of submarines for the United States Navy.
p>As a software engineer supporting HM&E systems, youll be part of an engineering team that designs, develops, integrates, and tests shipboard software for multiple submarine platforms. General Dynamics Electric Boat is a recognized leader in the design, construction and lifecycle support of submarines for the United States Navy.
p>As a Senior Software Engineer supporting HM&E systems, youll be part of an engineering team that designs, develops, integrates, and tests shipboard software for multiple submarine platforms. General Dynamics Electric Boat is a recognized leader in the design, construction and lifecycle support of submarines for the United States Navy.
Responsibilities: Candidates best suited for this position will possess a passion for learning, teamwork, and being taught in the principles of electrical control systems, current control, and electric drives while assisting in the management of suppliers to deliver requirement compliant components for validation and use in the ship test program. The Integrated Power Systems Advanced Current Compensation team in (Department 489) supports new technology development for the electric drive propulsion control system.
p>Preferred: Experience with MATLAB Simulink Classes in mechanical design of electric motors, vibrations, electric drives, digital controls, power electronics Design, analysis, or test of power electronic systems and electromagnetic machines Power system design including fault analysis and protection/coordination Experience with management of suppliers to requirements. The position of a systems engineer on this team would include tasks centered around topics such as:
Requirements generation System identification and control system tuning Digital signal processing and Real-time Software Test data processing using spectral analysis tools Review and disposition of vendor engineering products Component testing and troubleshooting.
New London, CT17 days ago
Responsibilities: Candidates best suited for this position will possess a passion for learning, teamwork, and being taught in the principles of electrical control systems, current control, and electric drives while assisting in the management of suppliers to deliver requirement compliant components for validation and use in the ship test program. The Integrated Power Systems Advanced Current Compensation team in (Department 489) supports new technology development for the electric drive propulsion control system.
Groton, Connecticut7 days ago
p style="margin:0px">Responsibilities: Candidates best suited for this position will possess a passion for learning, teamwork, and being taught in the principles of electrical control systems, current control, and electric drives while assisting in the management of suppliers to deliver requirement compliant components for validation and use in the ship test program. Overview: The Integrated Power Systems Advanced Current Compensation team in (Department 489) supports new technology development for the electric drive propulsion control system.
The position of a systems engineer on this team would include tasks centered around topics such as: Requirements generation System identification and control system tuning Digital signal processing and Real-time Software Test data processing using spectral analysis tools Review and disposition of vendor engineering products Component testing and troubleshooting.
Responsibilities:
Candidates best suited for this position will possess a passion for learning, teamwork, and being taught in the principles of electrical control systems, current control, and electric drives while assisting in the management of suppliers to deliver requirement compliant components for validation and use in the ship test program.
p>Qualifications Required: • High school diploma or GED equivalent • 2+ years experience in STO or Electrical Test experience • 4+ years of US Navy or Military experience will be accepted in lieu of STO/Electrical Test experience • Preferred: • Bachelor of Science in Electrical Engineering, Systems Engineering; other Engineering disciplines will be considered • Naval Nuclear Propulsion Program Experience • Current DOD Secret Clearance. Shipyard Test Organization (D272) is seeking highly motivated candidates to lead and instruct STO-Electrical Testers in the safe conduct of Virginia Class Steam and Electric Plant systems, Weapons, and Hull, Mechanical and Auxiliary systems which may include testing on Sea Trials.
p>Shipyard Test Organization (D272) is seeking highly motivated candidates for our growing backshift to lead and instruct STO-Electrical Testers in the safe conduct of Virginia Class Steam and Electric Plant systems, Weapons, and Hull, Mechanical and Auxiliary systems which may include testing on Sea Trials. Preferred: Bachelor of Science in Electrical Engineering, Systems Engineering; other Engineering disciplines will be considered Naval Nuclear Propulsion Program Experience Current DOD Secret Clearance.
Additionally, the team has a strong focus on driving the supplier deliverables, test procedures, test reports, and design to meet all applicable requirements without deviation while identifying deficiencies in the specification to apply lessons learned to future electric propulsion plant submarine topologies. Engineers in the group will assist in MPD construction support and shipboard integration at Electric Boat manufacturing facilities and test support at the Electric Boat shipyard in Groton, CT, and the IPS Compatibility Test Facility (CTF) in Philadelphia, PA.
This position is for a systems engineer to primarily serve as engineering oversite for our Middletown, RI component supplier; working to ensure the not just the satisfactory delivery of components, but to advise and enforce the suppliers engagement in industry best practices. Willingness for near continuous on-site presence at the vendor facilities in Middletown, RI for test witnessing, model design and analysis review, and management of vendor progress/activities to program milestones.
Other focus area includes various levels of data analysis, research and development, supporting the management of a fully dynamic team, support test programs and troubleshooting efforts etc. In this role, you will be responsible for the design, analysis, modeling, and optimization of electric drive and other power & electromechanical systems, focusing on all aspects including its control system and power circuitry.
p>Department 489 COLUMBIA Class Integrated Power Systems (IPS) - is looking for an experienced engineer to lead procurement, design, manufacture, test, and delivery of main propulsion machinery (specifically the Main Propulsion Motor (MPM)) for the state-of-the-art electric drive propulsion system on the COLUMBIA Class submarine while mentoring a team of entry level engineers to develop them into experienced and effective senior engineers. A challenging system engineering opportunity exists within the IPS organization to support MPM shipboard integration by interfacing with mechanical/electrical design details, onsite construction/operations readiness, and qualification/production test troubleshooting.
Groton, Connecticut5 days ago
In addition, engineers will be expected to work on any and all aspects of the build of this laboratory including but not limited to, facilities upgrades, managing project schedules, analyzing test data, writing test reports, mechanical design and build of control cabinetry, and inventory management. Independent Research and Development (IRAD): Engineers working on our IRAD project will have the opportunity to explore new designs and techniques in order to help deliver the next-generation of electric propulsion motor drives.
p>The Integrated Power Systems (IPS) Labs, Emulators and Advanced Technology team has exciting opportunities for engineers to work on some of the various projects currently underway within the department: Control Software Test Bed (CSTB): Engineers working on the CSTB project will be involved with the design, build, test and troubleshooting of a brand-new test platform for the all-electric COLUMBIA Main Propulsion System. In addition, engineers will be expected to work on any and all aspects of the build of this laboratory including but not limited to, facilities upgrades, managing project schedules, analyzing test data, writing test reports, mechanical design and build of control cabinetry, and inventory management.
New London, CT12 days ago
p>The Integrated Power Systems (IPS) Labs, Emulators and Advanced Technology team has exciting opportunities for engineers to work on some of the various projects currently underway within the department: Control Software Test Bed (CSTB): Engineers working on the CSTB project will be involved with the design, build, test and troubleshooting of a brand-new test platform for the all-electric COLUMBIA Main Propulsion System. In addition, engineers will be expected to work on any and all aspects of the build of this laboratory including but not limited to, facilities upgrades, managing project schedules, analyzing test data, writing test reports, mechanical design and build of control cabinetry, and inventory management.
In this role, you will be responsible for the design, analysis, modeling, and optimization of electric drive and other power & electromechanical systems, focusing on all aspects including its control system and power circuitry. Team Collaboration and Communication: Ability to work effectively in cross-functional teams, collaborating with electrical, mechanical, software, and test engineers.
New London, CT30+ days ago
Other focus area includes various levels of data analysis, research and development, supporting the management of a fully dynamic team, support test programs and troubleshooting efforts etc. In this role, you will be responsible for the design, analysis, modeling, and optimization of electric drive and other power & electromechanical systems, focusing on all aspects including its control system and power circuitry.
li>Support Electric Boat development of design deliverables from every technical discipline (e.g.structural, mechanical, electrical) for modification of the COLUMBIA Class design to facilitate construction and test evolutions within the Electric Boat shipyard and Government test facilities. Management of commercial vendors finalizing the design of test facilities at Government shipyards and test facilities where portions of the COLUMBIA Class submarine will be built or tested.
Department 489 COLUMBIA Class Integrated Power Systems (IPS) - is looking for a highly motivated and dynamic engineer to lead procurement, design, manufacture, test, and delivery of main propulsion machinery (specifically the Main Propulsion Motor (MPM)) for the state-of-the-art electric drive propulsion system on the COLUMBIA Class submarine. A challenging system engineering opportunity exists within the IPS organization to support MPM shipboard integration by interfacing with mechanical/electrical design details, onsite construction/operations readiness, and qualification/production test troubleshooting.
p>Required: • Bachelor and/or Masters of Science degree in Engineering, Electrical, Mechanical, Marine, Physics, Aeronautical, Systems, Biomedical or Robotics Engineering • 5+ years of post graduate professional engineering experience • Ability to obtain and maintain a DoD Secret security clearance. Engineering positions require self-management skills to coordinate and interface with shipyard testing, shipyard trades, material suppliers, other engineering organizations, Navy shipyards, Navy forces afloat, Supervisor of Shipbuilding, Strategic Systems Programs, and NAVSEA.
Groton, Connecticut10 days ago
Engineering positions require self-management skills to coordinate and interface with shipyard testing, shipyard trades, material suppliers, other engineering organizations, Navy shipyards, Navy forces afloat, Supervisor of Shipbuilding, Strategic Systems Programs, and NAVSEA. Experience and proficiency with three or more of the following: - Instrumentation equipment (O-scopes, Spectrum Analyzers, etc), LabVIEW, Dspace, MATLAB, Data Physics, Simulink, ANSYS, JMAG, FLUX2D/3D, COMSOL, PLC Programming, and other data acquisition, simulation, or control systems.
New London, CT17 days ago
p>Department 489 - COLUMBIA Class Integrated Power Systems (IPS) - is looking for an experienced engineer to lead procurement, design, manufacture, test, and delivery of main propulsion machinery (specifically the Main Propulsion Motor (MPM)) for the state-of-the-art electric drive propulsion system on the COLUMBIA Class submarine while mentoring a team of entry level engineers to develop them into experienced and effective senior engineers. A challenging system engineering opportunity exists within the IPS organization to support MPM shipboard integration by interfacing with mechanical/electrical design details, onsite construction/operations readiness, and qualification/production test troubleshooting.
New London, CT20 days ago
Department 489 - COLUMBIA Class Integrated Power Systems (IPS) - is looking for a highly motivated and dynamic engineer to lead procurement, design, manufacture, test, and delivery of main propulsion machinery (specifically the Main Propulsion Motor (MPM)) for the state-of-the-art electric drive propulsion system on the COLUMBIA Class submarine. A challenging system engineering opportunity exists within the IPS organization to support MPM shipboard integration by interfacing with mechanical/electrical design details, onsite construction/operations readiness, and qualification/production test troubleshooting.
Groton, Connecticut7 days ago
Overview: Department 489 – COLUMBIA Class Integrated Power Systems (IPS) - is looking for an experienced engineer to lead procurement, design, manufacture, test, and delivery of main propulsion machinery (specifically the Main Propulsion Motor (MPM)) for the state-of-the-art electric drive propulsion system on the COLUMBIA Class submarine while mentoring a team of entry level engineers to develop them into experienced and effective senior engineers.
A challenging system engineering opportunity exists within the IPS organization to support MPM shipboard integration by interfacing with mechanical/electrical design details, onsite construction/operations readiness, and qualification/production test troubleshooting.
Opportunities are available for Electrical, Mechanical and other engineers within D465, the Electrical Components Department, to develop various engineered components for submarine applications working with other Electric Boat, Navy, and outside supplier personnel. Supporting development of associated technical documentation including: technical manuals operating instructions, ship system manuals, test forms, repair parts lists, procurement specifications, etc.
New London, CT18 days ago
li>Experience with any of the following preferred: DC power supply design, cathodic protection theory, electric field theory, software development, electronics design, active and passive cathodic protection design. Responsibilities include the following:
- Lead coordination efforts between system engineering, configuration management, system administrator, software developers, quality assurance, and software test as applicable.
General Dynamics Mission Systems (GDMS) engineers a diverse portfolio of high technology solutions, products and services that enable customers to successfully execute missions across all domains of operation. We are seeking an experienced Tech Lead Software & Systems Integrator III to lead integration efforts across complex multi-platform systems.
New London, CT30+ days ago
Successful applicant will be required to assist in the System Engineering efforts ranging from initial system design through development, hardware/software integration, component qualification, test, construction support, delivery, and post-delivery support to include analysis and resolution of fleet identified problems, assessment of obsolescence issues, and identification of components for technical refresh. System Engineering efforts related to contractor furnished SONAR systems include the Large Vertical Array (LVA), Bow Conformal Array (BCA), Integrated Search and Survey (ISS), as well as various developmental systems and Government Furnished Equipment (GFE) SONAR sensors, arrays, and components.