Mechanical Design Engineer Actalent IncMechanical Design EngineerCT$41–$44 / hourWe are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing winner for both client and talent service. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.
Principal Design Engineer - Mechanical Systems (Onsite) RTX CorpPrincipal Design Engineer - Mechanical Systems (Onsite)East Hartford, CTAs the focal point for major technical issues within the CIPT, you will collaborate closely with the Integrated Program Management Team (IPMT), System Integrated Product Team (SIPT), Chief Engineers, and customers to communicate progress, mitigate risks, and deliver innovative, high-quality engineering solutions. Department/Segment Overview: Mechanical Systems, Externals, & Nacelles (MSEN): The MSEN organization is responsible for the design, development, and in-service support of power transmission systems, bearing compartment and rotor support design and analysis, oil and thermal management systems, engine externals packaging and architecture, as well as nacelles for commercial and military engine models.
Principal Design Engineer - Mechanical Systems (Onsite) RTXPrincipal Design Engineer - Mechanical Systems (Onsite)East Hartford, ConnecticutAs the focal point for major technical issues within the CIPT, you will collaborate closely with the Integrated Program Management Team (IPMT), System Integrated Product Team (SIPT), Chief Engineers, and customers to communicate progress, mitigate risks, and deliver innovative, high-quality engineering solutions. Department/Segment Overview : Mechanical Systems, Externals, & Nacelles (MSEN) : The MSEN organization is responsible for the design, development, and in-service support of power transmission systems, bearing compartment and rotor support design and analysis, oil and thermal management systems, engine externals packaging and architecture, as well as nacelles for commercial and military engine models.
Electrical Design Engineer Whelen Engineering Co IncElectrical Design EngineerChester, CTDescription: Duties and ResponsibilitiesGeneral and specialized circuit and system designAnalysis of general and specialized components circuits signals and systemsCircuit simulation using SPICE modelingSchematic capture using Altium DesignerHardware and system development and integrationHardware troubleshooting and analysisEmbedded firmware development primarily in embedded CC programming languages using various IDEs IAR Embedded Workbench Visual Studio Code etc. Must be proficient in knowledge and design of common electronic circuits including but not limited to transistor and FET amplifiers solid-state switches biasing circuits bridges rectifiers filters digital and analog IO circuits current sources and linear and switching regulators.
Design Engineer II, Tooling Kaman CorporationDesign Engineer II, ToolingMiddletown, CTFor more than 85 years, our team at Precision Fuzing and Sensors has designed, tested, and manufactured the fuzing and sensor systems that defense programs depend on - delivering mission-critical reliability from a single, vertically integrated facility in Middletown, Connecticut. Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, or a related field.2-5 years of experience in tooling design, manufacturing engineering, or a related role, preferably in an assembly or production environment.
NewPrincipal Additive Manufacturing Design Engineer RaytheonPrincipal Additive Manufacturing Design EngineerEast Hartford, CTThe Additive ManufacturingProcess and Capability Center (AMPCC) encompasses a critical mass of Additive Manufacturing (AM) process and industrialization experts, the necessary equipment, and develops the strategic collaborations needed to rapidly mature the technology and manufacturing readiness of AM. Typically requires a University Engineering Degree or equivalent experience and minimum 8 years prior relevant experience, or an Advanced Degree in a related field and minimum 5 years experience.
NewPrincipal Additive Manufacturing Design Engineer RTXPrincipal Additive Manufacturing Design EngineerEast Hartford, CTCandidate must be able to work effectively in a multidisciplinary, collaborative team environment focused on innovation and have demonstrated both verbal and written communication skills including: Typically requires a University Engineering Degree or equivalent experience and minimum 8 years prior relevant experience, or an Advanced Degree in a related field and minimum 5 years experience. The Additive Manufacturing Process and Capability Center (AMPCC) encompasses a critical mass of Additive Manufacturing (AM) process and industrialization experts, the necessary equipment, and develops the strategic collaborations needed to rapidly mature the technology and manufacturing readiness of AM.
Design Engineer AMETEK IncDesign EngineerWesterly, RIKey Responsibilities: Work with customers (internal and external) to develop and document complex products for harsh subsea environment applications that meet performance requirements at the expected product cost, project budget and timeline. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.5 billion.
Principal Additive Manufacturing Design Engineer RTX CorpPrincipal Additive Manufacturing Design EngineerEast Hartford, CTCandidate must be able to work effectively in a multidisciplinary, collaborative team environment focused on innovation and have demonstrated both verbal and written communication skills including: Typically requires a University Engineering Degree or equivalent experience and minimum 8 years prior relevant experience, or an Advanced Degree in a related field and minimum 5 years experience. The Additive Manufacturing Process and Capability Center (AMPCC) encompasses a critical mass of Additive Manufacturing (AM) process and industrialization experts, the necessary equipment, and develops the strategic collaborations needed to rapidly mature the technology and manufacturing readiness of AM.
NewGTF Diffuser Combustor Design Sr. Principal Engineer P5 (Onsite) RTX CorpGTF Diffuser Combustor Design Sr. Principal Engineer P5 (Onsite)East Hartford, CTHot Section Engineering is responsible for the design, development, technology maturation and in service support of all diffuser cases, combustors, turbines (vanes, blades, rotors and cases), augmenters (military), nozzles and associated fuel systems for all military, commercial and industrial engine models and radial auxiliary power units. Depending on the phase of the program, the tasks will vary, but may include clean sheet design, delivering development hardware to test engines, facilitating the delivery of hardware to production engines, processing engineering changes to improve the production configuration, and support of fielded engines.
Cable Design Engineer Prysmian SpACable Design EngineerWillimantic, CTWith Diversity, Equity, and Inclusion (DE&I) as part of our Social Ambition 2030 and a strategic pillar of our Company culture, Prysmian is committed to the development of an organization that prioritizes talent, where people feel respected, included, and free to fully express their potential just as they are. Each year, the company manufactures thousands of miles of underground and submarine cables and systems for power transmission and distribution, as well as medium low voltage cables for the construction and infrastructure sectors.
NewGTF Diffuser Combustor Design Sr. Principal Engineer P5 (Onsite) RTXGTF Diffuser Combustor Design Sr. Principal Engineer P5 (Onsite)East Hartford, ConnecticutHot Section Engineering is responsible for the design, development, technology maturation and in service support of all diffuser cases, combustors, turbines (vanes, blades, rotors and cases), augmenters (military), nozzles and associated fuel systems for all military, commercial and industrial engine models and radial auxiliary power units. Depending on the phase of the program, the tasks will vary, but may include clean sheet design, delivering development hardware to test engines, facilitating the delivery of hardware to production engines, processing engineering changes to improve the production configuration, and support of fielded engines.
Controls Systems Design Engineer American Systems CorpControls Systems Design EngineerNorwich, CTWe are seeking an Electrical Engineer with strong controls engineering and LabVIEW experience to support the design, integration, and testing of industrial and maritime control systems. AMERICAN SYSTEMS provides for the welfare of its employees and their dependents through a comprehensive benefits program by offering healthcare benefits, paid leave, retirement plans, insurance programs, and education and training assistance.
NewPrincipal Additive Manufacturing Design Engineer Raytheon TechnologiesPrincipal Additive Manufacturing Design EngineerEast Hartford, CTCandidate must be able to work effectively in a multidisciplinary, collaborative team environment focused on innovation and have demonstrated both verbal and written communication skills including: Typically requires a University Engineering Degree or equivalent experience and minimum 8 years prior relevant experience, or an Advanced Degree in a related field and minimum 5 years experience. The Additive Manufacturing Process and Capability Center (AMPCC) encompasses a critical mass of Additive Manufacturing (AM) process and industrialization experts, the necessary equipment, and develops the strategic collaborations needed to rapidly mature the technology and manufacturing readiness of AM.
NewSenior Engineer - Carbon Seal Design & Analysis (Onsite) RTXSenior Engineer - Carbon Seal Design & Analysis (Onsite)East Hartford, ConnecticutDepartment/Segment Overview : Mechanical Systems, Externals, & Nacelles (MSEN) : The Mechanical Systems, Externals, and Nacelles Engineering organization is responsible for the design, development, and in-service support of power transmission systems, bearing compartment and rotor support design and analysis, oil and thermal management systems, engine externals packaging and architecture, as well as nacelles for commercial and military engine models. Drive cross-functional engineering initiatives by collaborating with suppliers, customers, and internal engineering disciplines to develop innovative sealing solutions, resolve technical challenges, and support new product development and legacy engine programs.
NewSenior Engineer - Carbon Seal Design & Analysis (Onsite) RTX CorpSenior Engineer - Carbon Seal Design & Analysis (Onsite)East Hartford, CTDepartment/Segment Overview: Mechanical Systems, Externals, & Nacelles (MSEN): The Mechanical Systems, Externals, and Nacelles Engineering organization is responsible for the design, development, and in-service support of power transmission systems, bearing compartment and rotor support design and analysis, oil and thermal management systems, engine externals packaging and architecture, as well as nacelles for commercial and military engine models. Drive cross-functional engineering initiatives by collaborating with suppliers, customers, and internal engineering disciplines to develop innovative sealing solutions, resolve technical challenges, and support new product development and legacy engine programs.
Sr Engineer, Design Engineering (Onsite) RTXSr Engineer, Design Engineering (Onsite)East Hartford, ConnecticutThe role will provide an opportunity take on a design lead role for Rotors, and work within the team and IPT to drive improvements in design, address technical issues, support production ramp, and engage with multiple disciplines in support of the aforementioned. Support Production and devl Quality Notifications including, creating PPT packages, executing non-conformance analysis, working with required disciplines to determine acceptability, disposition, documentation, and QN closure.
Cable Design & Specification Engineer Prysmian S.P.A.Cable Design & Specification EngineerWillimantic, CTWith Diversity, Equity, and Inclusion (DE&I) as part of our Social Ambition 2030 and a strategic pillar of our Company culture, Prysmian is committed to the development of an organization that prioritizes talent, where people feel respected, included, and free to fully express their potential just as they are. Experience interpreting complex specifications - ability to analyze multiple industry, customer, and internal specs, determine the most stringent requirements, and assess compliance (Specification Engineering experience).
NewGTF Diffuser Combustor Design Sr. Engineer P3 (Onsite) RTXGTF Diffuser Combustor Design Sr. Engineer P3 (Onsite)East Hartford, ConnecticutHot Section Engineering is responsible for the design, development, technology maturation and in service support of all diffuser cases, combustors, turbines (vanes, blades, rotors and cases), augmenters (military), nozzles and associated fuel systems for all military, commercial and industrial engine models and radial auxiliary power units. Lead a team of designers executing on key deliverables in support GTF diffuser & combustor milestones including executing on class I ECs, responding to field events and investigations, identifying opportunities for product improvement changes, integrating across modules.
Sr Engineer, Design Engineering (Onsite) RTX CorpSr Engineer, Design Engineering (Onsite)EAST HARTFORD, CTSupport Production and devl Quality Notifications including, creating PPT packages, executing non-conformance analysis, working with required disciplines to determine acceptability, disposition, documentation, and QN closure. The role will provide an opportunity take on a design lead role for Rotors, and work within the team and IPT to drive improvements in design, address technical issues, support production ramp, and engage with multiple disciplines in support of the aforementioned.
Project Engineer - Instrumentation Design Engineering (Onsite) RTX CorpProject Engineer - Instrumentation Design Engineering (Onsite)Middletown, CTThe position requires excellent communication and team leadership skills as well as the ability to operate across a wide range of disciplines and management levels with both internal and external customers to ensure that task requirements are met. The designs include major station probes, blade tip clearance probes, optical blade tip timing probes, slip rings, fan blade out packages & telemetry packages.
NewGTF Diffuser Combustor Design Sr. Engineer P3 (Onsite) RTX CorpGTF Diffuser Combustor Design Sr. Engineer P3 (Onsite)EAST HARTFORD, CTHot Section Engineering is responsible for the design, development, technology maturation and in service support of all diffuser cases, combustors, turbines (vanes, blades, rotors and cases), augmenters (military), nozzles and associated fuel systems for all military, commercial and industrial engine models and radial auxiliary power units. What you Will Do: Lead a team of designers executing on key deliverables in support GTF diffuser & combustor milestones including executing on class I ECs, responding to field events and investigations, identifying opportunities for product improvement changes, integrating across modules.
NewPrin Engineer, Design Engineering (Onsite) RTX CorpPrin Engineer, Design Engineering (Onsite)Middletown, CTDesign and review layouts of components, calculate stack-up of detail components, and perform major cost studies consisting of new or existing details and/or marked prints and all supporting documentation, when necessary, to facilitate operations and ensure that established objectives and budgets are achieved. Design support across all phases of the design cycle, preliminary through detailed design, validation, manufacturing, and operational service and will work on the designs of any component within the Fan/LPC and/or HPC modules (i.e. Rotors, airfoils, cases, frames, kinematics, etc…).
NewTooling Engineer II: Design, GD&T & Production Impact KamanTooling Engineer II: Design, GD&T & Production ImpactMiddletown, CTThis position demands strong communication skills and attention to detail, offering a dynamic work environment focused on innovation and continuous improvement.#J-18808-Ljbffr. In this role, you will design tooling and fixtures, ensure operational reliability, and manage small to medium tooling projects.
NewAerospace Tool Design Engineer - Onsite Pratt & WhitneyAerospace Tool Design Engineer - OnsiteEast Hartford, CT$86,800–$165,200 / yearA leading aerospace company in East Hartford, CT is looking for a Tool Design Engineer to develop and present repair tool designs for Military Engine programs. Candidates must have a Bachelor's degree in a relevant field and 5+ years of experience or 3+ years with an Advanced degree.
NewManufacturing Design Engineer - Propulsion Hardware Strativ GroupManufacturing Design Engineer - Propulsion HardwareManchester, CTCandidates should have over 6 years of experience in manufacturing engineering and strong skills in CAD and drawing interpretation. You will connect Design Engineering with production, assess manufacturability, and improve manufacturing processes.
Civil Engineer – Roadway / Highway Design Garg Consulting Services, Inc.Civil Engineer – Roadway / Highway DesignRocky Hill, CT$85,000–$125,000 / yearFull timeGarg Consulting Services, Inc. (Garg) is a leading multidisciplinary engineering and construction management firm specializing in transportation infrastructure, roadway design, and DOT projects throughout the Northeast. Construction Phase Services: Provide construction-phase services and technical support during design-build or conventional delivery projects.
NewSenior Electrical Design Engineer BridgeSenior Electrical Design EngineerMiddletown, CTSenior Technical Recruiter/Account Manager at Bridge Technical TalentThis is a permanent full-time role for a Senior Electrical Design Engineer and must be worked on site daily in Middletown, CT.Key QualificationsCandidates MUST have experience with design and development of analog, digital, and mixed-signal electronic circuits for Aerospace applications.
Design Engineer Town of ManchesterDesign EngineerManchester, CT$87,878.46–$101,742.45 / yearThe Town of Manchester is a vibrant and diverse community with an array of public services that reflect a set of values shared by its residents and leaders committed to bringing Manchester into the 21st century as an up-and-coming community that cares about its residents, its children, its schools and parks, its roads and utilities, and the health and safety of the Manchester Community. Within the Engineering Design Unit of the Public Works Department, and under the general direction of the Assistant Town Engineer, perform advanced level engineering, administrative and technical design work involving the application of professional engineering skills and knowledge in a variety of municipal public works and water and sewer activities.
NewSenior Electrical Design Engineer - Aerospace On-Site BridgeSenior Electrical Design Engineer - Aerospace On-SiteMiddletown, CTThis role requires expertise in designing and developing analog, digital, and mixed-signal electronic circuits specifically for aerospace applications. A leading technical staffing agency is seeking a Senior Technical Recruiter/Account Manager for a full-time position.
NewAirfoil Tool Design Lead Engineer Pratt & WhitneyAirfoil Tool Design Lead EngineerEast Hartford, CTThis role involves developing high-quality applications for the engineering organization, translating technical needs into requirements, and driving improvements in methods processes. Eligible candidates will enjoy relocation benefits, competitive salary, and comprehensive insurance offerings.#J-18808-Ljbffr.
Mechanical Engineer GpacMechanical EngineerRocky Hill, CT100000–130000GPAC (Growing People and Companies) is an award-winning search firm specializing in placing quality professionals within multiple industries across the United States since 1990. We are extremely competitive, client-focused and realize that our value is in our ability to deliver the right solutions at the right time.
Manager, Projects II (Design) (2 Positions) University of Rhode IslandManager, Projects II (Design) (2 Positions)Kingston, RI$90,000–$105,000 / yearAbout URI The University of Rhode Island enrolls approximately 17,000 students across its graduate and undergraduate programs and is the States flagship public research university as well as the land grant and sea grant university for the state of Rhode Island. In furtherance of its mission to serve and support all learners as the States public flagship university, URI continues to expand efforts to recruit and retain a broadly representative workforce as well as to regularly evaluate the effectiveness of those efforts.
Engineer I Mechanical- Nuclear Zachry Holdings, IncEngineer I Mechanical- NuclearCTEngineer I, Mechanical must possess technical knowledge of mechanical discipline and ability to work on project teams with other engineers to assist in evaluating conditions and developing design changes which will improve plant performance, safety, and reliability. position Synopsis: Engineer I, Mechanical will be relied upon to perform a variety of engineering and design activities involving power plant upgrades and/or new power plant projects under the supervision of senior engineering staff.
Mechanical Engineer III Whelen Engineering Co IncMechanical Engineer IIIChester, CTEducation and Experience BS degree in Mechanical Engineering or a related engineering field w 8 years experience or MAMS degree w5-6 years experienceExperience with Solidworks Simulation & Solidworks Flow Simulation CFDBackground in Structural Analysis & Thermal AnalysisExperience using FEM for stressdeflection vibration and performing LCF HCF Fracture Mechanics or Kinematics analysesFamiliarity with Matlab or Python or equivalent for developing analytical models and performing data acquisition & post-processingExperience with performing test-model correlation and test based characterization of critical modelling input parametersProficient knowledge of materials and manufacturing processesProficient with Microsoft Word Excel and PowerPointActive userexperience with engineering software including SolidWorks AutoCAD or equivalentExperience with PDM and PLM software and processes is also preferred. This ability to communicate requires the employee to be conversant in English as the majority of our workforce and the third parties that we encounter only speak English.
Senior Mechanical Engineer | Rotating Equipment Michael Page InternationalSenior Mechanical Engineer | Rotating EquipmentManchester, Connecticut$110,000–$130,000 / yearFull timeMechanical EngineerOur client is a global powerhouse in integrated technology solutions, revolutionizing how companies design, develop, and manufacture products made from textiles by automating, accelerating, and seamlessly streamlining every step of the process. MPI encourages applications from minorities, women, the disabled, protected veterans and all other qualified applicants.
Manager, PX, GWE, Utilities Operations Lead Mechanical Engineer Pfizer IncManager, PX, GWE, Utilities Operations Lead Mechanical EngineerCT$99,200–$165,400 / yearThe multi-building campus is comprised of 2.3M SQFT supporting an occupancy of ~2,200 colleagues and contractors and has the greatest concentration of specialty operations in the R&D network consisting of small molecule clinical manufacturing, GxP and non-regulated laboratories, vivarium, technical space (central utility plant), and office workspace facilities. This role ensures safe, compliant, and reliable operation of central utility infrastructure, including cogeneration, steam, chilled water, compressed air, water, industrial gas systems, HVAC, high purity water, laboratory gases and other systems that support building, laboratory and manufacturing operations.
Manager, PX, Gwe, Utilities Operations Lead Mechanical Engineer PfizerManager, PX, Gwe, Utilities Operations Lead Mechanical EngineerGroton, CT$99,200–$165,400 / yearThe multi-building campus is comprised of 2.3M SQFT supporting an occupancy of ~2,200 colleagues and contractors and has the greatest concentration of specialty operations in the R&D network consisting of small molecule clinical manufacturing, GxP and non-regulated laboratories, vivarium, technical space (central utility plant), and office workspace facilities. This role ensures safe, compliant, and reliable operation of central utility infrastructure, including cogeneration, steam, chilled water, compressed air, water, industrial gas systems, HVAC, high purity water, laboratory gases and other systems that support building, laboratory and manufacturing operations.
Plumbing and Fire Protection Engineer Garg Consulting Services, Inc.Plumbing and Fire Protection EngineerRocky Hill, CT$135,000–$180,000 / yearFull timeFounded in 1990 and headquartered in Rocky Hill, CT, with an office in Princeton, NJ, Garg employs over 100 professionals delivering high-profile rail and transit infrastructure projects. Garg Consulting Services, Inc. (Garg) is a multidisciplinary engineering firm specializing in railroad and transit construction projects across the Northeast.
Mechanical Support Engineer Actalent IncMechanical Support EngineerEast Hartford, CT$40–$55 / hourYou will work as part of a small-to-medium-sized technical support and customer operations team, regularly collaborating with Customer Managers, Design Engineering, Product Support Engineering, Quality, Manufacturing Engineering, Program Management, and Field Service teams. The successful candidate coordinates closely with engineering, program teams, customers, and engine overhaul facilities to resolve technical issues, develop and interpret technical data, and support the fleet throughout the product lifecycle.
Engineer Senior Mechanical Electric Boat CorpEngineer Senior MechanicalNew London, CTDepartment 492 engineers work to advance submarine design and provide engineering support for the development, procurement, installation and test of complex mechanical systems including items such as hatches and doors, weapons/payload systems, ocean interfaces, hydraulic actuators, motors and gearboxes, linkages, and other future capability assessments. Senior level engineers mentor new engineers, provide technical oversight and fluently interface with engineers from all engineering disciplines, designers, shipbuilders, trades, suppliers, Navy Labs and NAVSEA customer personnel.
Engineer IV Mechanical Zachry Holdings, IncEngineer IV MechanicalCTSuperior technical knowledge of mechanical discipline and ability to work on project teams with other engineers to evaluate conditions and develop design changes which will improve plant performance, safety and reliability. Past experience with feasibility studies, equipment reliability issues, system modifications and upgrades to improve safety and reliability desired.
Engineer I/II - D425 Hull, Mechanical & Electrical Systems General Dynamics CorpEngineer I/II - D425 Hull, Mechanical & Electrical SystemsGroton, CTAs a software engineer supporting HM&E systems, youll be part of an engineering team that designs, develops, integrates, and tests shipboard software for multiple submarine platforms. General Dynamics Electric Boat is a recognized leader in the design, construction and lifecycle support of submarines for the United States Navy.
Senior Software Engineer - D425 Hull, Mechanical & Electrical Systems General Dynamics CorpSenior Software Engineer - D425 Hull, Mechanical & Electrical SystemsGroton, CTAs a Senior Software Engineer supporting HM&E systems, youll be part of an engineering team that designs, develops, integrates, and tests shipboard software for multiple submarine platforms. General Dynamics Electric Boat is a recognized leader in the design, construction and lifecycle support of submarines for the United States Navy.
Mechanical Engineer I American Systems CorpMechanical Engineer INorwich, CTAMERICAN SYSTEMS is an employee-owned federal government contractor supporting national priority programs through our strategic solutions in the areas of Information Technology, Test & Evaluation, Program Mission Support, Engineering & Analysis, and Training. AMERICAN SYSTEMS provides for the welfare of its employees and their dependents through a comprehensive benefits program by offering healthcare benefits, paid leave, retirement plans, insurance programs, and education and training assistance.
Mechanical Engineer II American Systems CorpMechanical Engineer IINorwich, CTAMERICAN SYSTEMS is an employee-owned federal government contractor supporting national priority programs through our strategic solutions in the areas of Information Technology, Test & Evaluation, Program Mission Support, Engineering & Analysis, and Training. AMERICAN SYSTEMS provides for the welfare of its employees and their dependents through a comprehensive benefits program by offering healthcare benefits, paid leave, retirement plans, insurance programs, and education and training assistance.
NewEngineer I - Mechanical General Dynamics Electric BoatEngineer I - MechanicalGroton, ConnecticutFull timeFrequent interface will be required with multiple Electric Boat engineering and support disciplines, vendors, Newport News Shipbuilding, Naval Sea Systems Command (NAVSEA), Shipyard Personnel (Trades) and Ship’s Force (active-duty Navy). Overview: As a Main Propulsion Machinery Engineer, you will be responsible for project management and oversight of design, development, procurement, ship integration, test and repair and fleet support activities for components associated with fast-attack submarine classes.
CDS Mechanical Controls Product Center, Principal Engineer P4 (Onsite) RTX CorpCDS Mechanical Controls Product Center, Principal Engineer P4 (Onsite)East Hartford, CTThe successful candidate will lead the end-to-end requirements lifecycle across complex mechanical systems, partnering closely with suppliers, design teams, Systems Engineering, Software Engineering, Manufacturing, Quality, and program leadership to develop robust component solutions. What you Will Do: The Control System Engineering & Electrification (CSEE) organization is seeking a Mechanical Controls Hardware Systems Engineer with strong technical, communication and teamwork skills.
CDS Mechanical Controls Product Center, Senior Engineer P3 (Onsite) RTX CorpCDS Mechanical Controls Product Center, Senior Engineer P3 (Onsite)East Hartford, CTCSEE engineering work the entire system life cycle from 1) control system technology development, 2) interpreting customer requirements, decomposing them to hardware and software, 3) technical and project oversight of hardware implementation, to 4) ensuring control system compliance across engine, flight and customer compliance testing, and finally, 5) leading system and hardware field issue triage and resolution. The CDS CSEE is responsible for the end- to-end CDS systems Engineering Value Stream covering four sub-disciplines: System Architecture, Requirements & Validation (SARV), Electric Propulsion Systems Engineering (EPSE), Hardware Sub-systems Requirements & Validation (HWSS) and Engine & Flight Test (E&FT).
Engineer V Mechanical Zachry Holdings, IncEngineer V MechanicalCTSuperior technical knowledge of mechanical discipline and ability to work on project teams with other engineers to evaluate conditions and develop design changes which will improve plant performance, safety and reliability. Past experience with feasibility studies, equipment reliability issues, system modifications and upgrades to improve safety and reliability desired.