351 Results for

Manufacturing Engineer Jobs in Groton, CT

Jobs

Manchester, CT30+ days ago

Full-time

With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.

New!

Glastonbury, CT6 days ago

$115,000–$150,000

p> Determining compensation for this role (and others) at Vaco by Highspring depends upon a wide array of factors including but not limited to:

the individual’s skill sets, experience and training;
licensure and certification requirements;
office location and other geographic considerations;
other business and organizational needs. Determining compensation for this role (and others) at Vaco/Highspring depends upon a wide array of factors including but not limited to the individual’s skill sets, experience and training, licensure and certifications, office location and other geographic considerations, as well as other business and organizational needs.

Manchester, CT30+ days ago

Full-time

To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at www.howmet.com/esg-report . With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world.

New!

Middletown, CT6 days ago

p>For more than 85 years, our team at Precision Fuzing and Sensors has designed, tested, and manufactured the fuzing and sensor systems that defense programs depend on - delivering mission-critical reliability from a single, vertically integrated facility in Middletown, Connecticut. This role is responsible for the development and implementation of manufacturing plans and processes for new programs, and support of current manufacturing programs to achieve cost reductions, improved quality and an efficient delivery schedules.

West Warwick, RI30+ days ago

Full-time

This role supports a high-mix, welded tank fabrication environment with a focus on supporting daily production, resolving constraints, improving safety, quality, delivery, and cost, and leading capital and continuous improvement projects from concept through execution. The Manufacturing Engineer is a shop‑floor-first engineering role focused on executing safe, capable, and compliant manufacturing processes for ASME pressure vessels and engineered products.

Westbrook, CT24 days ago

$85,000–$110,000 Per Year

The role works closely with engineering, quality, and production teams to solve complex manufacturing challenges and optimize machining and assembly operations. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

New!

CT6 days ago

$85,000–$125,000 Per Year

See our Privacy Notice for Candidates and Employees/Contractors at https://smgroupna.com/privacy-notice-for-candidates-and-employees-contractors.

These are the qualifications that matter (Requirements & Job Duties):

Bachelor's degree in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, or related field (or equivalent experience).

CT8 days ago

p>This is a front line engineering position in the Waterfront Engineering Directorate requiring the selected candidates to frequently interface with trades personnel in an active construction environment troubleshooting complex fabrication, assembly and major move activities. As demand for cutting-edge naval technology grows, General Dynamics Electric Boat is at the forefront-designing, building, and maintaining the most advanced submarines in the world.

West Warwick, RI30+ days ago

Product brands within the Worthington Enterprises portfolio include Balloon Time, Bernzomatic, Coleman (propane cylinders), CoMet, Elgen, Garden Weasel, General, HALO, Hawkeye, Level5 Tools, Mag Torch, NEXI, Pactool International, PowerCore, Ragasco, Well-X-Trol and XLite, among others. This role supports a high-mix, welded tank fabrication environment with a focus on supporting daily production, resolving constraints, improving safety, quality, delivery, and cost, and leading capital and continuous improvement projects from concept through execution.

CT30+ days ago

To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at www.howmet.com/esg-report. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world.

Norwich, CT30+ days ago

p>Oversee the production process in a manufacturing environment and designs, develops and implements new or revised production process to ensure quality and efficiency for the mass production of goods.

Coordinates activities with internal tooling and/or automation engineers to create/ensure the ability to manufacture products on a production scale.

Columbia, CT30+ days ago

Full-time

Glastonbury, CT8 days ago

$90,000–$118,000 Per Year

Activities include development of drawings, measurement and material evaluation of OEM parts using state-of-art equipment and techniques, data analysis, structural analysis, preparation of design substantiation packages, manufacturing development, hardware conformity and customer evaluation support. The Senior Project/Manufacturing Engineer will:

Manage project efforts to achieve FAA Approval on assigned hardware.

East Hartford, Connecticut19 days ago

Not Required

At RTX, the world's largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world’s most complex problems. Pratt & Whitney is seeking a highly skilled Welding & Brazing Manufacturing Engineer to lead and support advanced joining technologies, primarily for Original Equipment Manufacturer (OEM) operations, with additional support for Maintenance Repair Operations (MRO) activities.

Middletown, CT30+ days ago

As a key member of the Integrated Product Team (IPT), and the primary manufacturing point-of-contact (POC) for a specific part family, engage Process Manufacturing Engineers, Design Engineers, Project Engineers, Quality Engineers, and Structural Engineers to perform Root Cause analysis and implement appropriate Corrective Actions. The Senior Product Manufacturing Engineer will provide support to CSMC manufacturing operations and drive improvement for increasing first pass yield using MRL tools such as PFMEA, Process Map, Control Plan, Gage R&R and rigorous data analysis on Major Rotating Parts.

East Hartford, CT18 days ago

p>What You Will Do:

Pratt & Whitney is seeking a highly skilled Welding & Brazing Manufacturing Engineer to lead and support advanced joining technologies, primarily for Original Equipment Manufacturer (OEM) operations, with additional support for Maintenance Repair Operations (MRO) activities.

Enterprise-wide Pratt & Whitney business processes, including the CORE Operating System, Leadership Operating Model, and cross-functional areas such as Material Control Labs, Engineering Support to Operations, Quality, and Engineering Source Approval.

East Hartford, Connecticut30+ days ago

Not Required

At RTX, the world largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world’s most complex problems.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote..

East Hartford, Connecticut30+ days ago

At RTX, the world largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world’s most complex problems.

East Hartford, CT30+ days ago

The Product Manufacturing Engineer will be responsible for execution of COPQ Projects, shop support and execution of MRL Assessments (PFMEA, Measurement System Analysis & Control Plans among others) to improve Supplier and Internal Shop Quality and delivery signatures. Bachelor's degree in engineering with 2 years of prior relevant experience in Manufacturing Engineering, Operations, Engineering, or Quality; OR Advanced Degree with prior relevant experience via Research, Internships or COOP's.

Westbrook, CT27 days ago

$85,000–$110,000 Per Year

East Hartford, CT30+ days ago

The candidate will join the Advanced Manufacturing Team which specializes in the development, testing, optimization, and demonstration of novel manufacturing technologies for internal deployment as well as for external research programs across a variety of technical areas including additive manufacturing, robotic automation, machining, joining, welding, repair, surface treatment, sensing, amongst many others. The individual will work with the team in a fast-paced, R&D environment alongside leading scientists and colleagues from across RTRC and the greater RTX organization (including Collins Aerospace, Pratt & Whitney, and Raytheon) to conceive, develop, and demonstrate next generation technologies for Aerospace and Defense applications.

New!

Glastonbury, CT1 day ago

In the afternoon, you refine a cost model, brief a Program Manager on pricing strategy, and close the loop by comparing actuals from a recent build to your original estimate—tightening assumptions for the next bid.

Collaborate with Supply Chain to solicit supplier quotes, analyze cost drivers, and understand lead times.

New London, CT30+ days ago

Qualifications Required: A Bachelor's of Science Degree in Mechanical/Industrial Engineering or an Engineering Degree 1-5 years of post graduate Engineering experience Candidate must have an understanding of manufacturing processes Preferred: Master's degree in Mechanical/Industrial Engineering or an equivalent engineering degree Project management experience Lean/Six Sigma Green/Black Belt Training and/or ability to apply process improvement methodology Experience working on a shop floor in a manufacturing environment Skills Candidates must have excellent written and verbal communication skills Candidates must possess the ability to work in a cross functional team including all levels of Management Excellent organizational and interpersonal skills Ability to function independently as required Proficiency with MS Project (to develop project schedules) Advanced Microsoft Excel Skills (Pivot tables, databases, Visual Basic Macros) Respected individual with a proven track record of achievement Motivated, performance driven individual with strong leadership skills Able to combine initiative with professionalism to accomplish difficult tasks Strategic thinking and problem solving skills Proficiency with MS Office Products, Business Objects and/or Electronic Desktop Ability to walk the shipyard and climb into modules Applicants must apply for a DOD Security Clearance as a condition of employment. Team's objective is: Facilitate the identification and development of advanced submarine manufacturing technologies and processes Integrate EB organizations manufacturing technology initiatives Ensure strategic, structured and integrated approach to advancing the manufacturing capabilities at Electric Boat Candidates will be responsible to manage improvement efforts to support increased shipyard capacity as well as efforts in cost and schedule reductions for VA and CLB Class construction.

West Greenwich, RI30+ days ago

p>In addition to the base salary, Amgen offers a Total Rewards Plan, based on eligibility, comprising of health and welfare plans for staff and eligible dependents, financial plans with opportunities to save towards retirement or other goals, work/life balance, and career development opportunities that may include:

A comprehensive employee benefits package, including a Retirement and Savings Plan with generous company contributions, group medical, dental and vision coverage, life and disability insurance, and flexible spending accounts.
We are seeking a Principal Manufacturing Systems Engineer with solid leadership skills in any of Amgen Manufacturing locations in the US or Europe to join our Ops Technology Manufacturing & Engineering team to help drive productivity through the company using technology to unlock opportunities to stop, optimize processes and then automate as appropriate.

East Hartford, Connecticut22 days ago

p/>

We are seeking a highly motivated, technically talented individual, who has a true desire to work in a dynamic operations environment to support our Core Manufacturing Engineering Organization as a Manufacturing Engineer expert for coating processes such as Air Plasma Spray, HVOF, Wire Spray, Anti-gal, Sermatel, and many other aerospace coating systems. Not Required

At RTX, the world's largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world’s most complex problems.

East Hartford, CT22 days ago

p>We are seeking a highly motivated, technically talented individual, who has a true desire to work in a dynamic operations environment to support our Core Manufacturing Engineering Organization as a Manufacturing Engineer expert for coating processes such as Air Plasma Spray, HVOF, Wire Spray, Anti-gal, Sermatel, and many other aerospace coating systems.

Support Pratt & Whitney's Core Manufacturing Engineering (ME) Organization as a subject-matter expert for coating processes including Air Plasma Spray, HVOF, Wire Spray, Anti-Gal, Sermatel, and other aerospace coating technologies.

East Hartford, Connecticut7 days ago

Candidate must be able to work effectively in a multidisciplinary, collaborative team environment focused on innovation and have demonstrated both verbal and written communication skills including:

Typically requires a University Engineering Degree or equivalent experience and minimum 8 years prior relevant experience, or an advanced Degree in a related field and minimum 5 years experience. Active and existing security clearance required after day 1
At RTX, the world's largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world’s most complex problems.

East Hartford, Connecticut7 days ago

Candidate must be able to work effectively in a multidisciplinary, collaborative team environment focused on innovation and have demonstrated both verbal and written communication skills including:

Typically requires a University Engineering Degree or equivalent experience and minimum 5 years prior relevant experience, or an advanced Degree in a related field and minimum 3 years experience. Active and existing security clearance required after day 1
At RTX, the world's largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world’s most complex problems.

East Hartford, CT30+ days ago

Candidate must be able to work effectively in a multidisciplinary, collaborative team environment focused on innovation and have demonstrated both verbal and written communication skills including: Typically requires a University Engineering Degree or equivalent experience and minimum 8 years prior relevant experience, or an advanced Degree in a related field and minimum 5 years experience. The Additive Manufacturing Process and Capability Center (AMPCC) encompasses a critical mass of Additive Manufacturing (AM) process and industrialization experts, the necessary equipment, and develops the strategic collaborations needed to rapidly mature the technology and manufacturing readiness of AM.

East Hartford, CT30+ days ago

Candidate must be able to work effectively in a multidisciplinary, collaborative team environment focused on innovation and have demonstrated both verbal and written communication skills including: Typically requires a University Engineering Degree or equivalent experience and minimum 5 years prior relevant experience, or an advanced Degree in a related field and minimum 3 years experience. The Additive Manufacturing Process and Capability Center (AMPCC) encompasses a critical mass of Additive Manufacturing (AM) process and industrialization experts, the necessary equipment, and develops the strategic collaborations needed to rapidly mature the technology and manufacturing readiness of AM.

East Hartford, Connecticut30+ days ago

li>Specialized Knowledge: Exhibit expertise in areas such as manufacturability across hot structures, turbine frames, combustors, exhausts, or compressor cases, and be well-versed in aspects including manufacturing requirements, alloys, durability properties, processes, production capabilities, limitations, and MRB (Material Review Board) procedures.

This role is for a hands-on technical leader to direct a gas turbine Original Equipment Manufacturer (OEM) team driving design-to-build innovation and execution across a variety of methods from additive to related final machining.

Manchester, CT24 days ago

$78,000–$97,500 Per Year

If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market.

East Hartford, Connecticut7 days ago

Candidate must be able to work effectively in a multidisciplinary, collaborative team environment focused on innovation and have demonstrated both verbal and written communication skills including:

Typically requires a University Engineering Degree or equivalent experience and minimum 8 years prior relevant experience, or an Advanced Degree in a related field and minimum 5 years experience. Active and existing security clearance required after day 1
At RTX, the world's largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world’s most complex problems.

East Hartford, CT30+ days ago

Candidate must be able to work effectively in a multidisciplinary, collaborative team environment focused on innovation and have demonstrated both verbal and written communication skills including:

Typically requires a University Engineering Degree or equivalent experience and minimum 8 years prior relevant experience, or an Advanced Degree in a related field and minimum 5 years experience.
The Additive Manufacturing Process and Capability Center (AMPCC) encompasses a critical mass of Additive Manufacturing (AM) process and industrialization experts, the necessary equipment, and develops the strategic collaborations needed to rapidly mature the technology and manufacturing readiness of AM.

EAST HARTFORD, CT30+ days ago

Model Based-Design Manufacturing & Inspection (MB-DMI) is a company-wide initiative to augment 3D models with formats that enable automated consumption in manufacturing business processes such as: NC programming, Tool Design, Work Instruction authoring, Inspection Programming, First Article Inspection, Process Capability Analysis monitoring & reporting, Physics based modeling, Material Review Board (MRB) for discrepant material. Model Based - Definition, Manufacturing, and Inspection (MD-DMI) is one of Pratt & Whitney's Model Based Enterprise (MBE) pillar projects focused on the advancement of digital tools to create a collaborative model-based process design ecosystem to enable improvements in process development speed and effectiveness.

Middletown, CT30+ days ago

$32–$36 Per Hour

Job Title: Junior Manufacturing/Project EngineerLocations: Middletown, CT 06023Pay Rate: $32.00-36.00/hour, direct, full-time position with benefitsArea Code: 860, 203Employment Type: Direct, Full TimeOverview:A Project Engineer role is available at Belcan in Middletown, CT. Required Qualifications:* Bachelor"s degree in Engineering, Project Management, Business, or a related STEM field.* 1 or more years of experience in project engineering, manufacturing engineering, or similar (internship experience considered).*

East Hartford, CT30+ days ago

$80,000–$87,000 Per Year

Own manufacturing processes from concept through production implementation and support* Develop and optimize CNC programs for multi-axis milling, turning, and/or grinding operations* Lead tool selection and cutting strategy development to maximize efficiency and tool life* Design fixtures and work holding solutions to ensure repeatability and throughput* Work directly with production leads and machinists to resolve issues in real time* Provide hands-on shop floor support for setups, prove-outs, and process validation* Drive material review (MRB) processes and implement corrective actions* Collaborate with lab engineers, quality, and operators to meet all technical requirementsQualifications:* Minimum 5+ years of multi-axis milling, turning, and grinding process experience (aerospace experience is HIGHLY preferred).* Hands-on experience with CNC programming, fixture design, and tool selection* Lean manufacturing experience* Proven ability to work directly with production teams in a fast-paced environment* Strong ability to organize and prioritize work to meet production demands* Proficient at reading and interpreting customer drawings, specifications, and GD&T* Proficient with computer systems, CAD/CAM experienceEducation Requirements:* BS degree (Engineering discipline preferred).Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises.

East Hartford, Connecticut22 days ago

p/>

This role supports critical shop floor systems, including machine tool HMI interfaces, manufacturing tracking and prioritization tools, process data consolidation, reporting and visualization platforms, and Statistical Process Control (SPC) systems. Not Required

At RTX, the world largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world’s most complex problems.

East Hartford, CT21 days ago

p>This role supports critical shop floor systems, including machine tool HMI interfaces, manufacturing tracking and prioritization tools, process data consolidation, reporting and visualization platforms, and Statistical Process Control (SPC) systems.

Qualifications You Must Have:

An advanced degree and 5 years of prior relevant experience; OR a Bachelors degree and 8 years of prior relevant experience; OR an Associate's degree with 10 years of project management experience; OR in lieu of a degree, 12+ years of prior relevant experience.

East Hartford, CT20 days ago

$39–$49 Per Hour

li>Ensure project completion through routine tracking and management of individual project sub-tasks by regularly following up with sub-task owners to ensure timely completion of tasks.

Provide and initiate regular communication with IPTs, project engineers, and other stakeholders on risks and opportunities on potential technical and schedule issues.

RI30+ days ago

$35,000–$49,840 Per Year

To help spot these scams, remember that during our formal recruitment process, L3Harris will NOT (1) ask you for money; (2) offer to send you a check before doing any work; (3) require you to provide sensitive personal information early in the process or sensitive information about your previous employer; (4) send you emails from free commercial services (e.g.

Job Description:

With minimal guidance of the Production Supervisor, the Manufacturing Technician troubleshoots, repairs and modifies developmental and production mechanical, electronic and fiber optic components, parts, equipment and systems.

CT30+ days ago

This position requires that the Engineer work in a design, build, and sustainment environment to develop build strategies and conceptualize methods and fixtures required for fabricating and assembling submarine components, structures, ship's systems and associated modules. As demand for cutting-edge naval technology grows, General Dynamics Electric Boat is at the forefront-designing, building, and maintaining the most advanced submarines in the world.

Groton, Connecticut7 days ago

p style="margin:0px">Primary responsibilities for a manufacturing engineer include:

Identification and development of methods and tools required by the shipbuilder,
Structural analysis required to validate the design, and . This position requires that the Engineer work in a design, build, and sustainment environment to develop build strategies and conceptualize methods and fixtures required for fabricating and assembling submarine components, structures, ship’s systems and associated modules.

New London, CT25 days ago

$100,992–$131,293 Per Year

Applicants for positions that involve highly technical research, development, or similar functions requiring an advanced level of competence in basic science must meet the basic requirements in paragraph A. Because of the diversity in kind and quality of BET programs, graduates of other BET programs are required to complete at least 1 year of additional education or highly technical work experience of such nature as to provide reasonable assurance of the possession of the knowledge, skills, and abilities required for professional engineering competence. Status Candidates, Merit Promotion, Current Federal Employees, Former Federal Employees, Overseas Employees, Former Overseas Employees, CTAP, ICTAP, VEOA, 30% Disabled, Schedule A, Individuals with Disabilities, Military Spouses, Land and Base Management, Peace Corps, Americorps, Vista For definitions of common terms found in this announcement: http://dhsconnect.dhs.gov/org/comp/mgmt/dhshr/hr/Documents/JOA_Common_Definitions.pdf.

Middletown, CT28 days ago

The Tooling Engineer II is expected to demonstrate growing technical expertise and leadership, with the potential to advance to Tooling Engineer III or Senior Tooling Engineer roles by taking on more complex projects and mentoring junior engineers.

Project Management:

Manage small to medium tooling projects, including scoping, scheduling, and coordinating with vendors or internal machine shops for tool fabrication.

Willimantic, CT30+ days ago

Our Product Development teams are at the center of innovation-designing, improving, and qualifying the cable technologies that power energy grids, telecommunications networks, infrastructure, and industrial applications. With Diversity, Equity, and Inclusion (DE&I) as part of our Social Ambition 2030 and a strategic pillar of our Company culture, Prysmian is committed to the development of an organization that prioritizes talent, where people feel respected, included, and free to fully express their potential just as they are.

Hopkinton, RI30+ days ago

$20–$22.84 Per Hour
Full-time

on w2 (All Inclusive) Job Description: Responsible for performing functions associated with all manufacturing operations, including working with engineers in set-up and calibration tasks, as well as performing rework and quality testing related to the production of parts, components, subassemblies, and final assemblies. Uses sophisticated programs to collect and evaluate operating data to conduct on-line adjustments to products, instruments, or equipment.

East Hartford, Connecticut30+ days ago

Not Required

At RTX, the world largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world’s most complex problems.

Middletown, CT11 days ago

p>Department/Segment Overview:

Engineering Support to Operations (ESTO): ESTO provides dedicated support by eliminating quality notifications, escapes, works stops and enabling producibility and delivery of legacy and new parts, assemblies, modules, and engines.

Qualifications You Must Have:

A Bachelor of Science degree in Engineering and 5 years of Engineering experience, or an Advanced Degree in a related field and 3 years of Engineering experience.

East Hartford, Connecticut30+ days ago

Not Required

At RTX, the world largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world’s most complex problems.

Stand out to leading employers.

Upload your resume and let employers find you for new Manufacturing Engineer job openings. Plus, receive relevant job matches delivered straight to your inbox.

Create A Free Account

Manufacturing Engineer Jobs in Groton, CT

Principal Manufacturing Process Engineer RJS Associates

Mechanical Engineer, EPC Projects Vaco LLC

Manufacturing Engineer - Manchester Howmet Aerospace

Engineer II, Manufacturing Kaman Corp

Manufacturing Engineer Worthington Enterprises

Manufacturing Engineer Actalent Inc

Manufacturing Engineer Staffmark Group Llc

Manufacturing Engineering Structural Engineer 2nd Shift General Dynamics Corp

Manufacturing Engineer Worthington Enterprises Inc

Manufacturing Engineer Howmet Aerospace Inc

Manufacturing Engineer II Nordson Corp

Manufacturing Engineer Howmet Aerospace

Sr. Manufacturing Engineer Artech LLC

Welding & Brazing Manufacturing Engineer (Onsite) RTX

Senior Product Manufacturing Engineer (Onsite) RTX Corp

Welding & Brazing Manufacturing Engineer (Onsite) RTX Corp

Product Manufacturing Engineer (Onsite) RTX

Principal Advanced Manufacturing Research Engineer RTX

Product Manufacturing Engineer (Onsite) RTX Corp

Associate Manufacturing Engineer Actalent Inc

Principal Advanced Manufacturing Research Engineer RTX Corp

Manufacturing Cost Modeling Engineer HABCO Aerospace & Defense

Advanced Manufacturing Technology Industrial Engineer Electric Boat Corp

Principal Manufacturing Systems Engineer Amgen Inc

CORE Coatings Manufacturing Engineer (Onsite) RTX

CORE Coatings Manufacturing Engineer (Onsite) RTX Corp

Principal Additive Manufacturing Process Engineer RTX

Senior Additive Manufacturing Process Engineer RTX

Principal Additive Manufacturing Process Engineer RTX Corp

Senior Additive Manufacturing Process Engineer RTX Corp

Lead Engineer, Additive Manufacturing - Secret Clearance Quest Defense Systems & Solutions

Manufacturing Process Engineer Actalent Inc

Principal Additive Manufacturing Design Engineer RTX

Principal Additive Manufacturing Design Engineer RTX Corp

Model Based Manufacturing Applications Engineer (Onsite) RTX Corp

Junior Manufacturing & Project Engineer Belcan

Manufacturing Process Engineer Belcan

Manufacturing Applications and Controls Engineer (Onsite) RTX

Manufacturing Applications and Controls Engineer (Onsite) RTX Corp

Project Engineer - Additive Manufacturing Apollo Professional Solutions Inc

Manufacturing Technician A L3Harris Technologies Inc

Structural Engineer (Experienced/Senior, Specialist,Principal) - VPM/SSW Electric Boat Corp

Structural Engineer (Experienced/Senior, Specialist,Principal) – VPM/SSW General Dynamics Electric Boat

Electrical Engineer U.S. Department of Homeland Security

Tooling Engineer II Visium Resources, Inc.

Product Development Engineer Prysmian SpA

Manufacturing Technician LanceSoft Inc

Tooling Engineer/Designer (Onsite) RTX

Senior Design Engineer (Onsite) RTX Corp

Military Repair Tool Engineer (Onsite) RTX

Similar Job Searches