UNKNOWN

FEED

Responsibilities for project management include engineering and developing the scope of work, preparing bid documents, vendor selection, securing funding, preparing purchase requisitions, in field project management of vendors and EB personnel while maintaining the project budget, schedule and project documentation. The Groton Facilities Engineering department is seeking a seasoned electrical engineer to provide maintenance and troubleshooting support for the 110+ year old Groton shipyard and local sites, as well as designing and executing infrastructure construction projects.

Electric Boat Corp

Facilities Project Manager - Electrical Engineer

For more than 85 years, our team at Precision Fuzing and Sensors has designed, tested, and manufactured the fuzing and sensor systems that defense programs depend on - delivering mission-critical reliability from a single, vertically integrated facility in Middletown, Connecticut. Circuit design; using sound theoretical and analytics using circuit simulators (such as PSPICE or equivalent electronic analysis tools), schematic capture and circuit board layout using an integrated design tool such as Altima or ORCAD.

Kaman Corp

Test Engineer II

The real-time control logic uses MATLAB/Simulink models to emulate the propulsion system components that are not physically present at the test or to emulate real world environment conditions for testing purposes. General Description: In support of electric drive design efforts, D489 has an Emulation Lab that manages the computer systems which are used to aid testing of components of the electric drive propulsion system.

General Dynamics Corp

Experienced Emulation Engineer

Facilitate software validation plans and works with the applicable team members to draft case studies, test cases and validation reports to route to management for final approval. Works in a team environment to develop and implement best practices with emphasis on defect prevention, reduction in variation and waste, and provide for continuous improvements in meeting all customer and internal requirements.

Proterial Cable America Inc

Quality Engineer

Design and review layouts of components, calculate stack-up of detail components, and perform major cost studies consisting of new or existing details and/or marked prints and all supporting documentation, when necessary, to facilitate operations and ensure that established objectives and budgets are achieved. Design support across all phases of the design cycle, preliminary through detailed design, validation, manufacturing, and operational service and will work on the designs of any component within the Fan/LPC and/or HPC modules (i.e. Rotors, airfoils, cases, frames, kinematics, etc…).

RTX Corp

Prin Engineer, Design Engineering (Onsite)

Design and review layouts of components, calculate stack-up of detail components, and perform major cost studies consisting of new or existing details and/or marked prints and all supporting documentation, when necessary, to facilitate operations and ensure that established objectives and budgets are achieved. Design support across all phases of the design cycle, preliminary through detailed design, validation, manufacturing, and operational service and will work on the designs of any component within the HPC modules (i.e. Rotors, airfoils, cases, frames, kinematics, etc…).

GTF HPC - Principal Engineer, Design (Onsite)

Prepare and present technical and program status updates to CIPT (Component Integrated Product Team) and Pratt & Whitney leadership, clearly communicating progress, risks, and required actions. Compression Systems Engineering is responsible for the design, development, and in service support of all fans low-pressure and high-pressure compressors for commercial and military engine models.

Senior Composites Engineer (Onsite)

In this role, you will support CIMA (Composites, Impact, Manufacturing and Analysis) with technology, design development, definition, production, and aftermarket phases for composite fan components on a mix of operational military engines and advanced engine development programs. Functioning as a design/structures engineer for composite components and working on an Integrated Product Team (IPT) and participating in projects aimed at crafting and implementing designs that meet advanced engine-specific requirements.

Principal Composites Engineer (Onsite)

At RTX, the world's largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world's most complex problems. Compression Systems Engineering is responsible for the design, development, and in service support of all fans low-pressure and high-pressure compressors for commercial and military engine models.

CSE GTF HPC Structures Senior Engineer (Onsite)

FULL_TIME

Drive completion of actions supporting construction, ensure readiness for hardware delivery, reassembly, major move evolutions, component land and key events, including coordination and execution of multidisciplinary engineering evaluations to support construction needs. D489 engineers are responsible for the assembly, integration, outfitting, test, and problem resolution of delivered TG sets for the state-of-the-art electric drive propulsion system on COLUMBIA Class submarine.

General Dynamics Electric Boat

Turbine Generator (TG) Set Engineer

[AW]-iCims

In this role, you will manage and resolve technical issues for the PW2000/PW4000/GP7000 engines to ensure engine safety, maintain world-class operational metrics (Delays and Cancellation rate, In-Flight-Shut-Down rate, Unscheduled Engine Removal rate, etc.), contribute to acceptable shop Turn-Around-Time, and reduce the maintenance burden for our customers. Initiate development of technical data, including Engineering Authorizations (EA), Special Instructions, and other maintenance documentation supporting on-wing and engine shop activities, including Aircraft Maintenance Manuals (AMM), Engine Manuals (EM), Clean, Inspect and Repair (CIR), and Maintenance Planning Guides (MPG).

Senior Field Service Engineer (Onsite)

Development Operations (DO) Test Systems Engineering (TSE) is seeking a highly motivated Project Engineer to manage Special Test Equipment (STE) design projects in support of validation and production testing of jet engines and engine components. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

Principal Engineer, Project Engineering (Onsite)

Background in structural analysis and 8+ years of experience, with demonstrated problem solving skills using FEM for stress/deflection, vibration, and performing LCF, HCF, Fracture Mechanics or Kinematics analyses. At RTX, the world's largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world's most complex problems.

CSE Structures Principal Engineer (Onsite)

Department/Segment Overview: Mechanical Systems, Externals, & Nacelles (MSEN): The Mechanical Systems, Externals, and Nacelles Engineering organization is responsible for the design, development, and in-service support of power transmission systems, bearing compartment and rotor support design and analysis, oil and thermal management systems, engine externals packaging and architecture, as well as nacelles for commercial and military engine models. Technical disciplines include Project Engineering, Mechanical Design, Structural Analysis, Product Definition, System Modeling, Mechanical Design analysis for bearings, gears, and seals, and fluid-thermal modeling of associated components and systems.

Senior Structures Engineer (Onsite)

Department/Segment Overview: Mechanical Systems, Externals, & Nacelles (MSEN): The MSEN Engineering organization is responsible for the design, development, and in-service support of power transmission systems, bearing compartment and rotor support design and analysis, oil and thermal management systems, engine externals packaging and architecture, as well as nacelles for commercial and military engine models. Relevant experience within the aerospace, aviation, manufacturing, military, or logistics industries leading complex engineering projects or cross-functional technical teams managing technical risks, engineering execution, or product development activities.

Senior Project Engineer (Onsite)

CDS is responsible for all aspects of Pratt & Whitney engine control and diagnostic system development and support, including requirements analysis & definition, system & software architecture, algorithm design, product software design, verification & validation and engine and flight test support. As a member of a dynamic engineering organization, this position offers the candidate an excellent opportunity to apply multidisciplinary engineering and leadership skills in the development and support of complex engine control and diagnostic systems and software.

Senior Engineer - Agile Software Development - CDS / Engine System Software P3 (Onsite)

Experience working with one or more of the following aerospace or commercial equivalent preventative tools - Statistical Process Control (SPC), Failure Modes and Effects Analysis (FMEA), Quality Function Deployment (QFD), Production Part Approval Process (PPAP),8D, Lean Manufacturing, Control Plans, other process improvement tools. What You Will Do: The selected Supplier Quality Engineer will provide support to the Airfoils and Composites Product Center relative to improvement of suppliers' Quality as well as providing Quality interface, expertise and support to Suppliers.

Supplier Quality Engineer (Onsite)

Overview: Shipyard Test Organization (D272) is seeking highly motivated candidates for our growing backshift to lead and instruct STO-Electrical Testers in the safe conduct of Virginia Class Steam and Electric Plant systems, Weapons, and Hull, Mechanical and Auxiliary systems which may include testing on Sea Trials. Physical Qualifications: Climbing, Color Vision, Crawling, Kneeling, Light Lifting, Medium Lifting, Pulling, Pushing, Reaching, Stooping, Twisting Environmental Attributes: Cold, Dry, Dusty, Hot, Inside, Noise, Oily, Outside, Wet

Human Resources Jobs in Madera, CA

Facilities Project Manager - Electrical Engineer Electric Boat Corp

Test Engineer II Kaman Corp

Experienced Emulation Engineer General Dynamics Corp

Quality Engineer Proterial Cable America Inc

Prin Engineer, Design Engineering (Onsite) RTX Corp

GTF HPC - Principal Engineer, Design (Onsite) RTX Corp

Senior Composites Engineer (Onsite) RTX Corp

Principal Composites Engineer (Onsite) RTX Corp

CSE GTF HPC Structures Senior Engineer (Onsite) RTX Corp

Turbine Generator (TG) Set Engineer General Dynamics Electric Boat

Turbine Generator (TG) Set Engineer General Dynamics Corp

Senior Field Service Engineer (Onsite) RTX Corp

Turbine Generator (TG) Set Engineer Electric Boat Corp

Principal Engineer, Project Engineering (Onsite) RTX Corp

CSE Structures Principal Engineer (Onsite) RTX Corp

Senior Structures Engineer (Onsite) RTX Corp

Senior Project Engineer (Onsite) RTX Corp

Senior Engineer - Agile Software Development - CDS / Engine System Software P3 (Onsite) RTX Corp

Supplier Quality Engineer (Onsite) RTX Corp

Electrical Test Engineer - NNTL - Virginia Class 2nd & 3rd shift General Dynamics Electric Boat

Similar Job Searches

Stand out to leading employers.