Sr. Systems Engineer Sierra Nevada CorpSr. Systems EngineerEnglewood, CO$143,487.14–$197,294.82 / yearThe ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems. Its end-to-end Command, Control, Computers, Communications and Intelligence, Surveillance & Reconnaissance (C4ISR) capabilities encompass design, integration, test, certification, ground/flight training and complete logistics support.
Lead Water / Wastewater Engineer-SW Region WSP Global IncLead Water / Wastewater Engineer-SW RegionDenver, CO$111,200–$198,220 / yearYour Impact: Provide engineering services in support of planning, studies, analysis, and design of water treatment and distribution systems, as well as wastewater collection and treatment systems, which may include pump/lift stations, wells, chemical feed systems, and storage reservoirs. WSP USA is providing the compensation range that the company in good faith believes it might pay and/or offer for this position within the state of Colorado, based on the successful applicant's education, experience, knowledge, skills, and abilities in addition to internal equity and specific geographic location.
Principal Packaging Systems Engineer Leprino Foods CoPrincipal Packaging Systems EngineerDenver, CO$147,000–$170,000 / yearWithin our Corporate Engineering team located in Denver - Leprino is seeking a Principal Packaging Systems Engineer to lead the design and execution of large, complex high-speed packaging capital projects across our cheese and nutrition manufacturing network. This role carries full accountability for system-level packaging design, technical direction, and execution from concept through commissioning, working directly with plant teams, equipment partners, and general contractors to bring high-speed packaging systems online.
Principal DeltaV Automation Engineer Matrix Technologies, Inc.Principal DeltaV Automation EngineerWestminster, CORemote$150,000–$180,000 / yearUnlike many traditional engineering roles, this position provides the opportunity to influence technical strategy, build a growing DeltaV practice, and develop the next generation of automation engineers while remaining actively involved in challenging client projects. While performing the duties of this job, the employee is occasionally required to stand; walk; sit; stoop, kneel, crouch; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk, and hear.
Civil Engineer Matrix Technologies, Inc.Civil EngineerWestminster, CORemote$81,000–$115,000 / yearLead designs for site grading, site layout, stormwater management, storm sewers, sanitary sewers, water/firewater piping, pavement, parking lots, private roads/drives, erosion and sediment control, railroad spurs and general site development for industrial and manufacturing facilities. Matrix is seeking a self-driven mid to senior-level experienced Civil Engineer to join our team in one of our 8 office locations (Maumee, OH; Cincinnati, OH; Westminster, CO; Indianapolis, IN; Peachtree City, GA; Overland Park, KS; Edina, MN; Raleigh, NC).
NewSystems Engineer II MedtronicSystems Engineer IILafayette, ColoradoThe following benefits and additional compensation are available to those regular employees who work 20+ hours per week: Health, Dental and vision insurance, Health Savings Account, Healthcare Flexible Spending Account, Life insurance, Long-term disability leave, Dependent daycare spending account, Tuition assistance/reimbursement, and Simple Steps (global well-being program). As a Systems Engineer II within the CST Platforms and Solutions organization you will utilize your technical expertise in solving complex problems and in designing solutions using computer-assisted and robotic-assisted surgery technology to improve patient outcomes and surgical efficiency.
Structural Engineer - Senior Level - Hydropower Focus (Hybrid/Remote) Barr Engineering CoStructural Engineer - Senior Level - Hydropower Focus (Hybrid/Remote)Denver, CORemote$115,000–$140,000 / yearIn this hybrid/remote role, you will support the Engineering and Design structural group as part of multidisciplinary project teams providing structural engineering and related technical expertise primarily for dam structures, hydropower facilities, and flood control structures, such as spillways, outlet works, decant systems, overflow weirs, culverts, pump/lift stations, and other miscellaneous hydraulic structures. At Barr, we also believe that learning doesn't stop when you get your degree, which is why we provide coaching, mentoring, and support for ongoing educational opportunities to foster professional development at every stage of your career.
Principal Engineer-Software EchoStar CorpPrincipal Engineer-SoftwareEnglewood, CORequirements: Bachelor's degree (or foreign equivalent) in Computer Engineering, Mechanical Engineering, or a closely related field and six (6) years of progressive post-baccalaureate experience in job offered or as a Test Engineer, Solutions Architect, Test Analyst, and/or Senior Associate-Projects, or similar role. Perform requirements analysis around Video/OTT, API based applications to design and develop Load or Test automation Strategies, identify tools that can automate Functional, Regression and Performance test/analysis activities and support our critical business initiatives.
Senior Commissioning Engineer WB Engineers+ConsultantsSenior Commissioning EngineerDenver, COThis position is responsible for overseeing all aspects of commissioning activities, from initial screenings and operational studies to hands-on operation assistance, troubleshooting, and client training. The Senior Commissioning Engineer plays a pivotal role in ensuring the seamless pre-commissioning, commissioning, and start-up of building systems.
Principal Project Engineer CesiumAstroPrincipal Project EngineerWestminster, CO$158,000–$189,000 / yearSuccessful candidates will require, as a minimum: A Bachelor of Science (BS) or Master of Science (MS) degree in a relevant engineering field (Electrical Engineering, Computer Engineering, Computer Science, Mechanical Engineering, Aerospace Engineering, Systems Engineering) from an accredited university or institution. Please Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State.
Senior Spacecraft Systems Engineer - Optical Comms CesiumAstroSenior Spacecraft Systems Engineer - Optical CommsWestminster, CO$133,908–$160,991 / yearBachelor's degree in Aerospace Engineering, Systems Engineering, Electrical Engineering, Mechanical Engineering, Computer Engineering, Physics, or a related technical discipline with typically 5-8 years of relevant experience; Master's degree in a related technical discipline with typically 3-6 years of relevant experience; or PhD in a related technical discipline with typically 0-3 years of relevant experience. Working within a multidisciplinary engineering environment, the Senior Systems Engineer collaborates with software, hardware, mechanical, electrical, manufacturing, integration and test, mission operations, and program management teams to ensure systems meet technical, operational, cost, and schedule objectives.
Field Service Engineer – Founding Team ARES ScientificField Service Engineer – Founding TeamCENTENNIAL, CO$4,000–$8,000Full timeYou’ll work alongside a senior Service Technician who has been with the organization for over 15 years as well as a Director of CX who has been leading technical installations for the same amount of time , bringing deep experience with laboratory environments, equipment logistics, and customer relationships. Together, you’ll combine institutional knowledge with new engineering capabilities to help build a modern service organization that supports leading research and clinical facilities around the world.
Senior Simulation Engineer Impulse SpaceSenior Simulation EngineerLouisville, CO$150,000–$200,000 / yearThis position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. As a Simulation Engineer , you will be responsible for developing and maintaining high-fidelity simulations of space vehicle dynamics, sensors, actuators, and propulsion systems, with the potential to expand into other subsystems.
NewSpacecraft Operations Engineer I/II Rocket Lab USASpacecraft Operations Engineer I/IILittleton, CO$82,000–$118,000 / yearTo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope.
NewPrincipal Radio Systems Engineer LeoLabsPrincipal Radio Systems EngineerDenver, ColoradoThis is a hands-on technical leadership role for an experienced engineer who enjoys solving difficult problems, mentoring other engineers, working in dynamic teams, interfacing with external partners and customers, and building reliable hardware that performs in demanding environments. As orbital activity accelerates and threats grow more complex, LeoLabs is a trusted partner for Space Domain Awareness, Space Traffic Management, and Satellite Operations for top-tier space operators and allied defense organizations.
Spacecraft Operations Engineer I/Ii Rocket Lab USASpacecraft Operations Engineer I/IiLittleton, CO$82,000–$118,000 / yearImportant information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope.
FEA Stress Analysis Engineer SI Solutions, LLCFEA Stress Analysis EngineerDenver, CO$100,560–$168,240 / yearHiring decisions for such positions must comply with these regulations and may result in SIA limiting its consideration of foreign nationals who are citizens of countries that are not on the DOE’s Generally Authorized Destinations List: https://www.ecfr.gov/current/title-10/chapter-III/part-810/appendix-Appendix%20A%20to%20Part%20810 . Export Control Notice: Certain positions at SIA may require access to information and technology which is subject to Export Administration Regulations 15 CFR 730-774, including those of the US Department of Energy (DOE) in 10 CFR 810 and Nuclear Regulatory Commission (NRC) 10 CFR Part 110.
Product Design Engineer – Digital Fabrication Vanlife CustomsProduct Design Engineer – Digital FabricationArvada, COFull timeWe are looking for an experienced design engineer who can turn loosely defined ideas and practical requirements into thoughtful, install-ready solutions, particularly for our custom cabinetry and wall/ceiling/floor panel systems. Your work will include designing cabinetry systems, mounting structures, electrical enclosures, modular storage systems, vehicle interfaces, fixtures, production tooling, and new product concepts.
Ground Operations Engineer II Sierra SpaceGround Operations Engineer IILouisville, CO$90,707–$124,744.25 / yearSupport spacecraft processing from end of production through integrated test into launch and landing including: MES authoring and ownership, procedure validation, payload integration, propellant loading operations, electrical and mechanical checkouts, configuration management, flight hardware handling and logistics coordination. Any unsolicited resumes submitted to our website or to Sierra Space team members not through our approved vendor list or Talent Acquisition will be considered property of Sierra Space, and we will not be obligated to pay any referral fees.
Building Design Manager Kiewit CorpBuilding Design ManagerDenver, CO$132,000–$138,000 / yearMinimum of 10+ years of relevant design/PM experience, performing functions as detailed above, with at least 7 years or more in building design and 3 years or more of relevant building project management experience leading a team (or a combination of those years in design plus management), where you have been the central point of contact for coordination of engineering, construction, and vendors. Our rapidly growing Industrial and Water Engineering Group, which includes mechanical, process, electrical, controls, structural and architectural disciplines, is a multi-faceted and leading-edge division of Kiewit with best-in-class technical expertise focused on EPC and design-build delivery.
Engineer 3 - Injection Molding Terumo BCT IncEngineer 3 - Injection MoldingLakewood, CO$105,800–$132,300 / yearStrong interactive skills in general communication, cross-functional participation and influence, mentoring and acceptance of guidance, technical leadership, project management, coordination with cross-functional team members, team behavior, and support for subordinates, junior engineers, technicians, and management. Hands-on injection molding set-up and process development experience and knowledge of mold design and construction to a level of being able to carry out a mold design review and understand basic tooling functionality and methodology of manufacture (machining, EDM, polishing, texturing).
Systems Engineer III ArcfieldSystems Engineer IIILouisville, ColoradoFull timeThere are differentiating factors that can impact a final salary/hourly rate, including, but not limited to, Contract Wage Determination, relevant work experience, skills and competencies that align to the specified role, geographic location (For Remote Opportunities), education and certifications as well as Federal Government Contract Labor categories. Bachelor’s degree or higher in a relevant engineering field plus 5-7 years, MS plus 3-5 years, or PhD plus 0-2 year of professional experience in systems engineering for high-reliability space & aerospace applications.
Senior EO/IR Optical Engineer - Level V ArcfieldSenior EO/IR Optical Engineer - Level VLouisville, ColoradoFull timeThere are differentiating factors that can impact a final salary/hourly rate, including, but not limited to, Contract Wage Determination, relevant work experience, skills and competencies that align to the specified role, geographic location (For Remote Opportunities), education and certifications as well as Federal Government Contract Labor categories. Required: Bachelor’s degree or higher in a computer engineering or computer science field plus 12-15 years, MS plus 10-13 years, or PhD plus 10+ years of professional experience in software engineering for high-reliability space and aerospace applications.
Staff Spacecraft Systems Engineer - Electronics CesiumAstroStaff Spacecraft Systems Engineer - ElectronicsWestminster, CO$158,012–$189,969 / yearThis role collaborates closely with software, electrical, mechanical, manufacturing, integration and test, mission operations, and program management teams to ensure systems meet technical, performance, schedule, and customer requirements while supporting sound engineering practices and technical decision-making. Please Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State.
Staff Engineer / Scientist 1 Applied Research Associates, IncStaff Engineer / Scientist 1Littleton, COFull timeWe are currently seeking excellent candidates for a growing list of projects involving optics, critical materials, materials characterization, remote sensing, laser/material interactions, and sensor development in support of national security applications. ARA’s Littleton, Colorado facility supports research in the following areas: Acoustics – Human hearing/injury, ultrasound, signal processing, Physics – Sensors development, blast-structure interaction, modeling and simulation.
Controls Engineer II Forge NanoControls Engineer IIThornton, CO$95,000–$105,000The Controls Engineer II may be responsible for tasks and skills such as (non-exhaustive): • Developing and debugging PLC logic using IEC 61131-3 approved languages, primarily rooted in Beckhoff TwinCAT structured text programming. The employee will be required to wear all appropriate safety equipment including but not limited to eye protection, gloves, steel toe shoes, lab coat, and in the plant, a hard hat.
NewPrincipal Design & Firmware Engineer QorvoPrincipal Design & Firmware EngineerDenver, CO$148,100–$192,500 / yearQorvo's Antenna Technologies team is seeking a Principal Firmware & Electrical Design Engineer to design, build, test, and maintain embedded controller hardware and firmware for phased array reference designs and array products, with support for power supply and digital control circuitry. Qorvo serves multiple high-growth segments of large global markets, including consumer electronics, smart home/IoT, automotive, EVs, battery-powered appliances, network infrastructure, healthcare and aerospace/defense.
ASIC/FPGA Design Engineer IV, TS/SCI Clearance Lockheed Martin CorpASIC/FPGA Design Engineer IV, TS/SCI ClearanceLouisville, CO$123,500–$217,695 / yearJoin Our Team as an ASIC & FPGA Engineer where you will support over 50 different programs and research and development (R&D) efforts, affecting technology across military space, civil space, commercial space, missiles, missile defense platforms, satellite surveillance platforms, deep space exploration, and manned flight missions. • Proactively monitor and manage team member workloads, tracking progress against assigned tasks and labor capacity, while collaborating with project engineers and managers as needed to ensure clear communication regarding the teams execution.
Contractor - Electrical Design Engineer (will consider all senior levels) Redwire CorpContractor - Electrical Design Engineer (will consider all senior levels)Littleton, CO$55–$95 / hourExperience with analog circuit design, including isolated and non-isolated switched-mode power supply (SMPS) using discrete components; common and differential mode power filtering; active filter and amplifier design; high-side FET drives with monolithic or discrete solutions; and GaN FET experience. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
NewElectrical Design Engineer (will consider all senior levels) Redwire CorpElectrical Design Engineer (will consider all senior levels)Littleton, COExperience with analog circuit design, including isolated and non-isolated switched-mode power supply (SMPS) using discrete components; common and differential mode power filtering; active filter and amplifier design; high-side FET drives with monolithic or discrete solutions; and GaN FET experience. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
GNC Engineer, ADCS (Vehicle) Rendezvous RoboticsGNC Engineer, ADCS (Vehicle)Golden, Colorado$95,000–$140,000 / yearExperience standing up a subsystem from a blank sheet — requirements, concept of operations, and architecture — and general familiarity with the disciplines necessary for spacecraft flight (structures, power, propulsion, avionics, flight software, dynamics, and mission operations). Rendezvous Robotics is solving this problem with electromagnetic self-assembling tiles: modular spacecraft components that rendezvous, dock, and latch to assemble bigger and more powerful spacecraft than anything that can be folded to fit into a rocket.
Controls Engineer - Denver Applied Control Engineering, Inc.Controls Engineer - DenverWheat Ridge, COPREFERRED EDUCATION Bachelors (or higher) degree in Chemical Engineering, Electrical Engineering, Mechanical Engineering, Robotics Engineering, Bioengineering, Industrial Engineering, Computer Engineering or Computer Science. Applied Control Engineering, Inc. (ACE) provides automation solutions to a diverse set of industries, including chemicals, pharmaceuticals, industrial gases, discrete manufactured products, and more.
Product Development Engineer Judge GroupProduct Development EngineerDenver, CO$95,000–$105,000 / yearBy providing your phone number, you consent to: (1) receive automated text messages and calls from the Judge Group, Inc. and its affiliates (collectively "Judge") to such phone number regarding job opportunities, your job application, and for other related purposes. This role focuses on optimizing product performance, cost, and manufacturability while collaborating with global cross-functional teams to support product line success.
Cable and Harness ElectroMechanical Engineer II Lockheed Martin CorpCable and Harness ElectroMechanical Engineer IIEnglewood, CO$73,400–$129,260 / yearThe Fleet Ballistic Missile Avionics team is seeking an experienced Electromechanical Engineer who will work closely with senior engineers to develop preliminary 3D concept models of space flight avionics Cable and Harnessing and ultimately advance them for flight use. Pay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $73,400 - $129,260.
ElectroMechanical Packaging Engineer III Lockheed Martin CorpElectroMechanical Packaging Engineer IIILittleton, CO$89,300–$157,550 / yearPay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $89,300 - $157,550. Location: This position does not support teleworking;the selected candidate will be located near our Lockheed Martin Space facility in: Littleton or Englewood CO and be expected to work a flexible 9x80 schedule in the office full-time.
Senior Hardware & Production Engineer PMAT Inc.Senior Hardware & Production EngineerCentennial, COResponsibilities: Lead transition of TEN hardware from development to the next generation, small form factor Ensure compliance with Design for Manufacturability (DFM), Design for Test (DFT), and Design for Reliability (DFR) principles for ruggedized edge systems Support design and integration of high-performance compute hardware (CPU/GPU systems, storage, networking, sensor interfaces) Develop production processes, test procedures, and acceptance criteria for deployed systems Troubleshoot hardware and system-level issues across lab, production, and fielded environments Perform root cause corrective action (RCCA) on failures identified during test or deployment Support environmental qualification (thermal, vibration, shock, EMI/EMC) for tactical deployments Manage configuration control, technical data packages (TDPs), and engineering change orders (ECOs) Collaborate with software, network, and ISR system teams to ensure hardware compatibility and performance Interface with DoD stakeholders, program offices, and operational users to support deployment readiness. Required Skills and Experience: 6-10+ years of experience in hardware engineering, production engineering, or systems integration Experience with ruggedized computing systems or deployed tactical hardware Strong understanding of embedded systems, networking hardware, and high-performance compute platforms Experience with electronics manufacturing (PCB assembly, system integration, box build) Hands-on troubleshooting experience with lab and field equipment Demonstrated ability to lead cross-functional engineering and production efforts Hardware-to-production transition for tactical systems Ruggedized system design & integration Production troubleshooting & RCCA Systems-level thinking (compute, network, sensors) Cross-functional leadership Data-driven manufacturing & reliability improvement.
Systems Engineer, Mid-Career Lockheed Martin CorpSystems Engineer, Mid-CareerLittleton, CO$109,200–$192,510 / yearDuties and responsibilities may include, but are limited to the following: Lead and coordinate with a complex, multidisciplinary team of engineers, which includes but is not limited to representation from Aero, Thermal, Separation Dynamics, Loads, Stress, Trajectory Design, NG&C, FSW, Mechanical Design, Mechanical Integration, Initiation, Instrumentation/Telemetry, TPS, and Ground Test. The Next Generation Interceptor (NGI) team is in search of a Mid-Career Systems Engineer to be part of the multi-disciplined engineering team responsible for designing and certifying missile defense technology that could forever change our ability to deter and respond to conflict.
Flight Sciences Multi-Body Dynamics Engineer (Level 4) Lockheed Martin CorpFlight Sciences Multi-Body Dynamics Engineer (Level 4)Littleton, CO$104,500–$184,115 / yearEvery day our teams design and deliver satellites and spacecraft that: • Provide early warning for severe weather and global threats • Connect troops and critical missions across the globe • Enable GPS navigation for billions of people • Support exploration and scientific discovery beyond our planet. Pay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $104,500 - $184,115.
Flight Sciences Multi-body Dynamics Engineer (Level 3) Lockheed Martin CorpFlight Sciences Multi-body Dynamics Engineer (Level 3)Littleton, CO$85,500–$150,765 / yearPay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $85,500 - $150,765. • Communicate complex technical findings with clarity and confidence, delivering high-quality documentation and presenting to internal teams, customers, and program leadership at key design reviews and technical forums.
Thermal Engineer Staff (Level 4) Lockheed Martin CorpThermal Engineer Staff (Level 4)Littleton, CO$104,500–$184,115 / yearPay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $104,500 - $184,115. As a senior member of the thermal engineering team, you will lead and execute high-fidelity thermal analyses across missile components, subsystems, and fully integrated systems - including ground support equipment - throughout the entire lifecycle.
Systems Engineer, Senior - Reentry/Telemetry Lockheed Martin CorpSystems Engineer, Senior - Reentry/TelemetryEnglewood, CO$89,300–$157,550 / yearPay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $89,300 - $157,550. Conduct Systems Engineering design reviews, document generation, and coordination with multiple disciplines to achieve project milestones including design (mechanical, electrical, RF & Software), flight sciences.
Experienced Stress Analysis Engineer Re:Build Manufacturing, LLCExperienced Stress Analysis EngineerEnglewood, CO$95,000–$230,000 / yearOur acquired businesses are grounded in build-to-print and by-the-hour engineering and design services, and we're leveraging their combined expertise to migrate to increasingly sophisticated program development and production, as well as the generation of our own products. Our unique set of capabilities lend themselves to highly complex systems and products, and we offer customers a range of services including product and systems design, automation, fabrication, assembly, and large volume contract manufacturing.
Research and Development Machine and Controls Engineer Re:Build Manufacturing, LLCResearch and Development Machine and Controls EngineerCommerce City, CO$90,000–$135,000 / yearOur unique set of capabilities lend themselves to highly complex systems and products, and we offer customers a range of services including product and systems design, automation, fabrication, assembly, and large volume contract manufacturing. Our acquired businesses are grounded in build-to-print and by-the-hour engineering and design services, and we're leveraging their combined expertise to migrate to increasingly sophisticated program development and production, as well as the generation of our own products.
Research and Development Composites Molding Engineer Re:Build Manufacturing, LLCResearch and Development Composites Molding EngineerCommerce City, CO$91,000–$137,000 / yearRe:Build Manufacturing is seeking a highly skilled R&D Composites Molding Engineer to lead research and development of advanced thermoplastic molding processes, tooling technologies, and prototype equipment for our manufacturing operations. This hands-on role emphasizes developing new molding processes, designing prototype tooling, and testing emerging technologies while working directly with molds, molding equipment, and R&D teams.
Modular Data Center Systems Engineer – Spark CrusoeModular Data Center Systems Engineer – SparkDenver, ColoradoWe're looking for problem-solving, opportunity-finding teammates with a sense of urgency, who believe in the scale of our ambition and thrive on a path not fully paved — people who want to grow their careers alongside a team of experts across energy, manufacturing, data center construction, and cloud services. Unified Design Packages: Coordinate and maintain comprehensive technical documentation (i.e. LOD 400) by aggregating inputs from various engineering disciplines, ensuring a cohesive "data center in a box" blueprint for manufacturing partners.
Senior Applications Engineer CrusoeSenior Applications EngineerArvada, ColoradoWe're looking for problem-solving, opportunity-finding teammates with a sense of urgency, who believe in the scale of our ambition and thrive on a path not fully paved — people who want to grow their careers alongside a team of experts across energy, manufacturing, data center construction, and cloud services. This role is focused on the initial project phase, primarily defining the scope of work, generating preliminary electrical and mechanical designs, and supporting the estimating process for custom power, control, and modular building products .
NewSr Process Engineer ExoTerra Resource, LLCSr Process EngineerLittleton, CO$110,000–$135,000To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. . We are seeking a highly skilled and results-driven Process Engineer to lead the development, industrialization, and ramp-up of manufacturing processes for a new high-rate aerospace production facility.
Packaging Engineer ExoTerra Resource, LLCPackaging EngineerLittleton, CO$105,000–$125,000 / yearTo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. You will develop packaging solutions that meet stringent aerospace industry requirements, reduce waste, improve cost efficiency, and ensure the safe movement of precision‑engineered hardware.
Staff Process Engineer ExoTerra Resource, LLCStaff Process EngineerLittleton, CO$130,000–$150,000To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. We are seeking a highly skilled and results-driven Staff Process Engineer to lead the development, industrialization, and ramp-up of manufacturing processes for a new high-rate aerospace production facility.
R&D Engineer Intern Canopy A&DR&D Engineer InternLittleton, ColoradoAs an intern, you will work closely with experienced engineers to develop and test next-generation materials and hardware systems designed for extreme environments — including re-entry vehicles, hypersonic platforms, and high-temperature aerospace and defense systems. You will be embedded in real development programs, working alongside engineers, technicians, and manufacturing teams to help build and test hardware that must survive some of the harshest environments encountered in aerospace.