End of Line (EOL) Quality Engineer - Battery Cell Development Center General Motors CoEnd of Line (EOL) Quality Engineer - Battery Cell Development CenterWarren, MIThe role serves as the independent quality voice for formation and EOL operations, partnering with process engineering, manufacturing, and cell design teams to prevent defects, reduce escape risk, and drive robust corrective actions. Update and maintain control plans for critical quality characteristics in formation and end of line testing such as charge/discharge profiles, gas evolution, capacity, impedance, leakage, and voltage decay behaviors in the finished cell.
Research Engineer- Fuel Cell Stack Modeling Ford Motor CoResearch Engineer- Fuel Cell Stack ModelingDearborn, MI$99,100–$166,200 / yearEngineering Analysis: Conduct model-based engineering analysis to mitigate stack stress factors and improve lifetime durability, supporting key design decisions for fuel cell stacks, systems, and controls. Your work will directly influence system-level design decisions, helping to mitigate stack stress factors, extend fuel cell lifetimes, and deliver scalable, production-ready green energy solutions.
Battery Management/Modeling Research Engineer Ford Motor CoBattery Management/Modeling Research EngineerDearborn, MI$6–$8 / hourThis position involves battery modeling research to support the development of current and future hybrid, plug-in hybrid, and battery electric vehicles within Ford Research and Advanced Engineering. Identify and prescribe test methods, including novel measurements beyond traditional battery cycling, that can deliver data needed to calibrate or validate multi-physics battery models.
Quality Engineer - Aerospace Materials PPG Industries IncQuality Engineer - Aerospace MaterialsShelby, MIThrough leadership in innovation, sustainability and color, PPG helps customers in industrial, transportation, consumer products, and construction markets and aftermarkets to enhance more surfaces in more ways than does any other company. This role is a part of the Shelby Quality Organization and provides subject matter expertise in quality sciences to drive compliance and continuous improvement across the product lifecycle.
NewGPS Supplier Quality Engineer General Motors CoGPS Supplier Quality EngineerWarren, MIThis role serves as the technical liaison between GM Purchasing, Product Engineering, Manufacturing, Plant Quality, and the external supply base, ensuring robust Advanced Product Quality Planning (APQP), flawless launches, and stable current production performance across global GPS programs. Lead structured problem solving (8D, 5-Why, Red X, DMAIC) for supplier-caused issues impacting plants, launches, warranty, JD Power, or safety; ensure robust containment, verified root cause, and systemic corrective actions, including read-across.
Design Release Engineer General Motors CoDesign Release EngineerWarren, MIRequires three (3) years of experience with the following: Automotive ADHESIVES development or release; Product Engineering tools and processes; Reading schematic diagrams; Cross-functional experience in Calibration, Manufacturing, Validation, and VDDV; and Chemical composition knowledge. REQUIREMENTS: Bachelor's degree in Electrical Engineering, Mechanical Engineering, Chemical Engineering, or related field of study and Five (5) years of experience as a Design Release Engineer, Product Engineer, or related occupation.
Senior Mechanical Engineer - Kiewit Power Engineering Kiewit CorpSenior Mechanical Engineer - Kiewit Power EngineeringDetroit, MIPrepare mechanical engineering designs, drawings, As-Builts, systems specifications, equipment lists, general arrangements, aux power demands, and process flow diagrams (PFDs) and procurement packages for equipment/components, technical bid evaluation from vendors, and vendor selection. Our staff leads the power markets engineering process and collaborates with Kiewit's construction teams to approach construction-driven engineering with a focus on safe, cost-effective, and innovative designs that achieve client expectations and further Kiewit's legacy of excellence.
NewLead Application Engineer, Bonding and Gasketing Henkel AG & Co KGaALead Application Engineer, Bonding and GasketingMadison Heights, MI$85,000–$120,000 / yearUnited States, Rocky Hill, CT, United States, Elgin, IL, United States, Madison Heights, MI, United States, Bridgewater, NJ, United States, Mentor, OH, Adhesive Technologies, Engineering. Henkel holds leading positions in both industrial and consumer businesses: Our portfolio includes well-known hair care products, laundry detergents, fabric softeners as well as adhesives, sealants, and functional coatings.
Lab Engineer Norsk Hydro ASALab EngineerTroy, MI$82,640–$112,396 / yearThe Lab Engineer will complete chemical analysis and material qualification testing, complete testing required for root cause analysis of quality claims and at times travel for plant support. Since 1905, Hydro has turned natural resources into valuable products for people and businesses with focus on a safe and good workplace for our 30,000 employees in more than 140 locations.
Diesel Emissions Systems Engineer Ford Motor CoDiesel Emissions Systems EngineerDearborn, MI$86,600–$144,900 / yearBachelor's degree in Mechanical Engineering, Chemical Engineering, Electrical Engineering, or a related Systems Engineering field. Coordinate subsystems and lead technical trade-off discussions across different engineering domains to achieve an optimized system-level solution.
Senior Engineer - EV Battery System Design Hyundai America Technical Center, Inc.Senior Engineer - EV Battery System DesignSuperior Township, MI5-10 years of experience in xEV high voltage battery or system development in a production-intent environment, ideal experience could include any of the following: Experience in designing and improving optimal battery cooling systems/structures. Advanced Engineering Lab (AEL) is an engineering group at HATCI that focuses on advanced technology research and development applied to current/future production vehicles and future mobility.
Distinguished Engineer, Materials SME Harman International Industries IncDistinguished Engineer, Materials SMENovi, MIThis role applies strong analytical and problem-solving skills to identify root causes of material-related failures, optimize material composition and processing, and ensure performance, durability, and cost targets are met. This Materials Expert position will work in the global Car Audio speaker engineering team and will be responsible for the selection, specification, development, and validation of materials used in automotive loudspeakers and components.
Engineer - Senior Licensed Professional- 067130 Wayne County (MI)Engineer - Senior Licensed Professional- 067130Detroit, MITasks include technical review of shop drawings; independent assessment of the recommended improvements and inspection of the quality and progress of construction; assistance in the coordination of treatment operations and construction efforts; and participation in the testing, start-up and training aspects of construction projects. Leads the ESD asset management program, including establishing and maintaining an accurate equipment and inventory database that provides detail on equipment conditions and performs ranking functions to update improvement needs of facilities under the County''s jurisdiction.
Union Stationary Engineer Jones Lang LaSalle IncUnion Stationary EngineerPontiac, MIWhat your day-to-day will look like: Operate and monitor water tube and fire tube boilers, chilled water systems, sub-freezing chillers, cooling towers, air compressors, and building utility systems to ensure continuous facility operations. What this job involves: As a Stationary Engineer at JLL, you will be the backbone of critical powerhouse operations for a high-volume manufacturing facility, ensuring zero downtime through expert operation and maintenance of boilers, chillers, cooling towers, and building utility systems.
Optical Engineer RigakuOptical EngineerAuburn Hills, MIAbility to read/edit CNC programs and understand common G/M codes relevant to setup, motion, compensation, and safety interlocks; capable of making controlled program adjustments to improve process outcomes. Essential Functions: Set up, operate, and optimize CNC (and manual, as needed) grinding/polishing processes to meet specifications for optical components, such as dimensions, figure error, slope error, and surface roughness.
Senior CSU Electrical Engineer - Data Center Kiewit CorpSenior CSU Electrical Engineer - Data CenterDetroit, MIOur rapidly growing Industrial Design Group, which includes process, electrical, controls, structural, architectural, geotechnical, and civil disciplines, is a multi-faceted and leading-edge division of Kiewit with best-in-class technical expertise focused on EPC and design-build delivery of industrial projects in markets such as Food & Beverage, Consumer Products, Heavy Manufacturing, Industrial Buildings Industrial Water and Utilities. Our combined staff of more than 1,700 engineers and design professionals have expertise that spans all major engineering disciplines to serve transportation, power, water/wastewater, mining, building, and oil, gas & chemical markets.
Mechanical Engineer III Blue OriginMechanical Engineer IIISouthgate, Washingtonand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing, vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Aerospace Pyrotechnic Systems Engineer People First RecruitingAerospace Pyrotechnic Systems EngineerAuburn Hills, MIAt a privately held, long-established propulsion manufacturer, you will be the technical owner of pyrotechnic and energetic components—initiators, igniters, gas generators—shaping them from first concept through qualification. U.S. citizenship (required); ability to obtain a U.S. Government security clearance if needed — selected candidates may be subject to a government security investigation and must meet eligibility requirements for access to classified information.
Aerospace Energetics Engineer Williams InternationalAerospace Energetics EngineerPontiac, MIWilliams International is a Drug Free Workplace where all new team members and contractors are subject to pre-employment drug testing for the following controlled substances: marijuana, cocaine, PCP, amphetamines, opioids and alcohol as policy dictates. Bachelor's Degree or higher in a relevant science/engineering or systems/project management discipline (e.g., Chemistry, Mechanical Engineering, Aerospace Engineering, Chemical Engineering, Project Management).
Energtics Engineer Williams InternationalEnergtics EngineerPontiac, MIWilliams International is a Drug Free Workplace where all new team members and contractors are subject to pre-employment drug testing for the following controlled substances: marijuana, cocaine, PCP, amphetamines, opioids and alcohol as policy dictates. Bachelor's Degree or higher in a relevant science/engineering or systems/project management discipline (e.g., Chemistry, Mechanical Engineering, Aerospace Engineering, Chemical Engineering, Project Management).
Controls Engineer - Systems Integration LAPORTEControls Engineer - Systems IntegrationDetroit, MichiganLAPORTE, a consulting engineering firm with 25 years of experience and a strong presence across North America and Europe, is seeking an Intermediate Controls Engineer to join our growing team. If you’re looking for a challenging yet rewarding role where your expertise will make a difference in cutting-edge industries like pharmaceuticals and food & beverage manufacturing—this is the opportunity for you!
Electrical Supplier Quality Engineer Stellantis NVElectrical Supplier Quality EngineerAuburn Hills, MIThe Supplier Quality Development Engineer (SQD) within Stellantis, is accountable to lead and mange suppliers in advance quality planning and process development ensuring suppliers obtain high operational efficiency, are industrialized, and have capable processes which meet Stellantis quality and capacity requirements. Basic Qualifications: Bachelor of Science degree in Electrical, Mechanical (Bachelor of Science degree in Aerospace/Aeronautical, Biomedical/Biomechanical/Bioengineering, Chemical Engineering, or Mechatronics Engineering may be considered) from an ABET accredited program or equivalent program.
End Of Line (Eol) Quality Engineer - Battery Cell Development Center General MotorsEnd Of Line (Eol) Quality Engineer - Battery Cell Development CenterWarren, MIThe role serves as the independent quality voice for formation and EOL operations, partnering with process engineering, manufacturing, and cell design teams to prevent defects, reduce escape risk, and drive robust corrective actions. Update and maintain control plans for critical quality characteristics in formation and end of line testing such as charge/discharge profiles, gas evolution, capacity, impedance, leakage, and voltage decay behaviors in the finished cell.
Advance Cell Engineer General MotorsAdvance Cell EngineerWarren, MIThis position involves cross-functional collaboration with teams in Advanced Cell Technology, R&D, Purchasing, Cell Prototyping, Commercialization, and Legal to drive innovation, performance, cost efficiency, and scalability. This includes direct company sponsorship, entry of GM as the immigration employer of record on a government form, and any work authorization requiring a written submission or other immigration support from the company (e.g., H1-B, OPT, STEM OPT, CPT, TN, J-1, etc).
Engineer - Licensed Professional- 067131 Wayne County (MI)Engineer - Licensed Professional- 067131Detroit, MIUnder the general direction of the Senior Licensed Engineer, the Licensed Professional Engineer is responsible for aiding in the management and administration of local, state and federal programs and activities related to wastewater control systems, and other engineering matters as assigned. Assist with the project planning, designing, and construction of capital improvements for wastewater and stormwater facilities owned and/or operated by the County by evaluating needs and providing technical assistance for the identification and analysis of improvement alternatives and the selection of a final course of action.
Controls Engineer - Industrial Linked Professional ServicesControls Engineer - IndustrialDetroit, Michigan$100,000–$140,000 / yearWe are seeking an experienced Control Engineer to support industrial operations through PLC/DCS maintenance, automation support, and continuous improvement of electrical and control systems. This role is hands-on and includes field work, close collaboration with maintenance teams, and support of plant instrumentation and electrical systems.
Engineer III (Field Engineering) Detroit City CouncilEngineer III (Field Engineering)Detroit, MI$74,900–$119,900 / yearThis position also requires the ability to lift a minimum of fifty (50) pounds, walk, stand, or work for long periods of time, demonstrate normal color perception, hear audible alarms, detect abnormal equipment sounds, visually inspect equipment and processes at any time of the day or night. DWSD employees are subject to provisions of Court Orders entered in United States District Court, Eastern District of Michigan, Southern Division, Case No. 77-71100 with regard to certain terms and conditions of employment.
Design Release Engineer General MotorsDesign Release EngineerWarren, MIRequires three (3) years of experience with the following: Automotive ADHESIVES development or release; Product Engineering tools and processes; Reading schematic diagrams; Cross-functional experience in Calibration, Manufacturing, Validation, and VDDV; and Chemical composition knowledge. REQUIREMENTS: Bachelor's degree in Electrical Engineering, Mechanical Engineering, Chemical Engineering, or related field of study and Five (5) years of experience as a Design Release Engineer, Product Engineer, or related occupation.
Senior Chief Engineer \u2013 Transmission, Driveline \u0026 Gear Reducer Systems Stellantis NVSenior Chief Engineer \u2013 Transmission, Driveline \u0026 Gear Reducer SystemsAuburn Hills, MIThis job posting is for advanced positions in the Transmission, Driveline, and Gear Reducer Chief Engineering organizations with proven program management and execution experience in transmissions and drivelines. Manages Transmission and driveline system and interface DFMEA / DRBFM (team) reviews to ensure complete transparency and development of cohesive Design Controls leading to Robust DVP Actions.
Battery Cell Electrochemistry Analysis Engineer General MotorsBattery Cell Electrochemistry Analysis EngineerWarren, MIThe role combines electrochemical modeling, data science, battery design optimization, and cross-functional technical leadership to deliver models and tools that guide electrochemical, thermal, mechanical, electrical, and safety-related design decisions for electric vehicles. This position is a highly technical, interdisciplinary role focused on advancing the future of virtual engineering by developing, integrating, and deploying multi-physics battery cell and pack models.
Application Engineer GlobalchannelmanagementApplication EngineerMadison Heights, MichiganDuties: Primary responsibilities are technical leading on developmental and commercialized products by optimization of material application processes, and direct interaction with customers to troubleshoot and solve product and process related problems. Working in a laboratory environment, writing lab reports Mechanical Engineering or Chemical Engineering background or equivalent work Automotive Adhesives.
Technical Service Engineer Mitsubishi Performance Polymers DivisionTechnical Service EngineerCommerce Township, MichiganRemoteThe TSE is responsible for supporting the growth and development of the MCG North American businesses by providing technical assistance and innovation to customers on part design, tooling, processing and troubleshooting resolution, and materials selection utilizing the various MCG product portfolio. The Technical Service Engineer (TSE) position provides key technical process support and bridges the gap between application development and product development functions as well as customer needs and commercial strategies for both our automotive and non-automotive businesses.
Controls Engineer - Systems Integration Laporte L.C.C.Controls Engineer - Systems IntegrationDetroit, MichiganLAPORTE, a consulting engineering firm with 25 years of experience and a strong presence across North America and Europe, is seeking an Intermediate Controls Engineer to join our growing team. If you’re looking for a challenging yet rewarding role where your expertise will make a difference in cutting-edge industries like pharmaceuticals and food & beverage manufacturing—this is the opportunity for you!
NewSoftware/Integration Engineer Koch IncSoftware/Integration EngineerAuburn Hills, MI$100,000–$130,000 / yearSoftware/Integration Engineer - United States - 191680 - Koch. Koch Engineered Solutions.
Automation and Robotics Engineer Merit ManufacturingAutomation and Robotics EngineerWarren, MIWorking closely with Production, Maintenance, Quality, Operations, and Engineering, the Automation and Robotics Engineer troubleshoot equipment, programs and integrates automation systems, leads improvement projects, and helps transform manual or inefficient processes into reliable automated solutions. This role transforms production challenges into smarter processes, reduces downtime and manual strain, and builds the technology and infrastructure needed to support Merit's continued growth.
Optical Engineer Rigaku Americas HoldingOptical EngineerAuburn Hills, MichiganAbility to read/edit CNC programs and understand common G/M codes relevant to setup, motion, compensation, and safety interlocks; capable of making controlled program adjustments to improve process outcomes. Set up, operate, and optimize CNC (and manual, as needed) grinding/polishing processes to meet specifications for optical components, such as dimensions, figure error, slope error, and surface roughness.
NewSupplier Quality Engineer - Body Exterior - Bumpers, Fascias, Grilles GMSupplier Quality Engineer - Body Exterior - Bumpers, Fascias, GrillesWarren, MichiganIn this role, the SQE will work with suppliers to resolve manufacturing and quality issues, implement and monitor advanced quality planning systems, and provide technical support across launch, current production, and warranty-related activities for assigned exterior commodities. One or more years’ OEM or Tier 1 experience in automotive quality, manufacturing or engineering functions, including demonstrated experience and capability in any of the following areas: Statistical Problem Solving (Red X, DFSS, DMAIC).
Intern Manufacturing Engineer (Full Time) Piper Aircraft IncIntern Manufacturing Engineer (Full Time)MIThis position provides technical and administrative engineering support to Manufacturing Engineers while gaining practical experience in manufacturing process development, production problem solving, tooling coordination, continuous improvement, and shop floor support. The Manufacturing Engineering Intern will work with cross-functional teams to assist in developing, improving, and maintaining manufacturing processes used in the production of aircraft parts, sub-assemblies, and assemblies.
NewMaterials Engineer – Global Energy, Fluids & Lubricants (GEFL) GMMaterials Engineer – Global Energy, Fluids & Lubricants (GEFL)Warren, MichiganA Materials Engineer – Global Energy, Fluids & Lubricants (GEFL) is responsible for the technical development, test method design, validation, approval, and issue resolution of fuels, lubricants, and functional fluids that support GM products, propulsion systems, and manufacturing operations, with a strong emphasis on test development and data analysis. This individual contributor role supports technical leadership across one or more GEFL areas, including fuels, engine and driveline lubricants, EV/EDU fluids, coolants, hydraulic fluids, washer fluids, greases, and other specialty fluids.
Operating Engineer DTE Energy CoOperating EngineerDearborn, MIPlant equipment includes the following: (2) 15 MW Solar Titan 130 gas turbine generators with associated Rentech 185 KPPH Heat Recovery Steam Generator's with Duct Burners and Fresh Air Firing capability (1) Siemens-Dresser Rand 5 MW steam turbine generator (3) 27,500 MBH, and (1) 10,000 MBH steam to hot water heat exchangers, economizers, deaerators, boiler feed water pumps, condensate pumps. Must have knowledge of utility plant mechanical and electrical equipment, including gas turbines, HRSG's, motors, pumps, mechanical chillers, hot water generators, fluid systems, chemical handling, water treatment systems, pollution control equipment, AC/DC electrical distribution, control systems, and associated maintenance functions.
Senior Environmental Engineer GMSenior Environmental EngineerMilford, MichiganKey collaboration with site management and employees, Facilities Managers, regulatory agencies, internal and external community leaders and members, legal staff, GM and external audit services, utility service providers, Project Planning teams at the site & HQ, domain experts and chemical and resource management business partners. Experienced in at least one of the main environmental programs (air permits and regulation, water permits and regulations, or waste regulations) with demonstrated expertise in more than one environmental discipline or a highly developed ability in one specialty area.
Supplier Quality Engineer II IconmaSupplier Quality Engineer IIRedford, MI$32.09–$36.03 / hourOffers candidate ability to develop by working with several different manufacturing processes, global interaction with different suppliers & Client colleagues, internal cross functional experience among plant quality and operations, engineering, series management, and manufacturing engineering across our Axle and Transmission assembly lines. Strategically lead supplier performance improvement projects in an effort to increase the supplier capability of consistently meeting customer existing or new requirements.
NewTesting & Development Engineer II Oshkosh CorpTesting & Development Engineer IIMIHowever, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with Oshkosh Corporation's legal duty to furnish information. Typical responsibilities include, but are not limited to, the following: Independently scope, plan, execute, and report on small Test & Development projects; lead medium-sized projects with limited guidance and support large, complex programs under the direction of an Engineer III, Team Lead, or program technical leadership.
Process and Quality Engineer Standex EngravingProcess and Quality Engineer34497 Kelly Rd., MIFull timeThe Manufacturing (Process & Quality) Engineer is a high-visibility, hands-on role responsible for establishing stable, capable, and efficient manufacturing processes across assigned product value streams in a new program production start-up environment . This is a highly empowered role with direct impact on product quality, cost, and delivery performance, requiring strong technical ownership and the ability to operate effectively in a fast-paced, evolving production environment.
Brake Test Engineer Astemo IndianaBrake Test EngineerFarmington Hills, MichiganPlan, set up, and realize complete testing systems, which may involve the design and fabrication of fixtures, procurement of sensors and actuators, connection and configuration of data acquisition systems, and development of control software, drivers, or scripts. General Description: We are seeking a talented and self-motivated Brake Test Engineer to support the development and validation of automotive brake calipers and brake control systems.
Operating Engineer Level 4 DTE Energy CoOperating Engineer Level 4Detroit, MIAssets include (3) Carrier Chillers and (4) York Chillers with a total capacity of 14,500 Tons, (4) Ingersoll Rand Centrifugal Air Compressors and (1) Elliott Air Compressor with a total capacity of 27,600 CFM along with associated Cooling Towers, (61) Roof Top Air Handling Units (Gas Fired), (12) Electrical Sub-Stations; Lighting and Electrical Distribution Systems; and a WWTP capable of processing 500,000 gal/day of Industrial Waste. Monitoring of operating parameters and recording operating data, including production efficiencies, electrical usage, pressures, temperatures, vibration indications, alarms and other pertinent information related to the safe operation of the utility complex equipment.
Control Engineer II DTE Energy CoControl Engineer IIRiver Rouge, MIThis role supports cokemaking processes by engaging with plant personnel in the field and in the office to support ongoing operational and maintenance activities, identify and manage projects to improve operations, support response to emergent issues, and facilitate internal and external company communications as a collaborative member of the management team. In order to properly perform the integral functions of this job, the employee is required to: Sit, stand, or walk for a minimum of 8-hour shifts, including walking long distances, up and down stairs and on uneven ground.
Process Reliability Engineer Piramal Enterprises LtdProcess Reliability EngineerRiverview, MIThis enables us to offer a comprehensive range of services including Drug Discovery Solutions, Process & Pharmaceutical Development services, Clinical Trial Supplies, Commercial supply of APIs and Finished dosage forms. Data management skills: the ability to use statistical analysis tools to determine correlations between equipment performance/repair metrics and breakdown data, as well as the ability to interpret and communicate the results of the analysis.
Air Quality Engineer / Scientist GZA GeoEnvironmentalAir Quality Engineer / ScientistLivonia, MichiganWith a staff of interrelated professionals dedicated to providing high-level expertise on complex projects above, below and at ground-level, GZA’s experts provide seamless integration across practice areas, client type, and location. Bachelor’s degree in Environmental Engineering, Chemical Engineering, Atmospheric Science, Meteorology, or related engineering or scientific discipline (master’s degree a plus).
NewData Engineer - Senior Associate PwCData Engineer - Senior AssociateDetroit, MI$77,000–$202,000 / yearCertification in Cloud Platforms [e.g., AWS Solutions Architect, AWS Data Engineer, Google Professional Cloud Architect, GCP Data Engineer Microsoft Azure Solutions Architect, Azure Data Engineer Associate, Snowflake Core, Snowflake Databricks Data Engineer Associate] is a plus. Bachelor's Degree in Management Information Systems, Computer and Information Science, Systems Engineering, Electrical Engineering, Chemical Engineering, Industrial Engineering, Mathematics, Statistics, or Mathematical Statistics.