Cyclotron Engineer SOFIECyclotron EngineerHaverhill, MA$90,000–$100,000 / yearAdditionally, the Cyclotron-Support Engineer I is responsibility for first-line troubleshooting, maintenance, and repair of equipment associated with manufacturing, including manipulator arms, lead shielded hot cells, radiosynthesizers, etc. Perform diagnosis and repair on the following: Electronic equipment, electro-pneumatic systems, high vacuum systems, deionized chilled water systems, high voltage, target, and high-power RF systems.
NewManufacturing Engineer III| (NH) GCR Professional ServicesManufacturing Engineer III| (NH)Hudson, New HampshireContractorYou will collaborate with cross-functional teams, including design engineers, production personnel, and quality assurance, to optimize manufacturing operations and drive continuous improvement initiatives. As a Manufacturing Engineer, your primary responsibility will be to develop and improve manufacturing processes and systems to ensure the efficient and cost-effective production of defense and aerospace products.
Manufacturing Engineer III (NH) GCR Professional ServicesManufacturing Engineer III (NH)Hudson, New HampshireContractorYou will collaborate with cross-functional teams, including design engineers, production personnel, and quality assurance, to optimize manufacturing operations and drive continuous improvement initiatives. As a Manufacturing Engineer, your primary responsibility will be to develop and improve manufacturing processes and systems to ensure the efficient and cost-effective production of defense and aerospace products.
Quality Engineer III (NH) GCR Professional ServicesQuality Engineer III (NH)Hudson, New Hampshire$45–$58 / hourContractorThis role will participate and/or lead failure analysis in manufacturing and for field failures, develop troubleshooting & repair schemes, develop manufacturing process controls and documentation, interface with manufacturing and quality personnel to train and transfer processes & knowledge for successful volume production launches, and engage with suppliers as needed to drive improvement and implement process controls. This is a hands-on role that works with a team of quality engineers, technicians and inspectors that are engaged through the entire life cycle of product, starting during development, continuing with transitioning of product to manufacturing, and then supporting the continuous manufacture of product.
Director of Operations - Aerospace - Jaffrey, NH Michael Page USADirector of Operations - Aerospace - Jaffrey, NHJaffrey, NH$225,000–$250,000 / yearFull timeThe Director of Operations is a senior leadership position responsible for overseeing multiple manufacturing facilities and ensuring alignment between operational execution and long-term business strategy. This role will drive safety, quality, delivery, productivity, and profitability while leading operational transformation initiatives across a complex manufacturing organization.
Director of Operations in Amherst, NH Michael Page USADirector of Operations in Amherst, NHAmherst, NH$175,000–$200,000 / yearFull timeWith a long-standing reputation for engineering excellence and innovation, the organization partners with leading customers across advanced manufacturing markets and is committed to continuous improvement, employee development, operational excellence, and sustainable growth. An established precision manufacturing organization is seeking an experienced Director of Operations to oversee multiple production facilities and drive operational excellence, safety, quality, and performance across a multi-site environment.
NewSales Engineer GCR Professional ServicesSales EngineerAmesbury, Massachusetts$95,000–$120,000 / yearThis role collaborates closely with Sales, Engineering, Operations, and Quality to develop and deliver engineered solutions that meet customer requirements while driving revenue growth, customer satisfaction, and long-term business relationships. The Sales Engineer serves as the technical liaison between customers and internal teams, providing engineering expertise throughout the sales process.
ELECTRICAL ENGINEER IV System OneELECTRICAL ENGINEER IVTewksbury, MA$97.33 / hour10+ years designing and developing hardware solutions, including FPGA/VHDL, Altium, Xilinx ISE14.4, Linux, Ethernet, I2C, SPI. System One, and its subsidiaries including Joulé and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America.
NewManufacturing Automation Engineer - Middleton, MA Michael Page USAManufacturing Automation Engineer - Middleton, MAMiddleton, MA$110,000–$130,000 / yearFull timeWith a strong reputation for technical excellence, product innovation, and customer-focused problem solving, the organization develops advanced materials and technologies that help improve manufacturing efficiency, product quality, and operational performance. An industry-leading manufacturer is seeking a Manufacturing Automation Engineer to support automation, controls, and electrical systems across a dynamic production environment.
Senior Engineer Constellation EnergySenior EngineerMethuen, MA$138,600–$154,000Has completed assigned skills and knowledge development training (applicable Advanced Engineering, EPRI, and Constellation University training or industry provided training) to develop expert level of knowledge in designated areas. Now integrated with Calpine, our portfolio includes 55 gigawatts of capacity from nuclear, natural gas, geothermal, hydro, wind and solar facilities, with the generating capacity to power the equivalent of 27 million homes.
NewRF Engineer PlanIT GroupRF EngineerAndover, MAExpertise with RF subsystem and hardware including antennas, transmitters, receivers, microwave components, low noise amplifiers, high power amplifiers, advanced electronic modules, amplifiers, mixers, switches, frequency generation circuits and/or frequency conversion circuits is desired. In this role, the Staff RF Engineer will support the development and production of complex multi-function modules used in challenging high reliability applications in all phases of the product life cycle.
System Test Engineer CollaberaSystem Test EngineerTewksbury$55–$60 / hourTemporaryContractorThe contractor will support hands-on testing in a system test lab/integration test environment and will work with airport checkpoint screening equipment, test workstations, software applications, and related system components. This role will help ensure that checkpoint systems, subsystems, software, hardware, and integrated workflows meet functional, performance, reliability, and operational requirements.
Quality Engineer Michael Page USAQuality EngineerDerry, NH$100,000–$120,000 / yearFull timeThis is a growing, engineering-driven organization operating at the forefront of advanced technology within highly specialized industries. This is a hands-on Quality Engineer role supporting mechanical products through production, testing, and process improvement.
NewManufacturing Engineer - Exeter, NH Michael Page USAManufacturing Engineer - Exeter, NHExeter, NH$100,000–$140,000 / yearFull timeThis role offers hands-on involvement with tooling, capital equipment, production optimization and cross-functional engineering projects, while contributing to the delivery of critical, high-reliability products. A successful Program Manager lll should have the following qualifications: Bachelor's degree in a relevant engineering discipline preferred; equivalent experience will also be considered.
NewProject Engineer PlanIT GroupProject EngineerChelmsford, MAMaintain and update the Integrated Master Schedule (IMS) for Advanced Test Equipment (ATE) programs; ensuring alignment with milestones and resource plans. • Identifying and driving continuous process improvement initiatives that boost project execution, efficiency, and improve documentation quality.
Manufacturing Engineer, Molding in Durham, NH Michael Page USAManufacturing Engineer, Molding in Durham, NHDurham, NH$110,000–$115,000 / yearFull timeEmployees benefit from working in a collaborative environment where manufacturing, engineering, and operations teams work closely together to solve complex challenges and deliver impactful solutions. An innovative manufacturing organization is seeking a Manufacturing Engineer with molding expertise to support the development, implementation, and continuous improvement of production processes and equipment.
NewControls Engineer - Materials - Groton, MA Michael Page USAControls Engineer - Materials - Groton, MAGroton, MA$110,000–$125,000 / yearFull timeThe role serves as a key technical resource for plant operations, maintenance, and equipment modernization efforts while driving automation upgrades across the site. This Automation & Controls Engineer position supports a 24/7 manufacturing facility through automation system reliability, controls troubleshooting, and continuous improvement initiatives.
NewControls Engineer Michael Page USAControls EngineerConcord, NH$115,000–$145,000 / yearFull timeBachelor's degree in Electrical Engineering, Controls Engineering, Automation Engineering, or a related technical discipline; equivalent industrial controls experience will also be considered. Strong understanding of industrial networking concepts, including Ethernet communications, IP addressing, subnetting, and managed network switches.
HPC Operations Engineer NVIDIAHPC Operations EngineerWestford, CaliforniaThe base salary range is 124,000 USD - 195,500 USD for Level 2, and 152,000 USD - 241,500 USD for Level 3. As an HPC Operations Engineer at NVIDIA, you will play a pivotal role in ensuring the flawless operation of our high-performance computing (HPC) environment.
Lead Engineer, Grid Operations Technology- Operations Support( Hybrid Schedule) Eversource EnergyLead Engineer, Grid Operations Technology- Operations Support( Hybrid Schedule)Manchester, New HampshireLead a team of engineers to support the Company’s electric control center operators by optimizing the distribution system using the distribution network advanced functionality of the Distribution Management System which include Automatic Feeder Reconfiguration (AFR), Load Volt/VAR Management (LVM), Planned Outage Study and DER/Load Forecasting. Individual will lead a team of engineers to support the Company’s electric control centers by providing guidance on optimizing the system for delivering safe, reliable, and resilient energy to our customers while maximizing the value of clean energy resources.
Operations Process Engineer MuntersOperations Process EngineerAmesbury, MassachusettsThe engineer serves as a hands-on technical resource for production, leading root cause investigations, implementing process improvements, supporting new equipment integration, and developing sustainable manufacturing processes that improve operational performance and support business growth. Job Summary : The Operations Process Engineer is responsible for supporting day-to-day manufacturing operations, improving production processes, increasing equipment reliability, and driving continuous improvement initiatives within the Wheel Plant.
Operations Process Engineer Munters ABOperations Process EngineerAmesbury, MA$97,200–$147,500 / yearThe engineer serves as a hands-on technical resource for production, leading root cause investigations, implementing process improvements, supporting new equipment integration, and developing sustainable manufacturing processes that improve operational performance and support business growth. Job Summary: The Operations Process Engineer is responsible for supporting day-to-day manufacturing operations, improving production processes, increasing equipment reliability, and driving continuous improvement initiatives within the Wheel Plant.
NewSenior HPC and LSF Operations Engineer NVIDIASenior HPC and LSF Operations EngineerWestford, CaliforniaBeyond day-to-day operations, the role drives improvements in observability, service reliability, and automation, ensuring the EDA compute environment remains resilient, measurable, and aligned with long-term engineering demands. As a member of the Hardware Infrastructure EDA Compute team, you will optimize, scale, and support workload scheduling systems that directly impact design velocity and infrastructure efficiency.
NewManufacturing Engineer - Machining Operations Seurat Technologies IncManufacturing Engineer - Machining OperationsWilmington, MA$85,000–$120,000 / yearSeurat's proprietary Area Printing process, developed at Lawrence Livermore National Labs (LLNL), allows metal components to be manufactured at price points and quality levels that compete directly with conventional manufacturing techniques, enabling the reshoring of supply chains and promoting the decarbonization of industry. The position combines hands-on machining and CNC programming with post-processing, fixture and tooling design, manufacturing strategy, capital equipment planning, and continuous improvement.
Senior Cyber Defense Infrastructure Engineer (Security Tooling Operations) Idexx Laboratories IncSenior Cyber Defense Infrastructure Engineer (Security Tooling Operations)NH$120,000–$150,000 / yearYou will serve as the operational owner for core security platforms, working closely with Security Architecture, Security Operations, Cloud Engineering, and IT teams to ensure tools are properly deployed, integrated, maintained, and ready to support detection and response activities at scale. An innovation leader in every industry we serve, we follow our Purpose and Guiding Principles to help pet owners worldwide keep their companion animals healthy and happy, to ensure safe drinking water for billions, and to help farmers protect livestock and poultry from diseases.
Operations Quality Engineer 2nd shift - onsite Andover, MA RTX CorpOperations Quality Engineer 2nd shift - onsite Andover, MAMALead/Drive Advanced Product Quality Planning (APQP) initiatives (PFMEA, control Plans, SPC, etc.) using baseline metrics and future demand with the ability to perform verification/validation of improvements and efficiencies to facilitate defect prevention. What You Will Do: Baseline factory metrics (scrap, rework, FPY, etc.), identify top drivers, forecast future demand for top drivers and identify areas of opportunity for improvement assuring clear identification, control, and disposition of nonconformities.
Weekend Principal Operations Quality Engineer RTX CorpWeekend Principal Operations Quality EngineerMALead/Drive Advanced Product Quality Planning (APQP) initiatives (PFMEA, control Plans, SPC, etc.) using baseline metrics and future demand with the ability to perform verification/validation of improvements and efficiencies to facilitate defect prevention. Baseline factory metrics (scrap, rework, FPY, etc.), identify top drivers, forecast future demand for top drivers and identify areas of opportunity for improvement assuring clear identification, control, and disposition of nonconformities.
Senior Operations Quality Engineer - 4th Shift RTX CorpSenior Operations Quality Engineer - 4th ShiftMAEngage Manufacturing Defect Prevention Teams (DPT) to ensure alignment on top priorities (using baseline data and future forecast) to drive containment, Root Cause Analysis and associated Corrective Action Implementation. Baseline factory metrics (Scrap, Rework, FPY, etc.), identify top drivers, forecast future demand for top drivers and identify areas of opportunity for improvement.
Senior Engineer II-Contract Manufacturing Operations Microchip Technology IncSenior Engineer II-Contract Manufacturing OperationsLawrence, MA$70,304–$205,000 / yearThis role drives end-to-end operational execution-capacity, quality, cost, delivery, and NPI scale-up-while partnering with Supply Chain, Quality, Engineering, and Procurement to ensure consistent product performance for PCBA and system/box-build manufacturing. Drive cost and productivity initiatives (labor efficiency, line balancing, takt/capacity optimization, waste reduction, EOQ/JIT/Kanban), including validation of savings.
Operations Quality Engineer II RTX CorpOperations Quality Engineer IIMAEngage MFG Defect Prevention teams to ensure alignment on top priorities (using baseline data and future forecast) to drive containment, Root Cause Analysis and associated Corrective Action Implementation. Baseline factory metrics (Scrap, Rework, FPY, etc.), identify top drivers, forecast future demand for top drivers and identify areas of opportunity for improvement.
Principal Operations Quality Engineer RTX CorpPrincipal Operations Quality EngineerAndover, MALead/Drive Advanced Product Quality Planning (APQP) initiatives (PFMEA, control Plans, SPC, etc.) using baseline metrics and future demand with the ability to perform verification/validation of improvements and efficiencies. Engage manufacturing defect prevention teams to ensure alignment on top priorities (using baseline data and future forecast) to drive containment, Root Cause Analysis and Corrective Action Implementation.
Lead Engineer - CCaaS Operations MaximusLead Engineer - CCaaS OperationsManchester, NHFull timeMaximus compensation is based on various factors including but not limited to job location, a candidate's education, training, experience, expected quality and quantity of work, required travel (if any), external market and internal value analysis including seniority and merit systems, as well as internal pay alignment. - Lead design of advanced cloud contact center solutions, including routing, IVR, workforce management, analytics, and reporting, incorporating AI technologies (e.g., Copilot, Amazon Bedrock, Amazon Q in Connect, Kore.ai, Murf.ai) .
Senior Operations Quality Engineer RTX CorpSenior Operations Quality EngineerMAQualifications You Must Have: Bachelor's in Science, Technology, Engineering, or Mathematics (STEM) or other technical field of study, and a minimum of five (5) years prior relevant related experience, OR an Advanced Degree in a related technical field and minimum three (3) years experience. Engage MFG DPT teams to ensure alignment on top priorities (using baseline data and future forecast) to drive containment, Root Cause Analysis and associated Corrective Action Implementation.
Senior Software Engineer - ML Operations Symbotic IncSenior Software Engineer - ML OperationsWilmington, MA$149,000–$204,600 / yearApplying next-gen technology, high-density storage and machine learning to solve today's complex distribution challenges, Symbotic enables companies to move goods with unmatched speed, agility, accuracy and efficiency. Expect to develop solutions based on the latest ML tools and industry thinking and allow us to automate the development, testing and deployment of ML models and tools that will process data from various sensors.
Operations Quality Engineer II 2nd shift onsite Andover, MA RTX CorpOperations Quality Engineer II 2nd shift onsite Andover, MAMAEngage manufacturing defect prevention teams to ensure alignment on top priorities (using baseline data and future forecast) to drive containment, Root Cause Analysis and Corrective Action Implementation. Lead/Drive Advanced Product Quality Planning (APQP) initiatives (PFMEA, control Plans, SPC, etc.) using baseline metrics and future demand with the ability to perform verification/validation of improvements and efficiencies.
Industrial Engineer - Semiconductor Operations BAE Systems PlcIndustrial Engineer - Semiconductor OperationsNashua, NHfor description visit the url https://jobs.baesystems.com/global/en/job/BAE1US125700BREXTERNAL/Industrial-Engineer---Semiconductor-Operations .
Staff Software Engineer - Fleet Operations Symbotic IncStaff Software Engineer - Fleet OperationsWilmington, MA$149,000–$204,600 / yearApplying next-gen technology, high-density storage and machine learning to solve today's complex distribution challenges, Symbotic enables companies to move goods with unmatched speed, agility, accuracy and efficiency. This is a high-impact role ideal for engineers who thrive in dynamic, collaborative environments and are passionate about building real-time systems that power next-generation robotics.
Back Office Operations Manager - Tolling Operations WSP Global IncBack Office Operations Manager - Tolling OperationsConcord, NHAny unsolicited resumes, including those submitted to hiring managers or other business leaders, will become the property of WSP and WSP will have the right to hire that candidate without reservation - no fee or other compensation will be owed or paid to the recruiter, employment agency, or other staffing service. WSP is seeking a Back Office Operations Manager to lead day-to-day operations for a high-volume customer service organization supporting complex, transaction-based services.
VP Engineering Enablement & Operations (3978) GBGVP Engineering Enablement & Operations (3978)Manchester, NHSenior leadership experience in engineering enablement, operations, platform, or technology strategy roles. This role is responsible for enabling a global engineering organization of 300 technology professionals to operate with speed, consistency, and excellence.
VP Engineering Enablement & Operations (3978) GB Group PLCVP Engineering Enablement & Operations (3978)Manchester, NHTo chat to the Talent Attraction team and find out more about our benefits and why we're a great place to work, drop an email to behired@gbgplc.com and we'll be in touch. Senior leadership experience in engineering enablement, operations, platform, or technology strategy roles.
NewDirector of Operations - Aerospace - Jaffrey, NH Michael Page InternationalDirector of Operations - Aerospace - Jaffrey, NHJaffrey, New Hampshire$225,000–$250,000 / yearFull timeThe successful applicant should have:Bachelor's degree in Engineering, Operations Management, Business, Manufacturing, or related fieldMBA preferred10-15+ years of progressive manufacturing leadership experience5+ years leading multi-site manufacturing operationsAerospace manufacturing experience strongly preferredExperience in precision machining, engineered products, bearings, motion control, or metal manufacturingBackground in highly regulated manufacturing environmentsProven success implementing Lean Manufacturing and Six Sigma methodologiesTrack record driving operational excellence and continuous improvementStrong experience leading large, geographically dispersed teamsDemonstrated change management and organizational transformation experienceFinancial and operational leadership expertise including capital planning and cost controlExcellent communication, leadership, and stakeholder management skillsAbility to operate effectively in a complex, multi-site environmentWhat's on offer:Executive leadership role with significant influence across multiple facilitiesOpportunity to shape manufacturing strategy and operational performanceExposure to advanced aerospace and precision manufacturing operationsCollaborative and innovation-focused leadership teamStrong long-term career growth potentialCompetitive compensation, bonus, and benefits packageIf you are an experienced leader ready to make a significant impact, apply today for immediate consideration! Contact Madison Weber Quote job ref JN-072026-7057176Job summary:Sector: Engineering & ManufacturingSub Sector: Production, ManufacturingIndustry: Industrial / ManufacturingWhere: InternationalContract Type: PermanentConsultant name: Madison WeberJob Reference: JN-072026-7057176
Operations Program Manager II BAE SystemsOperations Program Manager IIHudson, NH$118,095–$200,762 / yearRESPONSIBILITIES: + Project management of continuous improvement program + Cost Account Manager responsible for cost and schedule of all operations labor and material + Ensure all deliverables meet contractual requirements + Ensure all deliverables are delivered to the customer according to the manufacturing schedule + Promotes a strong sense of teamwork among personnel supporting various phases of the program efforts + Develop, Execute and Monitor plans that support the Business Operating Plan + Ensure Manufacturing execution is aligned with Program and Customer demand / requirements + Work with production team on any capability transitions to Sustainment + Work with Factory supports to resolve issues that require Supplier or Program or Customer action + Be the Operations Leader for Customer / Program requirements such as (Repair Turn Around Time and EW Availability) + Support factory compliance requirements and activities + Support programs across several geographic locations with occasional travel to support programs. + Needs to identify and mitigate technical and schedule risks to program execution + Must have a current/active Secret Clearance or ability to attain one AUTHORITY: + Provide work direction for Operations personnel + Cost Account Manager authority for Operations and for Program staff level.
Senior Manager, Omni Channel Distribution & 3PL Operations Maverick Work Wear IncSenior Manager, Omni Channel Distribution & 3PL OperationsMA$120,000–$145,000 / yearYou will ensure our 3PL partners consistently hit SLA expectations, inventory remains accurate and available, returns are processed efficiently, wholesale partners receive compliant and on-time shipments, and the business has clear visibility into distribution performance as we expand into additional locations and channels. Collaborate cross-functionally with Customer Experience, Partner Services, Sales Operations, Logistics, Supply Planning, Growth & Retention Marketing and Product Teams to optimize the customer experience across, inbound operations, returns management, fulfillment and outbound distribution.
Operations Program Manager II BAE Systems PlcOperations Program Manager IINH$118,095–$200,762 / yearAbout BAE Systems Electronic Systems BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. In addition to supporting program execution, OPM''s are required to support non-recurring engineering program phases, including driving early involvement in development and transition to production programs of the various Ops functions.
Operations Porgram Manager I BAE Systems PlcOperations Porgram Manager IHudson, NH$97,008–$164,914 / yearAbout BAE Systems Electronic Systems BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. In addition to supporting program execution, OPM''s are required to support non-recurring engineering program phases, including driving early involvement in development and transition to production programs of the various Ops functions.
Operations Program Manager I BAE Systems PlcOperations Program Manager INashua, NH$97,008–$164,914 / yearAbout BAE Systems Electronic Systems BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. In addition to supporting program execution, OPM''s are required to support non-recurring engineering program phases, including driving early involvement in development and transition to production programs of the various Ops functions.
Tolling Operations Project Manager WSP Global IncTolling Operations Project ManagerConcord, NHWSP is seeking a highly experienced Tolling Operations Project Manager (PM) to lead the end-to-end management, execution, and delivery of large-scale, mission-critical programs. Any unsolicited resumes, including those submitted to hiring managers or other business leaders, will become the property of WSP and WSP will have the right to hire that candidate without reservation - no fee or other compensation will be owed or paid to the recruiter, employment agency, or other staffing service.
Senior Manager, Machine Learning Operations (Perception) Symbotic IncSenior Manager, Machine Learning Operations (Perception)Wilmington, MA$180,000–$247,500 / yearThis role oversees data pipelines, deployment infrastructure, and monitoring systems, working closely with perception algorithm and controls teams to ensure robust, scalable performance of models across large fleets of robots and warehouse environments. The team develops and operates perception and machine learning systems that enable robots to understand and interact with complex warehouse environments, supporting safe, efficient, and scalable operations across customer sites.
Operations Program Manager Leonardo DRS IncOperations Program ManagerFitchburg, MA$96,720–$138,284 / yearSeveral factors can influence the pay scale, including but not limited to: Federal contract labor categories and contract wage rates, collective bargaining agreements, geographic location, business considerations, scope, and responsibilities of the position, local or other applicable market conditions, and internal equity. This includes scheduling the entire program to successfully launch manufacturing operations, working cross functionally with Engineering, Quality, Manufacturing and leading projects and process to drive On Time Delivery.
Director, Security Operations & SOC Leader MACOM Technology Solutions Holdings IncDirector, Security Operations & SOC LeaderLowell, MA$168,000–$255,000 / yearSupport cybersecurity due diligence for mergers, acquisitions, and divestitures - evaluating target security posture, control maturity, and inherited risk, and informing integration planning and Day-1 security requirements, in coordination with Corporate Development, Legal, and GRC. Own, operate, and report on the security operations stack - endpoint detection and response (EDR), email security, removable-media/USB encryption, DLP/insider-risk tooling, and related controls - including configuration, health, coverage, and lifecycle.