NewElectrical and Instrumentation Engineer JobotElectrical and Instrumentation EngineerPasadena, TX$145,000–$165,000 / yearInformation collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. We are seeking a highly skilled Instrumentation & Electrical Engineer to support the design, maintenance, and continuous improvement of electrical and instrumentation systems within a specialty chemicals, resins, and fibers manufacturing environment.
NewInstrumentation and Electrical Engineer JobotInstrumentation and Electrical EngineerPasadena, TX$120,000–$145,000 / yearInformation collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. We are seeking a highly skilled Instrumentation & Electrical Engineer to support the design, maintenance, and continuous improvement of electrical and instrumentation systems within a specialty chemicals, resins, and fibers manufacturing environment.
Instrumentation Engineer 804 TechnologyInstrumentation EngineerSeattle, WA$85–$95 / yearContractorThey are responsible for supporting the operational, technical, ground and flight test success of the instrumentation group by producing instrumentation specifications, sensor selection, wire diagrams, installation diagrams (FTEO packages), sensors and system calibration, signal conditioning, derived parameters, cockpit displays, data validation, data tracking, data recording, documentation and conformity. Airborne Flight Test support will include instrumentation systems test equipment setup, inflight test monitoring and operational configuration changes to achieve flight test card requirements.
NewInstrumentation & Controls Engineer (I&C Engineer) JobotInstrumentation & Controls Engineer (I&C Engineer)Janesville, WI$100,000–$135,000 / yearInformation collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. We are currently on the search for an Instrumentation & Controls Engineer (I&C Engineer) to join our team with a proven background in the design and implementation of control systems!
Supervisory Instrumentation Engineer III JT4 LLCSupervisory Instrumentation Engineer IIIEdwards AFB, California$125,000–$180,000 / yearA Bachelor of Science in Engineering from an ABET-accredited academic institution and 4 years of related engineering experience, or an accredited Master of Science in engineering and a minimum of 2 years of related engineering experience, or an accredited doctorate degree in engineering are required for this position. The Supervisory Instrumentation Engineer III has the responsibility of modification, installation, testing, evaluation, repair, and documentation of airborne test instrumentation, data acquisition systems, as well as the supervision and administration of a section of engineers and technicians across multiple shifts.
Electrical and Instrumentation Engineer Aminov Search PartnersElectrical and Instrumentation EngineerAshtabula, OH$90,000–$120,000 / yearThis pivotal position ensures the enhancement and safety of our site's electrical and instrumentation systems, with a strong emphasis on electrical reliability and troubleshooting. Join a leading global manufacturer that prides itself on fostering work-life balance, encouraging professional growth, and maintaining a cooperative work environment.
Principal Instrumentation and Controls (I&C) Design Engineer GlobalPunditsPrincipal Instrumentation and Controls (I&C) Design EngineerGreenville, SCContractorPerform a broad range of I&C design activities, including design definition, control systems architecture and development, digital systems, Programmable Logic Controller (PLC), Distributed Control Systems (DCS), network configuration, logic development, network switches, process controls, Piping and Instrumentation Diagram (P&ID) development support and review, Human Machine Interfaces (HMI), communication protocols, routing, and layout, Safety Integrity Level (SIL), and procurement activities. Represent control systems in model reviews; closely monitor 3D modeling prepared by the design group using review software Review and audit specifications for DCS, PLC, and Safety Instrumented Systems (SIS) hardware and software applications Monitor DCS / PLC / SIS design developed by the design group.
NewGround Systems Engineer II - Instrumentation and Controls Rocket LabGround Systems Engineer II - Instrumentation and ControlsWattsville, VATo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope.
NewInstrumentation and Electrical Supervisor JobotInstrumentation and Electrical SupervisorMosheim, TN$85,000–$110,000 / year3ph) electrical systems and troubleshooting, VFD's, burner controls, smart meters, PLC/DCS controls & methods, automated systems, vibration monitoring systems, load cells, control valves, blueprint reading, mathematics, preventive/predictive maintenance, and Process Safety Management (PSM). Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal.
NewInstrumentation Operations Engineer III JT4 LLCInstrumentation Operations Engineer IIIEdwards AFB, California$100,000–$140,000 / yearA Bachelor of Science in Engineering from an ABET-accredited academic institution and four years of related engineering experience, or an accredited Master of Science in Engineering and a minimum of two years of related engineering experience, or an accredited doctorate degree in engineering are required for this position. Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver’s license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee’s ability to maintain employment.
Instrumentation Design Engineer II JT4 LLCInstrumentation Design Engineer IIEdwards AFB, California$86,000–$123,000 / yearSome jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license or other licenses/certifications, and the inability to obtain and maintain the required clearance, license or certification may affect an employee's ability to maintain employment. JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
NewProcess Engineer VBeyond CorporationProcess EngineerInwood, WVFull timeSkills required: • Prior experience working as a Process Engineer in industrial plant environments such as Chemical, Agrochemical, Pharmaceutical, Fine & Specialty Chemicals, and Food & Beverages industries. • Strong ability to independently prepare and interpret Process Flow Diagrams (PFDs), Piping & Instrumentation Diagrams (P&IDs), perform mass and energy balance calculations, and carry out hydraulic calculations without supervision.
NewGeotechnical Engineer JobotGeotechnical EngineerArvada, CO$90,000–$160,000 / yearInformation collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. With a strong presence in Colorado, including a major office in Wheat Ridge, the company supports a wide range of infrastructure and development projects such as transportation systems, water resources, energy facilities, and commercial construction.
NewMechanical HVAC Engineer JobotMechanical HVAC EngineerAkron, OH$80,000–$100,000 / yearWe provide Complex Design-Build services including Process, Mechanical, Piping & Layout, HVAC / Dust Control, Fire Protection & Plumbing, Electrical, Instrumentation & Controls, Civil & Structural, and Architectural; ensuring all projects are designed and constructed to specifications, on schedule and within budget. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal.
NewControls Engineer JobotControls EngineerMaryville, TN$100,000–$150,000 / yearInformation collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. Coordinates high power installations with electrical contractors, including specification and communication of power distribution requirements including mains 3-phase circuit ampacities and branch circuit details.
NewElectrical Engineer JobotElectrical EngineerAppleton, WI$90,000–$130,000 / yearInformation collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. In this role, you’ll contribute to innovative project work, support sustainable industrial and infrastructure solutions, and help shape the future of our clients’ facilities and systems.
NewManufacturing Applications Engineer – Water & Wastewater Industrial Equipment JobotManufacturing Applications Engineer – Water & Wastewater Industrial EquipmentTustin, CA$95,000–$128,000 / year
NewIndustrial Software Engineer JobotIndustrial Software EngineerAllentown, PA$120,000–$145,000 / yearInformation collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. We are a global leader in automation, conveyor systems, robotics, and material handling solutions serving customers across the food & beverage, pharmaceutical, personal care, automotive, and electronics industries.
NewSr Commissioning Engineer (Data Centers) – Remote JobotSr Commissioning Engineer (Data Centers) – RemoteDallas, TXRemote$120,000–$165,000 / yearSuccessful candidates will have experience in Electrical Systems & Equipment with a focus in Data Centers and Mission Critical Facilities; experience and an understanding of Building MEP Systems Design, Construction, and Commissioning of Critical Systems ranging in size, rating, and complexity; Commissioning, Testing and Troubleshooting of Electrical Systems and related controls. Knowledgeable with common mechanical, and controls-related building equipment, including: Engine generators / Uninterruptible power supplies & battery systems / Medium and low-voltage electrical switchgear/ PLC controls and sequences of operations / Automatic transfer switches / Static transfer switches / Power distribution units / Busways.
NewSr Manufacturing Engineer JobotSr Manufacturing EngineerKnoxville, TN$100,000–$130,000 / yearDirect production line support, through CFT activity, for safety, quality, productivity and cost management: setup and utilize KPI measures to direct improvement actions, collaboration with QA department to plan, execute and document countermeasures for quality issues, manage process changes through planning, testing implementation and document revision, train production & maintenance members on new equipment/systems. New Product Launch: process design, cost planning, budget creatin/management, capital approvals, machine specifications, project and supplier schedule management, equipment runoff and validation, control documentation development.
NewLead Electrical Engineer - Industrial JobotLead Electrical Engineer - IndustrialAlexander, AR$120,000–$200,000 / yearThe Electrical Construction Superintendent is responsible for planning, directing, and coordinating all electrical related activities and coordinating electrical subcontractor activities including underground duct banks, sub-stations, electrical distribution, cable tray, E-rooms, automation, instrumentation, etc. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal.
NewPrototype Diesel Technician (Instrumentation) Technical Professionals GroupPrototype Diesel Technician (Instrumentation)New Carlisle, INCompany DescriptionTechnical Professionals Group provides validation, durability, mileage accumulation and quality testing services for vehicle and mechanized equipment projects and programs in the engineering, R&D, quality control and quality assurance sectors of the automotive industry. This position will involve hands-on construction or modification of prototype vehicles, including medium-duty trucks, buses, and heavy-duty trucks with various powertrains such as diesel, electric, and alternative fuels.
Instrumentation Technician Diedre Moire Corp.Instrumentation TechnicianPasco, WA$90,000–$140,000 / yearFull timeCONSIDERED EXPERIENCE INCLUDES: Metrologist Maintenance Calibration Technician Metrology Analytical Laboratory Instrumentation Validation Chromatography Mass Spectrometry HPLC UPLC GC MS GC/MS Chemistry Analyzers #DiedreMoire #JobSearch #JobHunt #JobOpening #Hiring #Job #Jobs #Careers #Employment #fieldservicejobs #technicianjobs #LabTechnicianJobs #MetrologistJobs #CalibrationTech. Metrology Metrologist Field Service Tech Technician Engineer Install Repair Calibrate Maintain Validate Maintenance Laboratory Instrument Instrumentation LCMS HPLC MS Mass Spec Spectrometry SCIEX Waters Agilent - .
Optical Systems Engineer (Hybrid) GCR Professional ServicesOptical Systems Engineer (Hybrid)Pasadena, CaliforniaThese include, but are not necessarily limited to, requirements for NS/GLAO Image Quality/Normalized Point Source Sensitivity (IQ/PSSN), spatial uniformity, PSSN Temporal Stability, Pupil Stability, and Stray light requirements rooted in each of the system level budgets, their ties to science requirements, and their translation to engineering units. The Optical Systems Engineer will work closely with the Chief Scientist, Project Scientist, Instrument Scientist, instrument teams, and wavefront controls group and Systems Engineering group to interpret science requirements and flowing them down into technical specifications.
Test Engineer II (FL) GCR Professional ServicesTest Engineer II (FL)Gulf Breeze, Florida$30–$33 / hourContractorTest Automation and Continuous Improvement: Identify opportunities for test automation and develop automated test scripts and frameworks to streamline testing processes and increase efficiency. *Collaborate with cross-functional teams, including design engineers and project managers, to understand the requirements and specifications of defense and aerospace systems.
Test Engineer II (Torrance, CA) - 2 positions GCR Professional ServicesTest Engineer II (Torrance, CA) - 2 positionsTorrance, California$36–$46 / hourContractorTest Planning and Strategy: Collaborate with cross-functional teams, including design engineers and project managers, to understand the requirements and specifications of defense and aerospace systems. Test Automation and Continuous Improvement: Identify opportunities for test automation and develop automated test scripts and frameworks to streamline testing processes and increase efficiency.
Electrical Engineer Naval Nuclear LaboratoryElectrical EngineerWest Mifflin, PA$117,900–$184,300 / yearBachelors degree from an accredited college or university in a related technical, engineering or science field and a minimum of 9 years of relevant experience; or Masters degree from an accredited college or university in a related technical, engineering or science field and a minimum of 7 years of relevant experience; or Doctorate degree from an accredited college or university in a related technical, engineering, science field and a minimum of 3 years of relevant experience; or Currently a Principal Reactor Training Engineer, Refueling Engineer, or Field (RPCO) Engineer at the Company. Naval Nuclear Laboratory personnel are FMP employees who work at four DOE facilities: Bettis Atomic Power Laboratory, Knolls Atomic Power Laboratory, Kenneth A. Kesselring Site, and Naval Reactors Facility, and at the U.S. Department of Defense-owned Nuclear Power Training Unit-Charleston.
Semiconductor Process Engineer MicronSemiconductor Process EngineerBoise, IDApplication of Semiconductor device physics, including metal-oxide-semiconductor (MOS); 2. Device characterization & measurement methodologies; 3. Semiconductor process flows as it pertains to device electrical performance, including CMOS fabrication and metallization for interconnect; 4. Industry-leading instrumentation platforms used in semiconductor device measurement such as B1500, WGFMU, Oscilloscope, Pulse generators, SPA. Operate with minimal supervision and collaborates directly with cross-functional teams, including Process Engineering, Design Development Quality Assurance (DDQA), Device Engineering and Test (DET), and Scribe to meet project-level objectives and deliver high-quality, decision-ready parametric data.
NewCalibration and Metrology Quality Engineer L3Harris TechnologiesCalibration and Metrology Quality EngineerHuntsville, ALExperience maintaining a calibrated asset inventory using calibration management software (such as GageTrack or similar), ensuring all equipment is tracked, scheduled, and documented according to defined calibration requirements. Bachelor’s degree and a minimum of 4 years of related experience, OR a graduate degree and a minimum of 2 years of related experience, OR in lieu of a degree, a minimum of 8 years of related experience.
Computer & Electrical Engineer, Advanced Naval Nuclear LaboratoryComputer & Electrical Engineer, AdvancedWest Mifflin, PA$85,200–$133,200 / yearThe successful candidate's duties will include maintaining and implementing improvements to hardware and software system designs for various shipboard control systems, development and maintenance of procedures for equipment operation, troubleshooting instrumentation and control system issues, developing and performing equipment tests, performing detailed technical evaluations, and authoring technical reports. Naval Nuclear Laboratory personnel are FMP employees who work at four DOE facilities: Bettis Atomic Power Laboratory, Knolls Atomic Power Laboratory, Kenneth A. Kesselring Site, and Naval Reactors Facility, and at the U.S. Department of Defense-owned Nuclear Power Training Unit-Charleston.
NewComputer & Electrical Engineer, Senior Naval Nuclear LaboratoryComputer & Electrical Engineer, SeniorWest Mifflin, PA$94,800–$148,200 / yearNaval Nuclear Laboratory personnel are FMP employees who work at four DOE facilities: Bettis Atomic Power Laboratory, Knolls Atomic Power Laboratory, Kenneth A. Kesselring Site, and Naval Reactors Facility, and at the U.S. Department of Defense-owned Nuclear Power Training Unit-Charleston. For nearly 70 years, the Naval Nuclear Laboratory has developed advanced nuclear propulsion technology, provided technical support, and trained world-class nuclear operators to ensure the safe and reliable operation of our nation's submarine and aircraft carrier Fleets.
Real-Time Control and Data Acquisition Engineer (Level I - V) Georgia Systems OperationsReal-Time Control and Data Acquisition Engineer (Level I - V)Tucker, GeorgiaFull timeAssists with engineering reviews relating to EMS functions such as databases design and integrity, communications integrity, metering data timeliness and quality, and other related systems ability to provide quality and timeliness of information. This representation allows the generation and transmission control room operators the ability to economically dispatch generation, monitor facilities, control high side protective and sectionalizing devices, monitor alarms and events, collect and present accurate, reliable data in real-time.
Sr. Test Engineer – AN2024 Marvin Test SolutionsSr. Test Engineer – AN2024Irvine, CAAbility to technically lead a team of cross functional engineers and providing leadership, mentorship and guidance to complete technical and design tasks to achieve project goals. Responsibilities: You will work in an exciting and fast-paced environment designing and integrating test systems and Test Program Sets (TPS) for commercial and military electronics.
Power Plant Electrical Systems Engineer Naval Nuclear LaboratoryPower Plant Electrical Systems EngineerWest Mifflin, PA$95,700–$149,600 / yearBachelors degree from an accredited college or university in a related technical, engineering or science field and a minimum of 6 years of relevant experience; or Masters degree from an accredited college or university in a related technical, engineering or science field and a minimum of 4 years of relevant experience; or Doctorate degree from an accredited college or university in a related technical, engineering or science field and a minimum of 1 year of relevant experience; or Currently a Senior Reactor Training Engineer, Refueling Engineer, or Field (RPCO) Engineer at the Company. Naval Nuclear Laboratory personnel are FMP employees who work at four DOE facilities: Bettis Atomic Power Laboratory, Knolls Atomic Power Laboratory, Kenneth A. Kesselring Site, and Naval Reactors Facility, and at the U.S. Department of Defense-owned Nuclear Power Training Unit-Charleston.
Flight Test Engineer 804 TechnologyFlight Test EngineerSeattle, WA$85–$95 / hourFull timeDesired for Cross-Training Opportunities: Aerospace engineering experience in Flight Sciences, including experience in aerodynamic testing and/or design; flight testing of aircraft performance and handling characteristics, including experience with take-off; landing; climb and route performance; static-source error corrections and stall speed testing; longitudinal & lateral/directional stability and control; minimum control speeds; stall characteristics; high speed characteristics, crosswind takeoff/landing and flight into known icing. The primary role in this position is as a Flight Test Engineer who is responsible for coordinating test and certification requirements, authoring and executing flight and ground test plans for a wide variety of aircraft platforms including FAA Part 23, 25, 27 and 29 as well as new and novel technology demonstrator programs such as electric and hydrogen propulsion.
NewAssociate, Software Engineer L3Harris TechnologiesAssociate, Software EngineerAnaheim, CAUnder general direction of the Manager of Software Engineering, this position will focus on development and application of advanced control theory for power conversion systems, develops and applies advanced control systems methods, theories and research technologies in the investigation, optimization, and solution of complex and advanced technical problems for power conversion equipment. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
NewElectrical Engineer Vaco LLCElectrical EngineerCincinnati, OH$105,000–$160,000Determining compensation for this role (and others) at Vaco by Highspring depends upon a wide array of factors including but not limited to: the individual’s skill sets, experience and training; licensure and certification requirements; office location and other geographic considerations; other business and organizational needs. Vaco by Highspring values a diverse workplace and strongly encourages women, people of color, LGBTQ+ individuals, people with disabilities, members of ethnic minorities, foreign-born residents, and veterans to apply.
Nuclear Engineer, Entry Level Naval Nuclear LaboratoryNuclear Engineer, Entry LevelNiskayuna, NY$63,900–$97,800 / yearExperience with thermal-hydraulic analysis, scripting, and coding preferably with reactor safety computer codes such as RELAP5-3D or MELCOR or post-processing in MATLAB or Python; Strong interest in fluid dynamics, heat transfer, thermodynamics, and other related subjects; Ability to understand large/complex systems including fluids, heat transfer, instrumentation and control systems, and electrical components; Strong written and verbal communications skills with an ability to articulate technical ideas in a clear and concise manner. The successful candidate's duties could include, but are not limited to: thermal hydraulic model development and analysis, researching and developing probabilistic models for reactor plant safety, understanding and communicating nuclear plant accident progression, developing scripts to run our models and post-process results, working productively and efficiently with a team of knowledgeable professionals to document different analyses, and understanding and communicating results to coworkers, managers, and Naval Reactors.
ENGINEER - RESEARCH ENGINEER - Gas Turbine Combustion System Engineer Southwest Research Institute - FulltimeENGINEER - RESEARCH ENGINEER - Gas Turbine Combustion System EngineerSan Antonio, TXFull timeTypical application areas include: supercritical CO2 oxy-fuel combustion systems, gas turbine combustion systems, solid-fuel combustion systems, RDEs, and various high speed propulsion applications. Apply principles of machine design, piping/pressure vessel design, process controls and instrumentation, fluid dynamics, thermodynamics, and heat transfer to develop test systems and specify components.
RESEARCH ENGINEER - SR. RESEARCH ENGINEER - Mechanical Designer/Engineer for Propulsion System Southwest Research Institute - FulltimeRESEARCH ENGINEER - SR. RESEARCH ENGINEER - Mechanical Designer/Engineer for Propulsion SystemSan Antonio, TXFull timeApply principles of machine design, piping/pressure vessel design, process controls and instrumentation, fluid dynamics, thermodynamics, and heat transfer to develop test systems and specify components. Who We Are: The Propulsion & Energy Machinery Section performs engineering R&D in the fields of gas turbine combustion, air-breathing propulsion, industrial heat and power, and liquid propulsion.
RESEARCH ENGINEER - SR. RESEARCH ENGINEER - Mechanical and Dynamics Test Engineer Southwest Research Institute - FulltimeRESEARCH ENGINEER - SR. RESEARCH ENGINEER - Mechanical and Dynamics Test EngineerSan Antonio, TXFull time5+ years: Designing, running, validating, or overseeing at least one (or a combination) of the following tests: Vibration, Mechanical Shock, Seismic, Thermal, Temperature Cycle, Altitude, Weathering / Corrosion, and Water Ingress. Requirements: Requires a Bachelors degree in Mechanical Engineering, Aerospace Engineering, Civil Engineering, Materials Engineering, Electrical Engineering, Engineering Physics, Industrial Engineering or similar engineering degree field with related experience.
Clinical Engineer Technician III MedStar HealthClinical Engineer Technician IIIWashington, DC$28.76–$48.96Under the general oversight of the Clinical Engineering leadership team the Clinical Engineering Technician III as an expert technician maintains clinical equipment with minimal supervision through the effective use of the medical equipment management plan and all medical equipment policies and procedures and manufacturer or alternative equipment maintenance (AEM) specifications. related military work/training in mechanical electrical bio medical engineering or academic work or actual work experience aligned with AAMI's Core Competencies for the Biomedical Equipment Technician.
Stand-In Attack Weapon (SiAW) Engineer DCS CorporationStand-In Attack Weapon (SiAW) EngineerNiceville, FLDCS Corporation is seeking a talented Electronic Warfare Mission Data Engineer to apply a variety of analytical techniques to formulate and solve problems; plan for future technologies; conduct research and development; and define requirements for systems. Experience in Airborne Electronic Combat (EC), using Electronic Intelligence (ELINT), developing operationally suitable mission data for to support EC systems is highly desired.
NewElectronic System Design and Analysis Engineer (Experienced or Senior) BoeingElectronic System Design and Analysis Engineer (Experienced or Senior)Berkeley, MO$112,200–$151,800 / yearThe Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The Boeing Test Operations and Engineering (TO&E) team in Berkeley, Missouri is seeking an Electronic System Design and Analysis Engineer to join our Instrumentation Installation Design group to support all major programs in the St.
NewAssociate Electronic System Design and Analysis Engineer BoeingAssociate Electronic System Design and Analysis EngineerBerkeley, MO$91,800–$124,200 / yearThe Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The Boeing Test Operations and Engineering (TO&E) team in Berkeley, MO is seeking an Associate Electronic System Design and Analysis Engineer to join our Instrumentation Installation Design group to support all major programs in the St.
NewTest and Inspection Embedded Software Engineer (Experienced or Senior) BoeingTest and Inspection Embedded Software Engineer (Experienced or Senior)Hazelwood, MO$126,650–$171,350 / yearLevel 4: Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science and 9+ years of related work experience OR Bachelor’s Degree and 13+ years of directly related work experience OR 17+ years of related, relevant experience . The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. .
NewSenior Low Observables Design & Integration Engineer - Pole Model BoeingSenior Low Observables Design & Integration Engineer - Pole ModelBerkeley, MO$136,850–$185,150 / yearThe Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The Boeing Defense, Space & Security (BDS) - Phantom Works organization is seeking a Senior Low Observables (LO) Design & Integration Engineer to lead design and analysis activities supporting the fabrication and test of an RCS pole model.
Electrical Engineer Butler America AerospaceElectrical EngineerWindsor, CT$60–$66 / hourContractorTest - Design and maintain test process including hardware, software and documentation for evaluating the performance of electrical hardware; perform calculations, estimations and laboratory tests required to verify the soundness and suitability of a design; assist in creation of drawings for manufacturing of new parts and products. The successful candidate will also possess: · Strong Electrical Engineering knowledge and aptitude, including, analog / digital design, power electronics, serial communication interfaces RS422/RS485/CAN, signal integrity , sensor and instrumentation signal conditioning, battery backup and UPS systems .
2026 JT4 Engineer Opportunities in Las Vegas, NV JT4 LLC2026 JT4 Engineer Opportunities in Las Vegas, NVLas Vegas, NevadaEngineer V: The candidate must have a Bachelor of Science in Engineering from an ABET-accredited academic institution and 14 years of related engineering experience, or have an accredited Master of Science in Engineering with at least 10 years of related engineering experience, or have an accredited doctoral degree in Engineering with at least 8 years of related engineering experience. Engineer IV: The candidate must have a Bachelor of Science in Engineering from an ABET-accredited academic institution and 8 years of related engineering experience, or have an accredited Master of Science in Engineering with at least 6 years of related engineering experience, or have an accredited doctoral degree in Engineering with at least 4 years of related engineering experience.
Sr. Structures Engineer (Part-Time) JT4 LLCSr. Structures Engineer (Part-Time)Las Vegas, Nevada$185,000–$250,000 / yearThis position provides independent technical assessment, peer review, limited integration-level engineering support, and airworthiness risk evaluation for aircraft structural modifications, sustainment actions, external stores integration, instrumentation installations, and contractor-developed engineering packages. The position is intended for highly experienced senior engineering personnel capable of performing advanced technical review, mentoring junior engineers, teaching structural integration concepts, and providing technical leadership within complex airworthiness and aircraft modification environments.