June 8, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.
ul>While performing the duties of this job, the employee occasionally works in wet or humid conditions (non-weather), works near moving mechanical parts or within risk of electrical shock. Intermediate knowledge of Excel, Word required; Ability to multi-task and prioritize work; excellent time management skills required.
Springfield, MA24 days ago
While an hourly range is posted for this position, an eventual hourly rate is determined by a comprehensive salary analysis which considers multiple factors including but not limited to: job-related knowledge, skills and qualifications, education and experience as compared to others in the organization doing substantially similar work, if applicable, and market and business considerations. As a senior technical resource, the engineer provides subject matter expertise, mentoring, and strategic guidance, translating complex technical risks into clear, actionable insights for both technical teams and executive leadership.
The Quality Engineer will support new product introductions by developing inspection methods, programming CMMs, and ensuring product compliance to specifications. This role is highly hands-on, collaborating with cross-functional teams to drive quality from prototype through production.
Bloomfield, CT21 days ago
This role supports New Product Introduction efforts by ensuring inspection strategies, measurement systems, and quality documentation are production‑ready. You'll work closely with engineering and manufacturing teams to deliver compliant, high‑quality products from launch through production.
You will report directly into the Director of Engineering and have the opportunity to: Develop and optimize CNC machining processes, including tooling, fixtures, and programming for multi-axis machines. My client is a aerospace & defense manufacturing company located in Windsor, CT that prides itself on its innovative and continuous improvement approach to manufacturing.
The Senior Mechanical Engineer will play a key role within the R&D function, responsible for designing, developing, testing, and improving mechanical systems, components, and products from concept through production. Our Client is a global powerhouse in integrated technology solutions, revolutionizing how companies design, develop, and manufacture products made from textiles by automating, accelerating, and seamlessly streamlining every step of the process.
June 12, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.
CONSIDERED EXPERIENCE INCLUDES: Field Service Mechanic Tech Maintenance Technician Engineer Install Repair Calibrate Maintain Extrusion Blow Molding Injection Blow Molding or Injection Stretch Blow Molding Equipment Extruders Injection Molder Blow Molders Screw Plasticizers Screw Rotating Motors Guide Rails Moving Platens Heater Bands Hydraulic Pumping Systems Pneumatic systems Die Heads Dies Molds Mold Clamps Cold and Hot Cutters Blow Pins Control Panels Instrumentation Motion Controllers Motors Actuators Sensors Pumps Valves Gearboxes Cooling Fans Heating Bands #DiedreMoire #JobSearch #JobHunt #JobOpening #Hiring #Job #Jobs #Careers #Employment #jobposting #fieldservicejobs #technicianjobs #MaintenanceMechanicJobs #PlasticJobs #BlowMoldingJobs. Described compensation is not definite nor precise and may be estimated and approximate and is negotiable depending on market conditions and candidate availability and other factors and is solely at the discretion of employers.
Acting as a key technical resource, you'll work closely with engineering, quality, and production teams to bring complex components into full production. They are known for their investment in advanced CNC technologies, strong engineering collaboration, and commitment to continuous improvement and quality excellence.
Springfield, MA21 days ago
This role partners with cross‑functional teams to ensure product quality, compliance, and risk mitigation across new and existing products. You'll lead qualification, root cause analysis, and continuous quality improvements that directly impact customers and business performance.
East Hartford, CT30+ days ago
strong>Education: Material Process Engineer- BS degree in Material Science, Chemical Engineering, Applied Physics, or related technical field and minimum 8 years of relevant experience. The candidate will collaborate with other internal engineering disciplines, engineering management and manufacturing customers as part of an Integrated Product Team to ensure the successful transition and implementation of technology into products.
East Hartford, CT10 days ago
p>The candidate will collaborate with other internal engineering disciplines, engineering management and manufacturing customers as part of an Integrated Product Team to ensure the successful transition and implementation of technology into products. - BS degree in Material Science, Chemical Engineering, Applied Physics, or related technical field and minimum 8 years of relevant experience.
Wallingford, CT7 days ago
Job Purpose: The Entry Level Chemical Engineer at ORAFOL AMERICAS INC will be responsible for supporting the design, development, and optimization of manufacturing processes. The engineer will collaborate with cross-functional teams to implement process improvements and contribute to the continuous advancement of manufacturing operations.
You will work at the intersection of materials science, high temperature processing, and high-speed manufacturing, solving complex engineering problems and driving improvements with the opportunity to influence future fiber platform developments. In this role, you will take ownership of fiber draw tower processes for R&D product and process development, optimizing the conversion of glass preforms into high-performance optical fiber used in next-generation communications, industrial, and photonics systems.
East Hartford, CT30+ days ago
Candidate must be able to work effectively in a multidisciplinary, collaborative team environment focused on innovation and have demonstrated both verbal and written communication skills including: Typically requires a University Engineering Degree or equivalent experience and minimum 5 years prior relevant experience, or an advanced Degree in a related field and minimum 3 years experience. The Additive Manufacturing Process and Capability Center (AMPCC) encompasses a critical mass of Additive Manufacturing (AM) process and industrialization experts, the necessary equipment, and develops the strategic collaborations needed to rapidly mature the technology and manufacturing readiness of AM.
Torrington, CT30+ days ago
Our focus on being a customer intimate organization has led us to where we are today: a rapidly expanding force within our industry, an innovative product portfolio, extraordinary employees, and a bright future based on creating quality offerings with a dedication to business growth. Today, our expansive portfolio of innovative adhesives, coatings, and maskants are supported by dispense solutions and cutting-edge UV and LED light-curing equipment.
East Hartford, Connecticut6 days ago
Candidate must be able to work effectively in a multidisciplinary, collaborative team environment focused on innovation and have demonstrated both verbal and written communication skills including: Typically requires a University Engineering Degree or equivalent experience and minimum 5 years prior relevant experience, or an advanced Degree in a related field and minimum 3 years experience. Active and existing security clearance required after day 1
At RTX, the world's largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world’s most complex problems.
p>As a part of the global industrial organization Marmon Holdings-which is backed by Berkshire Hathaway- youll be doing things that matter, leading at every level, and winning a better way. Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law.
Wallingford, CT30+ days ago
You'll also join a highly multicultural and diverse team of more than 4,000 employees in four regions who - as part of one of the world's leading coating resins companies - serve customers in over 100 countries across the globe. We offer We are proud to offer an international working experience with a tight-knit network of employees, making it easy to connect and learn from people all across our different functions.
Torrington, CT11 days ago
The role focuses on improving safety, quality, yield, and productivity through disciplined application of engineering principles, structured problem-solving, and close collaboration with Production, Quality, Product Engineering, and R&D teams. Summary:
In this role, the Manufacturing Process Engineer serves as a hands-on process expert responsible for developing, implementing, and sustaining manufacturing processes and equipment used in fuel cell production.
Develop repair processes for gas turbine engine components including fan cases, stators, nozzles, composite panels, vanes and other engine hardware. Lead or contribute to project teams focused on new repair repair capability development, process improvements, new equipment implementation.
The role requires strong analytical, technical, and communication skills, along with hands‑on involvement in process documentation, continuous improvement, and resolving shop floor issues. The Process Engineer is responsible for designing, optimizing, and supporting manufacturing processes to improve efficiency, reduce cost, and ensure high-quality aerospace production.
East Granby, Connecticut30+ days ago
div>Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law.
The Process Engineer is responsible for optimizing production processes and equipment, achieving performance targets, ensuring a safe work environment, maintaining technical documentation, and supporting quality improvement through root cause analysis and corrective actions.
Our mission is to provide leading optical innovations and solutions by designing, manufacturing and supplying the best optical fibers, fiber cable and components and devices for our customers, with exceptional service that creates value for our shareholders, customers and employees. Headquartered in Norcross, Georgia, U.S.A., Lightera operates with a global footprint, serving customers across telecommunications, enterprise, industrial, generative AI, data centers, 5G/6G, utilities, medical, aerospace, defense, and sensing markets.
The role emphasizes the improvement of manufacturing capabilities and the development of innovative solutions for products used in commercial and military applications involving high bypass, turbo-jet, prop or shaft gas turbine/turbo-machinery systems. Manufacturing Process Engineer is responsible for leading the optimization of processes and workflows while providing advanced technical support for both existing and new repair processes.
Springfield, MA30+ days ago
Process Engineers work in every aspect of a project - controls, packaging, mechanical, electrical, building system, architecture, etc., from the conceptual stages to design completion, and throughout construction. They provide expertise in flow diagrams, alterations, constraints, piping and instrumentation diagrams (P&ID), layout, install, and commissioning and start-up.
This role performs a wide range of duties to analyze, develop, and improve manufacturing processes, including operational sequence, tooling, methods, equipment, and controls, to efficiently meet quality and production requirements. AMETEK operates in highly competitive market segments and continues to grow through four core strategies: Operational Excellence, Strategic Acquisitions, New Products, and Global & Market Expansion.
East Hartford, CT30+ days ago
The engineer will work in a team environment and be responsible for developing, improving, and troubleshooting chemical processes such as priming, painting, electroplating, cleaning, etching, stripping, anodizing, and corrosion resistant coatings on various aerospace alloys. The work scope includes working in a laboratory, and as required the supply base, touching all aspects of the product life-cycle from technology and product development to manufacturing and repair / aftermarket support.
Torrington, CT18 days ago
The Process Engineer partners closely with Quality, Production, Tooling, Maintenance, Engineering, and Program Management teams to support daily manufacturing operations, new product introductions, and continuous improvement initiatives. The Process Engineer – Quality Focus is responsible for developing, validating, controlling, and continuously improving manufacturing processes with an emphasis on process capability, product quality, and long-term process robustness within a regulated medical device manufacturing environment.
New Haven region, CT24 days ago
em> Additionally, since this role has broad reach across the manufacturing plants, interfacing with designers, and running and leading new product trials, you must have an excellent ability to communicate and interact with a variety of people throughout the organization. This is a combination role and will function as a corporate resource, supporting multiple plants, being a key SME resource to both manufacturing.
East Hartford, CT30+ days ago
Candidate must be able to work effectively in a multidisciplinary, collaborative team environment focused on innovation and have demonstrated both verbal and written communication skills including: Typically requires a University Engineering Degree or equivalent experience and minimum 8 years prior relevant experience, or an advanced Degree in a related field and minimum 5 years experience. The Additive Manufacturing Process and Capability Center (AMPCC) encompasses a critical mass of Additive Manufacturing (AM) process and industrialization experts, the necessary equipment, and develops the strategic collaborations needed to rapidly mature the technology and manufacturing readiness of AM.
East Hartford, CT30+ days ago
Own manufacturing processes from concept through production implementation and support* Develop and optimize CNC programs for multi-axis milling, turning, and/or grinding operations* Lead tool selection and cutting strategy development to maximize efficiency and tool life* Design fixtures and work holding solutions to ensure repeatability and throughput* Work directly with production leads and machinists to resolve issues in real time* Provide hands-on shop floor support for setups, prove-outs, and process validation* Drive material review (MRB) processes and implement corrective actions* Collaborate with lab engineers, quality, and operators to meet all technical requirementsQualifications:* Minimum 5+ years of multi-axis milling, turning, and grinding process experience (aerospace experience is HIGHLY preferred).* Hands-on experience with CNC programming, fixture design, and tool selection* Lean manufacturing experience* Proven ability to work directly with production teams in a fast-paced environment* Strong ability to organize and prioritize work to meet production demands* Proficient at reading and interpreting customer drawings, specifications, and GD&T* Proficient with computer systems, CAD/CAM experienceEducation Requirements:* BS degree (Engineering discipline preferred).Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises.
Manchester, Connecticut30+ days ago
p style="text-align:inherit"/>. As an employee at Essity, you will belong to a team where you feel valued, are safe, supported to grow and challenged to generate business results in a friendly and open atmosphere.
You'll partner closely with finance teams to redesign processes, introduce automation, and support continuous improvement efforts. Our teams reflect the customers, patients, members and communities we serve and we are committed to fostering a workplace where every colleague feels valued and that they belong.
East Hartford, Connecticut6 days ago
Candidate must be able to work effectively in a multidisciplinary, collaborative team environment focused on innovation and have demonstrated both verbal and written communication skills including: Typically requires a University Engineering Degree or equivalent experience and minimum 8 years prior relevant experience, or an advanced Degree in a related field and minimum 5 years experience. Active and existing security clearance required after day 1
At RTX, the world's largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world’s most complex problems.
East Hartford, CT30+ days ago
However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. Instructions: To be considered for the above position, please visit our website www.onebarnes.com, click on careers, search for the job posting in which you are interested and submit your resume online At Barnes, career development is a shared responsibility in which all employees are encouraged to develop, improve, and enhance their skills and professional growth to support our business objectives.
Manchester, CT30+ days ago
Support product/material development and project implementation according to Design for Six Sigma Master Daily Direction Setting (DDS) zero loss flow chart and coach teams in the application. • Contributes to AM (Autonomous Maintenance), PM (Planned Maintenance) and FI (Focused Improvement) pillars by providing technical expertise, helping to drive improvements in equipment performance and process reliability.
Springfield, MA30+ days ago
Process Engineers work in every aspect of a project - controls, packaging, mechanical, electrical, building system, architecture, etc., from the conceptual stages to design completion, and throughout construction. They provide expertise in flow diagrams, alterations, constraints, piping and instrumentation diagrams (P&ID), layout, install, and commissioning and start-up.