April 9, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.
April 9, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.
Hudson, New Hampshire11 days ago
You will collaborate with cross-functional teams, including design engineers, production personnel, and quality assurance, to optimize manufacturing operations and drive continuous improvement initiatives. As a Manufacturing Engineer, your primary responsibility will be to develop and improve manufacturing processes and systems to ensure the efficient and cost-effective production of defense and aerospace products.
A successful candidate will assist ASIC development through creating custom analog layouts, floor planning entire chips, high level problem solving, and executing tape outs. ¿ Perform or guide physical layout, including floor-planning, and simulate circuits using extracted parasitic, contribute to design-for-test development.
April 30, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.
p class="MsoNormal">•Work will be performed using oscilloscopes, voltage meters, electronic loads, bench top power supplies, varies, test fixtures, environmental ovens and other electronic associated equipment. •Testing product models whether actual or prototype (bead board) to environmental conditions in order to establish operational stability, reliability and conformity to design.
A successful candidate has strong experience with Azure Cloud services, is self-driven, enjoys learning new technologies, and is willing to stretch themselves to become a stronger engineer and mentor others around them to do the same. Developing effective cloud infrastructure, enforcing good architectural principles, providing technical oversight, and ensuring security best practices are implemented and followed.
Andover, Massachusetts30+ days ago
Join a focused team of engineers bringing highly complex, dense, rugged and secure electronic packaging solutions to our nation’s warfighters and first responders. • Ability to work in a fast-paced engineering services group supporting multiple time zones within the US and internationally.
Woburn, Massachusetts30+ days ago
Client is focused on delivering National Defense capabilities by driving mission-focused strategies to develop advanced technology systems enabling enduring products and solutions focused on achieving the customer vision. Applicants are expected to be self-motivated, detail oriented and have a demonstrated ability to effectively communicate with all levels of management and individual contributors on the program team through strong written and verbal communication skills.
Expertise with RF subsystems and hardware including antennas, transmitters, receivers, microwave components, low noise amplifiers, high power amplifiers, advanced electronic modules, amplifiers, mixers, switches, frequency generation circuits, and frequency conversion circuits is desired. Basic Minimum Requirements: • Bachelor of Science Degree in Electrical Engineering preferred or BS Degree in Science, Technology, Engineering, or Math (STEM) accepted plus a minimum of 5+ years of relevant professional engineering experience.
p>Local Manufacturer of electronics products and is seeking an experienced Electronic & Software Engineer for the growing Engineering department. - Develop manufacturable designs including embedded software and qualification strategies to exhibit design meets customer requirements.
Testing will include subjecting product model with either actual or prototype breadboard to environmental conditions to establish operational stability, reliability and conformity to design. • Responsible for generating preliminary documentation for fabrication of prototype models which may include fabricating, testing, troubleshooting and repairing analog and digital/analog circuits.
li>Experience working with ArcGIS applications and technologies (such as ArcGIS Hub, ArcGIS Map Viewer, ArcGIS REST APIs, ArcGIS API for Python, ArcGIS Maps SDKs). You will act as a service owner and trusted decision‑maker, shaping priorities, balancing tradeoffs, and ensuring our web services remain reliable, scalable, and valuable to customers over time.
p/>As a valued team member, you can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements, as well as managers who will encourage career development and growth opportunities, including Professional Engineer License (PE), Project Management Professional (PMP), Leadership training, Formal Mentorship Programs, Management opportunities. June 1, 2026
For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.
As the Product Engineer II – Utilities, you will collaborate with customers, industry teams, and other product development team members to design, develop, and support the right geospatial solutions for electric, gas, water, sewer, stormwater and telecommunications agencies. Design and author test cases for functionality, performance, scalability, and durability; execute both manual and automated tests, analyze test results, and report results.
p>Requirements: Highly motivated individual with a proven track record (7+ years) of innovative work designing precision mechanisms and/or opto-mechanical assemblies.
An emerging leader – experience as a technical lead, project lead, and/or working directly with customers.
p>Designs tooling to produce parts using CAD (Solid Works, Logo Press &/or CADKEY) to customer specifications under instruction to ascertain specifications and objectives, nature of technical problem, and possible solutions such as part redesign, substitution of material or parts, or rearrangement of parts and subassemblies. Collaborates with Tool Room, Maintenance, & Production to implement improvements for employee safety, production quality, and overall process effectiveness utilizing continuous improvement techniques.
p>• You believe customers are more than a number: Samsara engineers enjoy a rare closeness to the end user and you will have the opportunity to participate in customer interviews, collaborate with customer success and product managers, and use metrics to ensure our work is translating into better customer outcomes. • You want to impact the industries that run our world: The software, firmware, and hardware you build will result in real-world impact—helping to keep the lights on, get food into grocery stores, and most importantly, ensure workers return home safely.
a href="https://www.fmapprovals.com/Certification-Services/Marks-and-Auditing" rel="nofollow noopener noreferrer" target="_blank">Audits include various manufacturers responsible for producing products for compliance with FM Approvals requirements. Job Description: FM Approvals is an international leader in third-party testing and certification services.
The Air Force Program Execution Office for Intelligence, Surveillance, Reconnaissance and Special Operations (PEO ISR SOF) has the collective Air Force Materiel Command (AFMC) mission responsibility to manage and execute the modernization, development, testing, production, fielding, and sustainment of the ISR SOF portfolio, which includes over 200 programs for the United States Air Force (USAF) and foreign allies. Lead development and review of system security documentation including System Security Management Plans, Program Protection Plans, Security Risk Analyses, OPSEC Plans, and security CONOPS in accordance with DoDI 5000.02,
p>• You believe customers are more than a number: Samsara engineers enjoy a rare closeness to the end user and you will have the opportunity to participate in customer interviews, collaborate with customer success and product managers, and use metrics to ensure our work is translating into better customer outcomes. • You want to impact the industries that run our world: The software, firmware, and hardware you build will result in real-world impact—helping to keep the lights on, get food into grocery stores, and most importantly, ensure workers return home safely.
p style="line-height:normal;margin-bottom:0in">The Assured Compliance Assessment Solution (ACAS) Cybersecurity Engineer will be a member of the Air Operation Center (AOC) cybersecurity team and will be responsible for assisting with the implementation, maintenance, and operation of the Assured Compliance Assessment Solution (ACAS) suite of tools. Under the Department of the Air Force Program Executive Office for Command, Control, Communication, and Battle Management (DAF PEO C3BM), Kessel Run technologies make up the DAF BATTLE NETWORK, the systems-of-systems designed to help the Joint Force make operational decisions faster than our adversaries.
div>The Assured Compliance Assessment Solution (ACAS) Cybersecurity Engineer will be a member of the Air Operation Center (AOC) cybersecurity team and will be responsible for assisting with the implementation, maintenance, and operation of the Assured Compliance Assessment Solution (ACAS) suite of tools. Under the Department of the Air Force Program Executive Office for Command, Control, Communication, and Battle Management (DAF PEO C3BM), Kessel Run technologies make up the DAF BATTLE NETWORK, the systems-of-systems designed to help the Joint Force make operational decisions faster than our adversaries.
Under the Department of the Air Force Program Executive Office for Command, Control, Communication, and Battle Management (DAF PEO C3BM), Kessel Run technologies make up the DAF BATTLE NETWORK, the systems-of-systems designed to help the Joint Force make operational decisions faster than our adversaries. The Assured Compliance Assessment Solution (ACAS) Cybersecurity Engineer will be a member of the Air Operation Center (AOC) cybersecurity team and will be responsible for assisting with the implementation, maintenance, and operation of the Assured Compliance Assessment Solution (ACAS) suite of tools.
C3BM’s main efforts are Architecture and Systems Engineering (ASE), Operational Response Team (ORT), and multiple mission integration teams such as Air, Maritime, and multiple acquisitions consisting of both the Advanced Battle Management System (ABMS) and Space. The MIT is responsible for translating operational requirements into technical solutions, developing integrated architecture, assessing risks, supporting acquisition execution strategies, and coordinating test and evaluation activities to ensure capabilities are delivered to operational users.
The C2ISR Division provides worldwide life cycle support across the spectrum of the C2ISR capabilities based enterprise; including supply, distribution, materiel management, acquisition, system engineering and maintenance, financial planning and budgeting, security, flight test, and contracting functions. EPASS support is required to execute the major GNS programs in support of the C2ISR Division, to include: AF DCGS Network Infrastructure Transformation (NIT), Extended Tether Program (ETP), and Global Command and Control System – Air Force Infrastructure (GCCS-AF (I)).
The Aerospace Management Systems Division programs, develops, delivers, and sustains air traffic management, CNS/ATM avionics expertise, and weather sensing and forecast capabilities, enabling military, civil, allied, and Foreign Military Sales customers to achieve their mission. Develop and maintain system architectures, interface definitions, and Model-Based Systems Engineering (MBSE) artifacts supporting Air Traffic Control (ATC), Command & Control (C2), communications, networking, tactical data links, and radio systems.
p style="line-height:normal;margin-bottom:0in">Command, Control, Communications, and Battle Management (C3BM) has been tasked with delivering an integrated Department of the Air Force (DAF) Battle Network providing resilient decision advantage and enabling the USAF, USSF, Joint, and Coalition Force to win against the pacing challenge. The MIT is responsible for translating operational requirements into technical solutions, developing integrated architectures, assessing and mitigating risks, supporting acquisition execution strategies, and coordinating test and evaluation activities to ensure capabilities are delivered to operational users.
The Air Force Program Execution Office for Intelligence, Surveillance, Reconnaissance and Special Operations (PEO ISR SOF) has the collective Air Force Materiel Command (AFMC) mission responsibility to manage and execute the modernization, development, testing, production, fielding, and sustainment of the ISR SOF portfolio, which includes over 200 programs for the United States Air Force (USAF) and foreign allies. Experienced in requirements development, production and deployment, and operation and support, architectures development & implementation, modeling & simulation including but not limited to Model Based Systems Engineering principles, verification & validation, technical data package development and sustainment, and principles of configuration management.
You will collaborate with architects, engineers, and cross-functional stakeholders across Samsara to brainstorm, design, rapidly prototype, and productionalize AI-driven features and capabilities that integrate deeply into real business workflows. Samsara (NYSE: IOT) is the pioneer of the Connected Operations™ Cloud, which is a platform that enables organizations that depend on physical operations to harness Internet of Things (IoT) data to develop actionable insights and improve their operations.
p>More information about the holding company and overall organization can be found at
The MIT is responsible for translating operational requirements into technical solutions, developing integrated architectures, assessing and mitigating risks, supporting acquisition execution strategies, and coordinating test and evaluation activities to ensure capabilities are delivered to operational users. C3BM’s main efforts are Architecture and Systems Engineering (ASE), Operational Response Team (ORT), and multiple mission integration teams such as Air, Maritime, and multiple acquisitions consisting of both the Advanced Battle Management System (ABMS) and Space.
QUALIFICATIONSMust have strong HVAC skills including knowledge of cooling towers, boilers, pneumatics, RTU, heat pumps, duct work and energy management systems as well as plumbing, electrical, fire & life safety skills. JOB SUMMARY:Farley White Management Company is looking for a licensed HVAC Engineer who will work with a team to support the management of all building systems for a Class A suburban office park located in southern NH.
At Teoresi, we specialize in supporting companies in creating projects using cutting-edge technologies such as self-driving cars and nanotechnology for the medical field. Teoresi Inc is an international Group, with offices in Europe and United States, that acts as an engineering partner to customers’ product and process development.
June 15, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.
Leidos Engineering has an opportunity for a construction project Cost and Schedule Engineer (open to all levels) with responsibility for reviewing the capital costs and construction schedules of new and existing power generation projects including wind, solar, hydro, and thermal projects as an Independent Engineer.
Employee pay is based on factors like relevant education, qualifications, certifications, experience, skills, seniority, location, performance, union contract and business needs. You will work closely with the technical lead, business development, client services and UX design teams to build intuitive and functional user interfaces.
The responsibilities of the Site Engineer II are: to contribute to the daily site operation, including creation and modification of site operating procedures, contribute to creation of change management tickets, creation of timely incident reporting, site maintenance and repairs/inspections to help ensure Digital Realty’s data center operations achieve the highest level of availability. PlatformDIGITAL®, the company’s global data center platform, provides customers with a secure data meeting place and a proven Pervasive Datacenter Architecture (PDx®) solution methodology for powering innovation and efficiently managing Data Gravity challenges.
p/>The AE candidate will need to develop a deep understanding of our clients' business, operations, and exposures to evaluate the nature, probability, and magnitude of loss potentials and build client-specific risk improvement strategies that clearly demonstrate FM's value-add. By aligning FM products and services to each client's unique needs and partnering with Account Managers to produce cohesive, client-facing deliverables, the AE will reinforce a tailored account strategy and the tangible value FM brings to each client's organization.
The responsibilities of the Site Engineer II are: to contribute to the daily site operation, including creation and modification of site operating procedures, contribute to creation of change management tickets, creation of timely incident reporting, site maintenance and repairs/inspections to help ensure Digital Realty’s data center operations achieve the highest level of availability. PlatformDIGITAL®, the company’s global data center platform, provides customers with a secure data meeting place and a proven Pervasive Datacenter Architecture (PDx®) solution methodology for powering innovation and efficiently managing Data Gravity challenges.
li>Must possess a strong understanding of asset integrity principles in complex process environments, including the reliability and integrity of critical equipment such as steam and gas turbines, electrical generators, rotating equipment, boilers, and piping systems, along with electrical systems, and how these systems, including their associated control and protection elements, interact and impact one another. Critical to the role is the ability to influence key stakeholders so they become more resilient against hazards and exposures, ultimately developing into a trusted advisor through sustainable risk improvement, strong communication skills, engineering expertise, and business acumen.
As a seed-stage B2B startup, we’re on a mission to help teams accelerate discovery, validate concepts faster and scale impact across the organization, and we believe customer obsession is our unfair advantage. This role is ideal for someone who enjoys engaging directly with customers, bringing structure to ambiguity, and translating technical capabilities into practical, business‑aligned solutions.
This role transforms marketing from a manual, channel-driven function into a scalable, AI-powered growth engine by automating execution, improving speed to market, and increasing efficiency across campaigns. The Manager, AI Marketing Orchestration will design, build, and optimize agentic marketing workflows that drive scalable growth across email, paid media, data and content.