Well rely on you to analyze engineering-design concepts of product to recommend design or test methods for attaining customer-specified operational reliability, using knowledge of reliability engineering and other technologies.

Bachelor's degree in Reliability, Electrical, Mechanical or Materials Engineering, or a related Science, Engineering or Mathematics field, plus 5 years of relevant experience or Master's degree plus 3 years relevant experience.

In the alternative, at least a master's degree or its equivalent in Mechanical Engineering, Aerospace Engineering, Automobile Engineering, Civil Engineering or related field and 3 years of experience as a Structural Engineer, Stress Engineer, FEA Analyst, Crash Safety Engineer, CAE Engineer or related role would be acceptable.

• Must possess at least a bachelor's degree or its equivalent in Mechanical Engineering, Aerospace Engineering, Automobile Engineering, Civil Engineering or related field and 5 years of progressive experience as a Structural Engineer, Stress Engineer, FEA Analyst, Crash Safety Engineer, CAE Engineer or related role.

Collaborate with a global cross-functional team to refine concepts based on input from various stakeholders such as customers, product management, sales, mold engineers, assembly engineers, quality procurement, etc.

TE Connectivitys R&DProduct Development Engineers are highly engaged team players that conceive and support the introduction of innovative connector solutions for the Industrial and Commercial Transportation ICT Segment.

Work environment may periodically expose individual to various levels of noise, grease, and dust that is typically associated with a plant; either engineering controls and/or personal protective equipment is required, to ensure exposure limit does not exceed OSHA specifications. • Work may involve exposure to a variety of substances commonly found on asphalt and plant sites such as form oil, grease, curing compounds, gasoline and diesel fuel; however, no levels above OSHA Permissible exposure limit.

Work environment may periodically expose individual to various levels of noise, grease, and dust that is typically associated with a plant, either engineering controls and/or personal protective equipment is required to ensure exposure limit does not exceed OSHA specifications. Work may involve exposure to a variety of substances commonly found on asphalt and plant sites such as form oil, grease, curing compounds, gasoline, and diesel fuel however no levels above OSHA Permissible exposure limit.

With our cultural vision, we place our core values at the heart of everything we do: safety, ambition, optimism, reliability, ownership, diversity, & respect.

Skills related to industrial process engineering (example: machine reliability, controls - program design and user interface work, IoT - process monitoring, data collection and storage, analytics, process / equipment FMEA). Toyota is proud to have 10+ different Business Partnering Groups across 100 different North American chapter locations that support team members' efforts to dream, do and grow without questioning that they belong.

By driving innovation, advancing repair technologies, and leading cross-functional projects, you will help extend component life, improve reliability, and reduce refurbishment costs. Minimum 4+ years of experience in superalloys, coatings, manufacturing processes, materials behavior, Design for Manufacturing (DfM), or hot-section gas turbine component repair.

p>As a Project Engineer at WxTite you will support the Project Manager and project team by:

• Procurement & Contracting: Assist in the solicitation, evaluation, and contracting of subcontractors to support project execution and quality delivery.

  WxTite is seeking highly motivated Project Engineers who are interested in establishing a long-term career with a growing company and are ready to work in a fast-paced environment.

Your day will include developing and qualifying repair processes, collaborating with design engineering on Design for Repair (DfR) initiatives, and driving innovation across global Siemens Energy and vendor repair shops. The successful candidate will be adept at coordinating thorough Focused Technical Reviews (FTR) with a broad range of technical experts within the global engineering community through challenging topics.

The complexity and fast paced nature of our client's needs creates a dynamic environment for our team members and fosters a culture of teamwork, diverse training opportunities, and builds a sense of ownership in the successful outcome of the project. With 21 offices throughout the Mid-Atlantic and Southeast, we provide civil engineering, environmental, economic development, GIS/geospatial technology, landscape architecture, and surveying services to a diverse client base.

p>As a DFT engineer in our mixed signal audio development team, you will be performing initial test planning, inserting memory BIST and scan, improving coverage, and delivering test patterns to our product test group.

Export control restrictions based upon applicable laws and regulations would prohibit candidates who are nationals of certain embargoed countries from working in this position without Cirrus Logic first obtaining an export license.

These engineers work closely with cross-functional teams to ensure successful integration of systems, support security and compliance requirements, and contribute to governance processes such as budgeting, procurement, and project coordination, while helping drive consistency between architectural design and field execution. Serves as the highest technical matrix resource within Support Services for activities/reviews that require support or resources from other teams including technical team, networking, security and vendor.

ECS is currently ranked #66 in Engineering News-Record's Top 500 Design Firms (April 2025), #148 in Engineering News-Record's Top 200 Environmental Firms (October 2025) and #50 in Zweig Group's Hot Firm List (May 2025). As a Geotechnical Project Manager with ECS you will support projects of varying complexity alongside a team of expert, like-minded employee-owners.

Johnson, Mirmiran & Thompson is a dynamic, 100% employee-owned consulting firm with more than 2,800 professionals, providing a full range of multidisciplinary engineering, architecture, information technology, and related services to public agencies and private clients throughout the United States. Position summary: Responsible for traffic engineering design using knowledge of general engineering principles and practices to interpret, organize, execute and coordinate assignments with limited supervision.

p>PRINCIPAL DUTIES AND RESPONSIBILITIES:

• Functions as a Professional Engineer producing sealed component designs and repairs, and acts as an internal consultant in the areas of truss component layouts, design and repairs.
• Researches and develops new products or design methods to enhance efficiencies, product quality and productivity relating to components.

This role focuses on troubleshooting tooling issues, developing tooling setups, improving tooling performance, and establishing structured tooling management systems to support operational efficiency and cost optimization. On the Drawing process side, the engineer leads tooling management initiatives supporting the transformation of cast copper shells into finished products including: Straight tubes for HVAC and plumbing.

This position reports directly to the Project Manager and provides support in project safety, documentation, plans and specifications, construction means and methods, scheduling, budgeting, projections, and project closeout. The Project Engineer oversees all engineering and technical aspects of the project, with a strong emphasis on organizing and planning, to assure the highest level of accuracy and quality.

li>Collaboration: We value collaboration and teamwork, knowing that the best solutions are born through shared knowledge and diverse perspectives.

Crowder is Building America and Proud of It as reflected in our Mission Statement: We are dedicated to superior performance and committed to making a positive difference for our clients, for our communities, and in the lives of our employees. Primary function of a Project Engineer: Assist Project Managers, Superintendents, Foremen, and other personnel in managing, scheduling, and purchasing for various types of construction projects.

E-Verify is an Internet based system operated by the Department of Homeland Security (DHS) in partnership with the Social Security Administration (SSA) that allows participating employers to electronically verify the employment eligibility of their newly hired employees in the United States. BrassCraft Manufacturing Company is a leading manufacturer and distributor of high-quality water and gas flow control products, plumbing service, and repair parts for the new construction and repair/remodel markets.

As a trusted innovation partner, our broad range of connectivity and sensor solutions enable the distribution of power, signal and data to advance next-generation transportation, energy networks, automated factories, data centers enabling artificial intelligence, and more. All legitimate job openings are posted exclusively on our official careers website at te.com/careers, and all email communications from our recruitment team will come only from actual email addresses ending in @te.com.

With our cultural vision, we place our core values at the heart of everything we do: safety, ambition, optimism, reliability, ownership, diversity, & respect.

Works directly with Manufacturing Engineers, Senior Test Engineers, Associate Test Engineers, Area Supervisors, Materials Procurement, Design Engineers, Cell Operators, equipment vendors, members of management, other NPI Engineers, and global cross functional teams Required Skills Essential Bachelor's Degree in Engineering or equivalent project leadership experience. Preferable Excellent communication skills to work with operators, peers, and management Strong electrical and mechanical aptitude Technically capable of grasping new concepts quickly Possesses sense of urgency regarding machine up-time and production demands Functions effectively as a team member in fast-paced, multi-disciplinary environment Can also lead in small team settings.

For U.S. Based jobs, please note that Rheem is unable to hire candidates to be employed in the following states: Alaska, District of Columbia, Hawaii, Idaho, Mississippi, Montana, New Mexico, North Dakota, or Vermont. Define and maintain packaging test protocols (PTP) in the qualification of packaging designs consistent with characteristics of product distribution models and Total Supply Chain (TSC) plans.

The engineer will also analyze quality trends and assess supplier quality, working collaboratively with engineering, production, and other USFC Fulfillment departments to tackle quality concerns and spearhead improvement initiatives. Success in this role demands collaboration with cross-functional teams, where strong analytical and problem-solving skills, meticulous attention to detail, and exceptional communication abilities are imperative.

Position Summary: We are seeking a highly skilled Senior Industrial Engineer to lead optimization of industrial and manufacturing processes in Server Manufacturing to improve efficiency, productivity, and safety while reducing costs. Basic Qualifications: Bachelor s or Master s degree in Industrial Engineering, Manufacturing Engineering, Mechanical Engineering or related field.

li>Support the generation, submittal & maintenance of various safety and environmental reports, as required by the Company’s local, state, and federal permits (City Industrial User, North Carolina Department of Environmental Quality & Environmental Protection Agency), which includes wastewater treatment, sampling/testing & discharge reports, underground water sampling/treatment reports, air quality reports, hazardous waste reports, etc. It will be the Vessel Engineer's responsibility to know the ASME Boiler and Pressure Vessel code, maintain and create drawing packages, create 3D CAD Layouts, work with manufacturing/assembly to optimize production and quality, and implement solutions which deliver exceptional value to our customers on budget by the scheduled date of completion.

We are looking for passionate hands-on individuals from industrial and systems engineering, manufacturing, production or distribution environments who can effectively innovate and deliver results on behalf of the customer in a fast-paced environment. Collaborate with business partners in cross functional areas such as Operations, Safety, Quality, Loss Prevention, Engineering, Information Technology, and Finance in support of Supply Chain initiatives.

As instrumental members of our Manufacturing Team, the Manufacturing Engineers are expected to work collaboratively with leadership, operations, employees, and other functional areas, to promote a productive and amicable work environment.

The mechanical engineer will be responsible for developing, design new equipment and troubleshooting, enhance existing machinery, maintaining drawings and documentation. The Mechanical Engineer working side by side with the Production and Maintenance team will be the subject matter expert of Site Technology for assigned shop floor areas.

This pivotal role involves supervising repair operations at our service facility, mentoring technicians, and collaborating with our Midwest Service Center to optimize repair workloads. The ideal candidate possesses a strong mechanical or electromechanical background, is proficient in rolling element bearing applications, and can analyze component failures.