462 Results for

Component Engineer Jobs in Orlando, FL

Jobs

Systems Integration Test Engineer (2nd/3rd Shift) CACI International Inc

Orlando, FL

$71,500–$150,200 / year

Pay Range: There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. Job Title: Systems Integration Test Engineer (2nd/3rd Shift) Job Category: Engineering Time Type: Full time Minimum Clearance Required to Start: None Employee Type: Regular Percentage of Travel Required: Up to 10% Type of Travel: Continental US.

30+ days ago

Licensed Electrical Engineer Freese and Nichols, Inc.

Orlando, FL

As an Electrical Engineer, you will design and deliver electrical systems for water and wastewater systems for municipal, federal and private-sector projects while supporting project design and construction delivery, quality control, and the development of junior engineers. For more than 130 years, we have been planning and designing the infrastructure our communities need: developing water supplies, designing roadways and bridges, preparing for natural disasters, and much more.

30+ days ago

Electrical Engineer - Power System Protection Black & Veatch Holding Co

Orlando, FL

The ideal candidate has significant working experience and knowledge of Protection & Control (P&C) design concepts, relay setting calculations / setting file development, relay manufacturer software platforms, and power system analysis & modeling software. Recognized by Glassdoor as a 2023 Top 100 place to work, Black & Veatch allows you to lend your talent and perspective to humanitys biggest challenges in a flexible environment where you are empowered to grow and explore new possibilities.

30+ days ago

ESSP Electrical Engineer - Experience Professional WSP Global Inc

Orlando, FL

Power System Planning Studies: steady-state real and reactive power flow including outage contingencies, generation interconnect feasibility, P-V and Q-V analysis for voltage stability margins, dynamic stability performance, automation of large batch simulations, working with models from NERC regional entities (WECC, MRO, SERC etc.), NERC compliance. Design Studies: substation grounding, corona, electric and magnetic fields, insulation coordination (lightning, switching surge, and contamination performance), transient (time domain) simulation, power quality (harmonics, voltage flicker, over/under voltage, etc.), motor starting, AC interference (transmission line interaction with railroads and pipelines).

17 days ago

Overhead Transmission Line Structural Engineer Black & Veatch Holding Co

Written Communications, Drive For Results, Priority Setting, Planning, Delegation, Directing Others, Conflict Management, Informing, Listening, Dealing with Ambiguity, And Building Effective Teams. Is responsible for one or more of the following: overseeing collection, assimilation, and management of data for engineering work; leading smaller production teams; and serving as the responsible charge for a project.

30+ days ago

Senior Associate, Mechanical Packaging Engineer L3Harris Technologies Inc

Orlando, FL

Support production, manufacturing, and integration activities through investigation and troubleshooting of engineering change requests (ECRs), build issues, and non-conformance concerns, while working with cross-functional teams to help identify solutions. Electro-mechanical equipment includes ruggedized enclosed electronic equipment, cables, printed wire boards (PWBs), circuit card assemblies (CCAs), mechanical components, and support equipment.

30+ days ago

Electrical Engineer Kratos Defense & Security Solutions Inc

Orlando, FL

customFieldsAll":[{"abbrFname":"Trav","fvalue":"Domestic","custid":2105,"fname":"Travel Requirement"},{"abbrFname":"Comp","fvalue":"","custid":2116,"fname":"Compensation"},{"abbrFname":"CAP","fvalue":"Space","custid":2182,"fname":"Capabilities"}],"bugroupname":"","reqexp":"","travel":10,"jid":368695,"jobduration":"","zipcode":32832,"job_title":" Electrical Engineer","customFields":[{"abbrFname":"Trav","fvalue":"Domestic","custid":2105,"fname":"Travel Requirement"},{"abbrFname":"Comp","fvalue":"","custid":2116,"fname":"Compensation"},{"abbrFname":"CAP","fvalue":"Space","custid":2182,"fname":"Capabilities"}],"BusinessUnitName":"KSTC","jobcurrency":"USD","jobtype":"Full-Time/Regular","city":"Orlando","joblevel":4,"companyname":"Kratos Defense","salarytype":0,"jobdescription":". Develops, reviews, and maintains comprehensive electrical design documentation, including detailed schematics, wiring diagrams, panel schedules, cable tray layouts, equipment specifications, bills of materials, and calculations using CAD and electrical design software (e.g., AutoCAD Electrical, Solidworks) rn.

30+ days ago

Turbine Design Engineer - Components Manufacturing Siemens Energy AG

Orlando, FL

Expertise in gas turbine manufacturing processes including investment casting and conventional and non-conventional machining and experience in disposition of non-conforming high-temperature turbine hardware combined with strong motivation, safety awareness and efficient task execution. With ~100.000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably.

30+ days ago

Electrical Engineer Kratos Defense

Orlando, FL

Develops, reviews, and maintains comprehensive electrical design documentation, including detailed schematics, wiring diagrams, panel schedules, cable tray layouts, equipment specifications, bills of materials, and calculations using CAD and electrical design software (e.g., AutoCAD Electrical, Solidworks). Kratos is valued for our ability to design and deliver leading edge, resilient solutions for aerospace communication, control, awareness and mission success across a continuum of offeringsfrom commercial to tailored custom solutions and integrated programs.

30+ days ago

Electrical Engineer Actalent Inc

Edgewater, FL

$45–$55 / hour

The Electrical Engineer II defines and designs electrical systems, panels, and wiring harnesses, and works closely with cross-functional design teams to translate project requirements into robust, compliant, and manufacturable solutions. Work involves close collaboration with engineering, propulsion, manufacturing, and customer service teams, with frequent hands-on interaction with electrical panels, wiring harnesses, and prototype systems.

7 days ago

Lead Electrical Engineer Siemens Energy AG

Orlando, FL

Tasks include collaboration with customers, vendors, various engineering disciplines, bid management and supply chain management to develop and implement technical solutions ensuring the highest customer satisfaction and successful project implementation by Siemens Energy. Flexibility and willingness to be present for limited periods (approximately 10% travel) on project sites, and support meetings with customers and other third-party companies around the globe, per project needs.

30+ days ago

Mechanical Design Engineer - Components Siemens Energy AG

Orlando, FL

In this fast-paced role, you'll drive new product introductions and tackle complex manufacturing challenges head-on, helping bring advanced industrial gas turbine components to life with precision, efficiency, and impact. Design with manufacturability in mind: Champion Design for Manufacturing (DFM) by shaping product definitions and collaborating closely across design and production teams to optimize outcomes.

30+ days ago

Diode Ventures - Electrical Engineer Black & Veatch Holding Co

Orlando, FL

Diode Ventures is a wholly owned subsidiary company of Black & Veatch that provides turnkey, end-to-end solutions for industrial, commercial and technology interests, including data centers and green energy solutions. You'll work alongside teams solving complex challenges and turning ideas into solutions that perform in the real world-gaining hands-on experience across projects, technologies, and disciplines.

30+ days ago

Lead Underground Transmission Line Engineer 2 - Grid Sargent & Lundy

Lake Mary, Florida

$134,546–$205,557 / year
Full time

AI & Automation at Sargent & Lundy: In this role, we expect people to be willing or able to lead others who use modern tools: You are expected to lead others in taking engineering problems from issue to solution by setting expectations for using data and modern tools such as automation and AI to improve workflows, reduce rework, and deliver cost-effective designs. Leaders in these roles often direct automation and process-improvement work, for example, how teams automate calculations, summarize technical documents, or generate design documentation and guiding when and how AI or agentic AI tools are used while ensuring results are checked.

30+ days ago

Piping Project Engineer Actalent Inc

Lake Mary, FL

Remote

$40–$60 / hour

This role interprets and responds to technical inquiries from customers, vendors, and field personnel, integrates and improves design requirements from a parent company, and supports the full project lifecycle from specification development and procurement through execution and warranty. The team works on gas and steam turbine power projects across North and South America, providing a collaborative setting with frequent interaction among different engineering disciplines and project stakeholders.

11 days ago

RF Filter Design Engineer Visium Resources, Inc.

Orlando, FL

Leads project teams in a fast-paced team environment to deliver new products to customers on time, meeting or exceeding all requirements and resulting in profitable products when transitioned to production. Apply technical principles of engineering and electronics and utilize RF synthesis and simulation software packages to design, simulate and prototype new products with emphasis in RF filters.

30 days ago

Mechanical Design Engineer - Turbine Components Siemens Energy AG

Orlando, FL

Disposition of non-conforming gas turbine or other hardware operating in high temperature environment SAP, Teamcenter, Lotus Notes, or other quality data management software highly preferred Applicants must be legally authorized for employment in the United States without need for current or future employer-sponsored work authorization. About The Team: You are working in a team of mechanical and materials engineers covering all process steps of gas turbine hot gas path component manufacturing together with design engineering and supply chain management at internal and external global suppliers.

30+ days ago

Electrical Engineer FourFront Design of Montana

Orlando, FL

$86,000–$110,000 / year

A shared goal in being deeply committed to where we live, work and play connects us all – and it makes us proud to be a Certified Woman-Owned Service-Disabled Veteran Owned Small Business. For information on FourFront Design Inc., including more information on projects, services, and our company culture, visit our website at https://www.fourfrontdesign.com/.

30+ days ago

Senior Electrical Engineer - Security Clearance Eligibility Required AVT Simulation

Orlando, FL

Full time

Job Summary : As a Senior Electrical Engineer at AVT Simulation, you will be responsible for the design, development, and integration of electrical systems and components for our advanced training simulators in the AET Program. You will collaborate closely with a multidisciplinary team of engineers and subject matter experts to create innovative solutions that meet customer requirements and drive the success of our training systems.

18 days ago

electrical-engineer-power-kansas-city Burns & McDonnell

Orlando, FL

$110,000–$175,000 / year

Equipment includes rotating machines, such as generators and motors, solar photovoltaic panels, inverters, energy storage systems, such as batteries, large power transformers, generator circuit breakers, isolated phase bus duct, non-segregated phase bus duct, switchgear, motor control centers, small power transformers, variable frequency drives, station batteries, and UPS systems. Bachelor's degree in Electrical Engineering or related degree from an ABET-accredited program and 3 years of electrical engineering experience, consulting preferred required.

30+ days ago

Senior Electrical Engineer MicroVision

Orlando, Florida

With our solid-state lidar technologies, encompassing FMCW and MEMS-based long-range lidar and flash-based short-range lidar, integrated with our onboard perception software, MicroVision possesses the expertise to deliver safe mobility at the speed of life. As a key member of MicroVision’s Hardware Design Engineering team, you will collaborate with various technical teams in the company to design and take into production market defining Automotive LiDAR products.

30+ days ago

Electrical Engineer - Power (Multiple Locations) Burns & McDonnell

Orlando, FL

$105,000–$170,000 / year

Equipment includes rotating machines, such as generators and motors, solar photovoltaic panels, inverters, energy storage systems, such as batteries, large power transformers, generator circuit breakers, isolated phase bus duct, non‑segregated phase bus duct, switchgear, motor control centers, small power transformers, variable frequency drives, station batteries, and UPS systems. Apply strong knowledge of commonly used electrical engineering/design concepts, principles, practices, codes, and procedures within the electrical engineering services industry.

5 days ago

Electrical Engineer Harrison Consulting Solutions

Orlando, Florida

Oversee electrical design execution for a variety of project types (Healthcare, Sports, Commercial, Public Sector, Industrial, Education, and/or Institutional projects. Supervise staff/perform following duties: Perform analysis, design and documentation for power distribution, lighting systems and backup power systems.

30+ days ago

Protection Engineer - Senior Professional WSP in the U.S.

Orlando, FL

Required Qualifications Bachelor's degree in Electrical Engineering (ABET accredited).5 to 7 years of relevant post education experience as an electrical engineer executing deliverables for Protective Relaying projects in power generation, transmission, and distribution at a utility or industrial scale. Compensation Expected Salary (New York Only): $94,300k a yr- $155,500k a yrWSP USA is providing the compensation range that the company in good faith believes it might pay and offer for this position, based on the successful applicant's education, experience, knowledge, skills, abilities in addition to internal equity and specific geographic location.

4 days ago

Senior Software Engineer/Engineer II 4C North America

Orlando, Florida

You'll drive technical design within an agile team, own features and components end to end, and help shape the direction of our platform — including how we build and integrate AI-driven and agentic capabilities into our simulation and training solutions. Strong experience with Java/Jakarta EE technologies such as the Servlet API, JPA, JMS, JAX-RS, JAX-WS, WebSocket API, the Spring Framework, and servlet containers (Tomcat/Jetty).

17 days ago

Controls Engineer Startup Talents

Orlando, Florida

Perform the following system design calculations/analysis: Short circuit protection, harmonics, noise reduction / cancellation, power consumption, load flow, short circuit protection, protective relay / circuit design, ground fault monitoring, safety system implementation (SIL/PL rating knowledge is preferred). - Managerial experience: 3+ years of technical leadership or mentorship experience within controls engineering projects; experience guiding junior engineers or technicians; demonstrated ability to lead project teams without formal managerial title.

30+ days ago

Systems Engineer- VL-60-Security Clearance Eligibility Required AVT Simulation

Orlando, FL

Full time

Completion of a full course of study in an accredited college or university leading to a Bachelor’s or higher degree in Engineering (e.g., Systems, Mechanical, Electrical, Aerospace) or a relevant technical field. While performing the duties of this job, the employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; talk or hear.

30+ days ago

Building Engineer IV Marriott International Inc

Orlando, FL

Display professional journeyman level expertise in at least three of the following areas with basic skills in the remaining: air conditioning and refrigeration, electrical, plumbing, carpentry and finish skills, mechanical, general building management, pneumatic/electronic systems and controls, and/or energy conservation. Display advanced knowledge of engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs.

15 days ago

Controls Engineer Wunderlich-Malec Careers

Orlando, Florida

Able to perform the following system design calculations/analysis: Short circuit protection, harmonics, noise reduction / cancellation, power consumption, load flow, short circuit protection, protective relay / circuit design, ground fault monitoring, safety system implementation (SIL/PL rating knowledge is preferred). Ability to perform processor loading calculations, scan time analysis, input/output response timing analysis, control system network delays analysis, and program task/code block priorities/timing management/interface.

22 days ago

Systems Integration Test Engineer (2nd/3rd Shift) CACI

Orlando, Florida

Pay Range : There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. As a valued team member, you’ll be part of a high-performing group dedicated to our customer’s missions and driven by a higher purpose – to ensure the safety of our nation.

30+ days ago

Senior Mechanical Engineer Startup Talents

Orlando, Florida

7–10+ years of senior-level mechanical engineering experience with proven ability to lead design projects from scratch or major modifications (from concept to execution), including major redesigns or new system development (50%+ redesign). This is a great opportunity to join a 100% employee-owned ESOP and one of the largest and most well-established engineering companies in the United States skilled at electrical design, control system manufacturing, process integration, programming, testing, training, and ongoing support.

30+ days ago

Mechanical Engineer Nenni and Associates

Orlando, Florida

Job Duties and Responsibilities: Collaborate and mentor junior engineers to design the mechanical and plumbing components of energy-efficient buildings. Our client is a very well-established ESCO who is currently seeking a Senior Mechanical Engineer to join their team within the Orlando market!

30+ days ago

Sr. Mechanical Engineer Oshkosh Corp.

Orlando, FL

$73,200–$117,800 / year

However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with Oshkosh Corporation's legal duty to furnish information. Oshkosh AeroTech is a leading provider of aviation ground support products, gate equipment and airport services to commercial airlines, airports, air-freight carriers, ground handling and military customers.

8 days ago

Marine & Industrial Applications Sales Engineer Florida Detroit Diesel Allison

Orlando, Florida

Act as customer interface with responsibility to increase sales by providing engineering and design support for key customers, working with customers and Original Equipment Manufacturer (OEM) vendors through the full sales cycle. Responsibilities: • Facilitate the closure of new and existing business by providing design and engineering support for all aspects of OEM programs including product design, process design, competitive analysis, quotations, and project management of subcontractors and vendors.

30+ days ago

Electrical VDC/BIM Engineer Tri-City Electrical Contractors Inc

Altamonte Springs, FL

REQUIRED EDUCATION AND EXPERIENCE: Minimum one (1) year of related previous experience Proficient in VDC systems using Revit and Navisworks Strong computer skills, including but not limited to Microsoft Office products (Bluebeam, Access, Excel, Word, PowerPoint, and Outlook) Ability to understand architectural and structural drawings High School Diploma or GED Ability to read, write, and communicate in English at a minimum 12th-grade level. PREFERRED EDUCATION AND EXPERIENCE: Bilingual Electrical background Experience as a commercial electrician Graduate from a college or university with an Associate Degree in Computer Aided Drafting Technology (or equivalent).

25 days ago

Lead, Electrical Interconnect Engineer (Cable & Harness Design) L3Harris Technologies Inc

Orlando, FL

Essential Functions: Lead the architecture, design, review, integration, and support of cable harness assemblies and interconnect solutions for complex flight hardware, lab assets, and ground support equipment using electrical schematic capture and harness design tools such as Capital Harness, Xpedition, or PADS. This role is intended for a senior technical leader who can independently identify, prioritize, and execute the department's cable and interconnect work with minimal day-to-day oversight while providing direction and technical mentorship to other engineers.

24 days ago

Senior Substation Structural Engineer Black & Veatch Holding Co

Orlando, FL

$148,852–$248,578 / year

Our Technology, Commercial & Industrial Team has specialized capabilities focused on the latest needs for clients in a fast-growth technology-led arena of advanced manufacturing, and generative AI computing including gigafactories, bio/ag tech, data centers and distributed infrastructure. Knowledge Sharing, Innovation and Technology: Serves as a technical specialist and has knowledge and skill set to provide consultation and guidance to project teams in a particular practice area.

30+ days ago

Lead Power Systems Controls Engineer Eaton Corporation

Orlando, FL

$97,000–$143,000 / year

What you'll do: Create, modify, test, and deploy software for Programmable Logic Controllers (PLC's), Data concentrators, Multi-function Protection Relays, Generator Controllers, and Human Machine Interfaces (HMI's) for Automatic Power Transfer applications (Main-Tie-Main, Main-Gen, Main-Tie-Main-Gen, Generator Paralleling Switchgear etc.). Qualifications: Required Qualifications: Bachelor's degree in Engineering from an accredited institution with a minimum 7 years of power distribution controls experience OR Master's degree in Engineering with at least 5 years of power distribution controls experience OR a minimum 10 years of power distribution controls experience.

3 days ago

Electrical Project Engineer - Substation Design and Power Electronics (STATCOM/FACTS/HVDC) Black & Veatch Holding Co

Orlando, FL

Our Technology, Commercial & Industrial Team has specialized capabilities focused on the latest needs for clients in a fast-growth technology-led arena of advanced manufacturing, and generative AI computing including gigafactories, bio/ag tech, data centers and distributed infrastructure. Our specialized team provides complete engineering, procurement, and construction new asset and operating asset services in the following areas: Substations.

30+ days ago

Electrical Engineer-Digitalization Siemens Energy AG

Orlando, FL

The Electrical Systems engineering team is responsible for the specification, selection, design review, cost calculation and quality control, for simple and combined cycle power plant equipment including, but not limited to: Power Control Centers, Static Excitation Systems, Static Frequency Converters, Protective Relaying Systems, Low Voltage Power Distribution Systems. Conduct electrical engineering initiatives in international projects focused on the digitalization of Gas and Steam Turbine Power Plants using COMOS as the primary digitalization platform for the automated generation of document deliverables.

30+ days ago

Electrical Engineer - PE Trilon Group

Sanford, FL

$85,000–$145,000 / year

Oversee work of Electrical Designers, including drawings such as single-line diagrams, panel schedules, power plans, lighting plans, and installation details. This role focuses on providing innovative solutions to engineering challenges while supervising and executing a variety of projects to meet client requirements.

3 days ago

Electrical Engineer - PE CPH Consulting LLC

Sanford, FL

$85,000–$145,000 / year

3 days ago

Mechanical Engineer Autonomi Robotics

Orlando, FL

Strong CAD proficiency — SolidWorks, CATIA, or equivalent — with a structured, well-managed approach to assemblies and drawings. Collaborate closely with software and electrical teams to ensure mechanical designs accommodate routing, sensors, and integration requirements.

30+ days ago

Electrical Engineer-Electrical Team Lead Siemens Energy AG

Orlando, FL

The Electrical Systems engineering team is responsible for the specification, selection, design review, cost calculation and quality control, for simple and combined cycle power plant equipment including, but not limited to: Power Control Centers, Static Excitation Systems, tic Frequency Converters, Protective Relaying Systems, Low Voltage Plant Power Distribution Systems. Tasks include collaboration with customers, vendors, various engineering disciplines, bid management and supply chain management to develop and implement technical solutions ensuring the highest customer satisfaction and successful project implementation by Siemens Energy.

30+ days ago

Associate Electrical Engineer - Power System Protection Black & Veatch Holding Co

Orlando, FL

The ideal candidate has a good understanding of Protection & Control (P&C) design concepts, familiarity with relay settings calculations / setting file development, relay manufacturer software platforms, adn familiarity with power system analysis & modeling software. We put them at the center of everything we do and empower them to grow, explore new possibilities and use their diverse talents and perspectives to solve humanitys biggest challenges in an ever-evolving world.

30+ days ago

Associate Electrical Engineer - Substation Black & Veatch Holding Co

Orlando, FL

Our Technology, Commercial & Industrial Team has specialized capabilities focused on the latest needs for clients in a fast-growth technology-led arena of advanced manufacturing, and generative AI computing including gigafactories, bio/ag tech, data centers and distributed infrastructure. Develop protection and control design deliverables including protective relays, panel arrangements, one line/single line diagrams, three line diagrams, AC/DC schematics, relay panel wiring and equipment wiring within high voltage substation designs.

30+ days ago

Electrical Engineer- II Siemens Energy AG

Orlando, FL

The Electrical Design Engineer will be responsible for designing, developing, and analyzing voltage regulators, transformers, and their subcomponent assemblies using appropriate engineering principles. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably.

30+ days ago

Electrical Engineer The Perillo Group

Winter Park, FL

The ideal candidate will be responsible for designing, developing, and testing electrical systems and equipment. We are seeking a talented and experienced Electrical Engineer to join our team in Orlando.

9 days ago

Electrical Engineer - PE CPH

Sanford, Florida

$85,000–$145,000 / year

4 days ago

Cyber Systems Engineer (Engineer or Principal Engineer Level) Northrop Grumman Corp

$79,300–$118,900 / year

At a Principal Engineer Level: Must have a Bachelors of Science degree in a STEM field and at least 5 years of relevant military / professional experience, OR a Master's Degree in a STEM field and at least 3 years of relevant military / professional experience, OR a PhD and at least 1 year of relevant military / professional / academic experience. Prepare technical documents, provide briefings, attend security-related working groups, support ongoing authorization efforts including development of supporting documentation, develop procedures, and work in a fast-changing dynamic environment with minimal direction.

22 days ago

Stand out to leading employers.

Upload your resume and let employers find you for new Component Engineer job openings. Plus, receive relevant job matches delivered straight to your inbox.

Create A Free Account

Component Engineer Jobs in Orlando, FL

Systems Integration Test Engineer (2nd/3rd Shift) CACI International Inc

Licensed Electrical Engineer Freese and Nichols, Inc.

Electrical Engineer - Power System Protection Black & Veatch Holding Co

ESSP Electrical Engineer - Experience Professional WSP Global Inc

Overhead Transmission Line Structural Engineer Black & Veatch Holding Co

Senior Associate, Mechanical Packaging Engineer L3Harris Technologies Inc

Electrical Engineer Kratos Defense & Security Solutions Inc

Turbine Design Engineer - Components Manufacturing Siemens Energy AG

Electrical Engineer Kratos Defense

Electrical Engineer Actalent Inc

Lead Electrical Engineer Siemens Energy AG

Mechanical Design Engineer - Components Siemens Energy AG

Diode Ventures - Electrical Engineer Black & Veatch Holding Co

Lead Underground Transmission Line Engineer 2 - Grid Sargent & Lundy

Piping Project Engineer Actalent Inc

RF Filter Design Engineer Visium Resources, Inc.

Mechanical Design Engineer - Turbine Components Siemens Energy AG

Electrical Engineer FourFront Design of Montana

Senior Electrical Engineer - Security Clearance Eligibility Required AVT Simulation

electrical-engineer-power-kansas-city Burns & McDonnell

Senior Electrical Engineer MicroVision

Electrical Engineer - Power (Multiple Locations) Burns & McDonnell

Electrical Engineer Harrison Consulting Solutions

Protection Engineer - Senior Professional WSP in the U.S.

Senior Software Engineer/Engineer II 4C North America

Controls Engineer Startup Talents

Systems Engineer- VL-60-Security Clearance Eligibility Required AVT Simulation

Building Engineer IV Marriott International Inc

Controls Engineer Wunderlich-Malec Careers

Systems Integration Test Engineer (2nd/3rd Shift) CACI

Senior Mechanical Engineer Startup Talents

Mechanical Engineer Nenni and Associates

Sr. Mechanical Engineer Oshkosh Corp.

Marine & Industrial Applications Sales Engineer Florida Detroit Diesel Allison

Electrical VDC/BIM Engineer Tri-City Electrical Contractors Inc

Lead, Electrical Interconnect Engineer (Cable & Harness Design) L3Harris Technologies Inc

Senior Substation Structural Engineer Black & Veatch Holding Co

Lead Power Systems Controls Engineer Eaton Corporation

Electrical Project Engineer - Substation Design and Power Electronics (STATCOM/FACTS/HVDC) Black & Veatch Holding Co

Electrical Engineer-Digitalization Siemens Energy AG

Electrical Engineer - PE Trilon Group

Electrical Engineer - PE CPH Consulting LLC

Mechanical Engineer Autonomi Robotics

Electrical Engineer-Electrical Team Lead Siemens Energy AG

Associate Electrical Engineer - Power System Protection Black & Veatch Holding Co

Associate Electrical Engineer - Substation Black & Veatch Holding Co

Electrical Engineer- II Siemens Energy AG

Electrical Engineer The Perillo Group

Electrical Engineer - PE CPH

Cyber Systems Engineer (Engineer or Principal Engineer Level) Northrop Grumman Corp

Similar Job Searches