NewD489 Construction Support Component Engineer (Senior / Specialist) General Dynamics Electric BoatD489 Construction Support Component Engineer (Senior / Specialist)Groton, ConnecticutFull timeThe selected candidate will provide design and deck plate support for main propulsion system (MPS) equipment (e.g., main propulsion controls and ACC subcomponent, main propulsion motor drives, and main propulsion switchboards) during follow-on motor module construction. D489 CLB Propulsion Engineering is seeking experienced candidates to support construction of Motor Modules and periodic support of test programs of production and pre-production IPS components in the Philadelphia Navy Yard.
NewSenior Electrical Engineer (Transportation/Transit - Lighting & Facility Power) Garg Consulting Services, Inc.Senior Electrical Engineer (Transportation/Transit - Lighting & Facility Power)Rocky Hill, CT$140,000–$200,000 / yearFull timeSenior Electrical Engineer (Transportation/Transit - Lighting & Facility Power)Rocky Hill, CT or Princeton, NJ Full-Time | On-Site$140,000 – $200,000 + Signing Bonus + Yearly Bonus + BenefitsAbout Garg Consulting Services, Inc. We are seeking a highly experienced Senior Electrical Engineer (P.E.) to support complex electrical engineering design efforts and support large-scale transportation and infrastructure programs.
Project Management Sr Consultant (Electrical Engineer) CBRE Group IncProject Management Sr Consultant (Electrical Engineer)East Hartford, CTProject Management Consultant (Electrical Engineer), you will provide professional electrical engineering and project management experience on designated projects and assignments for the East Hartford or Middletown campus and facilities. Monitor and coordinate the execution of the various services and process projects including capital improvements, physical plant and infrastructure upgrades, equipment relocations/installations, maintenance, and repair work.
Electrical Design Engineer Whelen Engineering Co IncElectrical Design EngineerChester, CTDescription: Duties and ResponsibilitiesGeneral and specialized circuit and system designAnalysis of general and specialized components circuits signals and systemsCircuit simulation using SPICE modelingSchematic capture using Altium DesignerHardware and system development and integrationHardware troubleshooting and analysisEmbedded firmware development primarily in embedded CC programming languages using various IDEs IAR Embedded Workbench Visual Studio Code etc. Must be proficient in knowledge and design of common electronic circuits including but not limited to transistor and FET amplifiers solid-state switches biasing circuits bridges rectifiers filters digital and analog IO circuits current sources and linear and switching regulators.
Electrical Software Shipboard Cybersecurity Engineer General Dynamics CorpElectrical Software Shipboard Cybersecurity EngineerGroton, CTControl System Security Engineers on our team typically perform the following types of work: Control system security analysis and design implementation, including the development of component specific requirements, working in close collaboration with component engineers. Design, implementation, operation and maintenance of sensitive unclassified and classified computing systems in accordance with appropriate Naval Reactors and Defense Counterintelligence Security Agency (DCSA) security policies.
NewElectrical Engineer - Dept 427 General Dynamics Electric BoatElectrical Engineer - Dept 427Groton, ConnecticutFull timeOverview: Propulsion Plant Electrical (D427) performs design engineering activities for electrical components and systems used in the propulsion plant for VIRGINIA Class submarines in construction at the Electric Boat shipyard and technology insertions for future VIRGINIA Class blocks of ships (e.g. Major components supported by this group are power electronic inverters and converters, power distribution switchboards and circuit breakers, microprocessor based instrumentation and control equipment, electromagnetic controllers, transformers, bus transfer devices and control stations.
Communications Systems Test Engineer: Senior/Specialist/Principal Ship Control General Dynamics CorpCommunications Systems Test Engineer: Senior/Specialist/Principal Ship ControlGroton, CTThe selected candidate will be part of a high-performing, detail-oriented team that fulfills engineering tasks related to initial hardware production, shipboard installation, test, delivery, and at-sea testing of Ship Control components. Ship Control develops in-house electronic systems and integrates vendor/government supplied equipment to support the VA/CLB Ship Control System (SCS), VA/CLB Monitoring Systems, and the VA/CLB Portable Ship Control Systems (PSCS).
Communications Systems Test Engineer: Senior/Specialist/Principal– Ship Control General Dynamics Electric BoatCommunications Systems Test Engineer: Senior/Specialist/Principal– Ship ControlGroton, ConnecticutFull timeOverview: Ship Control develops in-house electronic systems and integrates vendor/government supplied equipment to support the VA/CLB Ship Control System (SCS), VA/CLB Monitoring Systems, and the VA/CLB Portable Ship Control Systems (PSCS). The selected candidate will be part of a high-performing, detail-oriented team that fulfills engineering tasks related to initial hardware production, shipboard installation, test, delivery, and at-sea testing of Ship Control components.
Engineer I/II - D425 Hull, Mechanical & Electrical Systems General Dynamics CorpEngineer I/II - D425 Hull, Mechanical & Electrical SystemsGroton, CTAs a software engineer supporting HM&E systems, youll be part of an engineering team that designs, develops, integrates, and tests shipboard software for multiple submarine platforms. General Dynamics Electric Boat is a recognized leader in the design, construction and lifecycle support of submarines for the United States Navy.
NewElectrical Systems Engineer General Dynamics Electric BoatElectrical Systems EngineerGroton, ConnecticutFull timeResponsibilities: Candidates best suited for this position will possess a passion for learning, teamwork, and being taught in the principles of electrical control systems, current control, and electric drives while assisting in the management of suppliers to deliver requirement compliant components for validation and use in the ship test program. Overview: The Integrated Power Systems Advanced Current Compensation team in (Department 489) supports new technology development for the electric drive propulsion control system.
Engineer - Systems General Dynamics CorpEngineer - SystemsGroton, CTOpportunities are available for Electrical, Mechanical and other engineers within D465, the Electrical Components Department, to develop various engineered components for submarine applications working with other Electric Boat, Navy, and outside supplier personnel. Supporting development of associated technical documentation including: technical manuals operating instructions, ship system manuals, test forms, repair parts lists, procurement specifications, etc.
Integrated Power Systems Labs & Advanced Technology Engineer Electric Boat CorpIntegrated Power Systems Labs & Advanced Technology EngineerNew London, CTThe Integrated Power Systems (IPS) Labs, Emulators and Advanced Technology team has exciting opportunities for engineers to work on some of the various projects currently underway within the department: Control Software Test Bed (CSTB): Engineers working on the CSTB project will be involved with the design, build, test and troubleshooting of a brand-new test platform for the all-electric COLUMBIA Main Propulsion System. In addition, engineers will be expected to work on any and all aspects of the build of this laboratory including but not limited to, facilities upgrades, managing project schedules, analyzing test data, writing test reports, mechanical design and build of control cabinetry, and inventory management.
Integrated Power Systems Labs & Advanced Technology Experienced Engineer Electric Boat CorpIntegrated Power Systems Labs & Advanced Technology Experienced EngineerNew London, CTThe Integrated Power Systems (IPS) Labs, Emulators and Advanced Technology team has exciting opportunities for engineers to work on some of the various projects currently underway within the department: Control Software Test Bed (CSTB): Engineers working on the CSTB project will be involved with the design, build, test and troubleshooting of a brand-new test platform for the all-electric COLUMBIA Main Propulsion System. In addition, engineers will be expected to work on any and all aspects of the build of this laboratory including but not limited to, facilities upgrades, managing project schedules, analyzing test data, writing test reports, mechanical design and build of control cabinetry, and inventory management.
NewIntegrated Power Systems Labs & Advanced Technology Engineer General Dynamics Electric BoatIntegrated Power Systems Labs & Advanced Technology EngineerGroton, ConnecticutFull timeIn addition, engineers will be expected to work on any and all aspects of the build of this laboratory including but not limited to, facilities upgrades, managing project schedules, analyzing test data, writing test reports, mechanical design and build of control cabinetry, and inventory management. Independent Research and Development (IRAD): Engineers working on our IRAD project will have the opportunity to explore new designs and techniques in order to help deliver the next-generation of electric propulsion motor drives.
NewIntegrated Power Systems Labs & Advanced Technology Experienced Engineer General Dynamics Electric BoatIntegrated Power Systems Labs & Advanced Technology Experienced EngineerGroton, ConnecticutFull timeIn addition, engineers will be expected to work on any and all aspects of the build of this laboratory including but not limited to, facilities upgrades, managing project schedules, analyzing test data, writing test reports, mechanical design and build of control cabinetry, and inventory management. Independent Research and Development (IRAD): Engineers working on our IRAD project will have the opportunity to explore new designs and techniques in order to help deliver the next-generation of electric propulsion motor drives.
Integrated Power Systems Labs & Advanced Technology Experienced Engineer General Dynamics CorpIntegrated Power Systems Labs & Advanced Technology Experienced EngineerGroton, CTThe Integrated Power Systems (IPS) Labs, Emulators and Advanced Technology team has exciting opportunities for engineers to work on some of the various projects currently underway within the department: Control Software Test Bed (CSTB): Engineers working on the CSTB project will be involved with the design, build, test and troubleshooting of a brand-new test platform for the all-electric COLUMBIA Main Propulsion System. In addition, engineers will be expected to work on any and all aspects of the build of this laboratory including but not limited to, facilities upgrades, managing project schedules, analyzing test data, writing test reports, mechanical design and build of control cabinetry, and inventory management.
Integrated Power Systems Labs & Advanced Technology Engineer General Dynamics CorpIntegrated Power Systems Labs & Advanced Technology EngineerGroton, CTThe Integrated Power Systems (IPS) Labs, Emulators and Advanced Technology team has exciting opportunities for engineers to work on some of the various projects currently underway within the department: Control Software Test Bed (CSTB): Engineers working on the CSTB project will be involved with the design, build, test and troubleshooting of a brand-new test platform for the all-electric COLUMBIA Main Propulsion System. In addition, engineers will be expected to work on any and all aspects of the build of this laboratory including but not limited to, facilities upgrades, managing project schedules, analyzing test data, writing test reports, mechanical design and build of control cabinetry, and inventory management.
Engineer VI Electrical - Nuclear Zachry Holdings, IncEngineer VI Electrical - NuclearStonington, CTAbility to perform walk downs of equipment in an industrial plant environment, to include climbing ladders, accessing security-controlled areas, and entering confined spaces and controlled hazardous areas is required. Typical activities include developing specifications and/or modification packages, defining design scope, developing design criteria documents, identifying, and selecting equipment and instruments, and developing system functionality.
NewEngineer I/II - D425 Hull, Mechanical & Electrical Systems General Dynamics Electric BoatEngineer I/II - D425 Hull, Mechanical & Electrical SystemsGroton, ConnecticutFull timeAs a software engineer supporting HM&E systems, you’ll be part of an engineering team that designs, develops, integrates, and tests shipboard software for multiple submarine platforms. End-to-end Experience in requirements analysis and hardware/software design, software code and unit test, hardware/software integration, and software test.
Engineer I/II D425 Hull, Mechanical & Electrical Systems Electric Boat CorpEngineer I/II D425 Hull, Mechanical & Electrical SystemsGroton, CTAs a software engineer supporting HM&E systems, youll be part of an engineering team that designs, develops, integrates, and tests shipboard software for multiple submarine platforms. End-to-end Experience in requirements analysis and hardware/software design, software code and unit test, hardware/software integration, and software test.
Lead Engineer (Hybrid Schedule) Eversource EnergyLead Engineer (Hybrid Schedule)Waterford, ConnecticutDepending on the specific assignment, this position could be situated in various service centers, accountable for specific asset systems (circuits, feeders, substations etc.) or centralized with accountability for component assets (cable, relays, transmission lines, breakers etc.). Current guidelines require employees to work at least three days in the office, including Tuesdays and Wednesdays, with the third day set by the employee and supervisor based on department needs.
NewCrane Engineer General Dynamics Electric BoatCrane EngineerGroton, ConnecticutFull timePhysical Qualifications: Climbing, Color Vision, Crawling, Heavy Lifting, Kneeling, Light Lifting, Medium Lifting, Pulling, Pushing, Reaching, Stooping, Twisting Environmental Attributes: Cold, Dry, Dusty, Fumes, Hot, Inside, Noise, Oily, Outside, Wet Engineer is to be cognizant of the structural, hydraulic, pneumatic, mechanical and electrical equipment used in lifting and handling with specific responsibility for all overhead, portal and mobile cranes reporting to various locations throughout the shipyard.
NewCrane Engineer Electric Boat CorpCrane EngineerGroton, CTEngineer is to be cognizant of the structural, hydraulic, pneumatic, mechanical and electrical equipment used in lifting and handling with specific responsibility for all overhead, portal and mobile cranes reporting to various locations throughout the shipyard. Responsibilities to include resolution of technical problems, recommending design changes, vendor liaison and input of procedures and technical support to department repair and test personnel in order to support production operations.
Project Engineer Kraft Group LLCProject EngineerMontville, CTInterface with contractors to ensure the project scope covers all details and projects are installed as intended by RWCB; insure project timeline is understood and agreed to, avoid any change orders that would impact project cost over-runs. Willingness and ability to wear safety glasses, earplugs, hard hat, steel-toed boots and any other required PPE (Personal Protective Equipment).
Willimantic Controls Engineer Prysmian SpAWillimantic Controls EngineerWillimantic, CTWith Diversity, Equity, and Inclusion (DE&I) as part of our Social Ambition 2030 and a strategic pillar of our Company culture, Prysmian is committed to the development of an organization that prioritizes talent, where people feel respected, included, and free to fully express their potential just as they are. • Manage assigned projects which includes cost estimations, designs, specifications, approvals, procurement, installation, startup, cost control, safety and overall implementation to achieve Plant and organizational objectives.
Engineer I - Systems General Dynamics CorpEngineer I - SystemsGroton, CTChallenging opportunities exist within the engineered components ship service turbine generator (SSTG) design group and construction group where engineers will practice engineering principles associated with power generation, rotating machinery, and controls to accomplish essential shipbuilding work. The individual will be required to interface with EB Engineering and Design departments, Equipment Vendors, Customers (Naval Sea Systems Command and Naval Nuclear Laboratory), Shipyard Personnel, and Ships Force.
Experienced Systems Engineer - Payload Launch Control (Senior, Specialist, Principal) General Dynamics CorpExperienced Systems Engineer - Payload Launch Control (Senior, Specialist, Principal)Groton, CTGeneral Dynamics Electric Boat is a recognized leader in the design, construction and lifecycle support of submarines for the United States Navy. The position requires an engineer to lead Government vendors, sub-contractors and other GDEB departments in the development and maintenance of a complex submarine test and training asset.
Engineer II-Supplier Development (Supply Chain) General Dynamics Electric BoatEngineer II-Supplier Development (Supply Chain)Groton, ConnecticutFull timeThe Supplier Development Engineer will work directly with SMO stakeholders (Supply Chain, Engineering, Quality, etc.) and suppliers to perform the following in support of completion of annual CSA assessments: Analysis of supply chain data including delivery rates, capacity analysis, bottlenecks, and work with the quality engineers to understand supplier performance. As part of the maritime industrial base (MIB)’s overall goals of increasing domestic shipbuilding capacity, the supplier development engineering (SDE) role brings a unique opportunity to work with various stakeholders from engineering, quality, program offices, and procurement across all levels of the business.
Engineer I - Systems General Dynamics Electric BoatEngineer I - SystemsGroton, ConnecticutFull timeChallenging opportunities exist within the engineered components ship service turbine generator (SSTG) design group and construction group where engineers will practice engineering principles associated with power generation, rotating machinery, and controls to accomplish essential shipbuilding work. The individual will be required to interface with EB Engineering and Design departments, Equipment Vendors, Customers (Naval Sea Systems Command and Naval Nuclear Laboratory), Shipyard Personnel, and Ship’s Force.
Engineer I Systems Electric Boat CorpEngineer I SystemsGroton, CTChallenging opportunities exist within the engineered components ship service turbine generator (SSTG) design group and construction group where engineers will practice engineering principles associated with power generation, rotating machinery, and controls to accomplish essential shipbuilding work. The individual will be required to interface with EB Engineering and Design departments, Equipment Vendors, Customers (Naval Sea Systems Command and Naval Nuclear Laboratory), Shipyard Personnel, and Ship's Force.
Structures - Rail Project Engineer H.W.Lochner IncStructures - Rail Project EngineerEast Hartford, CTMust be alert to equipment in the field, occasional need to work near hazardous equipment and machinery, occasional need to walk on uneven ground, exposure to dust, gas or fumes, exposure to noise, extremes in temperature or humidity, and potential work at heights. Founded in 1944, Lochner is a trusted infrastructure services provider for aviation, surface transportation and water clients who need high-quality, forward-looking solutions to complex challenges.
Payload Launch Control Systems Engineer - Entry Level General Dynamics CorpPayload Launch Control Systems Engineer - Entry LevelGroton, CTThe D440 SSN Payload Launch Control department is responsible for systems, hardware, test, and project engineering for the design, development, and qualification of payload launch control and handling systems and components supporting VIRGINIA, SSNX, and AUKUS class submarines and other payload platforms. These systems are mission and safety critical and comprised of embedded closed loop complex electronic control systems having stringent safety and security requirements, in addition to requiring high reliability, availability, maintainability and usability.
Engineer II SolvenowEngineer IIWaterford, ConnecticutPossess a 4-year Engineering degree from an ABET accredited Engineering program based on the year that the Engineering program was accredited by ABET, OR Possess a 4-year Engineering degree from an institution outside of the U.S. which is accredited through the country's own Engineering accrediting body under the Washington Accord as a full signatory, and is a degree that was recognized by the country's accrediting body on or after the date that full signatory status was achieved, OR Possess a 4-year degree in Engineering (non-ABET accredited), Physics, Chemistry, Math or Engineering Technology and a post-graduate Engineering degree from an institution where the undergraduate degree in the same Engineering discipline is ABET-accredited based on the year the Engineering program was accredited by ABET, OR Holds or has previously held a valid U.S. Professional Engineer license. MATLAB, Excel, etc.); Planning, organizational and project management skills; Ability to develop and exercise leadership skills; Effective decision making skills; Effective oral and written communication skills (includes technical writing); Ability to think analytically and solve complex problems; Ability to interpret codes, regulations and practices; Equally effective working independently or in a team environment; Ability to process information quickly and effectively manage multiple tasks.
D425 Embedded Software Engineer - Experienced General Dynamics CorpD425 Embedded Software Engineer - ExperiencedGroton, CTSpecific responsibilities include the following for the development of shipboard software applications: Analysis of system-level requirementsDevelopment of software and interface requirements Detailed design of software components that satisfy the above requirements and integration of hardware/software Development of unit testingSupport to verification and validation testing of performance and operational requirementsTroubleshoot and enhance existing software to fix defects, support new or changing hardware/requirements, or enhance features and performanceCreate and maintain formal requirements and design documentation Support development of system prototypes for research and development projects. Department 425, Electrical Systems Embedded Software Engineering, engineers apply software and computer engineering skills to specify, design, develop, integrate, and test, as well as subcontract manage software development for US Navy Nuclear Submarines.
Experienced Systems Engineer - Payload Launch Control (Senior, Specialist, Principal) General Dynamics Electric BoatExperienced Systems Engineer - Payload Launch Control (Senior, Specialist, Principal)Groton, ConnecticutFull timeThe position requires an engineer to lead Government vendors, sub-contractors and other GDEB departments in the development and maintenance of a complex submarine test and training asset. Overview: Department 440: Payload Launch Control Systems Engineering group supporting SEAWOLF, VIRGINIA and COLUMBIA programs.
NewTest Engineer - Submarine Operations Technical Lead Electric Boat CorpTest Engineer - Submarine Operations Technical LeadGroton, CTAs part of this directorate, Department 403 - Technical Services provides writing, editing, logistics, and production services in the development and maintenance of logistic technical data (LTD), including ship systems manuals and component technical manuals for OHIO, SEAWOLF, VIRGINIA, SSGN, and COLUMBIA. As a submarine operations technical lead, they will have technical oversight over a writing group and LTD product line, working directly with D403 supervision and Electric Boat engineering departments to ensure product accuracy and quality for shipboard use.
NewTest Engineer – Submarine Operations Technical Lead General Dynamics Electric BoatTest Engineer – Submarine Operations Technical LeadGroton, ConnecticutFull timeAs part of this directorate, Department 403 – Technical Services provides writing, editing, logistics, and production services in the development and maintenance of logistic technical data (LTD), including ship systems manuals and component technical manuals for OHIO, SEAWOLF, VIRGINIA, SSGN, and COLUMBIA. As a submarine operations technical lead, they will have technical oversight over a writing group and LTD product line, working directly with D403 supervision and Electric Boat engineering departments to ensure product accuracy and quality for shipboard use .
NewEngineer Sr/Specialist - Submarine Operations Technical Lead General Dynamics Electric BoatEngineer Sr/Specialist - Submarine Operations Technical LeadGroton, ConnecticutFull timeAs part of this directorate, Department 403 – Technical Services provides writing, editing, logistics, and production services in the development and maintenance of logistic technical data (LTD), including ship systems manuals and component technical manuals for OHIO, SEAWOLF, VIRGINIA, SSGN, and COLUMBIA. As a submarine operations technical lead, they will have technical oversight over a writing group and LTD product line, working directly with D403 supervision and Electric Boat engineering departments to ensure product accuracy and quality for shipboard use .
D425 Embedded Software Engineer - Experienced General Dynamics Electric BoatD425 Embedded Software Engineer - ExperiencedGroton, ConnecticutFull timeOverview: Department 425, Electrical Systems Embedded Software Engineering, engineers apply software and computer engineering skills to specify, design, develop, integrate, and test, as well as subcontract manage software development for US Navy Nuclear Submarines. Collaborating with systems, hardware, and test engineers, software is developed, tested and maintained for a variety of submarine platforms.
CAVES Systems Engineer General Dynamics CorpCAVES Systems EngineerGroton, CTSuccessful applicant will be required to assist in the System Engineering efforts ranging from initial system design through development, hardware/software integration, component qualification, test, construction support, delivery, and post-delivery support to include analysis and resolution of fleet identified problems, assessment of obsolescence issues, and identification of components for technical refresh. System Engineering efforts related to contractor furnished SONAR systems include the Large Vertical Array (LVA), Bow Conformal Array (BCA), Integrated Search and Survey (ISS), as well as various developmental systems and Government Furnished Equipment (GFE) SONAR sensors, arrays, and components.
Experienced Systems Engineer Payload Launch Control (Senior, Specialist, Principal) Electric Boat CorpExperienced Systems Engineer Payload Launch Control (Senior, Specialist, Principal)Groton, CTThe position requires an engineer to lead Government vendors, sub-contractors and other GDEB departments in the development and maintenance of a complex submarine test and training asset. Department 440: Payload Launch Control Systems Engineering group supporting SEAWOLF, VIRGINIA and COLUMBIA programs.
CAVES Systems Engineer Electric Boat CorpCAVES Systems EngineerNew London, CTSuccessful applicant will be required to assist in the System Engineering efforts ranging from initial system design through development, hardware/software integration, component qualification, test, construction support, delivery, and post-delivery support to include analysis and resolution of fleet identified problems, assessment of obsolescence issues, and identification of components for technical refresh. System Engineering efforts related to contractor furnished SONAR systems include the Large Vertical Array (LVA), Bow Conformal Array (BCA), Integrated Search and Survey (ISS), as well as various developmental systems and Government Furnished Equipment (GFE) SONAR sensors, arrays, and components.
NewEngineer Sr/Specialist Submarine Operations Technical Lead Electric Boat CorpEngineer Sr/Specialist Submarine Operations Technical LeadNew London, CTAs part of this directorate, Department 403 - Technical Services provides writing, editing, logistics, and production services in the development and maintenance of logistic technical data (LTD), including ship systems manuals and component technical manuals for OHIO, SEAWOLF, VIRGINIA, SSGN, and COLUMBIA. As a submarine operations technical lead, they will have technical oversight over a writing group and LTD product line, working directly with D403 supervision and Electric Boat engineering departments to ensure product accuracy and quality for shipboard use.
NewProject Engineer General Dynamics Electric BoatProject EngineerGroton, ConnecticutFull timeD498 engineers also work with vendors and shipyard personnel through the review and disposition of VIRs (Vendor Information Requests) and CNs (change notices), providing technical oversight throughout the build of products on our design disclosures, and resolving technical problems while also performing calculations to support these products. D498 engineers work as a team with D453 Mechanical Design to complete COLUMBIA Class Rev A design disclosures and COLUMBIA Class Design Changes.
Engineer Sr. - Materials General Dynamics CorpEngineer Sr. - MaterialsGroton, CTAssuming overall responsibility for department quality by performing quality assurance audits and instituting processes to eliminate recurring errors. This position is responsible for the technical cognizance of analytical methods performed within the Metrology laboratories at Electric Boat and all off site operations.
Engineer Spec/Prin - Technical Services General Dynamics CorpEngineer Spec/Prin - Technical ServicesGroton, CTAs part of this directorate, Department 403 Technical Services provides writing, editing, logistics, and production services in the development and maintenance of logistic technical data (LTD), including ship systems manuals and component technical manuals for OHIO, SEAWOLF, VIRGINIA, SSGN, and COLUMBIA. These products include ship systems manuals, component technical manuals, steam and electric plant manuals, maintenanceand alteration documents.
Industrial IoT / Sensor Integration Engineer Applied Information SciencesIndustrial IoT / Sensor Integration EngineerGroton, ConnecticutThis role will focus on instrumenting equipment for telemetry collection, troubleshooting sensor and connectivity issues, and interfacing installed sensors with local edge/gateway devices for upstream data transmission to enterprise monitoring platforms. Core Knowledge & Skills: Designs complex network and hybrid‑cloud solutions; implements security controls, DR/BCP, and automated IaC with deployment pipelines; performs advanced performance tuning.
Design Engineer AMETEK IncDesign EngineerWesterly, RIKey Responsibilities: Work with customers (internal and external) to develop and document complex products for harsh subsea environment applications that meet performance requirements at the expected product cost, project budget and timeline. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.5 billion.
Strategic Weapon Systems (SWS) Test Engineer General Dynamics CorpStrategic Weapon Systems (SWS) Test EngineerGroton, CTThe Strategic Weapons System Test Engineer must proactively prepare for and execute assigned Strategic Weapon System Testing for the COLUMBIA new construction submarine, in a safe and efficient manner. Preferred: Mechanical system test experience to include fluid or air system flush and hydrostatic testing, or: Electrical/Electronic system test experience, including fiber optic cabling.
Strategic Weapon Systems (SWS) Test Engineer General Dynamics Electric BoatStrategic Weapon Systems (SWS) Test EngineerGroton, ConnecticutFull timeOverview: The Strategic Weapons System Test Engineer must proactively prepare for and execute assigned Strategic Weapon System Testing for the COLUMBIA new construction submarine, in a safe and efficient manner. Physical Qualifications: Climbing, Crawling, Kneeling, Medium Lifting, Pulling, Pushing, Reaching, Twisting Environmental Attributes: Cold, Dry, Dusty, Fumes, Hot, Inside, Noise, Oily, Outside, Wet