Mechanical Technician (Facilities) Space Exploration TechnologiesMechanical Technician (Facilities)Hawthorne, CA$23–$32.50 / hourRESPONSIBILITIES: Collaborate with engineers, managers, and customers to maintain systems in peak operating condition, and to develop/update detailed work instructions for proper equipment preventative maintenance dedicated to ensuring zero unplanned interruption in services to employees and customers. PREFERRED SKILLS AND EXPERIENCE: Knowledge in the following areas: HVAC, plumbing, electrical safety, pneumatic principles, tubing, pipefittings, rotating machinery (pumps, air compressors, etc.), and a variety of mechanical fasteners.
NewProduct Technician - 1st Shift Karman Holdings IncProduct Technician - 1st ShiftHuntington Beach, CAHowever, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Hvac Technician - 2Nd Shift Space Exploration TechnologiesHvac Technician - 2Nd ShiftHawthorne, CA$23–$32.50 / hourRESPONSIBILITIES: Collaborate with engineers, managers, and customers to maintain systems in peak operating condition, and to develop/update detailed work instructions for proper equipment preventative maintenance dedicated to ensuring zero unplanned interruption in services to employees and customers. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Quality Technician - 1St Shift Eaton CorporationQuality Technician - 1St ShiftSanta Ana, CAAfter making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. Contribute to pre-production quality planning, including developing Quality Assembly documents, attending product and process reviews and technical training of production personnel.
Power Electronics Technician Harbinger Motors IncPower Electronics TechnicianGarden Grove, CA$30–$40 / hourHarbinger may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with our legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Harbinger may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform their duties, including individuals on our HR, legal, and finance teams, and the team(s) with the position(s) for which you are applying; (ii) Harbinger affiliates; and (iii) Harbinger's service providers, including providers of background checks, staffing services, and cloud services.
DC Assembly and Test Technician ConsultNetDC Assembly and Test TechnicianOntario, CA$30–$35 / hourPerform insertion loss, impedance testing on the products, and perform calibration of coaxial and waveguide components using VNA or Client 8510 network analyzers, other testing equipment or setups. For over 25 years, we have connected thousands of consultants with meaningful roles through a personal, communication-driven approach, partnering with a diverse client base to build high-performing teams and create lasting impact.
Quality Technician - 2Nd Shift Eaton CorporationQuality Technician - 2Nd ShiftSanta Ana, CAContribute to pre-production quality planning, including developing Quality Assembly documents, attending product and process reviews and technical training of production personnel. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report.
Precision Assembly Technician AtWork Orange CountyPrecision Assembly TechnicianIrvine, CA$20–$22 / hourUsing common hand tools and measuring devices, you’ll assemble parts with care, verify dimensions with a ruler, and perform a final inspection to confirm fit, finish, and function. As an entry-level assembler, you’ll help turn individual parts into finished products that meet exacting customer specs.
NewChiller Technician Alakaina Foundation Family of CompaniesChiller TechnicianNorco, CABering-Alaka ina Holdings, LLC is comprised of industry-recognized government service firms designated as Alaska Native Corporation (ACN)-owned and 8(a) certified businesses and includes Ke aki Technologies, LLC; Laulima Government Solutions, LLC; Kpono Government Services, LLC; Kapili Services, LLC; Po`okela Solutions, LLC; Kkaha Solutions, LLC;and Pololei Solutions, LLC. Troubleshoots, install, tests, repairs, modify, relocates, maintains, and calibrates refrigeration equipment, air conditioning equipment, pneumatics controls and auxiliary equipment such as drinking fountains, exhaust fans, supply fans and smoke purge fans etc.
Avionics Technician AstroForgeAvionics TechnicianSeal Beach, CaliforniaITAR Requirements To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by ITAR (22 CFR §120.15), or eligible to obtain the required authorizations from the U.S. Department of State. Your role will require a blend of precision, speed, and problem-solving, as you'll be working on both space and ground systems in a fast-paced environment where accuracy, quality and reliability are paramount.
LRU Technician ANDURIL INDUSTRIESLRU TechnicianCosta Mesa, CA$32–$42 / hourKey Responsibilities: Execute precise electromechanical assembly of flight and development avionics hardware, including the fitting and integration of PCBAs, torquing, sealing, alignment, harness routing, thermal interface installation, and enclosure assembly to deliver fully integrated avionics units. To ensure your safety and help you navigate your job search with confidence, please keep the following critical points in mind: No Financial Requests: Anduril will never solicit payment or demand personal financial details (such as banking information, credit card numbers, or social security numbers) at any stage of our hiring process.
Avionics Battery Technician Impulse Space Propulsion Inc.Avionics Battery TechnicianRedondo Beach, CA$25–$45 / hourThis position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Impulse Space's spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR).
New- Central Service Technician CST STAFF TODAY- Central Service Technician CSTTorrance, CAAssignment Information: Is currently in need of Central Service Technicians (CSTs) with a minimum of 1 years of practical experience as a CST responsible for the overall cleaning, decontamination, assembly, packaging, and dispensing of surgical instruments, equipment and supplies needed for surgical procedures in surgery and related departments such as operating room, procedural areas, and outpatient clinics. Required certifications include Certified Registered Central Service Technician (CRCST) or a certificate confirming successful completion of sterile processing course, AHA BLS, MAB or CPI, LA City Fire and Life Safety card (must be LA City Fire), and must complete the LA County Employee Health Clearance before assignment start date.
Quality Technician - 3Rd Shift Eaton CorporationQuality Technician - 3Rd ShiftSanta Ana, CAContribute to pre-production quality planning, including developing Quality Assembly documents, attending product and process reviews and technical training of production personnel. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report.
Composites Technician Mach IndustriesComposites TechnicianHuntington Beach, CaliforniaPerform lay-up, bagging, curing, trimming, and finishing of composite parts using prepreg, wet layup, and resin infusion techniques. Mach participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. The salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only.
Additive Technician Raptor Space Exploration Technologies CorpAdditive Technician RaptorHawthorne, CA$23–$27 / hourITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.
Quality Technician - 1st Shift Eaton Corporation PlcQuality Technician - 1st ShiftSanta Ana, CAAfter making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. Contribute to pre-production quality planning, including developing Quality Assembly documents, attending product and process reviews and technical training of production personnel.
HVAC Technician - 2nd Shift Space Exploration Technologies CorpHVAC Technician - 2nd ShiftHawthorne, CA$23–$32.50 / hourRESPONSIBILITIES: Collaborate with engineers, managers, and customers to maintain systems in peak operating condition, and to develop/update detailed work instructions for proper equipment preventative maintenance dedicated to ensuring zero unplanned interruption in services to employees and customers. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Plumbing Technician - 2nd Shift Facilities Space Exploration Technologies CorpPlumbing Technician - 2nd Shift FacilitiesHawthorne, CA$23–$32.50 / hourRESPONSIBILITIES: Collaborate with engineers, managers, and customers to maintain systems in peak operating condition, and to develop/update detailed work instructions for proper equipment preventative maintenance dedicated to ensuring zero unplanned interruption in services to employees and customers. PREFERRED SKILLS AND EXPERIENCE: Knowledge in the following areas: HVAC, plumbing, electrical safety, pneumatic principles, tubing, pipefittings, rotating machinery (pumps, air compressors, etc.), and a variety of mechanical fasteners.
Injection Molding Tooling Maintenance Technician, Manufacturing - Life Science Compagnie de Saint-GobainInjection Molding Tooling Maintenance Technician, Manufacturing - Life ScienceGarden Grove, CA$28–$38 / hourWithin Mobility, our teams design and engineer critical, high-performance materials and proven solutions - most in challenging conditions and core systems that play an important part of our daily lives - as we drive to work or with family, fly on an airplane to explore the world, process samples for medical research, build a better rocket to go as far as we can in outer space; and dive deep under the sea to power our world. They allow access to information such as the characteristics of your terminal or certain personal data (IP addresses, navigation data on the Saint-Gobain site, etc.) for the following purposes: analysis and improvement of the user experience and/or our offer of content, products and services; audience measurement and analysis; interactions with social networks; display of advertising and personalized content.
Construction Technician Space Exploration Technologies CorpConstruction TechnicianHawthorne, CA$22–$24.50 / hourRESPONSIBILITIES: Perform finish carpentry tasks, such as door installation and framing, drywall repair, tiling, carpeting, concrete pouring, cabinetry, layout, installation, repair, finishing, maintaining various structures, fixtures and buildings. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Sheet Metal Fabrication Technician Assa Abloy ABSheet Metal Fabrication TechnicianBaldwin Park, CA$22–$26 / hourDepartamento: Producción Reporta a: Supervisor de Fabricación Descripción General del Puesto: El Técnico en Fabricación Metálica es responsable de realizar tareas de fabricación y ensamblaje de componentes metálicos utilizados en puertas enrollables comerciales. Lawrence Doors, Inc., a leader in the commercial door industry, and a part of Amarr / ASSA ABLOY Group (the global leader in opening solutions), is seeking a Sheet Metal Fabrication Technician to work in our Production Line.
Propulsion Technician Raptor Manufacturing Systems Space Exploration Technologies CorpPropulsion Technician Raptor Manufacturing SystemsHawthorne, CA$23–$27 / hourITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.
Structures Technician Impulse Space Propulsion Inc.Structures TechnicianRedondo Beach, CA$30–$45 / hourThis position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Hand drilling, match drilling, step drilling, tapping, countersinking, and chamfering using pneumatic drills and hand tools.
Mission Analyst - Long Beach, CA (Contractor) Latitude AIMission Analyst - Long Beach, CA (Contractor)Long Beach, CA$29.15–$43.73 / hourWhen you join the Latitude team, you'll work alongside leading experts across machine learning and robotics, cloud platforms, mapping, sensors and compute systems, test operations, systems and safety engineering - all dedicated to making a real, positive impact on the driving experience for millions of people. What you'll do: Drive test vehicles for long-distance local missions (up to 300-400 miles) and on select travel missions, including multi-day trips across the U.S. Perform daily start-up, engagement, disengagement, and shutdown procedures for development vehicles.
Avionics Technician (PCBA) Impulse Space Propulsion Inc.Avionics Technician (PCBA)Redondo Beach, CA$35–$45 / hourThis position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. As a PCBA Technician, you will perform a wide range of spacecraft assembly, rework, and diagnostic tasks to support the development and production of high-reliability avionics and flight hardware.
Final Integration Technician Mach IndustriesFinal Integration TechnicianHuntington Beach, CABuild a variety of pilot and pre-production assemblies using Manufacturing Execution Systems (MES) for mission-critical components, including high-voltage power systems and complex electromechanical assemblies. Mach participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. The salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only.
Fabrication Technician AstroForgeFabrication TechnicianSeal Beach, CaliforniaITAR Requirements To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by ITAR (22 CFR §120.15), or eligible to obtain the required authorizations from the U.S. Department of State. This role is ideal for someone passionate about precision fabrication, thrives in a collaborative environment, and takes pride in delivering high-quality hardware that will venture into deep space.
Quality Documentation Technician Murrietta CircuitsQuality Documentation TechnicianAnaheim, CaliforniaMurrietta Circuits is seeking a detail-oriented and organized Quality Documentation Technician to support our Assembly Quality Control Department within our Printed Circuit Board (PCB/PCBA) manufacturing environment. Murrietta Circuits is a Southern California-based manufacturer specializing in printed circuit board fabrication and electronic assembly services for aerospace, medical, industrial, and technology-driven industries.
Manufacturing Technician AerotekManufacturing TechnicianTorrance, CA$22–$34 / hourSince 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests.
Propulsion Technician Raptor Production Machining - 2nd Shift Space Exploration Technologies CorpPropulsion Technician Raptor Production Machining - 2nd ShiftHawthorne, CA$23–$27 / hourITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.
Sr. Vehicle Build Technician II Rivian Automotive IncSr. Vehicle Build Technician IITustin, CA$37.42–$46.77 / hourRivian may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with our legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Rivian may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform their duties, including individuals on our People Team, Finance, Legal, and the team(s) with the position(s) for which you are applying; (ii) Rivian affiliates; and (iii) Rivian's service providers, including providers of background checks, staffing services, and cloud services.
Propulsion Technician Super Heavy Booster Propulsion Systems Space Exploration Technologies CorpPropulsion Technician Super Heavy Booster Propulsion SystemsHawthorne, CA$23–$27 / hourPREferred SKILLS AND EXPERIENCE: • 3+ years of aerospace component testing experience • Trained in assembly or testing of propulsion, aviation or aerospace hardware • High pressure testing knowledge • High voltage testing knowledge • A&P license • Experience and knowledge operating brazement furnace • Experience working with thin-walled tubing • Experience working with Inconel, titanium, aluminum, nickel, and stainless steel • Knowledge of orbital tube welding (OTW) • Lean manufacturing (5S) knowledge and experience • High attention to detail in order to ensure safety and accuracy of testing procedures • Experience with pressure/temperature/flow measurement devices and mechanical/electrical systems • Strong mathematical, problem-solving, and decision-making skills • Basic computer experience • The ability to effectively communicate (verbal and written) with engineering and production teams at all levels of the business • The ability to work autonomously or as part of a team to achieve inspiring production goals. The propulsion systems technician team serve as hardware build and test experts for Booster subassembly prop systems - Unique weldments and avionics subassemblies that provide increased performance and operational capability to Raptor and Super Heavy.
Propulsion Technician Raptor Production Machining Space Exploration Technologies CorpPropulsion Technician Raptor Production MachiningHawthorne, CA$23–$27 / hourYou may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. This is a dynamic position that requires the flexibility to work on different systems, the ability to troubleshoot anomalies, and the ability to work autonomously on defined schedules while keeping safety and quality at the forefront of everything that is done.
Automation & Torque Tooling Technician ANDURIL INDUSTRIESAutomation & Torque Tooling TechnicianCosta Mesa, CA$48–$57 / hourThis will require deep technical expertise in smart tooling hardware (such as Atlas Copco, Cleco, or Desoutter), network configuration for tooling controllers, and hands-on mechanical and electrical troubleshooting of assembly line equipment. To ensure your safety and help you navigate your job search with confidence, please keep the following critical points in mind: No Financial Requests: Anduril will never solicit payment or demand personal financial details (such as banking information, credit card numbers, or social security numbers) at any stage of our hiring process.
Lead Aircraft Maintenance Technician (eVTOL) Odys AviationLead Aircraft Maintenance Technician (eVTOL)Long Beach, CaliforniaYou will be responsible for the fabrication, installation, and troubleshooting of complex avionics systems on our eVTOL aircraft, with a specific focus on integrating mission-critical payloads (sensors, cameras, communications). Our flagship aircraft Alta enables travelers to skip the big-airport hassle by using city helipads and local airports to connect cities less than 1,000 miles apart (approx 40% of flights).
NewSr. Wiring Harness Quality Technician (Contract) ArcTern VenturesSr. Wiring Harness Quality Technician (Contract)Garden Grove, CA$30–$40 / hourLab Stewardship: Maintain a clean, organized, and safe laboratory environment (5S).Required Skills & QualificationsExperience: 5+ years of experience building complex wire harnesses from scratch. Harbinger's best‑in‑class team of EV, battery, and drivetrain experts have pooled their deep experience to bring a first‑of‑its‑kind EV platform to support the growing demand for medium‑duty EVs and hybrids.
Production Technician Mesh Optical TechnologiesProduction TechnicianGardena, CaliforniaAs an early member of the production team, you will help establish workflows, support production ramp, and contribute directly to how our factory operates as it grows. This is a hands-on role responsible for assembling precision hardware, operating automated equipment, and maintaining consistent, high-quality output.
Mission Analyst - Long Beach, CA Contractor Latitude AI LLCMission Analyst - Long Beach, CA ContractorLong Beach, CA$29.15–$43.73 / hourWhen you join the Latitude team, you'll work alongside leading experts across machine learning and robotics, cloud platforms, mapping, sensors and compute systems, test operations, systems and safety engineering - all dedicated to making a real, positive impact on the driving experience for millions of people. What you'll do: Drive test vehicles for long-distance local missions (up to 300-400 miles) and on select travel missions, including multi-day trips across the U.S. Perform daily start-up, engagement, disengagement, and shutdown procedures for development vehicles.
Lead Production Technician, Electromagnetic Warfare ANDURIL INDUSTRIESLead Production Technician, Electromagnetic WarfareIrvine, CA$37–$49 / hourThe Manufacturing Production team is responsible for a wide range of activities that are crucial to the manufacturing process including operating equipment, assembling products, performing quality control checks, and maintaining a safe and efficient work environment. To ensure your safety and help you navigate your job search with confidence, please keep the following critical points in mind: No Financial Requests: Anduril will never solicit payment or demand personal financial details (such as banking information, credit card numbers, or social security numbers) at any stage of our hiring process.
Quality Technician - 3rd Shift Eaton Corporation PlcQuality Technician - 3rd ShiftSanta Ana, CAContribute to pre-production quality planning, including developing Quality Assembly documents, attending product and process reviews and technical training of production personnel. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report.
Assembly & Test Technician II - First Shift Relativity SpaceAssembly & Test Technician II - First ShiftLong Beach, CA$28.80–$43.20 / hourYou will work alongside leadership and engineering to conduct pressure testing, mechanical assembly, and precision cleaning work on various fluid assemblies for the Terran R rocket and Aeon R rocket engine. Experience using fluid equipment such as sonicating immersion cleaning tanks, flushing equipment, pressure washing equipment, or high-pressure hydrostatic proof testing pumps.
Compressed Air Technician Facilities Space Exploration Technologies CorpCompressed Air Technician FacilitiesHawthorne, CA$23–$32.50 / hourRESPONSIBILITIES: Collaborate with engineers, managers, and customers to maintain systems in peak operating condition, and to develop/update detailed work instructions for proper equipment preventative maintenance dedicated to ensuring zero unplanned interruption in services to employees and customers. PREFERRED SKILLS AND EXPERIENCE: Knowledge in the following areas: HVAC, plumbing, electrical safety, pneumatic principles, tubing, pipefittings, rotating machinery (pumps, air compressors, etc.), and a variety of mechanical fasteners.
Production Technician - 3rd shift Karman Holdings IncProduction Technician - 3rd shiftHuntington Beach, CAITAR REQUIREMENTS: To conform to U.S. Government export regulations, certain positions may require applicants to be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information.
Senior Manufacturing Engineer, Motors Neros TechnologiesSenior Manufacturing Engineer, MotorsTorrance, CaliforniaVendor & Supply Coordination: Work with suppliers to ensure the quality and consistency of incoming raw materials (e.g., Japanese NSK/NMB bearings, Neodymium magnets, high-purity copper wiring, and aluminum bells). Quality & Yield Improvement: Analyze production defects, determine root causes of motor failures (such as shorts, bearing noise, or unbalance), and implement corrective actions to maximize yield.
Sr. Manufacturing Engineer, Motors Neros TechnologiesSr. Manufacturing Engineer, MotorsTorrance, CA$120,000–$180,000 / yearVendor & Supply Coordination: Work with suppliers to ensure the quality and consistency of incoming raw materials (e.g., Japanese NSK/NMB bearings, Neodymium magnets, high-purity copper wiring, and aluminum bells). Quality & Yield Improvement: Analyze production defects, determine root causes of motor failures (such as shorts, bearing noise, or unbalance), and implement corrective actions to maximize yield.
Test Technician Element Materials Technology Group LtdTest TechnicianAnaheim, CA$21–$23 / hourFrom early R&D, through complex regulatory approvals and into production, our global laboratory network of scientists, engineers, and technologists support customers to achieve assurance over product quality, sustainable outcomes, and market access. As a member of the operations team, the Test Technician position performs a variety of routine and non-routine testing assignments within the department assigned and insures timely and accurate test results under direct supervision.
NewElectro Maintenance Technician JobotElectro Maintenance TechnicianFullerton, CA$35–$40 / hourInformation collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. Experience with equipment packaging equipment (labelers, rotary and in-line filler, in-line cappers, jet printers, cartoner's, bundlers, sleevers, heat tunnels and case sealers).
NewLead Maintenance Technician JobotLead Maintenance TechnicianParamount, CA$40–$45 / hourInformation collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. Our client is a privately held, globally recognized manufacturer of precision forged metal components serving some of the most demanding industries in the world, including aerospace, defense, space exploration, and power generation.
Test Technician Applied Aerospace & DefenseTest TechnicianLong Beach, CaliforniaPCX remains at the forefront of aerospace manufacturing, with highly-engineered, flight-critical components & complex assemblies for a diverse range of military & space applications. We’re looking for experienced individuals who have technical aptitude, enthusiasm to learn new skills and material, and as importantly an ability to work well with a highly technical, dynamic, and cohesive team.