NewPsychiatric Technician (Safety) California Department of State HospitalsPsychiatric Technician (Safety)Cayucos, CA$5,673–$6,599Perform nursing procedures such as administering medications including oral medications and hypodermic injection, observing patients or inmates physical condition and behavior and reporting significant changes to a shift supervisor, unit supervisor or physician and recording nursing notes: in the patients or inmate records. The Psychiatric Technician (Safety) will be directed by the Unit Supervisor, RN Shift Lead, Senior Psychiatric Technician, or Health Services Specialist depending on the shift/program assigned at the Department of State Hospitals – Atascadero (ASH).
Procurement Technician B-52 Div (WBD) - 1.3.19 CredenceProcurement Technician B-52 Div (WBD) - 1.3.19WPAFB, OHProvide assistance to the CO with the following tasks: preparing contracts and modifications; distributing contract documentation; providing database support and computer applications; supporting contract closeout; collecting data for audit and/or report requests; coordinating with other Government agencies and DFAS; creating, retrieving and requesting contracting reports; producing copies of acquisition documentation; preparing source selection material; and tracking contract milestones. #veteranemployment #militaryspouse #milspouse #hireavet #militaryveteran #militaryfriendly #transitioningmilitary #veterans #militarytransition #militaryfamilies #msep #militarytocivilian #military #federalcontractingjobs #defensecontracting #defenseindustryjobs.
Engineering Technician IV JT4 LLCEngineering Technician IVNorth Las Vegas, NevadaAn Engineering Technician IV provides support to the engineering and design staff through performing a variety of non-routine and complex assignments during the installation, maintenance, repair, troubleshooting, calibration, testing, fabrication, construction, and operation of diverse electronic/mechanical equipment and systems in accordance with engineering specifications. Employee will be responsible to perform the following functions/duties: Supports electronic transmitting and receiving equipment, digital and analog computers, industrial measuring and controlling equipment, microwave amplifiers and RF components, transmission lines, high- voltage power supplies and keying circuits, indicators and displays, and antenna positioning systems.
Electronic Technician - RF/RADAR JT4 LLCElectronic Technician - RF/RADARLas Vegas, Nevada$34.86–$39.22 / hourElectronic Technician III Requirements An associate's degree or higher from an accredited college; or technical schooling with courses in math, basic electronics, and microwave theory; or a military equivalent and a minimum of seven (7) years of hands-on experience are required for this position. Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
NewEngineering Technician V JT4 LLCEngineering Technician VEdwards AFB, California$81,432–$86,112 / yearAn Engineering Technician V provides support to the engineering and design staff through performing a variety of non-routine and complex assignments during the installation, maintenance, repair, troubleshooting, calibration, testing, fabrication, construction, and operation of diverse electronic/mechanical equipment and systems in accordance with engineering specifications. Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver’s license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee’s ability to maintain employment.
Electronics Technician III JT4 LLCElectronics Technician IIILas Vegas, Nevada$81,120–$85,280 / yearEmployee will be responsible for the following functions/duties: Operate and maintain electronic transmitting and receiving equipment, digital and analog computers, industrial measuring and controlling equipment, microwave amplifiers and transmission lines, high-voltage power supplies and keying circuits, indicators and displays, and antenna positioning systems. Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
Electronics Technician I - Indian Springs JT4 LLCElectronics Technician I - Indian SpringsIndian Springs, NevadaOperate and maintain electronic transmitting and receiving equipment, digital and analog computers, industrial measuring and controlling equipment, microwave amplifiers and transmission lines, high-voltage power supplies and keying circuits, indicators and displays, and antenna positioning systems. Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
Electro-Mechanical Technician JT4 LLCElectro-Mechanical TechnicianDugway, UtahWorking under general technical guidance, an Electronic Technician specializes in ground-based electronic systems and works on various types of electronic equipment and related devices through a combination of installing, maintaining, repairing, overhauling, troubleshooting, modifying, construction, and testing. Employee will be responsible for the following functions/duties: Operate and maintain electronic transmitting and receiving equipment, digital and analog computers, industrial measuring and controlling equipment, microwave amplifiers and transmission lines, high-voltage power supplies and keying circuits, indicators and displays, and antenna positioning systems.
Electronic Technician (COMM, FTS & Telemetry) JT4 LLCElectronic Technician (COMM, FTS & Telemetry)Dugway, UtahWorking under general technical guidance, an Electronic Technician specializes in ground-based electronic systems and works on various types of electronic equipment and related devices through a combination of installing, maintaining, repairing, overhauling, troubleshooting, modifying, construction, and testing. Employee will be responsible for the following functions/duties: Operate and maintain electronic transmitting and receiving equipment, digital and analog computers, industrial measuring and controlling equipment, microwave amplifiers and transmission lines, high-voltage power supplies and keying circuits, indicators and displays, and antenna positioning systems.
Electronics Technician - LEAD JT4 LLCElectronics Technician - LEADBeatty, NevadaWorking as a group/team lead, an Electronic Technician III, Lead specializes in ground-based electronic systems and works on various types of electronic equipment and related devices by performing a combination of installing, maintaining, repairing, overhauling, troubleshooting, modifying, construction, and testing. Operate and maintain electronic transmitting and receiving equipment, digital and analog computers, industrial measuring and controlling equipment, microwave amplifiers and transmission lines, high-voltage power supplies and keying circuits, indicators and displays, and antenna positioning systems.
Electronic Technician JT4 LLCElectronic TechnicianDugway, UtahWorking under general technical guidance, an Electronic Technician specializes in ground-based electronic systems and works on various types of electronic equipment and related devices through a combination of installing, maintaining, repairing, overhauling, troubleshooting, modifying, construction, and testing. Employee will be responsible for the following functions/duties: Operate and maintain electronic transmitting and receiving equipment, digital and analog computers, industrial measuring and controlling equipment, microwave amplifiers and transmission lines, high-voltage power supplies and keying circuits, indicators and displays, and antenna positioning systems.
Electronics Technician JT4 LLCElectronics TechnicianDugway, UtahOperates and maintains electronic transmitting and receiving equipment, digital and analog computers, industrial measuring and controlling equipment, microwave amplifiers and transmission lines, high voltage power supplies and keying circuits, indicators and displays, and antenna positioning systems. Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license or other licenses/certifications, and the inability to obtain and maintain the required clearance, license or certification may affect an employee's ability to maintain employment.
Electronics Technician II JT4 LLCElectronics Technician IIBeatty, NevadaOperate and maintain electronic transmitting and receiving equipment, digital and analog computers, industrial measuring and controlling equipment, microwave amplifiers and transmission lines, high-voltage power supplies and keying circuits, indicators and displays, and antenna positioning systems. Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
Communications Technician II JT4 LLCCommunications Technician IITonopah, NevadaWorking under general technical guidance, an Electronic Technician IIspecializes in ground-based electronic systems and works on various types of electronic equipment and related devices through a combination of installing, maintaining, repairing, overhauling, troubleshooting, modifying, construction, and testing. Employee will be responsible for the following functions/duties: Operate and maintain electronic transmitting and receiving equipment, digital and analog computers, industrial measuring and controlling equipment, microwave amplifiers and transmission lines, high-voltage power supplies and keying circuits, indicators and displays, and antenna positioning systems.
NewSupply Technician JT4 LLCSupply TechnicianSalt Lake City, UtahSome jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license or other licenses / certifications and the inability to obtain and maintain the required clearance, license or certification may affect an employee's ability to maintain employment. JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
Vulnerability Management Technician JT4 LLCVulnerability Management TechnicianLas Vegas, Nevada$79,040–$85,280 / yearSome jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment. Occasional lifting (up to 20 pounds), constant sitting while using a computer terminal; constant use of sight abilities while writing, reviewing, and editing documents; constant use of speech/hearing abilities for communication; and constant mental alertness are required.
Elec Tech III - Flight Test Instrumentation Technician Level III JT4 LLCElec Tech III - Flight Test Instrumentation Technician Level IIIEdwards AFB, California$84,000–$94,000 / yearApply technical knowledge of electronic principles to solve complex problems using diagrams, schematics, engineering data, and test equipment, including power systems, sensors/transducers, data/video recording, TSPI, Ethernet, and telemetry subsystems. Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver’s license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee’s ability to maintain employment.
Electronic Technician - China Lake CA JT4 LLCElectronic Technician - China Lake CARidgecrest, California$76,086–$85,592 / yearWorking under general technical guidance, an Electronic Technician specializes in ground-based electronic systems and works on various types of electronic equipment and related devices through a combination of installing, maintaining, repairing, overhauling, troubleshooting, modifying, construction, and testing. Employee will be responsible to perform the following functions/duties: Operate and maintain electronic transmitting and receiving equipment, digital and analog computers, industrial measuring and controlling equipment, microwave amplifiers and transmission lines, high-voltage power supplies and keying circuits, indicators and displays, and antenna positioning systems.
NewOrdnance Electric Support Technician DCS CorpOrdnance Electric Support TechnicianPatuxent River, Maryland$66,511–$113,255 / yearThe Ordnance Electrical Technician Level III will support the Ordnance Electronics Lab under the Naval Test Wing Atlantic, a vital component of the Naval Air Warfare Center Aircraft Division (NAWCAD). In this part-time role with flexible work hours, you will perform critical modification, instrumentation, and configuration of BRU-32 equipment to enable essential weapons testing across multiple platforms, primarily focusing on the F/A-18.
NewAerospace Electrical Engineer (Entry-Level to Experienced) STS Technical ServicesAerospace Electrical Engineer (Entry-Level to Experienced)Lakehurst, NJIf you’re ready to advance your aerospace engineering career while supporting military aircraft integration and national defense programs, apply today to join STS Technical Services in Lakehurst, New Jersey. STS Technical Services is a Top 100 Staffing Firm that partners with leading aerospace, defense, manufacturing, and industrial organizations throughout the United States.
Air Traffic Control Specialist Station JT4 LLCAir Traffic Control Specialist StationNorth Las Vegas, NevadaA high school diploma, or equivalent, completion of an accredited military air traffic control school or FAA school or program that involves aviation, including Air Traffic Control, Airfield Management, Flight Service or other military aviation or tactical airspace specialties. Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
Eng Tech II - Instrumentation Logistician Level II JT4 LLCEng Tech II - Instrumentation Logistician Level IIEdwards AFB, California$48,000–$58,000 / yearSome jobs may require a candidate to be eligible for a government security clearance, state-issued driver’s license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee’s ability to maintain employment. JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
Supervisory Instrumentation Engineer III JT4 LLCSupervisory Instrumentation Engineer IIIEdwards AFB, California$125,000–$180,000 / yearREQUIREMENTS: A Bachelor of Science in engineering from an ABET-accredited academic institution and 4 years of related engineering experience, or an accredited Master of Science in engineering and a minimum of 2 years of related engineering experience, or an accredited doctorate degree in engineering are required for this position. JOB SUMMARY: The Supervisory Instrumentation Engineer III has the responsibility of modification, installation, testing, evaluation, repair, and documentation of airborne test instrumentation, data acquisition systems, as well as the supervision and administration of a section of engineers and technicians across multiple shifts.
NSTTC - Maintenance Scheduler III JT4 LLCNSTTC - Maintenance Scheduler IIIColorado Springs, Colorado$75,000–$107,000 / yearSome jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment. Update and maintain all maintenance records, MMERs (Maximo Maintenance Equipment Record), Job Plans, maintenance only asset records, corrective maintenance work orders, currently scheduled preventive maintenance work orders, etc.
Project Lead II - Armament JT4 LLCProject Lead II - ArmamentEdwards AFB, California$96,500–$130,000 / yearSome jobs may require a candidate to be eligible for a government security clearance, state-issued driver’s license or other licenses / certifications and the inability to obtain and maintain the required clearance, license or certification may affect an employee’s ability to maintain employment. The incumbent will be required to maintain, operate, and troubleshoot various F-22 test and support equipment, including store loading equipment, the Common Organizational Level Tester (COLT), Common Munitions BIT Reprogramming Equipment (CMBRE), and PASIS+.
Field Engineer - Indian Springs JT4 LLCField Engineer - Indian SpringsIndian Springs, Nevada$77,000–$110,000 / yearSome jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment. Equipment repair will require knowledge and use of test equipment such as signal generators, oscilloscopes, network analyzers, protocol analyzers, multimeters, transmission measuring sets, data analyzers, RF spectrum analyzers, and RF power meters.
Field Engineer III JT4 LLCField Engineer IIIEdwards AFB, California$96,491.20–$134,867.20 / yearThe potential candidate must possess a strong working knowledge of electronic systems and principles, including signal flow, circuit operation, fault isolation, and system-level troubleshooting down to the circuit board level utilizing specialized equipment such as a Huntron Tracker, Oscilloscope (O-scope), and multimeters. A Field Engineer III performs as a lead on more complex field engineering assignments and performs a variety of engineering assignments involving technology applications involved in the installation, operation, testing, and maintenance of complex electronic/mechanical equipment and systems.
RF Engineer JT4 LLCRF EngineerNorth Las Vegas, Nevada$91,000–$130,000 / yearSome jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license or other licenses/certifications, and the inability to obtain and maintain the required clearance, license or certification may affect an employee's ability to maintain employment. JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
Network Engineer JT4 LLCNetwork EngineerSalt Lake City, UtahA Bachelor of Science in Engineering from an ABET-accredited academic institution and eight (8) years of related engineering experience, or an accredited Master of Science in Engineering and a minimum of six (6) years of related engineering experience, or an accredited doctorate degree in engineering and a minimum four (4) years of related engineering experience are required for this position. Engineer Network Security: Engineer and implement network security baselines, including access control and firewall integration (e.g., Palo Alto, Juniper SRX, Cisco ASA), and architect the network routing infrastructure to support DoD Suite A/B encryption environments.
Navy Weapons Technician - MK45 Life Cycle EngineeringNavy Weapons Technician - MK45San Diego, CA$32–$39 / hourLife Cycle Engineering (LCE) is a privately held, employee-owned company with an emphasis on "doing the right thing the right way, which applies to the way we treat our customers and employees. Essential Functions and Responsibilities: Direct, oversee repair activities, train, troubleshoot, diagnose, and maintain the following: MK45 MOD 2 or MOD 4. MK38 MOD 2 or MOD 3. MK110 Gun Mounts.
Precision Weapons Technician CbPrecision Weapons TechnicianCamp Lejeune, North CarolinaWith on-site support at multiple locations worldwide, ProSol specializes in the core areas of Special Operations Planning & Support, Cyber Security & Information Technology, and Training & Education Services. Knowledge, Skills and Abilities: Able to obtain an operators’ license for non-tactical/tactical Government-owned equipment and be certified to transport AA&E.
Advanced Weapons Elevator Technician (Engineering Technician 3) - 27714 Huntington Ingalls Industries IncAdvanced Weapons Elevator Technician (Engineering Technician 3) - 27714Newport News, VA$52,708–$66,955.20 / yearIn this role, you'll work closely with both engineering and trades teams to provide shipyard support, with a primary focus on shipboard integration, troubleshooting, testing, and in‑service repair of CVN 78 Class Advanced Weapons Elevators-particularly for the CVN‑79 program. Performs detailed mathematical calculations using established formulas; preliminary analyses of data where guidelines are provided in such areas as trajectory adequacy, model dimensional consistency; and quantitative judgments concerning technical data.
Weapon Systems Technician CACI International IncWeapon Systems TechnicianJacksonville, FL$68,400–$143,700 / yearAs an integral part of our highly experienced and capable team, you will be supporting a vital role of our customers to ensure Navy fleet gun weapon systems capability, supportability, and readiness. Pay Range: There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications.
Field Engineer, Sr - GMD Weapons Systems (GWS) Lockheed Martin CorpField Engineer, Sr - GMD Weapons Systems (GWS)Huntsville, ALThe GMD Weapon System (GWS) processes data from multiple sensors to identify and characterize the inbound ballistic missile threat, plans the best defensive solution, and launches the intercepting missiles to negate the threat. Associate Certified Electronic Technician (CETs) certification or equivalent; or demonstrated experience with soldering, troubleshooting and testing in lieu of CET.
CIWS Weapon Systems Technician CACICIWS Weapon Systems TechnicianSan Diego, CaliforniaAs an integral part of our highly experienced and capable team, you will be supporting a vital role of our customers to ensure Navy fleet gun weapon systems capability, supportability, and readiness. Pay Range : There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications.
Aegis Weapon System (AWS) Aegis Computer Network Technician (ACNT) Trainer GD Information TechnologyAegis Weapon System (AWS) Aegis Computer Network Technician (ACNT) TrainerKnowledge of but not limited to - the Aegis Computer Networks to include, but not limited to Local Area Networks, Switch Blade Servers, Routers, Servers, VME Chassis Structure, Fiber Optics, and Digital Interfaces on the Aegis Baselines 7.2A, &.2B, 9.A and 9.C. Possess AWS/ACNT NECs V00C/V69A, V01C/V75A, V48A, V60A, V68A. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available.
NewDeputy Program Manager, Weapon System Integration (WSI) V2X IncDeputy Program Manager, Weapon System Integration (WSI)Indianapolis, INIn-Direct Leadership of Cross-Functional Teams: Manage and oversee a multidisciplinary team composed of engineers, program managers, technicians, and other functional roles to ensure successful execution of the portfolio programs and strategies. The PM will work closely with aviation customers across all service areas (USA, USAF, USMC, USN) and especially DoD Prime Contractors to ensure programmatic concerns are addressed in a timely manner and foster a strong working relationship.
Opportunities in support to AF ACC A2 ISR Peraton IncOpportunities in support to AF ACC A2 ISRFairchild AFB, WAFull timeWith Peraton's help, ACC maintains combat-ready forces for rapid deployment and employment to closely synchronize with Service Component Commands and the Joint Force, alongside the Intelligence Community (IC), to enable decision advantage to both warfighters and senior decision makers. Certification requirements vary based on skillset (DOD 8140 compliance, Computing certification for IT positions), Military Training for Intelligence related positions (i.e. JASSM TAM, DIA ITD train the trainer program etc.).
WEAPON SYSTEMS SPECIALIST (INSTRUCTOR) (Title 32) United States Air ForceWEAPON SYSTEMS SPECIALIST (INSTRUCTOR) (Title 32)WI$106,437–$138,370 / yearInstructs, evaluates or performs combat tactics, sensor employment, operational procedures of special operations forces, computer architecture and networking, computer software applications, data links, cryptological operations, C2 operations, multiple communications devices, airstack operations, coalition aircraft capabilities, and pilot/CSO cockpit-specific switches/checklists. Tasks may include wartime and peacetime day, night, and night vision assisted missions executing combat tactics and employment in all types of weather conditions including flight in mountainous terrain, threat systems engagement and avoidance, aerial reconnaissance, forward air control (aircraft), air-to-air and air to ground combat tactics, Combat Search and Rescue (CSAR), and remote landing sites.
CBA - Avionics Technician III (P-8) NTWP Pt Mugu, CA V2X IncCBA - Avionics Technician III (P-8) NTWP Pt Mugu, CACAWork typically requires an understanding of the interrelationships of circuits, exercising independent judgment in performing such tasks as making circuit analyses, calculating wave forms, and tracing relationships in signal flow, using complex test instruments such as high frequency pulse generators, frequency synthesizers, distortion analyzers, and complex computer control equipment. The Aircraft Electronics Technician III maintains assigned T/M/S aircraft electrical generators, load banks, starters, relays, batteries, actuators, circuit breakers, switches, weapons release and control checks, aircraft conventional weapons load team member, aircraft conventional weapons load team leader and aircraft instruments.
Armory Technician Bowhead / UIC Technical ServicesArmory TechnicianBremerton, WAArmory Technician (SWFPAC): Bowhead seeks an Armory Technician to as the technical and administrative authority for the storage, maintenance, and issuance of weapons and ammunition supporting the Strategic Weapons Facility Pacific (SWFPAC) and Marine Corps Security Force Battalion (MCSFBn) logistics department at Naval Base Kitsap, Bangor, WA. Issuing, distributing, receiving, and storing weapons and collateral equipment as required and conduct inventories on optics/sighting systems, and collateral equipment, IAW DOD, Marine, and Navy regulations and directives.
ArmorerEmergency Medical Technicians EMT OBMLS Specialist IIEMT DMS International LtdArmorerEmergency Medical Technicians EMT OBMLS Specialist IIEMTGulfport, MSIn addition, provides emergency medical treatment to sick or injured persons during the delivery of weapons-based courses of instruction (COI); determines nature and extent of illness or injury, and established procedures to be followed or need for additional assistance, basing decisions on statements of persons involved, examination of victim or victims, and knowledge of emergency medical practice; and administers prescribed medical treatment at site of emergency performing such activities as applying splints, administering oxygen, maintaining an adequate airway, treating minor wounds or abrasions, or performing cardio pulmonary resuscitation (CPR). • The Armorer/EMT can receipt, segregate, store, issue, inventory, sub-custody transfer, and sentence ammunition and explosives (AE); conduct motor vehicle inspections; certify Hazard Class 1 materials for transportation in motor vehicles; and can handle, process, store and transport range-related debris and Material Potentially Presenting an Explosive Hazard (MPPEH).
Aircraft Avionics Technician The Structures Company, LLCAircraft Avionics TechnicianMaxwell AFB, AL$35Performs maintenance, repair, inspection, fabrication, and modification of integrated conventional weapons systems, electronic and electro-mechanical components, fire control systems, electro-environmental systems, and their subassemblies. Troubleshoots integrated conventional weapons systems, electronic and electromechanical components, fire control systems, electro-environmental systems, subassemblies, Alternate Mission Equipment, and test equipment.
Aircraft Avionics Technician - DEFENSE The Structures Company, LLCAircraft Avionics Technician - DEFENSEMaxwell AFB, AL$35Performs maintenance, repair, inspection, fabrication and modification of integrated conventional weapons systems, electronic and electro-mechanical components, fire control systems, electro-environmental systems, and their subassemblies. Troubleshoots integrated conventional weapons systems, electronic and electromechanical components, fire control systems, electro-environmental systems, subassemblies, Alternate Mission Equipment, and test equipment.
Engineering Technician IV Jt4 LLCEngineering Technician IVLas Vegas, NVAn Engineering Technician IV provides support to the engineering and design staff through performing a variety of non-routine and complex assignments during the installation, maintenance, repair, troubleshooting, calibration, testing, fabrication, construction, and operation of diverse electronic/mechanical equipment and systems in accordance with engineering specifications. Employee will be responsible to perform the following functions/duties: Supports electronic transmitting and receiving equipment, digital and analog computers, industrial measuring and controlling equipment, microwave amplifiers and RF components, transmission lines, high- voltage power supplies and keying circuits, indicators and displays, and antenna positioning systems.
Experimental Ballistics Technician Bowhead / UIC Technical ServicesExperimental Ballistics TechnicianAberdeen, MDIndependently set up and prepare weapons, ammunition, and instrumentation for ballistic and check drawings provided by engineers and scientists to determine the adequacy of the drawings for fabrication and successful completion of the associated test. Advanced working knowledge of common laboratory equipment such as shop tools and machinery, equipment mounts, precision measurement tools, electronic sensors, communications cabling, and diagnostic tools such as oscilloscopes.
Electrical Fabrication Prototype Technician RTXElectrical Fabrication Prototype TechnicianTucson, ArizonaWe use state-of-the-art tools, processes, and technology, with capabilities encompassing a broad range of technical disciplines, including product engineering, manufacturing, technical services, materials engineering, analysis and test, rapid hardware development/builds and configuration and data management documentation. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
Arms, Ammunition, and Explosives (AA&E) Range Technician (OBMLS Specialist I) DMS InternationalArms, Ammunition, and Explosives (AA&E) Range Technician (OBMLS Specialist I)Gulfport, MSRelated tasks include, but are not limited to, housekeeping; grounds maintenance; preventive maintenance; inspecting; troubleshooting; repair; constructing and installing targets, target stands, barricades, and mock-ups; requisitioning, maintaining, and inventorying tools, equipment, and consumables; operating Small Arms Weapons Simulators (SAWS) and small arms ranges; operating motor vehicles, Material Handling Equipment (MHE), and Civil Engineering Support Equipment (CESE); and documentation of work performed. The AA&E Range Technician can issue, receipt, sub-custody transfer, inventory, ship, store and transport small arms, weapons, weapon mounts, SAWS, Visual Augmentation Systems (VAS), and other controlled inventory items.
Manufacturing Technicians - Multiple Shifts Available SIG SAUER IncManufacturing Technicians - Multiple Shifts AvailableJacksonville, ARToday, SIG SAUER is synonymous with industry-leading quality and innovation which has made it the brand of choice amongst the U.S. Military, the global defense community, law enforcement, competitive shooters, hunters, and responsible citizens. Must demonstrate proficient fine motor skills, ability to grip, reach, pull, turn, and use tools to torque fixtures in various machinery or in the assembly, machining, or testing of parts.