Project Engineer Amphenol TCSProject EngineerYocumtown, PennsylvaniaAmphenol Corporation is one of the world’s largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable. Amphenol Communications Solutions (ACS), a division of Amphenol Corporation, is a world leader in interconnect solutions for Communications, Mobile, RF, Optics, and Commercial electronics markets.
Senior Electrical Test Engineer Amphenol TCSSenior Electrical Test EngineerYocumtown, PennsylvaniaDiagnose failures; perform failure analysis and corrective actions of internal and customer test failures - including correlation analysis of customer findings to internal test data, it also includes working with mechanical and signal integrity test labs to facilitate failure analysis. Amphenol High Speed Products Group is the market leader for high speed, high bandwidth electrical connectors for the Telecom/Datacom market (Mobile Networks, Storage, Servers, Routers, Switches, etc.).
Mechanical Engineer Amphenol TCSMechanical EngineerYocumtown, PennsylvaniaActively collaborate with product designers on design reviews, component testing, qualification, and introduction of new mechanisms, including derivatives that address market demands for improved alignment and durability; participate in quality investigations to ensure mechanism specifications are met. Design and develop mechanisms for connector alignment, including guide pins, bearings, springs and structural components made from steel and aluminum, ensuring reliability under misalignment conditions and performing failure analysis on defects from customer applications and manufacturing processes.
Electrical Engineer Chemours CoElectrical EngineerNewark, DE$110,544–$172,725 / yearThe 340 scientists, engineers, and technicians at the site work in 130 laboratories, an electrical cable prototyping line, and 15 chemical process enclosures/barricades that provide 320,000 square feet of space for research and development, technical service, and manufacturing support of Chemours businesses. The Chemours Newark Area Technology organization is seeking to engage an Electrical Engineer to support collaborative R&D projects, Pilot Operations, and Facility Management activities at three Chemours sites in the greater Newark, DE, area.
NewSenior Electrical Engineer Power Systems Shermco Industries IncSenior Electrical Engineer Power SystemsWyomissing, PAThis position will serve as both a technical lead and client-facing engineering advisor responsible for developing electrical infrastructure solutions, leading projects, mentoring junior engineers, and helping customers improve the reliability, safety, and performance of their power systems. Shermco is seeking a Senior Electrical Engineer with extensive experience designing and upgrading medium voltage electrical distribution systems for industrial, commercial, healthcare, pharmaceutical, and mission-critical facilities.
Lead Substation Electrical Engineer PEAK Technical StaffingLead Substation Electrical EngineerReading, PA$69.85–$84.56 / hourPerform substation grounding calculations and studies, lightning protection and insulation coordination, lighting, bus calculations, transformer and bus sizing calculations, fault calculations, and AC and DC auxiliary system sizing calculations. Ideal candidate should have strong interpersonal and written communication skills that permit working efficiently alongside other senior substation engineers and designers in a team setting.
Product Engineer Amphenol TCSProduct EngineerYocumtown, PennsylvaniaBe responsible for the successful transition of products and processes from NPI phase to volume manufacturing into low-cost regions and regular interfacing with NPI and manufacturing engineering groups at the connector manufacturing facilities globally. Actively participate / integrate with product designers in support of design reviews, component and product testing and qualification, and introduction of new products including product derivatives supporting market demands.
Mechanical Engineer II 4 Corner ResourcesMechanical Engineer IIYork, PACustom engineering design experience involving wind turbines, turbine generators, gas turbines, or related equipment within the energy sector. The Engineer 2 may serve as the lead engineer for smaller projects and perform component engineering for rehabilitation projects and new components.
Structural Bridge Engineer I - Pennsylvania Parsons CorpStructural Bridge Engineer I - PennsylvaniaHarrisburg, PA$63,600–$111,300 / yearPerform structural analysis and design for new and existing bridges and related structures (abutments, piers, retaining walls, culverts, sign and signal structures) in accordance with: PennDOT Design Manual 4 (DM-4). Provide clear, organized input and technical guidance to CAD designers/drafters and junior engineers to develop PennDOT-compliant contract plans, including: Plan, elevation, and section sheets.
Field Application Engineer- Southwest Ametek, Inc.Field Application Engineer- SouthwestNewark, DE$90,000–$120,000 / yearCollaborate with other Field Applications Engineers and Support Engineers to test workflows, solve problems, and share knowledge, including documenting workflows to share globally both for internal and external use. We give quality teams, production teams, maintenance teams, and designers the certainty to manufacture and design like never before - transforming 3D measurements into smarter decisions and endless possibilities.
Electrical Engineer LuxusElectrical EngineerReading, PA$90,000–$145,000 / yearKeywords: Electrical Engineer, MEP Design, Power Distribution, Lighting Design, Fire Alarm Design, Revit Electrical, AutoCAD, PE License, EIT, Wyomissing PA Jobs, Building Systems Engineering, Low-Voltage Systems, Consulting Engineering, Healthcare Design, AEC Industry. In this role, you will do more than manage power distribution; you will be a technical visionary, integrating sophisticated electrical, lighting, and low-voltage systems for the facilities that power our communities—from cutting-edge healthcare centers to modern educational institutions.
MEP Engineer Hershey Entertainment & Resorts CompanyMEP EngineerHershey, PAFull timeBending Occasional (Stooping Occasional (Climbing Ladders Occasional (Climbing Stairs Occasional (Lifting Occasional (This job requires the visual ability to perform detailed work at close distances (computer screens, accounting ledgers, using measurement devices). Our team members share a common goal of upholding the legacy of our founder, Milton S. Hershey, while striving to live by our company's Core Values: Devoted to the Legacy, Selfless Spirit of Service, Team Focused, and Respectful of Others.
NewSenior Materials Engineer - Magnetics - Lancaster, PA Michael Page InternationalSenior Materials Engineer - Magnetics - Lancaster, PALancaster, Pennsylvania$120,000–$140,000 / yearFull timeDevelop and optimize advanced permanent magnet material formulations, with a particular focus on rare-earth magnetic materials. The Successful ApplicantBachelor's degree in Materials Science, Manufacturing Engineering, Industrial Engineering, Physics, or a related technical discipline.
Transportation Engineer GpacTransportation EngineerHarrisburg, PA80000–110000GPAC (Growing People and Companies) is an award-winning search firm specializing in placing quality professionals within multiple industries across the United States since 1990. This opportunity offers clear career progression, strong mentorship, and leadership visibility , with the ability to grow into project management and long-term leadership or partnership roles.
NewElectrical Construction Quality Engineer (Qa/Qc) Eaton CorporationElectrical Construction Quality Engineer (Qa/Qc)red lion, PARemote$97,000–$143,000 / yearExperience overseeing quality control activities for electrical installation, testing, commissioning, and energization of power distribution systems and equipment, including one or more of the following: substations, switchgear, transformers, MCCs, panelboards, protective relays, grounding systems, cabling, raceways, or control systems. This role works closely with project managers, field supervision, EHS/safety personnel, owners/customers, subcontractors, vendors, and commissioning teams to ensure high-quality, safe, and efficient delivery of electrical construction.
MANUFACTURING ENGINEER TE Connectivity plcMANUFACTURING ENGINEERMiddletown, PA$84,300–$105,300 / yearAs a trusted innovation partner, our broad range of connectivity and sensor solutions enable the distribution of power, signal and data to advance next-generation transportation, energy networks, automated factories, data centers enabling artificial intelligence, and more. All legitimate job openings are posted exclusively on our official careers website at te.com/careers, and all email communications from our recruitment team will come only from actual email addresses ending in @te.com.
Structural Design Engineer (Civil/Truss) Illinois Tool WorksStructural Design Engineer (Civil/Truss)Any City, PA$70,000–$100,000 / yearWhy This Role Matters: This Structural Design Engineer role is essential because it sits at the intersection of engineering precision, construction efficiency, and customer success-directly impacting how safely and effectively buildings are designed and constructed. As a Structural Design Engineer at Alpine, you help translate complex engineering principles into practical, buildable solutions that optimize material use, improve productivity, and ensure structural integrity.
Electrical Test Engineer Amphenol TCSElectrical Test EngineerYocumtown, PennsylvaniaDiagnose failures; perform failure analysis and corrective actions of internal and customer test failures - including correlation analysis of customer findings to internal test data, it also includes working with mechanical and signal integrity test labs to facilitate failure analysis. Amphenol Corporation is one of the world’s largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable.
Power Integrity Engineer Amphenol TCSPower Integrity EngineerYocumtown, PennsylvaniaAmphenol High Speed Products Group is the market leader for high speed, high bandwidth electrical connectors for the Telecom/Datacom market (Mobile Networks, Storage, Servers, Routers, Switches, etc.). Amphenol Corporation is one of the world’s largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable.
General Engineer - Substation Electrical Exelon CorpGeneral Engineer - Substation ElectricalNewark, DEWe are a Fortune 200 company, 20,000 colleagues strong serving more than 10.7 million customers at six energy companies -- Atlantic City Electric (ACE), Baltimore Gas and Electric (BGE), Commonwealth Edison (ComEd), Delmarva Power & Light (DPL), PECO Energy Company (PECO), and Potomac Electric Power Company (Pepco). (4) Career related experiences is defined as changes in technical job responsibilities and does not have to include a change in department Note: Items (1) and (3) are mutually inclusive, whereby the maximum experience requirement reduction is one(1) year (e.g., in the case of an employee with both a master's degree in Engineering AND a PE license, the minimum experience requirement would be reduced by one (1) year).
Staff Engineer, Quality Coherent CorpStaff Engineer, QualityNewark, DEWe are a vertically integrated manufacturing company that develops innovative products for diversified applications in the industrial, optical communications, military, life sciences, semiconductor equipment, and consumer markets. Coherent provides a comprehensive career development platform within an environment that challenges employees to perform at their best, while rewarding excellence and hard-work through a competitive compensation program.
Lead Electrical Engineer-Electrical & Instrumentation Pixelle Specialty SolutionsLead Electrical Engineer-Electrical & InstrumentationSpring Grove, PAProvide power systems expertise and engineering acumen that includes industry accepted best practices, design, troubleshooting, and operations support of turbine generators and auxiliary systems, excitation systems, high-voltage (13.8 kV) power distribution systems, digital (Schweitzer) and electro-mechanical relay protection, main transmission lines (MET1 and MET2) maintenance, electrical maintenance of busses and breakers, arc flash analysis, programmable logic controllers, distributed control systems, low and medium voltage power distribution systems and infrastructure, AC and DC drives, and process control systems. Engineering, working knowledge and troubleshooting insight of power generation equipment, distribution systems up to 13.8 kV, digital (Schweitzer) and electromechanical relay protection, electrical maintenance of busses, breakers, and main transmission lines (MET1 and MET2) into the plant, AC & DC drives, arc flash studies and compliance, and DCS and PLC systems (programming is not required).
Principal Engineer – Connector Reliability Amphenol TCSPrincipal Engineer – Connector ReliabilityYocumtown, PennsylvaniaAmphenol Corporation is one of the world’s largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable. Provide guidance on reliability-impacting manufacturing processes plating thickness, assembly torque, housing material selection and collaborate with quality and manufacturing teams to ensure process controls support reliability targets.
Senior Materials Engineer Michael Page InternationalSenior Materials EngineerLancaster, Pennsylvania$120,000–$130,000 / yearFull timeSenior Materials EngineerOur client is a leading manufacturer of high-performance permanent magnet materials serving aerospace, defense, medical, energy, and industrial markets. They are seeking a Senior Materials Engineer to support new material development, process innovation, and manufacturing optimization efforts within a highly technical production environment.
Senior Piping Stress Engineer KBR IncSenior Piping Stress EngineerNewark, DEThese include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets. • Assist in conducting piping reviews of all project isometrics, supports, and specialty items prior to issuing for construction to ensure that quality procedures were followed.
Quality Engineer MedTec, LLCQuality EngineerAvondale, PAFull timeThis role serves as the primary quality partner to Manufacturing, Manufacturing Engineering, Sustaining Engineering, Research & Development, and Supply Chain teams to identify and mitigate quality risks, improve process performance, reduce cost of poor quality, and ensure compliance with applicable regulatory and quality system requirements. The Quality Engineer provides technical leadership for nonconformance investigations, process validation activities, quality planning, inspection strategies, statistical analysis, and manufacturing quality improvement initiatives throughout the product lifecycle.
Manufacturing Project Engineer Amphenol TCSManufacturing Project EngineerYocumtown, PennsylvaniaAmphenol Corporation is one of the world’s largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable. Amphenol Communications Solutions (ACS), a division of Amphenol Corporation, is a world leader in interconnect solutions for Communications, Mobile, RF, Optics, and Commercial electronics markets.
Advanced Materials and Technology Engineer Amphenol HSIOAdvanced Materials and Technology EngineerYocumtown, PennsylvaniaAmphenol High Speed Products Group is the market leader for high speed, high bandwidth electrical connectors for the Telecom/Datacom market (Mobile Networks, Storage, Servers, Routers, Switches, etc.). 5+ years of industry experience in materials development, materials engineering, or advanced manufacturing, with hands-on experience working with both polymer/plastic materials and metallic materials (preferably within the electronics, connector, interconnect, or metal manufacturing industries).
NewSenior Cyber Security Systems Engineer Shiftcode Analytics, IncSenior Cyber Security Systems EngineerReading, PAWe are seeking a hands-on Systems Engineer – Cybersecurity to join a growing cybersecurity engineering team supporting enterprise security technologies across cloud, endpoint, network, identity, and infrastructure environments. This role will focus on securing cloud environments, enhancing security platforms, supporting security architecture initiatives, and driving cybersecurity improvements across multiple technology domains.
Sr Engineer ExelonSr EngineerNewark, DEEvaluates complex technical issues that require highly specialized knowledge in very specific areas and recommends actions or programs for their resolution, which may necessitate the review/evaluation of engineering design documents: + Evaluates, develops, implements, and leads projects that have significant financial and operational impact, may also develop initial commissioning plans. We are a Fortune 200 company, 20,000 colleagues strong serving more than 10.7 million customers at six energy companies -- Atlantic City Electric (ACE), Baltimore Gas and Electric (BGE), Commonwealth Edison (ComEd), Delmarva Power & Light (DPL), PECO Energy Company (PECO), and Potomac Electric Power Company (Pepco).
Civil Engineer - Land Development GpacCivil Engineer - Land DevelopmentLancaster, PA85000–125000In this role, you'll contribute to projects from the early planning stages through final design, working closely with clients, regulatory agencies, and internal team members to develop practical and efficient engineering solutions. GPAC (Growing People and Companies) is an award-winning search firm specializing in placing quality professionals within multiple industries across the United States since 1990.
Manufacturing Process Engineer Amphenol TCSManufacturing Process EngineerYocumtown, PennsylvaniaAmphenol Corporation is one of the world’s largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable. Amphenol Communication Solutions, a division of Amphenol, is the market leader for high speed, high bandwidth electrical connectors for the Telecom/Datacom market (Mobil Networks, Storage, Servers, Routers, Switches, etc.).
Senior Civil Engineer - Geotech Engineering and Construction Material Testing PennoniSenior Civil Engineer - Geotech Engineering and Construction Material TestingNewark, DelawareThis position requires an in-person presence based out of our Newark, DE, Office and will also interact with projects and personnel throughout Pennoni's geographic footprint. preparation, performing and overseeing our Geotechnical Engineering services, preparing geotechnical reports, and.
Engineer (Civil/Structural - Trussteel) Illinois Tool WorksEngineer (Civil/Structural - Trussteel)Any City, PA$70,000–$95,000 / yearAdditionally, by providing technical input for software development and supporting customers with consultative guidance, it strengthens Alpine's reputation as an industry leader while advancing innovation and continuous improvement across the construction sector. Why This Role Matters: This Engineer role is critical to Alpine's mission of delivering high-quality software solutions and engineering services that improve productivity and profitability for component manufacturers.
Concrete Accessories Field Sales Engineer Illinois Tool WorksConcrete Accessories Field Sales EngineerAny City, PA$100,000–$110,000 / yearITW Commercial Construction North America (CCNA), a division of ITW, includes trusted brands like Buildex (Teks, Sammys), Red Head (TruBolt, Tapcon), Ramset (Trakfast), and PNA, serving professional contractors since 1910. Primary Responsibilities: Develops professional relationships with key architectural & engineering firms in PNA targeted markets, utilizing engineering expertise to drive and influence product specification.
Lead Customer Engineer - Power Solutions Amphenol TCSLead Customer Engineer - Power SolutionsYocumtown, PennsylvaniaAmphenol Corporation is one of the world’s largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable. Amphenol Communications Solutions (ACS), a division of Amphenol Corporation, is a world leader in interconnect solutions for Communications, Mobile, RF, Optics, and Commercial electronics markets.
Mechanical Design Engineer Amphenol TCSMechanical Design EngineerYocumtown, PennsylvaniaAmphenol High Speed Products Group is the market leader for high speed, high bandwidth electrical connectors for the Telecom/Datacom market (Mobile Networks, Storage, Servers, Routers, Switches, etc.). Bonus Skills: Familiarity with Data Center Infrastructure, such as: Rack and Chassis design; Blade and rack server configurations; Switches, routers, and network topologies; Power distribution units (PDUs) and UPS systems; server and switch assembly, integration, and validation.
Engineer, Sr Safety Analysis Constellation EnergyEngineer, Sr Safety AnalysisOxford, PA$122,400–$154,000Perform other job assignments and duties as directed by management or pursuant to company policy, including but not limited to emergency response, departmental coverage, call outs, and support of outage activities in positions outside the department. Now integrated with Calpine, our portfolio includes 55 gigawatts of capacity from nuclear, natural gas, geothermal, hydro, wind and solar facilities, with the generating capacity to power the equivalent of 27 million homes.
Engineer, Electrical Constellation EnergyEngineer, ElectricalDarlington, MD$87,000–$154,000Perform other job assignments and duties as directed by management or pursuant to company policy, including but not limited to emergency response, departmental coverage, call outs, and support of outage activities in positions outside the department. Now integrated with Calpine, our portfolio includes 55 gigawatts of capacity from nuclear, natural gas, geothermal, hydro, wind and solar facilities, with the generating capacity to power the equivalent of 27 million homes.
NewEngineer, Structural Constellation EnergyEngineer, StructuralElk Mills, MD$92,700–$114,000Perform other job assignments and duties as directed by management or pursuant to company policy, including but not limited to emergency response, departmental coverage, call outs, and support of outage activities in positions outside the department. Now integrated with Calpine, our portfolio includes 55 gigawatts of capacity from nuclear, natural gas, geothermal, hydro, wind and solar facilities, with the generating capacity to power the equivalent of 27 million homes.
NewEngineer, Digital Relay Design Constellation EnergyEngineer, Digital Relay DesignWest Grove, PA$87,000–$154,000Perform other job assignments and duties as directed by management or pursuant to company policy, including but not limited to emergency response, departmental coverage, call outs, and support of outage activities in positions outside the department. Now integrated with Calpine, our portfolio includes 55 gigawatts of capacity from nuclear, natural gas, geothermal, hydro, wind and solar facilities, with the generating capacity to power the equivalent of 27 million homes.
NewEngineer, Mechanical Constellation EnergyEngineer, MechanicalOxford, PA$92,700–$154,000Perform other job assignments and duties as directed by management or pursuant to company policy, including but not limited to emergency response, departmental coverage, call outs, and support of outage activities in positions outside the department. Now integrated with Calpine, our portfolio includes 55 gigawatts of capacity from nuclear, natural gas, geothermal, hydro, wind and solar facilities, with the generating capacity to power the equivalent of 27 million homes.
NewEngineer, Electrical I & C Constellation EnergyEngineer, Electrical I & CChristiana, PA$92,700–$154,000Perform other job assignments and duties as directed by management or pursuant to company policy, including but not limited to emergency response, departmental coverage, call outs, and support of outage activities in positions outside the department. Bachelor&rsquos degree in Engineering (Chemical, Civil/Structural, Electrical, Industrial, Mechanical or Nuclear) with 5 years of nuclear experience or related engineering experience.
Engineer, Electrical / I & C Constellation EnergyEngineer, Electrical / I & CElverson, PA$87,000–$154,000Perform other job assignments and duties as directed by management or pursuant to company policy, including but not limited to emergency response, departmental coverage, call outs, and support of outage activities in positions outside the department. Now integrated with Calpine, our portfolio includes 55 gigawatts of capacity from nuclear, natural gas, geothermal, hydro, wind and solar facilities, with the generating capacity to power the equivalent of 27 million homes.
Structural Engineer Constellation EnergyStructural EngineerCornwall, PA$87,000–$154,000Perform other job assignments and duties as directed by management or pursuant to company policy, including but not limited to emergency response, departmental coverage, call outs, and support of outage activities in positions outside the department. Now integrated with Calpine, our portfolio includes 55 gigawatts of capacity from nuclear, natural gas, geothermal, hydro, wind and solar facilities, with the generating capacity to power the equivalent of 27 million homes.
Engineer, Mechanical or Civil / Structural Constellation EnergyEngineer, Mechanical or Civil / StructuralElk Mills, MD$92,700–$154,000Now integrated with Calpine, our portfolio includes 55 gigawatts of capacity from nuclear, natural gas, geothermal, hydro, wind and solar facilities, with the generating capacity to power the equivalent of 27 million homes. Bachelor&rsquos degree in Engineering (Chemical, Civil/Structural, Electrical, Industrial, Mechanical or Nuclear) with 5 years of nuclear experience or related engineering experience.
Manufacturing IT Support Engineer Tata Consultancy Services LtdManufacturing IT Support EngineerPA$90,000–$100,000 / yearWorking experience in "ServiceNow" and knowledge on Incident, Problem, Change, SLM and Knowledge Management processes. Coordinate communications between suppliers, OEM, and business stakeholders for their particular area.
Product Engineer - Nuclear & Outsourced Battery Support EnerSysProduct Engineer - Nuclear & Outsourced Battery SupportReading, PAThe position supports nuclear-related battery requirements, outsourced lead-acid battery programs, European Battery Regulation-related design responsibilities, drafting activities, ERP support, and cross-functional technical execution. This role provides engineering support to ensure continued compliance, product reliability, documentation accuracy, and effective technical coordination for business areas with high complexity, growth potential, and liability exposure.
System Engineer The Wenger GroupSystem EngineerLancaster, PAThis position requires a hands-on technical leader who can solve complex problems, implement best practices, and support business growth by maintaining a resilient IT infrastructure. This role ensures all core IT systems' high availability, performance, and security, including servers, virtualization platforms, storage, cloud environments, and enterprise applications.
Quality Engineer GTT, LLCQuality EngineerNewark, DEReview and approve routine to moderately complex ECO's, product-related change orders, engineering studies, sustaining engineering products, specifications, drawings, manufacturing procedures, design process verification, and validation documentation. Provide quality engineering support to Operations, Engineering, and R&D in the design and manufacture of medical devices to ensure robust product builds and the production of high-quality products and manufacturing practices.