FULL_TIME

FEED

UNKNOWN

Our Values: You are only crazy if you are wrong, it’s ok to be wrong Lead with Compassion Be Resourceful Listen Hustle Who We Are Looking For: Phoenix Tailings is looking for a Senior Manufacturing Engineer to take technical ownership of complex manufacturing processes, equipment, and scale-up efforts at our Exeter facility. Qualifications: Bachelor's or Master’s degree in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering, Chemical Engineering, Materials Engineering, or a related technical discipline.

Phoenix Tailings

4.2. Senior Manufacturing Engineer

lever_via_bold

Hypertherm Associates , the world leader in industrial cutting solutions and a global, 100% Associate-owned company, is seeking a newly graduated Mechanical Engineer to join our team! Lead cost-reduction and product-improvement initiatives through design updates, engineering analysis, prototype development, verification and validation testing, and contributions to business cases.

Hypertherm Associates

Mechanical Engineer

Amphenol Corporation is one of the world's largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable. The Twin-Ax Cable Product Engineer is the technical owner for high-speed copper cable assemblies, responsible for ensuring mechanical reliability, electrical performance, manufacturability, and long-term product integrity.

Amphenol Communications Solutions

Twin-Ax Cable Product Engineer

Ardent's patented contact technologies are well suited for advanced multi-GHz applications such as board stack connectors, coaxial connectors, FPGA sockets, flex circuit connectors, probe interfaces, and mezzanine card connectors. Amphenol Corporation is one of the world's largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable.

R&D Engineer

Typical functions of this position include support and continuous improvement of CMM measurement processes; analysis and resolution of manufacturing scrap issues; creation and support of work instructions, programs, and gauging; and analysis. A career at Timken means you can have an immediate impact doing Work That Matters to the world- improving the efficiency of todays industrial equipment and preparing for the future of motion on our planet and beyond.

The Timken Co

Quality Engineer

Our Values: You are only crazy if you are wrong, it’s ok to be wrong Lead with Compassion Be Resourceful Listen Hustle Who We Are Looking For: Phoenix Tailings is looking for a Manufacturing Engineer II who can take meaningful ownership of manufacturing processes, equipment, and production improvements as we scale critical metals production. Qualifications: Bachelor's or Master’s degree in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering, Chemical Engineering, Materials Engineering, or a related technical discipline.

4.4. Manufacturing Engineer II

How You Will Make an Impact as a Manufacturing Engineer: Develop and maintain essential manufacturing documentation including Bills of Materials (BOMs), line layouts, assembly instructions, fixtures, pFMEAs, and production control methods. This is a critical, cross-functional role that collaborates internally with engineering, supply chain, and operations teams, as well as externally with suppliers, partners, and customers.

DEKA Research & Development

Manufacturing Engineer - Mid-Level

ea_via_bold

Our Values: You are only crazy if you are wrong, it’s ok to be wrong Lead with Compassion Be Resourceful Listen Hustle Who We Are Looking For: Phoenix Tailings is looking for a Manufacturing Engineer I who is excited to turn innovative process technology into reliable, repeatable, and scalable manufacturing operations. 0–3 years of experience in manufacturing, process engineering, production engineering, equipment engineering, or a related hands-on engineering environment; relevant internships, co-ops, laboratory, or project experience are welcome.

4.6. Manufacturing Engineer I

Our suite spans Computer-Aided Dispatch (CAD), Records Management (RMS), Mobile, and Jail Management - a fully integrated platform designed to keep officers informed, connected, and safe in the field. The Software Engineer will work with colleagues to deliver reliable and scalable applications that contribute to keeping first responders in the field safe, efficient, and informed with mission-critical technology that is intuitive and easy to use.

YEAR

Harris Computer Systems

Software Engineer

Today, SIG SAUER is synonymous with industry-leading quality and innovation which has made it the brand of choice amongst the U.S. Military, the global defense community, law enforcement, competitive shooters, hunters, and responsible citizens. Responsibilities include troubleshooting and resolving production and functional issues at assembly and range, implementing design improvements, and coordinating changes with cross-functional teams such as Quality, Operations, and R&D.

SIG SAUER Inc

Sustaining Engineer II

The position relies heavily on knowledge of fiber optic components (including lasers, amplifiers, modulators, OCM, WSS, couplers, filters, WDMS, isolators, Photodiodes, receivers, optical connectors) as well as optics, fiber optics, direct and coherent detection, OTDRs, optical testing methods, reliability, and computer control of devices and instrumentation. The Senior Optical Design Engineer is an established and experienced contributor on a team of outstanding engineers that research, develop, design, test, and transfer to manufacture our next generation of high-reliability opto-electronic network elements including monitoring and telemetry terminal equipment, as well as undersea repeaters, branching units and ROADMs.

Subcom, LLC

Senior Optical Design Engineer (6977)

About BAE Systems Electronic Systems BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. Requirements Validation: Ensure internal and external product requirements are understood, validated, and properly traced to design, implementation, and testing and support qualification testing inclusive of system test set-up conformity, test monitoring, and review of qualification test reports and failure investigation reports.

BAE Systems Plc

Design Quality Engineer - Hardware

Working in a team environment, the Supplier Quality Engineer I will collaborate with cross functional teams including Design Engineers, Manufacturing, internal Quality, Project Management, Production Planning, Incoming Inspection, Purchasing as well as outside manufacturing and OSP suppliers. The duties of this job normally require exposure to a typical manufacturing area where frequent standing, sitting, stooping/squatting, walking and stair climbing can be expected along with frequent lifting and/or moving of tooling, parts, containers, and materials up to 40 pounds.

SIG SAUER Careers

Supplier Quality Engineer I

The successful Automation Engineer should have the following qualifications: Bachelor's degree is preferred with 5+ years of relevant experience. Collaborate with engineers and technical staff to implement procedures, address malfunctions, and provide technical support.

Michael Page is one of the world's leading professional recruitment consultancies, specializing in the placement of candidates in permanent, contract, temporary and interim positions with clients around the world.

Our business was established in Canada in 2005 when we opened our Toronto office. Our role is to work with employers and job seekers to facilitate a successful match. This can range from advising a global company on a candidate sourcing strategy to helping a job seeker find their dream job.
 
In Canada, we focus on recruiting for the following areas:
 
Banking and financial services 
Digital and e-commerce
Engineering and manufacturing
Finance and accounting 
Human resources 
Information technology
Marketing 
Oil and gas 
Procurement and supply chain 
Property and construction
Sales 

An Established Brand
The Group has established a leading presence in many of the key markets for professional recruitment around the world and has positioned itself in certain other markets, which offer the opportunity for future growth. Within its current largest markets, Michael Page has also built a regional presence, including in the UK, France and Australia. Consequently, the Michael Page brand is among the most widely recognized brands in the professional recruitment industry.
 
A Market Leader
The role of a recruitment consultancy is to act as an intermediary, identifying and sourcing suitably qualified candidates on behalf of its clients. Candidates are recruited either for permanent or contract positions (typically for a fixed term) or on a temporary basis. Within the overall recruitment industry, the market for professional recruitment services is a specialist sector which has developed more recently. Michael Page is widely recognized as leading the development of this market around the world.
 
Learn the benefits of working with Michael Page yourself. Submit your resume or contact a Michael Page recruitment consultant today.

Michael Page International

Automation Engineer - Industrial Manufacturing - Claremont, NH

Candidate will provide electrical engineering support to a dynamic engineering development team, leading first unit test, design verification test, integration and transition to production tasks on complex digital circuit cards and modules. As one of the most geographically diverse international defense companies, we deliver a full range of products and services spanning air, land, maritime, space, and cyber, including advanced electronics, intelligence solutions, and dedicated customer support.

Digital Hardware Engineer

Amphenol High Speed Products Group is the market leader for high speed, high bandwidth electrical connectors for the Telecom/Datacom market (Mobile Networks, Storage, Servers, Routers, Switches, etc.). Significant participation in automation design, working directly with the NPI and Machine Design (automation) teams to ensure the product design can be built in high volume, efficiently, and with the highest of quality.

Senior Product Development Engineer

The Senior Automation Engineer works under the direction of the Senior Automation Manager while also utilizing independent judgment to perform the day-to-day project duties of designing, developing, and implementing control systems. Experience with FactoryTalk Historian database or OSI PI: installation and setup, backup, security configuration, configuration of points and ability to monitor performance and troubleshoot networking issues.

PCI Services

Sr. Automation Engineer

Our unique set of capabilities lend themselves to highly complex systems and products, and we offer customers a range of services including product and systems design, automation, fabrication, assembly, and large volume contract manufacturing. Our acquired businesses are grounded in build-to-print and by-the-hour engineering and design services, and we're leveraging their combined expertise to migrate to increasingly sophisticated program development and production, as well as the generation of our own products.

Re:Build Manufacturing, LLC

Senior Controls Engineer

Senior Mechanical Engineer

Who We’re Looking For: As a key member of the PLM Engineering team, the Mechanical Engineer will be responsible for key engineering activities to support ongoing improvements and maintenance of the current product lines in the Laborie Portfolio. This includes aspects including product and component design, material selection, customer and product specification development, packaging design, and other product development activities in support of revenue, quality, production, and cost reduction goals.

Services Manager Jobs in Maryland

4.2. Senior Manufacturing Engineer Phoenix Tailings

Mechanical Engineer Hypertherm Associates

Twin-Ax Cable Product Engineer Amphenol Communications Solutions

R&D Engineer Amphenol Communications Solutions

Quality Engineer The Timken Co

4.4. Manufacturing Engineer II Phoenix Tailings

Manufacturing Engineer - Mid-Level DEKA Research & Development

4.6. Manufacturing Engineer I Phoenix Tailings

Software Engineer Harris Computer Systems

Sustaining Engineer II SIG SAUER Inc

Senior Optical Design Engineer (6977) Subcom, LLC

Design Quality Engineer - Hardware BAE Systems Plc

Supplier Quality Engineer I SIG SAUER Careers

Automation Engineer - Industrial Manufacturing - Claremont, NH Michael Page International

Digital Hardware Engineer BAE Systems Plc

Senior Product Development Engineer Amphenol Communications Solutions

Sr. Automation Engineer PCI Services

Senior Controls Engineer Re:Build Manufacturing, LLC

Senior Mechanical Engineer Re:Build Manufacturing, LLC

Mechanical Engineer Laborie Medical Technologies Corp

Similar Job Searches

Stand out to leading employers.