UNKNOWN

FEED

To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Firefly offers outstanding benefits for our employees, including generous health, dental and vision plans with low plan deductibles, parental leave, relocation benefits, educational reimbursement, short term disability, and flexible PTO options.

Firefly Aerospace Inc

Component & Sub-Assembly Technician

linkup_via_bold

License Required Yes Job Locations US-TX-Buda Company Overview IES is a national provider of industrial products and infrastructure services to a variety of end markets, including electrical, mechanical and communications contracting solutions for the commercial, industrial, residential and renewable energy markets. General Job Description Position Overview The Resdiential Electric Technician is an experienced residential electrician responsible for performing electrical installation, service, troubleshooting, and repair work while providing leadership and technical guidance to residential rough-in crews.

IES Holdings Inc

Residential Electric Technician

If you're equipped with Basic Safety Training (BST), Basic Technical Training (BTT), and Advanced Rescue Training (ART) certifications from the Global Wind Organization (GWO), consider yourself already one step ahead! Ability to observe training and obtain certification in required safety programs that include LOTO, Electrical Qualification, Fall Arrest & High Angle Rescue & Emergency Decent, and Confined Space.

HOUR

Vestas Wind Systems AS

Regional Traveling Technician II - 100% Travel - South US

Starlink Gateways are advanced ground stations antennas that are responsible for delivering internet from the ground to satellites - they must be high-precision, low-cost, high-performance in all weather conditions (from the Arctic Circle to the desert), and ultra-reliable over long periods of time. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Space Exploration Technologies Corp

Production Technician, Gateways Starlink

This is a hands-on technical role for someone passionate about building their career in aerospace propulsion testing and working directly with liquid propulsion systems supporting the Blue Ghost lunar lander program. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

Spacecraft Test Technician IV

Training and/or experience in basic operation of an oscilloscope, multimeter, soldering wires & connectors, wire stripping, ohm's law, continuity testing, drilling & tapping holes, torque wrenches, DC power supplies, tape measures. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

Environmental Test Technician III, (2nd Shift)

Responsibilities include new test stand build, and test site upgrades, stand verification and commissioning, test article install, troubleshooting, verification and testing activities associated with all components of the rocket. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

GSE Technician II

Two or more years of experience in one or more of the following fields:Military Avionics/Electrician MOSArmy 15F, 15YNavy AT, ETMarine 63 and 64 seriesAirforce 2A6X6Coast Guard AETRocket engines, turbomachinery or complex component assemblyCivilian/military aircraft engine experience. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

Vehicle Integration Technician II

Spacecraft Test Technician II

We provide reliable and fast internet to tens of millions of users worldwide, including populations with little or no connectivity, rural communities, aircraft, watercraft, and places where existing services are unreliable, too expensive, or disconnected by natural disasters. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Production Test Technician Starlink

To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Rocket engines, turbomachinery, or complex component assemblyTroubleshooting/Repairing/Testing of pneumatic and/or cryogenic valves, fluid systems, actuators, or components.

Vehicle Integration Technician III

This work primarily includes receiving and preparing incoming jobs, verifying parts and documentation, cleaning and marking hardware, performing prep-level assembly steps, and staging work for assignment to the manufacturing production team. Firefly Manufacturing Prep Technician works closely with Manufacturing, Planning, Warehouse, and Manufacturing Engineering teams to ensure incoming work is fully prepared and ready for production according to established instructions and production requirements.

Components Manufacturing Prep Technician

Initiates and performs most work tasks with limited supervision and follows defined instructions and maintenance schedules, completing plans as directed and performs according to written and verbal instruction from higher level technical staff. Visibly supports and promotes team spirit and collaboration, supports change initiatives and looks for improvement opportunities to job-appropriate processes and procedures while communicating through appropriate channels to implements improvements using the appropriate control management protocol.

Traveling Wind Turbine Technician II 100% Travel

We run mechanical, electrical, environmental, and abuse testing from component to full system, track how the fleet holds up in the field, root-cause the failures that matter, and feed fixes straight back to design. You'll work side by side with design, test, and reliability engineers to get hardware ready for test, find out what broke and why, and get fixes back into the product fast.

Base Power Company

Engineering Technician

sourcestack_via_bold

Total Safety is the world's premier provider of integrated safety and compliance services and the products necessary to support them, including gas detection, respiratory protection, safety training, fire protection, compliance and inspection, industrial hygiene, onsite emergency medical treatment/paramedics, communications systems, engineered systems design, and materials management. The Rescue Technician provides technical rescue standby for customer projects including confined space rescue and technical rope rescue, as well as first aid and CPR.

Total Safety Careers

Rescue Technician

Assist in the drafting of SUE and other Austin group projects, working as part of a design team under the direct supervision of a Lead CADD Technician and Project Manager. This is a great position for beginners who want to learn engineering design and drafting, and the position offers an excellent career development opportunity for someone looking to grow with Halff, with potential for not only business and personal growth, but ownership in the firm.

Halff

CADD Technician I, SUE

Sentral lets you live life on your own terms in the heart of the world's best cities: Atlanta, Austin, Charlotte, Chicago, Denver, Houston, Los Angeles, Miami, Nashville, Oakland, Philadelphia, Phoenix, Pittsburgh, Portland, San Francisco, San Jose, Santa Monica, Scottsdale, and Seattle, with more coming soon. Perform routine building maintenance duties, including painting, minor electrical repairs, plumbing, carpentry, and heating and ventilation systems maintenance.

Sentral

Maintenance Technician I

ea_via_bold

In this role, you will use your eye of excellence to perform the essential functions of the role; such as, make readies, residential service requests, general maintenance work orders, and asset preservation, all while ensuring you follow proper safety protocol. Valid driver's license is required as driving is an essential job function, and no comparable alternative transportation options (e.g., ride-hailing, carpooling, bicycling, walking) can reasonably fulfill the role within travel time or cost.

H.G. Fenton Company

Maintenance Technician

Performs duties as assigned by Pharmacy Manager, Staff Pharmacist and Store Manager including utilizing pharmacy systems to enter patient and drug information, ensuring information is entered correctly, filling prescriptions by retrieving, counting and pouring pharmaceutical drugs, verifying medicine is correct, and checking for possible interactions. May assist pharmacist in administering clinical services including the collection and proper labeling of blood/urine samples from patients and other clinical services as required; assists pharmacy staff in coordination of clinical services, Walgreens healthcare clinics and external providers.

Founded over a century ago in 1901, we have a rich and colorful history of continuous improvement and innovation at Walgreens. From inventing the world’s first chocolate malted milkshake to the creation of one of the most popular and sophisticated mobile applications in retail shopping today, we have transformed ourselves into a leader within the retail and drug industry.
Walgreens, one of the nation’s largest drugstore chains, is included in the Retail Pharmacy USA Division of Walgreens Boots Alliance, Inc., the first global pharmacy-led, health well being enterprise.
At Walgreens you'll find a team positively energized by the unique talents, ideas, experiences and aspirations of every individual. In other words, you can be your authentic self in our stores, offices and other workplaces, and be comfortable and confident that what matters most here is doing your best to make health and well-being within reach for everyone on a daily basis.
Walgreens has a proud legacy of valuing diversity and fostering inclusion more than 100 years-strong, and we're still living that commitment. We intend to be recognized as a “Next Practices” company for diversity and inclusion – one whose cultures, people, perspectives and workplaces reflect the current and future customers we serve while delivering superior business performance.
Walgreens has over 9,500 stores in all 50 states, the District of Columbia, Puerto Rico, and the U.S. Virgin Islands.

Walgreen Co

Pharmacy Technician / Pharm Tech Apprenticeship

Responsibilities/Duties Travel to customer sites to perform existing conditions assessments of building controls infrastructure, including panels, controllers, field devices, networks, communication trunks, sensors, actuators, and related equipment. This junior-level role performs existing conditions site visits related to building controls infrastructure, documents field conditions, and assists with installation, startup, programming, and verification of Tridium-based building automation systems.

Service Technician Jobs in Round Rock, TX

Component & Sub-Assembly Technician Firefly Aerospace Inc

Residential Electric Technician IES Holdings Inc

Regional Traveling Technician II - 100% Travel - South US Vestas Wind Systems AS

Production Technician, Gateways Starlink Space Exploration Technologies Corp

Spacecraft Test Technician IV Firefly Aerospace Inc

Environmental Test Technician III, (2nd Shift) Firefly Aerospace Inc

GSE Technician II Firefly Aerospace Inc

Vehicle Integration Technician II Firefly Aerospace Inc

Spacecraft Test Technician II Firefly Aerospace Inc

Production Test Technician Starlink Space Exploration Technologies Corp

Vehicle Integration Technician III Firefly Aerospace Inc

Components Manufacturing Prep Technician Firefly Aerospace Inc

Traveling Wind Turbine Technician II 100% Travel Vestas Wind Systems AS

Engineering Technician Base Power Company

Rescue Technician Total Safety Careers

CADD Technician I, SUE Halff

Maintenance Technician I Sentral

Maintenance Technician H.G. Fenton Company

Pharmacy Technician / Pharm Tech Apprenticeship Walgreen Co

Building Controls Technician - Travel Team The Building People

Similar Job Searches

See More Jobs

Stand out to leading employers.