April 9, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.
April 9, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.
April 30, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.
The Air Force Program Execution Office for Intelligence, Surveillance, Reconnaissance and Special Operations (PEO ISR SOF) has the collective Air Force Materiel Command (AFMC) mission responsibility to manage and execute the modernization, development, testing, production, fielding, and sustainment of the ISR SOF portfolio, which includes over 200 programs for the United States Air Force (USAF) and foreign allies. Lead development and review of system security documentation including System Security Management Plans, Program Protection Plans, Security Risk Analyses, OPSEC Plans, and security CONOPS in accordance with DoDI 5000.02,
Duties include, but are not limited to, the operation, installation, repair, maintenance, and improvement of all building structures and equipment including HVAC, plumbing, electrical, and life safety.
RESPONSIBILITIES:
- Perform and/or oversee the day-to-day efficient operation, maintenance and repair of all building and site systems for assigned properties.
POSITION: HVAC Building Maintenance Engineer
LOCATION: Newington/Pease/Hampton, NH
REPORTS TO: Regional Vice President and Lead Engineer
ABOUT US.
The C2ISR Division provides worldwide life cycle support across the spectrum of the C2ISR capabilities based enterprise; including supply, distribution, materiel management, acquisition, system engineering and maintenance, financial planning and budgeting, security, flight test, and contracting functions. EPASS support is required to execute the major GNS programs in support of the C2ISR Division, to include: AF DCGS Network Infrastructure Transformation (NIT), Extended Tether Program (ETP), and Global Command and Control System – Air Force Infrastructure (GCCS-AF (I)).
ESSENTIAL DUTIES AND RESPONSIBILITIES: • In support of the pioneer status for the Wakefield Thermal Brand, develop targeted products for various market segments and introduce these new products into distribution sales channel, including the identification of new products, and expansion of existing products. SUMMARY: Reporting to the Director of Engineering, the Thermal Design Engineer will be a technical resource for both internal and external stakeholders as it relates to the design of our various, highly technical product offerings in the thermal design space.
Londonderry, NH20 days ago
CONSIDERED EXPERIENCE INCLUDES: Field Service Mechanic Tech Maintenance Technician Engineer Install Repair Calibrate Maintain CNC Machine Tools Routers Grinders Saws Cutters Lathes Mills Millers Machining Centers Robot Loaders #DiedreMoire #JobSearch #JobHunt #JobOpening #Hiring #Job #Jobs #Careers #Employment #jobposting #cncjobs #ManufacturingJobs #MaintenanceMechanic #FieldServiceJobs #TechnicianJobs. Field Service Mechanic Tech Technician Engineer Install Repair Calibrate Maintain Maintenance CNC Machine Tool Routers Grinders Saws Cutters Lathe Mill Miller Machining Robot FANUC _ .
Key Tasks: - Deliver engineering solutions and capabilities that deepen our ability to monitor database activity to support our Cybersecurity initiatives of building in house solutions. Employee pay is based on factors like relevant education, qualifications, certifications, experience, skills, seniority, location, performance, union contract and business needs.
As an Electrical Components Engineer will join a small, friendly team and serve as a primary technical resource for designing magnetic components that meet demanding performance and quality requirements. Build your future with a custom electronic and magnetic component manufacturer in Windham, NH, where your work directly shapes real products and fast-moving engineering priorities.
Security Compliance: Oversee endpoint security configurations, including disk encryption (BitLocker), endpoint protection clients, and corporate mobile device management (MDM) policies. ensures that hospital staff—including clinicians, administrators, and support personnel—receive seamless, timely, and ITIL-aligned technical support to maintain uninterrupted patient care and operational workflows.
A growing precision manufacturing environment is seeking a skilled Senior Process Engineer with strong CNC programming expertise to support new product introduction, optimize production processes, and drive continuous improvement across machining operations. Create, implement, and troubleshoot CNC programs for new part start ups using MasterCAM, PartMaker, or similar platforms.
CONSIDERED EXPERIENCE INCLUDES: Field Service Mechanic Tech Maintenance Technician Engineer Install Repair Calibrate Maintain CNC Machine Tools Routers Grinders Saws Cutters Lathes Mills Millers Machining Centers Robot Loaders #DiedreMoire #JobSearch #JobHunt #JobOpening #Hiring #Job #Jobs #Careers #Employment #jobposting #cncjobs #ManufacturingJobs #MaintenanceMechanic #FieldServiceJobs #TechnicianJobs. Field Service Mechanic Tech Maintenance Technician Engineer Install Repair Calibrate Maintain CNC Machine Tool Routers Grinders Saws Cutters Lathes Mills Millers Machining Centers Robot Loaders _.
Described compensation is not definite nor precise and may be estimated and approximate and is negotiable depending on market conditions and candidate availability and other factors and is solely at the discretion of employers. To cancel receiving email communications, simply send an email from your address with the word remove"" in the subject line to pleaseremove@candseek4.com
We are HCLTech, one of the fastest-growing large tech companies in the world and home to 218,000 people across 60 countries, supercharging progress through industry-leading capabilities centered around Digital, Engineering and Cloud. Throughout your time with us, we offer transparent communication with senior-level employees, learning and career development programs at every level, and opportunities to experiment in different roles or even pivot industries.
Concord, New HampshireToday
Required Skills: 3+ years servicing industrial equipment, electromechanical engineering proficiency, industrial laser systems knowledge, and axis motion systems. Forge the Future of Manufacturing: As a Field Service Engineer, you are the face of innovation, ensuring that the world's most advanced 3D printing technology operates at peak performance.
Collaborate with customers and internal teams by maintaining strong communication, managing service assignments with defined objectives, ensuring alignment between customer expectations and service delivery, and leading the resolution of complex technical and project-related issues. Field Service Engineer Responsibilities: Perform manual and automated calibration, adjustments, preventative maintenance, and troubleshooting of test and measurement electronic equipment at service centers and customer sites, including RF/Microwave instruments up to 50 GHz.
North Andover, MA28 days ago
In this role, you will have the opportunity to: Complete troubleshooting, installation, validation, preventative maintenance, modifications, and service repair needs on Beckman Coulter equipment including providing excellent and efficient service to Beckman Coulter's customers, along with technical training on products. The successful candidate will possess the following: Ability to manage a dynamic service schedule, travel throughout an assigned region, and independently complete service documentation, PMs, and corrective actions while meeting company performance and compliance requirements.
Concord, New Hampshire15 days ago
Complete troubleshooting, installation, validation, preventative maintenance, modifications, and service repair needs on Beckman Coulter equipment including providing excellent and efficient service to Beckman Coulter’s customers, along with technical training on products. The amount and availability of any bonus, commission, benefits, or any other form of compensation and benefits that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company’s sole discretion, consistent with the law.
has three operating divisions: (a) Security, providing security and inspection systems, turnkey security screening solutions and related services; (b) Healthcare, providing patient monitoring, diagnostic cardiology and anesthesia systems; and (c) Optoelectronics and Manufacturing, providing specialized electronic components and electronic manufacturing services for original equipment manufacturers with applications in the defense, aerospace, medical and industrial markets, among others. If any person or entity, including a recruiter or agency, submits any information, including any resume or information regarding any potential candidate, without a signed agreement in place with OSI, OSI explicitly reserves the right to use such information, and pursue and/or hire such candidates, without any financial obligation to the person, recruiter or agency.
Perform manual and automated calibration, adjustments, preventative maintenance, troubleshooting of Test & Measurement electronic equipment at our client service center or at our customer's sites. University Degree, Technical School or Military PMEL/TMDE -OR- equivalent industry experience of all types of client and Non-client Test Equipment to include RF/ Microwave skills to 50 GHz
These include: + Travel to customer site to support our customers to perform preventive maintenance procedures, system level repairs, system installation, and acceptance testing of Teradyne Defense and Aerospace Test Systems (S9100, SpectrumHS, SpectrumBT Tester, High Speed SubSystem, Tempo). ATTENTION APPLICANTS WITH DISABILITIES: If you’re unable to access our on-line application due to a disability you may visit one of our locations or our Corporate Office at 600 Riverpark Drive, North Reading, MA and request a paper application form.
These include: + Travel to customer site to support our customers to perform preventive maintenance procedures, system level repairs, system installation, and acceptance testing of Teradyne Defense and Aerospace Test Systems (S9100, SpectrumHS, SpectrumBT Tester, High Speed SubSystem, Tempo). ATTENTION APPLICANTS WITH DISABILITIES: If you’re unable to access our on-line application due to a disability you may visit one of our locations or our Corporate Office at 600 Riverpark Drive, North Reading, MA and request a paper application form.
Field Service Engineers serve as the frontline technical experts, providing troubleshooting, maintenance, and operational support while collaborating closely with customers, operations teams, and engineering partners to drive continuous improvement and deliver an exceptional customer experience. Must be capable of occasional and/or continuous feeling, seeing, hearing, bending, twisting, stooping, pushing, pulling, balancing, gripping, climbing, crawling, sitting, handling objects, and repetitive movement using both hands and feet.
Duties:Perform manual and automated calibration, adjustments, preventative maintenance, troubleshooting of Test & Measurement electronic equipment at our client service center or at our customer's sites. Assist in maintaining the Calibration team’s accreditation through participation in proficiency testing, quality measure assurance programs, and applicable training.
Proficiency in machine automation, mechanics and electronics • Provide technical hardware instruction and assistance to customer representatives regarding installation, operation, and maintenance • Strong verbal/written communication and documentation skills • Interpersonal skills with the ability to build effective working relationships with internal cross-functional teams and external customer teams in a variety of domestic and international offices across all levels of the organizations. Field Service Engineers are an integral part of Command Alkon's goal to deliver fully integrated technological solutions to the heavy building materials industry.
Job Description: Perform manual and automated calibration, adjustments, preventative maintenance, troubleshooting of Test & Measurement electronic equipment at our client service center or at our customer's sites. Requirements: University Degree, Technical School or Military PMEL/TMDE -OR- equivalent industry experience of all types of client and Non-client Test Equipment to include RF/ Microwave skills to 50 GHz.
Together we'll progress towards this better future by using future-facing technologies to harmonize the world's desire for decarbonization and clean energy with the need for more reliable, effective and efficient power delivery. Our global Employee Assistance Program provides a variety of resources, including mental health resources, where employees can connect 24/7 with certified clinicians via, phone, email, chat and video.
li>Calibration & System Upgrades Calibrate critical components (AMUs, RF Generators, APCs, MFCs) and implement performance-enhancing upgrades (turbo pumps, PLCs, breakers) to ensure optimal system reliability and throughput. Advanced Troubleshooting Resolve complex hardware, and software issues using specialized tools (vacuum leak detectors, RF power meters, DVMs, LCR meters, multimeters).
Calibration & System Upgrades Calibrate critical components (AMUs, RF Generators, APCs, MFCs) and implement performance-enhancing upgrades (turbo pumps, PLCs, breakers) to ensure optimal system reliability and throughput. o Familiarity with semiconductor processes: RIE, PECVD, ICP, ALD.• Physical & Travel Requirementso Hold a valid driver's license and safe driving record, passport, and ability to travel independently.
Manchester, NH30+ days ago
for description visit the url https://jobs.baesystems.com/global/en/job/BAE1US123011BREXTERNAL/F-35-Field-Service-Engineer-(Onsite).
p>Summary: We are seeking a dedicated Field Service Engineer to lead end-to-end failure investigations of robotic systems and provide technical support for vacuum robots.
If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.
These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. But for you to contribute we think you should at least have: Strong electro-mechanical troubleshooting skills, proficient with using electronic test equipment required, e.g., oscilloscopes, digital voltmeters, and signal generators.
Billerica, MA30+ days ago
With more than 4,500 ASMers representing 70 nationalities, our people and our advanced semiconductor devices are playing a crucial role in trends such as 5G, cloud computing, AI, and autonomous driving. This role is your chance to gain hands-on experience with our advanced semiconductor equipment and contribute to our customers' success by ensuring our technology performs flawlessly.
Should have excellent customer handling skills, governance, lead operations with confidence, manage escalations at regional level, Should be capable to be proactive to pick operations issue with customer and fix them, decision making capability, mentor team where possible, bring continues improvement. Manage day-to-day operation based on onsite support services, ticket management, KPI, escalation, IMAC, Break fixes, dispatch support.
p>Mission Critical Competencies: - Customer Focus - Is dedicated to meeting the expectations and requirements of internal and external customers; gets first-hand customer information and uses it for improvements in products and services; acts with customers in mind; establishes and maintains effective relationships with customers and gains their trust and respect.
- Composure - Is cool under pressure; does not become defensive or irritated when times are tough; is considered mature; can be counted on to hold things together during tough times; can handle stress; is not knocked off balance by the unexpected; doesn't show frustration when resisted or blocked; is a settling influence in a crisis.
Job Summary: Reporting to the Senior Manager, US Service in our Hudson, NH facility, the Service Engineer plays a critical role in preserving Teledyne FLIR's position as the Global Leader for test and measurement and thermal imaging product solutions through the testing and calibration of factory supplied and customer owned test & measurement, and handheld thermal imaging products. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research.
li>Serve as the on‑site technical expert, maintaining strong, proactive communication with the customer to ensure optimal performance and availability of both customer‑owned and Keysight test equipment assets. Responsibilities Include:
- Perform automated calibrations on a range of Keysight RF test and measurement instruments, including network analyzers, signal analyzers, and RF signal generators.
The base salary for the role will depend on several job-related factors, including, but not limited to, education, training, experience, the geographic location of the successful candidate, skills, competencies, job-related knowledge, and travel requirements for this position. Certain positions at Bruker require compliance with export control laws and as a result, all interviewed candidates for all positions will be screened pre-interview to determine their eligibility in light of export control restrictions.
Support Windows desktops/laptops and perform break/fix repairs. Troubleshoot and resolve hardware, software, and access-related issues.
Curiox's portfolio includes instruments, automation systems, and consumables for cell and protein analysis, that are widely used in life science research, immunology, immunotherapy, drug discovery, diagnostics, vaccine research, and cell therapy research and manufacturing. Traditional sample preparation methods often involve labor-intensive manual operations, particularly the centrifugation step, leading to variability and requiring highly skilled personnel.
The ideal candidate will possess an active Secret Clearance and have at least 6+ years of relevant professional experience in network planning, implementation, and support, with in-depth knowledge of network protocols, infrastructure, and security principles. The Contractor shall advise and support activities related to the planning, analysis, design, development, testing, quality assurance, configuration, installation, implementation, integration, maintenance, and management of networked systems.
Similar Job Searches
Design Engineer Jobs in Merrimack, NHSystems Engineer Jobs in Merrimack, NHPlanning Engineer Jobs in Merrimack, NHApplication Engineer Jobs in Merrimack, NHSystems Test Engineer Jobs in Merrimack, NHProduct Engineer Jobs in Merrimack, NHService Engineer Jobs in Hudson, NHService Engineer Jobs in Chelmsford, MAService Engineer Jobs in Nashua, NHService Engineer Jobs in Manchester, NH