NewSystems Engineer, Senior - TS DCS CorporationSystems Engineer, Senior - TSBedford, MA$90,220–$175,000 / yearThe MIT is responsible for translating operational requirements into technical solutions, developing integrated architectures, assessing and mitigating risks, supporting acquisition execution strategies, and coordinating test and evaluation activities to ensure capabilities are delivered to operational users. C3BM’s main efforts are Architecture and Systems Engineering (ASE), Operational Response Team (ORT), and multiple mission integration teams such as Air, Maritime, and multiple acquisitions consisting of both the Advanced Battle Management System (ABMS) and Space.
NewSystems Engineer, Journeyman - TS DCS CorporationSystems Engineer, Journeyman - TSBedford, MA$96,757–$145,000 / yearThe MIT is responsible for translating operational requirements into technical solutions, developing integrated architectures, assessing and mitigating risks, supporting acquisition execution strategies, and coordinating test and evaluation activities to ensure capabilities are delivered to operational users. C3BM’s main efforts are Architecture and Systems Engineering (ASE), Operational Response Team (ORT), and multiple mission integration teams such as Air, Maritime, and multiple acquisitions consisting of both the Advanced Battle Management System (ABMS) and Space.
Model-Based Systems Engineer (MBSE) GCR Professional ServicesModel-Based Systems Engineer (MBSE)Woburn, Massachusetts$75–$90 / hourContractorRole can be Hybrid, TBD The Systems Engineer should have experience architecting systems, working across the Systems Engineering Lifecycle, and in Digital Engineering/Model-Based Systems Engineering (MBSE) achieving architectural integrity and traceability through requirements analysis, system and software development and production system deployment. The ideal candidate will be well-versed in Systems Engineering techniques, Modeling and Simulation, and Digital Engineering/MBSE and be excited about opportunities to mentor more junior staff and help foster growth of subject matter expertise across the organization.
NewSystems Engineer, Junior - TS DCS CorporationSystems Engineer, Junior - TSBedford, MA$73,160–$115,000 / yearThe C2ISR Division provides worldwide life cycle support across the spectrum of the C2ISR capabilities based enterprise; including supply, distribution, materiel management, acquisition, system engineering and maintenance, financial planning and budgeting, security, flight test, and contracting functions. Experienced in requirements development, production and deployment, and operation and support, architectures development & implementation, modeling & simulation including but not limited to Model Based Systems Engineering principles, verification & validation, technical data package development and sustainment, and principles of configuration management.
Systems Engineer, Journeyman - Secret DCS CorporationSystems Engineer, Journeyman - SecretBedford, MA$96,757–$145,000 / yearThe Electronic Systems System (ESS) Division aka Force Protection Division's mission responsibility is to manage and execute the modernization, design, development, testing, fielding, and sustainment of the various software and hardware within the ESS Portfolio. Conduct systems engineering and program reviews to evaluate alternative plans, technical baselines, design efforts, and system-level test results to ensure subsystem and system performance meets approved program specifications.
Principal Radar Systems Engineer GCR Professional ServicesPrincipal Radar Systems EngineerWoburn, MassachusettsContractorClient is focused on delivering National Defense capabilities by driving mission-focused strategies to develop advanced technology systems enabling enduring products and solutions focused on achieving the customer vision. Applicants are expected to be self-motivated, detail oriented and have a demonstrated ability to effectively communicate with all levels of management and individual contributors on the program team through strong written and verbal communication skills.
Systems Integration/Test Engineer Butler America AerospaceSystems Integration/Test EngineerMaynard, MA$60–$70 / hourFull timePlans, implements, tests, documents, and maintains solutions for the integration and testing of in-house developed and COTS/GOTS components, elements, subsystems and/or systems. Reviews, evaluates and derives requirements for testability, develops and directs preparation and execution of comprehensive test plans, procedures and schedules for complete systems and/or subsystems.
System Engineer, Senior - Secret DCS CorporationSystem Engineer, Senior - SecretBedford, MA$90,220–$170,000 / yearThe Air Force Program Execution Office for PEO Electronic Systems (AFPEO/ES) has the collective AFMC mission responsibility to manage and execute the modernization, development, testing, production, fielding, and sustainment of the PEO Electronic Systems portfolio, which includes over 130 programs for the U.S. Air Force (USAF) and foreign allies. In this Advisory and Assistance Services (A&AS) role, you will provide expert-level support to Department of Defense (DoD) programs by assisting government leadership with decision-making, planning, and execution throughout the acquisition lifecycle.
NewSystem Engineer SymboticSystem EngineerRaymond, NH$71,000–$97,900Applying next-gen technology, high-density storage and machine learning to solve today's complex distribution challenges, Symbotic enables companies to move goods with unmatched speed, agility, accuracy and efficiency. The Customer Operations organization drives operational excellence by engaging and partnering with our onsite customers to drive best-in-class quality, safety and system performance.
Senior Software Engineer GCR Professional ServicesSenior Software EngineerWoburn, MassachusettsContractorHave domain expertise in one or more of the following areas: electronic warfare, antenna apertures, sensor resource management, large-scale platform test systems, cyber physical systems, open system architectures. Systems Development Division (SDD) executes the entire lifecycle of the solution, from conceptualization and architecture refinement through implementation and deployment, while leveraging novel technologies to deliver first-of-a-kind systems.
Robotics/Controls Engineer GCR Professional ServicesRobotics/Controls EngineerBurlington, Massachusetts$100,000–$140,000 / yearCollaborate with the Manager of Controls Engineering to design and implement advanced control systems for robotic manipulators and electromechanical systems. Responsibilities include motion control and servo tuning, dynamic modeling, simulation in MATLAB, and real-time software implementation.
Senior Mechanical Engineer SymboticSenior Mechanical EngineerMelrose, MAApplying next-gen technology, high-density storage and machine learning to solve today's complex distribution challenges, Symbotic enables companies to move goods with unmatched speed, agility, accuracy and efficiency. Cross-Functional Collaboration: Work closely with electrical, software, controls, manufacturing, and quality engineering teams to ensure seamless integration and product success. .
NewSenior Quality Engineer JobotSenior Quality EngineerDanvers, MA$110,000–$140,000 / yearInformation collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. 3. Proven experience in driving corrective actions, conducting root cause analysis, managing nonconformances, and overseeing the quality of electro-mechanical products.
NewProcess Engineer JobotProcess EngineerPeabody, MA$100,000–$120,000 / yearInformation collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
MS Azure Engineer Continental ResourcesMS Azure EngineerBedford, MAFull timeA successful candidate has strong experience with Azure Cloud services, is self-driven, enjoys learning new technologies, and is willing to stretch themselves to become a stronger engineer and mentor others around them to do the same. Developing effective cloud infrastructure, enforcing good architectural principles, providing technical oversight, and ensuring security best practices are implemented and followed.
Senior Supplier Quality Engineer GCR Professional ServicesSenior Supplier Quality EngineerBillerica, Massachusetts$120,000–$140,000 / yearThis role serves as the primary quality liaison between the company and its suppliers, partnering with Procurement, Engineering, Operations, and Manufacturing teams to drive supplier qualification, audits, compliance, continuous improvement, and defect prevention. Manage supplier quality metrics, including defect rates, non-conformance reports (NCRs), corrective actions, and supplier performance indicators.
NewRF Engineer PlanIT GroupRF Engineerchelmsford, MAThe engineer will learn from and collaborate with other engineering disciplines, including hardware engineers, systems engineers, and circuit design engineers as well as technicians and manufacturing support personnel. The engineer will be responsible for analysis and troubleshooting of circuits for advanced electronic modules, including amplifiers, mixers, switches, frequency generation circuits and frequency conversion circuits.
Test Engineer Continental ResourcesTest EngineerExeter, NHFull timeThe Test Engineer is responsible for the design, development, programming, implementation, and maintenance of automated test equipment and test fixtures used in the testing of power supplies and related electronic products. This role works closely with design and manufacturing teams to develop test procedures, create automated test programs, and ensure product quality through effective testing processes.
Manufacturing Engineer III (NH) GCR Professional ServicesManufacturing Engineer III (NH)Hudson, New HampshireContractorYou will collaborate with cross-functional teams, including design engineers, production personnel, and quality assurance, to optimize manufacturing operations and drive continuous improvement initiatives. As a Manufacturing Engineer, your primary responsibility will be to develop and improve manufacturing processes and systems to ensure the efficient and cost-effective production of defense and aerospace products.
Quality Engineer III (NH) GCR Professional ServicesQuality Engineer III (NH)Hudson, New Hampshire$45–$58 / hourContractorThis role will participate and/or lead failure analysis in manufacturing and for field failures, develop troubleshooting & repair schemes, develop manufacturing process controls and documentation, interface with manufacturing and quality personnel to train and transfer processes & knowledge for successful volume production launches, and engage with suppliers as needed to drive improvement and implement process controls. This is a hands-on role that works with a team of quality engineers, technicians and inspectors that are engaged through the entire life cycle of product, starting during development, continuing with transitioning of product to manufacturing, and then supporting the continuous manufacture of product.
NewPCB CAD Engineer II (Hybrid - Andover, MA) GCR Professional ServicesPCB CAD Engineer II (Hybrid - Andover, MA)Andover, MassachusettsContractorJob Description: Join a focused team of engineers bringing highly complex, dense, rugged and secure electronic packaging solutions to our nation’s warfighters and first responders. • Ability to work in a fast paced engineering services group supporting multiple time zones within the US and internationally.
NewManufacturing Test Engineer (NH) GCR Professional ServicesManufacturing Test Engineer (NH)Hudson, New HampshireContractorExperience doing root-cause analysis and complex debug activities on motherboard platforms (Intel server motherboard platforms is preferred) . Client is seeking a Manufacturing Test Engineer or Test Technician to perform debug and validation efforts for Intel-based server motherboards.
NewManufacturing Engineer III| (NH) GCR Professional ServicesManufacturing Engineer III| (NH)Hudson, New HampshireContractorYou will collaborate with cross-functional teams, including design engineers, production personnel, and quality assurance, to optimize manufacturing operations and drive continuous improvement initiatives. As a Manufacturing Engineer, your primary responsibility will be to develop and improve manufacturing processes and systems to ensure the efficient and cost-effective production of defense and aerospace products.
Lead Firmware Engineer GCR Professional ServicesLead Firmware EngineerWoburn, MassachusettsContractorOur clients System Development Division (SDD) is focused on delivering National Defense capabilities by driving mission-focused strategies to develop advanced technology systems enabling enduring products and solutions focused on achieving the customer vision. Applicants are expected to be self-motivated, detail oriented and have a demonstrated ability to effectively communicate with all levels of management and individual contributors on the program team through strong written and verbal communication skills.?.
NewCyclotron Engineering Technician/ Cyclotron Engineer SOFIECyclotron Engineering Technician/ Cyclotron EngineerHaverhill, MA$90,000–$100,000 / yearThe primary responsibility of this role is first-line troubleshooting, maintenance, and repair of electro/mechanical equipment associated with manufacturing, including manipulator arms, lead shielded hot cells, radiosynthesizers and cyclotrons and associated subsystems. The Cyclotron-Engineering Technician is accountable for the safe and routine operation, maintenance, and repair of equipment in SOFIE’s PET radio pharmacy, which manufactures PET diagnostics under 21 CFR 212 guidelines.
RF Engineer Butler America AerospaceRF EngineerMaynard, MA$82–$97 / hourContractorExpertise with RF subsystems and hardware including antennas, transmitters, receivers, microwave components, low noise amplifiers, high power amplifiers, advanced electronic modules, amplifiers, mixers, switches, frequency generation circuits, and frequency conversion circuits is desired. -The engineering will collaborate with other engineering disciplines including hardware engineers, systems engineers, and circuit design engineers as well as technical and manufacturing support personnel.
Test Engineer, Senior - Secret DCS CorporationTest Engineer, Senior - SecretBedford, MA$90,220–$165,000 / yearThe Electronic Systems System (ESS) Division aka Force Protection Division's mission responsibility is to manage and execute the modernization, design, development, testing, fielding, and sustainment of the various software and hardware within the ESS Portfolio. Demonstrate ability to learn and understand technical systems; capture detailed test metrics, log defects, perform root-cause analysis; end to end integration and regression test cycles.
CAD / PCB Engineer II GCR Professional ServicesCAD / PCB Engineer IIAndover, MassachusettsContractorJoin a focused team of engineers bringing highly complex, dense, rugged and secure electronic packaging solutions to our nation’s warfighters and first responders. • Ability to work in a fast-paced engineering services group supporting multiple time zones within the US and internationally.
Application Engineer GCR Professional ServicesApplication EngineerBillerica, Massachusetts$95,000–$130,000 / yearJob Summary: This role is responsible for translating customer technical requirements into product specifications, designing and validating new features, and developing custom mechanical components. It also includes maintaining technical documentation, providing on-site support, and collaborating cross-functionally to ensure successful product implementation.
NewCybersecurity Engineer DCS CorporationCybersecurity EngineerBedford, MA$90,220–$175,000 / yearUnder the Department of the Air Force Program Executive Office for Command, Control, Communication, and Battle Management (DAF PEO C3BM), Kessel Run technologies make up the DAF BATTLE NETWORK, the systems-of-systems designed to help the Joint Force make operational decisions faster than our adversaries. The Assured Compliance Assessment Solution (ACAS) Cybersecurity Engineer will be a member of the Air Operation Center (AOC) cybersecurity team and will be responsible for assisting with the implementation, maintenance, and operation of the Assured Compliance Assessment Solution (ACAS) suite of tools.
General/Interdisciplinary Engineer, Senior - Secret DCS CorporationGeneral/Interdisciplinary Engineer, Senior - SecretBedford, MA$90,220–$170,000 / yearConduct systems architectural analyses to include system design/design feasibility and state-of-the-art assessment to Produce architectures, document planned and existing systems, determine deficiencies, develop alternatives, recommend solutions, and support development of a plan to implement the chosen solution per acquisition and sustainment system engineering processes. Analysis of Alternatives (AoA), Systems Engineering Plan (SEP)…), systems review and analysis with written reporting, briefing, and artifact development as required for all of the technical specialty areas defined in this section; and the planning and execution of all necessary technical reviews, assessments, and interchange meetings (e.g.
NewGeneral Interdisciplinary Engineer, Journeyman - Secret DCS CorporationGeneral Interdisciplinary Engineer, Journeyman - SecretBedford, MA$96,757–$155,000 / yearConduct systems architectural analyses to include system design/design feasibility and state-of-the-art assessment to Produce architectures, document planned and existing systems, determine deficiencies, develop alternatives, recommend solutions, and support development of a plan to implement the chosen solution per acquisition and sustainment system engineering processes. Analysis of Alternatives (AoA), Systems Engineering Plan (SEP)…), systems review and analysis with written reporting, briefing, and artifact development as required for all of the technical specialty areas defined in this section; and the planning and execution of all necessary technical reviews, assessments, and interchange meetings (e.g.
DevOps and MuleSoft Engineer Kforce Inc.DevOps and MuleSoft EngineerWilmington, MA$68–$75Employee pay is based on factors like relevant education, qualifications, certifications, experience, skills, seniority, location, performance, union contract and business needs. By clicking “Apply Today” you agree to receive calls, AI-generated calls, text messages or emails from Kforce and its affiliates, and service providers.
Senior Engineer – Test Method Validation CYNET SYSTEMSSenior Engineer – Test Method ValidationNorth Andover, MA$95–$100 / monthTemporaryContractorPart timeAs a nationally and locally certified Minority Business Enterprise (MBE), Cynet Systems is committed to helping organizations build high-performing teams while empowering professionals to grow rewarding careers. We deliver agile, scalable talent solutions across IT, engineering, life sciences, clinical, and professional staffing, powered by a high-performing recruitment engine operating across North America and Asia.
Controls Engineer - Industrial - Ayer, MA Michael Page USAControls Engineer - Industrial - Ayer, MAAyer, MA$100,000–$120,000 / yearFull timeWorking closely with production, maintenance, and engineering teams, you will lead projects, troubleshoot critical systems, and contribute to continuous improvement initiatives that directly impact plant performance. Significant investment in technology, automation, and continuous improvement creates an environment where engineers are encouraged to expand their technical expertise while working on challenging and rewarding projects.
Project Engineer Butler America AerospaceProject EngineerAndover, MA$57–$67 / hourContractorMaintain and update the Integrated Master Schedule (IMS) for Advanced Test Equipment (ATE) programs; ensuring alignment with milestones and resource plans. * Identifying and driving continuous process improvement initiatives that boost project execution, efficiency, and improve documentation quality.
Controls Engineer - Life Sciences - Jaffrey, NH Michael Page USAControls Engineer - Life Sciences - Jaffrey, NHJaffrey, NH$110,000–$125,000 / yearFull timeThis individual will work closely with cross-functional engineering and manufacturing teams to deliver reliable, installation-ready machinery for highly regulated manufacturing environments. This Controls Engineer position supports the design, programming, commissioning, and troubleshooting of custom automation systems, robotic cells, and production equipment.
Controls Engineer Michael Page USAControls EngineerConcord, NH$115,000–$145,000 / yearFull timeBachelor's degree in Electrical Engineering, Controls Engineering, Automation Engineering, or a related technical discipline; equivalent industrial controls experience will also be considered. Strong understanding of industrial networking concepts, including Ethernet communications, IP addressing, subnetting, and managed network switches.
NewInnovation Support Engineer UniFirstInnovation Support EngineerWilmington, MA$95,000–$114,000Work with Engineering and Production Management Teams to gather feedback on automation software applications and if change is desired, define complete and accurate requirements, utilize analytical and communication skills to obtain buy-in, interface with our Engineering Development Team for testing and schedule timely deployments. Develop and conduct training and instruction for Engineering and Operations Team Partners on equipment utilization, operating systems and various custom-built software applications.
Manufacturing Automation Engineer - Middleton, MA Michael Page USAManufacturing Automation Engineer - Middleton, MAMiddleton, MA$110,000–$130,000 / yearFull timeWith a strong reputation for technical excellence, product innovation, and customer-focused problem solving, the organization develops advanced materials and technologies that help improve manufacturing efficiency, product quality, and operational performance. An industry-leading manufacturer is seeking a Manufacturing Automation Engineer to support automation, controls, and electrical systems across a dynamic production environment.
Aerospace - Mechanical Engineer - Chelmsford, MA Michael Page USAAerospace - Mechanical Engineer - Chelmsford, MAChelmsford, MA$110,000–$120,000 / yearFull timeOur client is a well-established manufacturer of specialized electronic protection and filtering solutions serving a diverse customer base across commercial, industrial, and defense markets. Our client is seeking a Mechanical Design Engineer to support the design, development, testing, and documentation of specialized electronic hardware products.
Controls Engineer - Materials - Groton, MA Michael Page USAControls Engineer - Materials - Groton, MAGroton, MA$110,000–$125,000 / yearFull timeThe role serves as a key technical resource for plant operations, maintenance, and equipment modernization efforts while driving automation upgrades across the site. This Automation & Controls Engineer position supports a 24/7 manufacturing facility through automation system reliability, controls troubleshooting, and continuous improvement initiatives.
Senior Manufacturing Engineer in Wakefield, MA Michael Page USASenior Manufacturing Engineer in Wakefield, MAWakefield, MA$130,000–$145,000 / yearFull timeAs they continue to expand into new markets and applications, they are investing in top technical talent who can help drive operational excellence, improve production scalability, and support long-term business growth. Our client is a rapidly growing advanced manufacturing company that specializes in delivering precision-engineered solutions for customers across a variety of innovative and technology-driven industries.
Senior Manufacturing Engineer in Lexington, MA Michael Page USASenior Manufacturing Engineer in Lexington, MALexington, MA$145,000–$146,000 / yearFull timeAn exciting opportunity for a Manufacturing Engineer to drive process optimization, operational excellence, and continuous improvement within a cutting-edge manufacturing environment supporting advanced engineered components. Backed by a culture of innovation and continuous improvement, the organization combines cutting-edge technology, research-driven development, and scalable manufacturing to deliver high-performance solutions.
Mechanical Engineer - Lowell, MA Michael Page USAMechanical Engineer - Lowell, MALowell, MA$90,000–$110,000 / yearFull timeThe organization values technical expertise, continuous improvement, and practical problem-solving, making it an excellent opportunity for engineers who enjoy working on complex products in a fast-paced setting. This role offers the opportunity to manage projects throughout the product lifecycle while working closely with cross-functional teams on new product development, testing, and continuous improvement initiatives.
Manufacturing Engineer - Exeter, NH Michael Page USAManufacturing Engineer - Exeter, NHExeter, NH$100,000–$140,000 / yearFull timeThis role offers hands-on involvement with tooling, capital equipment, production optimization and cross-functional engineering projects, while contributing to the delivery of critical, high-reliability products. A successful Program Manager lll should have the following qualifications: Bachelor's degree in a relevant engineering discipline preferred; equivalent experience will also be considered.
Bomber Mission Planning: Subject Matter Expert LeidosBomber Mission Planning: Subject Matter ExpertNorth Andover, MA$107,900–$195,050Represent the Government customer in Product Management (with content authority for the Program Backlog), responsible for identifying Customer needs, prioritizing Features, guiding the work through the Program level processes, and developing the program Vision and Roadmap consistent with the Solution Intent and Context. Support Agile Product Manager/Systems Engineer/Release Train Manager with a collection of products representing the client stakeholders to the development team to include product vision, design, development, testing and sustainment.
NewControls Engineer - Industrial - Concord, NH Michael Page USAControls Engineer - Industrial - Concord, NHConcord, NH$100,000–$130,000 / yearFull timeThe Controls Engineer is responsible for the design, programming, commissioning, troubleshooting, and maintenance of industrial control systems, automated manufacturing equipment, and operational technology (OT) networks. This hands-on role supports production operations by improving system reliability, resolving complex technical issues, and leading automation and continuous improvement projects throughout the facility.
Automation and Controls Engineer - Electrical - Ayer, MA Michael Page USAAutomation and Controls Engineer - Electrical - Ayer, MAAyer, MA$110,000–$125,000 / yearFull timeThis role partners closely with Operations, Maintenance, Engineering, and IT teams to improve reliability, optimize production, reduce downtime, and support capital projects involving DCS, QCS, PLC, and networked control systems. The Project/Controls Engineer is responsible for supporting and managing process control systems, automation equipment, and plant-wide controls infrastructure within a manufacturing environment.
NewManufacturing Engineer - Lancaster, MA Michael Page USAManufacturing Engineer - Lancaster, MALancaster, MA$100,000–$115,000 / yearFull timeAn established manufacturing organization is seeking a Manufacturing Engineer with expertise in extrusion and injection molding to support process optimization, quality improvements, and production growth within a regulated manufacturing environment. Employees are encouraged to contribute ideas, lead change, and work cross-functionally with colleagues across multiple locations to deliver high-quality products and processes.