Senior Electrical Design Engineer-Power Electronics Gables Search GroupSenior Electrical Design Engineer-Power ElectronicsHuntsville, AL$115,000–$130,000 / yearThe SEDE will concentrate specifically on the design and development of Hardware for Wireless Charging Systems, understand Wireless Charging Protocols, serve as an attending member in Wireless Charging organizations (such as WPC), serve on committees and councils related to the company’s core Wireless Charging Competencies. With a strong focus on innovation and engineering excellence, transforms concepts into fully realized products, ensuring seamless integration and cost-effective manufacturing solutions for the automotive industry.
Research Engineer III/IV/V/VI– Radiation Effects Testing and Research Facility Auburn UniversityResearch Engineer III/IV/V/VI– Radiation Effects Testing and Research FacilityHuntsville, AL$64,030–$115,250 / yearFull timeThe Auburn University Applied Research Institute (ARI) is seeking a Research Engineer to support the development, setup, and operation of radiation effects testing such as high-energy proton cyclotron, pulsed laser single event effects or Cobalt-60 Total Ionizing Dose (TID) on space hardware and electronics. These testing capabilities will serve as a key resource for radiation effects research and development within a larger state-of-the-art research center focused on radiation effects in advanced microelectronics.
Research General Engineer U.S. Department of Homeland SecurityResearch General EngineerHuntsville, AL$120,094–$156,124 / yearSpecified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. Related curriculum -- Successful completion of a curriculum leading to a bachelors degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelors degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Status Candidates, Merit Promotion, Current Federal Employees, Former Federal Employees, Overseas Employees, Former Overseas Employees, CTAP, ICTAP, VRA, VEOA, 30% Disabled, Schedule A, Individuals with Disabilities, Military Spouses, Land and Base Management, Peace Corps, Americorps, Vista For definitions of common terms found in this announcement: http://dhsconnect.dhs.gov/org/comp/mgmt/dhshr/hr/Documents/JOA_Common_Definitions.pdf .
Principal Research Scientist/Engineer- Huntsville (Pool) Auburn UniversityPrincipal Research Scientist/Engineer- Huntsville (Pool)Huntsville, AL$73,090–$278,210 / yearFull timeAreas of focus may include modeling and simulation; systems engineering and integration; advanced and additive manufacturing; autonomous systems: robotics; electromagnetics, mechanical and electrical systems design, thermal and structural analysis, materials science and engineering; propulsion systems; and multi-program project management supporting government and industry sponsors. Auburn University’s Office of the Senior Vice President for Research and Economic Development and the Applied Research Institute (ARI) is seeking candidates for multiple Principal Research Scientist/Engineer positions in anticipation of securing contract funding across a broad range of engineering and scientific disciplines.
Research Engineer, Huntsville Auburn UniversityResearch Engineer, HuntsvilleHuntsville, AL$50,210–$186,410 / yearFull timeExperience in engineering and research practices and principles in microelectronics, automotive electronics, highway research, robotics and autonomous systems, metallurgy and materials, asphalt technology, pulp and paper, transportation, energy technology, detection and food safety, cyber-security and information technology or experience in various fields of science that could include mathematics, physical sciences, life sciences, computer science, etc. Qualifications: Bachelor’s Degree in a science-related field or Engineering to include: Aerospace, Biosystems, Chemical, Civil and Environmental, Computer Science and Software, Electrical and Computer, Industrial and Systems, Mechanical and Materials at the time employment begins.
Research Engineer I, S1 University of Alabama in HuntsvilleResearch Engineer I, S1Huntsville, AL$51,304–$58,500 / yearPosition Location Closes Research Engineer I, S1 Alabama The Research Engineer will provide objectives through the development, management, and maintenance of technical work products and documentation, while ensuring high-quality delivery and effective communication with internal and external customers. Purpose of the Position: The Research Engineer will provide objectives through the development, management, and maintenance of technical work products and documentation, while ensuring high-quality delivery and effective communication with internal and external customers.
Research Information Systems Engineer - Professional Georgia Institute of TechnologyResearch Information Systems Engineer - ProfessionalHuntsville, ALOver the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good; breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact. Georgia Techs faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security.
NewAI Training - Open Source CAD Research - Aerospace Engineers - US Prolific Academic LtdAI Training - Open Source CAD Research - Aerospace Engineers - USHuntsville, ALRemoteOnce you have joined the talent pool, you will be asked to complete a short screener (around 10 minutes, compensated at $12/h), and if selected for the project will be asked to take part in tasks of various complexities paying up to $120/ hour . We've built a unique platform that connects researchers and companies with a global pool of participants, enabling the collection of high-quality, ethically sourced human behavioural data and feedback.
Civil Engineer | Land Development Kimley-HornCivil Engineer | Land DevelopmentHuntsville, AlabamaIn addition to strong technical experience, other responsibilities will include research, coordination, project management, staff management, cost estimating, permitting for land disturbance and preparation of bid packages as well as technical specifications. Candidates should have experience with site civil design, permitting, and applicable software applications including hydrology modeling program, storm drainage programs, AutoCAD, and Civil 3D.
Chief Engineer - Technology Development Business Unit Torch TechnologiesChief Engineer - Technology Development Business UnitHuntsville, AlabamaCoordinate with Technical Directors, Program Managers and Business Development Leads to oversee and execute the development of technical roadmaps and strategies to drive innovation and growth across the Business Unit. The successful candidate will have a strong technical background, excellent leadership skills, and a proven track record of driving process rigor in engineering, quality, safety, risk management, and top tech issues management.
Civil Engineer | Land Development Kimley-Horn and Associates IncCivil Engineer | Land DevelopmentHuntsville, ALIn addition to strong technical experience, other responsibilities will include research, coordination, project management, staff management, cost estimating, permitting for land disturbance and preparation of bid packages as well as technical specifications. Candidates should have experience with site civil design, permitting, and applicable software applications including hydrology modeling program, storm drainage programs, AutoCAD, and Civil 3D.
Senior Application Development Engineer ASRC Federal Holding CompanySenior Application Development EngineerRedstone Arsenal, ALEnsure compliance with ACC governance frameworks for uniformity across all business applications and dashboardsIntegrate workflows and business logic within enterprise environments to streamline mission-critical processesPrepare and deliver training and end-user materials for developed solutionsLead the creation and maintenance of detailed technical and non-technical documentation for all developed toolsSupport ticket resolution for application-related issues within established response timelinesInterface with both government and commercial automation platforms to enhance collaboration and knowledge sharingSupport application production environments using cloud and/or on-premise solutions. Prior experience developing and/or integrating REST APIsTroubleshoot production problems related to software applicationsPrior support and delivery of system/administrator, user, and test documentationPrior experience with VantagePrior Work with SMEs, DBAs, and Principal Developers to address database design, data conversion, and data presentationExperience leading technical initiatives within Army 365 or other DoD environmentsFamiliar leveraging AI tools in support of rapid SDLCsUnderstanding of application deployment in the cloud.
Engineer, Software Development Heat Transfer Research IncEngineer, Software DevelopmentHuntsville, ALIdentify, track, and resolve programming bugs; develop and document workarounds for end-users. Interact with engineers to devise how engineering methods are presented to users.
Software Engineer Manager And Full Stack Developer CFD Research CorporationSoftware Engineer Manager And Full Stack DeveloperHuntsville, ALBased in Huntsville, Alabama where laboratory facilities and headquarters are located, CFD Research also has office and laboratory facilities in Dayton, Ohio, prototyping test and evaluation facilities in Hollywood, Alabama, and office facilities in Fort Walton Beach, Florida. You will own the full software development lifecycle for your team's domain, mentor engineers at all levels, partner with stakeholders across the organization to align technical execution with business objectives, and engage with external customers.
Software Engineer Manager and Full Stack Developer CFD Research CorpSoftware Engineer Manager and Full Stack DeveloperHuntsville, ALBased in Huntsville, Alabama where laboratory facilities and headquarters are located, CFD Research also has office and laboratory facilities in Dayton, Ohio, prototyping test and evaluation facilities in Hollywood, Alabama, and office facilities in Fort Walton Beach, Florida. You will own the full software development lifecycle for your team''s domain, mentor engineers at all levels, partner with stakeholders across the organization to align technical execution with business objectives, and engage with external customers.
Lead AI and Data Science Engineer II Deloitte Touche Tohmatsu LtdLead AI and Data Science Engineer IIHuntsville, AL$118,700–$218,600 / yearData science applies statistical analysis, machine learning, and AI to identify meaningful patterns in workforce data, build data and generative artificial intelligence (GenAI) applications, and partner with Talent data engineering teams on pipelines and infrastructure. Collaborate with stakeholders across Talent, business leadership, and ITS to define business needs, identify analytics opportunities, communicate complex technical concepts, and advise on the benefits and limitations of automation and artificial intelligence (AI).
Guidance and Control Engineer for Flight Systems Leidos Holdings IncGuidance and Control Engineer for Flight SystemsHuntsville, AL$69,550–$125,725 / yearBasic Qualifications: Bachelor's degree in engineering or physics and 2-4 years of work or Master's degree in engineering or physics and research in areas such as feedback control system design, trajectory optimization, guidance, and/or optimal estimation with knowledge of basic aerodynamic principles. Leidos is expanding the navigation team due to recent growing programs, such as the AGM-190/A Small Cruise Missile, US SOCOM's GBU 69/B Small Glide Munition, multiple Hypersonic Missile programs, DARPA's Gremlins program, and other rapid development efforts.
Guidance And Control Engineer For Flight Systems Leidos Holdings Inc.Guidance And Control Engineer For Flight SystemsHuntsville, AL$69,550–$125,725 / yearBasic Qualifications: Bachelor's degree in engineering or physics and 2-4 years of work or Master's degree in engineering or physics and research in areas such as feedback control system design, trajectory optimization, guidance, and/or optimal estimation with knowledge of basic aerodynamic principles. Leidos is expanding the navigation team due to recent growing programs, such as the AGM-190/A Small Cruise Missile, US SOCOM's GBU 69/B Small Glide Munition, multiple Hypersonic Missile programs, DARPA's Gremlins program, and other rapid development efforts.
Rotorcraft Flight Dynamics Modeling And Simulation Engineer (Early To Mid Career) CFD Research CorporationRotorcraft Flight Dynamics Modeling And Simulation Engineer (Early To Mid Career)Redstone Arsenal, ALJob Description: The Rotorcraft Flight Dynamics Modeling and Simulation Engineer will support Army rotorcraft engineering efforts through the development, improvement, and application of flight-dynamics models for both legacy fleet and future vertical lift, including models needed for real-time piloted simulations. Advanced flight-dynamics modeling and analysis tools such as Gen Hel, FORECAST, and HeliUM are used to predict the responses of Army rotorcraft under various configurations and flight conditions, including real-time simulation with a pilot in the loop.
Rotorcraft CAD And Layout Engineer CFD Research CorporationRotorcraft CAD And Layout EngineerRedstone Arsenal, ALBased in Huntsville, Alabama where laboratory facilities and headquarters are located, CFD Research also has office and laboratory facilities in Dayton, Ohio, prototyping test and evaluation facilities in Hollywood, Alabama, and office facilities in Fort Walton Beach, Florida. You will create 3D parametric CAD models for the development and evaluation of new aircraft concepts against user requirements and provide technical expertise to Conceptual Design and Assessment (CD&A) branch for future air vehicle concepts and exploration design initiatives.
Rotorcraft Flight Dynamics Modeling and Simulation Engineer CFD Research CorpRotorcraft Flight Dynamics Modeling and Simulation EngineerALJob Description: The Rotorcraft Flight Dynamics Modeling and Simulation Engineer will support Army rotorcraft engineering efforts through the development, improvement, and application of flight-dynamics models for both legacy fleet and future vertical lift, including models needed for real-time piloted simulations. Advanced flight-dynamics modeling and analysis tools such as Gen Hel, FORECAST, and HeliUM are used to predict the responses of Army rotorcraft under various configurations and flight conditions, including real-time simulation with a pilot in the loop.
Rotorcraft CAD and Layout Engineer CFD Research CorpRotorcraft CAD and Layout EngineerALBased in Huntsville, Alabama where laboratory facilities and headquarters are located, CFD Research also has office and laboratory facilities in Dayton, Ohio, prototyping test and evaluation facilities in Hollywood, Alabama, and office facilities in Fort Walton Beach, Florida. You will create 3D parametric CAD models for the development and evaluation of new aircraft concepts against user requirements and provide technical expertise to Conceptual Design and Assessment (CD&A) branch for future air vehicle concepts and exploration design initiatives.
Rotorcraft Flight-Dynamics Modeling and Simulation Engineer Analytical Mechanics AssociatesRotorcraft Flight-Dynamics Modeling and Simulation EngineerHuntsville, AlabamaThe Flight-Dynamics Modeling and Simulation Engineer will support Army rotorcraft engineering efforts through the development, improvement, and application of flight-dynamics models for both enduring fleet and future vertical lift, including models needed for real-time piloted simulations on NASA’s Vertical Motion Simulator (VMS). CIFER processes multi-axes input and output data, either from specifically planned flight test campaigns or from high-fidelity comprehensive analysis, to generate linear models needed for the design and optimization of flight controls and autonomy algorithms for Army rotorcraft.
Junior Missile Modeling and Simulation Engineer Torch Technologies IncJunior Missile Modeling and Simulation EngineerHuntsville, ALTorch Technologies is seeking a highly motivated Junior Missile Modeling and Simulation Engineer to contribute to the development and analysis of advanced missile defense simulations. This role involves designing, implementing, and validating complex simulations to assess system performance, inform design decisions, and support critical defense initiatives.
Modeling And Simulation Integration Engineer Torch Technologies, Inc.Modeling And Simulation Integration EngineerRedstone Arsenal, ALAs a Modeling and Simulation Integration Engineer (Junior), your duties will include the following, but are not limited to: Support the integration, testing, and operation of HWIL simulation environments for MDS Ground Tests, Flight Tests, and continuous integration activities. This role supports the testing and integration of the Missile Defense System (MDS) within a distributed Hardware-In-the-Loop (HWIL) simulation environment for ground and flight test events, as well as broader DoD partner support.
Junior Radar Modeling And Simulation Engineer Torch Technologies, Inc.Junior Radar Modeling And Simulation EngineerHuntsville, ALThis role involves designing, implementing, and validating complex simulations to assess system performance, inform design decisions, and support critical defense initiatives. We are a 100% employee-owned, Certified Great Place To Work and named Best Places to Work in Huntsville/Madison County, headquartered in Huntsville, AL.
Junior Radar Modeling and Simulation Engineer Torch TechnologiesJunior Radar Modeling and Simulation EngineerHuntsville, AlabamaThis role involves designing, implementing, and validating complex simulations to assess system performance, inform design decisions, and support critical defense initiatives. We are a 100% employee-owned, Certified Great Place To Work and named Best Places to Work in Huntsville/Madison County, headquartered in Huntsville, AL.
Modeling and Simulation (M&S) Systems Engineer/Analyst Torch Technologies IncModeling and Simulation (M&S) Systems Engineer/AnalystHuntsville, ALAs a M&S Systems Engineer/Analyst, you will help develop and maintain data reduction and analysis tools, participate in technical interchange meetings, program reviews, integration and test working groups, and support meetings by preparing analyses and reports. The ideal candidate would have a degree in computer science/engineering or electrical engineering, experience in data analysis and processing, and programming experience in Python, MATLAB, C++ and/or Java.
Modeling and Simulation Integration Engineer Torch TechnologiesModeling and Simulation Integration EngineerRedstone Arsenal, AlabamaThis role supports the testing and integration of the Missile Defense System (MDS) within a distributed Hardware-In-the-Loop (HWIL) simulation environment for ground and flight test events, as well as broader DoD partner support. Torch Technologies is seeking a Modeling and Simulation Integration Engineer (Junior) to join our team and support the Missile Defense Agency (MDA) Engineering Directorate Modeling & Simulation (M&S) Office.
Modeling and Simulation Integration Engineer (Junior) Torch Technologies IncModeling and Simulation Integration Engineer (Junior)ALAs a Modeling and Simulation Integration Engineer (Junior), your duties will include the following, but are not limited to: Support the integration, testing, and operation of HWIL simulation environments for MDS Ground Tests, Flight Tests, and continuous integration activities. This role supports the testing and integration of the Missile Defense System (MDS) within a distributed Hardware-In-the-Loop (HWIL) simulation environment for ground and flight test events, as well as broader DoD partner support.
Modeling And Simulation (M&S) Systems Engineer/Analyst Torch Technologies, Inc.Modeling And Simulation (M&S) Systems Engineer/AnalystHuntsville, ALAs a M&S Systems Engineer/Analyst, you will help develop and maintain data reduction and analysis tools, participate in technical interchange meetings, program reviews, integration and test working groups, and support meetings by preparing analyses and reports. The ideal candidate would have a degree in computer science/engineering or electrical engineering, experience in data analysis and processing, and programming experience in Python, MATLAB, C++ and/or Java.
NewModeling and Simulation Engineer deciBel Research, Inc.Modeling and Simulation EngineerHuntsville, ALFull timeFamiliarity with the Joint Track Management Capability BridgeExperience with common DoD simulation frameworks such as AFSIM, FSI, DIS, or other environmentsFamiliarity with translating operational scenarios or "kill webs" into quantitative simulation environmentsExperience in Python, Java, Matlab, Gitlab, and/or LinuxApplicant selected must have an active Secret security clearance, with an ability to obtain a Top Secret clearance. Responsibilities Include:Design, code, and test high-fidelity mathematical models and simulations of IAMD components (e.g., sensors, interceptors, and threat kinematics).Integrate disparate system models into both real-time (e.g., Hardware-in-the-Loop/Software-in-the-Loop) and non-real-time (constructive) simulation frameworks.
Rotorcraft Flight Controls And Handling Qualities Engineer (Early To Mid-Career) CFD Research CorporationRotorcraft Flight Controls And Handling Qualities Engineer (Early To Mid-Career)Redstone Arsenal, ALJob Description: The Rotorcraft Flight Controls and Handling Qualities Engineer will support Army rotorcraft engineering efforts through the development, improvement, and application of flight control systems for both legacy fleet and future vertical lift, including control laws needed for piloted simulations. Based in Huntsville, Alabama where laboratory facilities and headquarters are located, CFD Research also has office and laboratory facilities in Dayton, Ohio, prototyping test and evaluation facilities in Hollywood, Alabama, and office facilities in Fort Walton Beach, Florida.
Rotorcraft Flight Controls and Handling Qualities Engineer Early to Mid-Career CFD Research CorpRotorcraft Flight Controls and Handling Qualities Engineer Early to Mid-CareerALJob Description: The Rotorcraft Flight Controls and Handling Qualities Engineer will support Army rotorcraft engineering efforts through the development, improvement, and application of flight control systems for both legacy fleet and future vertical lift, including control laws needed for piloted simulations. Based in Huntsville, Alabama where laboratory facilities and headquarters are located, CFD Research also has office and laboratory facilities in Dayton, Ohio, prototyping test and evaluation facilities in Hollywood, Alabama, and office facilities in Fort Walton Beach, Florida.
Senior Dynamics And Controls Engineer CFD Research CorporationSenior Dynamics And Controls EngineerHuntsville, ALWe are searching for highly qualified candidates to support the design, development, and oversight of the Human Lander Systems Program in the Control Systems Design and Analysis branch at NASA's Marshall Space Flight Center as a Dynamics, Controls, Modeling, Simulation, and Analysis Subject Matter Expert. Required skills/experience: Ability to work problems from first principles, including derivation of dynamics equations of motion, including both nonlinear equations and linear state equations and integrate subsystem models into larger simulations.
Senior Dynamics and Controls Engineer CFD Research CorpSenior Dynamics and Controls EngineerHuntsville, ALWe are searching for highly qualified candidates to support the design, development, and oversight of the Human Lander Systems Program in the Control Systems Design and Analysis branch at NASA's Marshall Space Flight Center as a Dynamics, Controls, Modeling, Simulation, and Analysis Subject Matter Expert. Required skills/experience: Ability to work problems from first principles, including derivation of dynamics equations of motion, including both nonlinear equations and linear state equations and integrate subsystem models into larger simulations.
Systems Engineer - Modeling and Algorithms WILLCORSystems Engineer - Modeling and AlgorithmsHuntsville, AlabamaThe Systems Engineer Modeling and Algorithms will be responsible for overseeing and actively contributing to high-visibility design projects and digital simulation testing. This role offers a unique opportunity to engage with cutting-edge technology and collaborate with industry experts on high-impact projects in a dynamic environment.
NewCounter-Countermeasure and Threat Discrimination Program Engineer (MDA) Mission Driven ResearchCounter-Countermeasure and Threat Discrimination Program Engineer (MDA)Huntsville, ALFull timeIf you are interested in applying for employment with Mission Driven Research and need special assistance or an accommodation to use our website, please contact us by email (hr@missiondrivenresearch.com) or by phone by calling (256) 299-9288. In this role you will provide systems analysis expertise to develop new Missile Defense System capabilities to identify lethal objects.
Senior FPGA and SDR Engineer Qualis CorpSenior FPGA and SDR EngineerHuntsville, ALThe ideal candidate possesses a strong background in FPGA development, digital signal processing, and SDR architectures, and is excited to work on challenging problems involving wideband RF sensing, electronic warfare, remote system operation, advanced communications, and emerging AI-enabled RF technologies. This individual will serve as a key contributor in the design and implementation of digital signal processing architectures, software-defined radio (SDR) platforms, and FPGA-based processing solutions for government and commercial customers.
Modeling and Simulation Engineer: HSV-26128 Decibel Research IncModeling and Simulation Engineer: HSV-26128Huntsville, ALPosition Description: MDA Joint Integrated Fire Control is seeking Modeling & Simulation (M&S) Engineers with a background in Electrical, Aerospace, or Mechanical Engineering to join our rapidly growing Mission Engineering team. Integration Expertise: Proven ability to integrate models into larger simulation architectures, managing data exchange, simulation timing, and data collection pipelines for post-run analysis.
Senior Positioning, Navigation, and Timing (PNT) Modeling & Simulation Engineer (PNT) Cintel IncSenior Positioning, Navigation, and Timing (PNT) Modeling & Simulation Engineer (PNT)Huntsville, ALThe successful candidate will work alongside government engineers, operational analysts, and technical teams to develop defensible analytical products, evaluate emerging PNT technologies, and build data-driven mission analysis cases that support acquisition decisions, technology maturation, experimentation, and operational planning. ABOUT CINTEL, INC: Cintel Inc. is a Small Business providing strategies and services to support an array of Government clients in Software Development, Operational/Tactical and Installation/Facilities Energy, Cyber Security, Modeling and Simulation, Data Science, and Programmatic support.
Position Navigation and Timing Engineer NTA, Inc.Position Navigation and Timing EngineerHuntsville, ALNTA, Inc. is a locally recognized Best Place to Work and Best Place for Working Parents specializing in technical services centered on research, development, integration, demonstration and evaluation of various missile and aviation system technologies with a focus in Position, Navigation, and Timing (PNT) and Guidance, Navigation, and Control (GNC) technologies. Our engineering expertise and leading-edge technology foster strong customer relationships, a challenging work environment, and limitless employee opportunities in the realm of supporting the Warfighter.
Guidance and Control Engineer for Flight Systems LeidosGuidance and Control Engineer for Flight SystemsHuntsville, AlabamaLeidos is expanding the navigation team due to recent growing programs, such as the AGM-190/A Small Cruise Missile, US SOCOM’s GBU 69/B Small Glide Munition, multiple Hypersonic Missile programs, DARPA’s Gremlins program, and other rapid development efforts. Bachelor’s degree in engineering or physics and 2-4 years of work or Master’s degree in engineering or physics and research in areas such as feedback control system design, trajectory optimization, guidance, and/or optimal estimation with knowledge of basic aerodynamic principles.
Composites Materials and Process Engineer Syensqo SAComposites Materials and Process EngineerHuntsville, ALCustomerComposites Materials and Process Engineer Engineering is the technical excellence organization within Customer Engineering, responsible for driving growth and customer satisfaction by leading the development and adoption of new and existing technologies in the composites industry. Minimum 5 years demonstrated work experience including: problem solving, research and development, project management, effective communication with stakeholders, relationship building, and identification of new opportunities in aerospace composite structures.
Modeling and Simulation Engineer Mid-Level Aviation & Missile SolutionsModeling and Simulation Engineer Mid-LevelHuntsville, ALAMS) is seeking a talented Engineer with a degree in Electrical Engineering, Computer Engineering, Computer Science, Physics and/or Mathematics to join our diverse team, in Huntsville, AL., to create unique solutions for complex problems. The Engineer performing this role will perform the following: The candidate will work with other modelers, researchers, and study leads to build models, simulations, conduct analysis, and provide results.
Patriot Interoperability Test and Evaluation Engineer COLSAPatriot Interoperability Test and Evaluation EngineerHuntsville, ALThe position requires the Test and Evaluation Engineer to provide Interoperability subject matter expertise, analyze platform documentation to provide direction to meet platform interoperability requirements, as well as provide support to assist systems in achieving communication link certifications including, but not limited to, Army Interoperability Certification (AIC) and Joint Interoperability Test Command (JITC) Certification. Author/develop detailed test reports and technical white papers as required to include performing independent analysis of the test data, reviewing analysis results from other team members, reconciling discrepancies, and organizing results for report/presentation.
NewSenior Network Engineer for Operations and Maintenance - Huntsville LaunchTechSenior Network Engineer for Operations and Maintenance - HuntsvilleHuntsville, ALGenerate/provide status reports, provide network anomaly analysis, and develop engineering red lines as needed to support network maintenance actions, engineering changes/upgrades, and security vulnerabilities. Must be proficient in routing and switching protocols to include BGP, OSPF, STP, TCP/UDP, voice, video, VPN/VRF, subnetting, DHCP, DNS, SD-WAN, SD-Access, ISE, DNAC, etc.
NewEngines: Materials and Processes Engineer I - Early Career (2026 Starts) Blue Origin Enterprises LPEngines: Materials and Processes Engineer I - Early Career (2026 Starts)Huntsville, AL$81,313–$113,837.85 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing, vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Research Associate IV, S2 University of Alabama in HuntsvilleResearch Associate IV, S2Huntsville, AL$66,490–$70,320 / yearPosition Location Closes Research Associate IV, S2 Alabama The selected Research Associate candidate will support the Office of Data Science and Informatics (ODSI) within the Lab for Applied Science (LAS) under the Earth System Science Center (ESSC) at UAH. Purpose of the Position: The selected Research Associate candidate will support the Office of Data Science and Informatics (ODSI) within the Lab for Applied Science (LAS) under the Earth System Science Center (ESSC) at UAH.
Senior Research Technician, S4 University of Alabama in HuntsvilleSenior Research Technician, S4Huntsville, AL$65,000–$75,000 / yearPosition Location Closes Senior Research Technician, S4 Alabama The Research Technician supports the maintenance, preparation, and operation of launcher systems for ballistic testing and research at the USASMDC-TC Aerophysics Research Facility on Redstone Arsenal, Al. Coordinate and collaborate with engineers, scientists, and technical staff to support sponsor-directed research and contribute to overall facility operations.