UNKNOWN

FEED

This is a highly technical position that requires practical experience in manufacturing engineering and new product development through to stabilized production for an array of fabrication processes (components and assemblies) used in rockets and rocket engines. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

SpaceX

Manufacturing Engineer, Supply Chain (Starship)

ea_via_bold

Perform dynamic testing from start to finish, including pre-test analysis, sensor selection and installation, test execution, data analysis, signal processing, and model validation. We are seeking a highly skilled Load & Dynamics Engineer to join our team working on cutting-edge autonomous surface vessels (ASVs) for the Department of Defense (DoD).

Saronic Technologies Inc

Loads & Dynamics Engineer

linkup_via_bold

Design the fluid system around the machine: piping, valves, headers, relief and isolation, sized against the pressure-drop budget the cycle can afford and the pressures the fluid actually runs at. We are taking compressor and chiller design in house, working on machine architectures nobody sells today, and going from blank sheet to production faster than this industry thinks is possible.

Fluidstack Ltd

Fluids / Mechanical Engineer, R&D

This position requires an independent, self-motivated, highly skilled Engineer with experience and extensive knowledge of Quality in a manufacturing facility to manage and oversee product with minimal oversight and guidance on timelines shorter than usual in the industry. ITAR Requirements: To comply with U.S. Government space technology export regulations, including ITAR, you must be a U.S. citizen, a lawful permanent resident of the U.S., a protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain required authorizations from the U.S. Department of State.

X-Bow Launch Systems Inc

Process Quality Engineer

Ability and willingness to perform hands-on work at temporary outdoor field sites in varying weather conditions, including moving and deploying equipment, erecting portable antenna systems, and installing network, RF, and camera equipment at varying heights. Set up, operate, troubleshoot, and tear down temporary field communications sites, including network infrastructure, radios, portable antenna systems, IP cameras, cabling, and related equipment.

Venus Aerospace

Network & RF Administrator

Any unsolicited submission - via email, our website, social media, or directly to an employee - will be deemed the property of Relativity Space, and no fee will be owed absent a current, fully executed agreement with Talent Acquisition that specifically authorizes submissions for the applicable role. Our team partners heavily with manufacturing, test, launch, and integration teams, striving to develop our engines in record time and to support Terran R's first launch in 2026.

YEAR

Relativity Space

Principal Turbomachinery Engineer, Turbine Development

FULL_TIME

The Role: IT Business Application Analyst Venus Aerospace is seeking an IT Business Applications Analyst to partner with departments across the organization to understand their processes, identify business needs, and implement technology solutions that improve how they work. With the first generational leap in rocket engine technology since Apollo, our proprietary Rotating Detonation Rocket Engine and Venus Detonation Ramjets deliver historic efficiency and performance across aerospace applications.

IT Business Application Analyst

lever_via_bold

The Test Planner defines and sequences all forms of testing required to bring a vessel from fabrication through commissioning and delivery, covering structural/tank testing, piping system testing, electrical testing, machinery and propulsion trials, and vessel-level dock and sea trials. The Test Planner ensures these tests happen in the right order, at the right stage of construction, without forcing rework or blocking downstream trades, and draws on experience from other shipyard programs to anticipate sequencing issues before they surface.

Saronic

Manufacturing Engineer - Test Planner

In this role, youll play a pivotal part in repairing airline customer seat assembles and sub-components, partially or completely, replacing parts and sub-assemblies, and test/triage/assess by performing the following duties as directed by OEM and/or airline customer drawings, maintenance manuals, engineering instruction and other technical publications. Company: Safran Seats Job field: Manufacture / assembly and repair Location: Gainesville, Texas, United States Contract type: Permanent Contract duration: Full-time Required degree: High School Diploma/GED Equivalent Required experience: First experience Professional status: Technician Spoken language(s): English Fluent Salary range: market rate ITAR: ITAR Controlled position.

Safran SA

Repair Station Technician

Experience in guiding and mentoring Systems Engineers at various experience levels, helping them develop their technical skills, leadership capabilities, and understanding of aerospace systems engineering principles. As one of the most geographically diverse international defense companies, we deliver a full range of products and services spanning air, land, maritime, space, and cyber, including advanced electronics, intelligence solutions, and dedicated customer support.

BAE Systems Plc

Systems Engineering Discipline Manager

The Systems Engineering team is accountable for requirements, interfaces, and test planning - it will be your responsibility to validate the system architecture, manage technical budgets and design configuration between departments, develop test plans, ensure verification of requirements, and support mission operations. We welcome you to join Firefly as a Spacecraft Systems Engineer, to leverage your creative and technical expertise for the development of Blue Ghost and Elytra spacecraft over the product lifecycle from concept through fabrication, test & flight.

Firefly Aerospace Inc

Spacecraft Systems Engineer II

Design, commission, and operate mission-critical fluid systems across a growing portfolio of launch sites, from historical US-based pads to greenfield builds in extreme locations including Wallops Flight Facility and Esrange, Sweden. Design, build, and activate new fluid systems across a global launch portfolio including Vandenberg Space Force Base (CA), Wallops Flight Facility (VA), Cape Canaveral Space Force Station (FL), and Esrange Space Center (Sweden).

Launch Engineer-Fluids Systems IV

CACI is looking for an experienced Space Vehicle Flight Software Systems Engineer to work with NASA on its Commercial Spacecraft including Commercial Crew Vehicles for transporting astronauts to and from the International Space Station (ISS), Human Landing System Vehicle for transporting astronauts to and from the lunar surface, and U.S. Deorbit Vehicle to safety deorbit the ISS when retired. Job Title: NASA Commercial Spacecraft Flight Software Systems EngineerJob Category: EngineeringTime Type: Full timeMinimum Clearance Required to Start: NACIEmployee Type: RegularPercentage of Travel Required: Up to 10%Type of Travel: Continental US* * * The Opportunity:

<span itemprop="name">CACI</span> provides information solutions and services in support of national security missions and government transformation for Intelligence, Defense, and Federal Civilian customers. A member of the Fortune 1000 Largest Companies, the Russell 2000 Index, and the S&amp;P SmallCap 600 Index, CACI provides dynamic careers for over 15,800 employees working in over 120 offices worldwide. Visit <a href="http://www.caci.com" target="_blank" itemprop="url" mns_rt="Company">www.caci.com</a>.<br/>
      <br/>
      We strive to sustain a corporate culture based on integrity - one that's focused on treating customers ethically and making their priorities our priorities. We pride ourselves in finding and hiring people with the highest intellectual capital, and providing them with challenging opportunities and encouraging their innovation and initiative.

CACI

NASA Commercial Spacecraft Flight Software Systems Engineer

You will play a key role in prototype builds, new product introduction (NPI), production readiness, and production ramp-up while driving improvements in manufacturability, quality, throughput, and cost. In this role, you will own one or more aircraft systems throughout the product lifecycle, partnering with Design Engineering, Operations, Quality, Supply Chain, and Program Management to transition products from development into production.

Shield

Senior Engineer, Manufacturing

sourcestack_via_bold

SUMMARY: The Satellite Integration Manufacturing Engineer is responsible for planning, developing, and supporting integration and assembly processes for satellite subsystems and full spacecraft. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today’s five billion mobile subscribers and finally bring broadband to the billions who remain unconnected.

AST SpaceMobile

Manufacturing Engineer, Satellite Integration

Work directly with manufacturing and test organizations to understand existing workflows, identify inefficiencies, and design software solutions that significantly improve operational visibility, data quality, and engineering productivity. You will partner directly with manufacturing engineers, test engineers, quality, IT, and software engineering to ensure every significant engineering event occurring in the physical world becomes structured, traceable, and immediately available throughout the enterprise.

Test & Operations Integration Engineer (Product Test Engineering Background)

The Senior Electrical Engineer will work closely with mechanical, software, systems, autonomy, and test engineering teams to deliver reliable undersea platforms and payloads capable of operating in demanding subsea conditions. We are seeking a Senior Electrical Engineer to lead the design, development, integration, and testing of advanced electrical and electronic systems for unmanned underwater vehicles, undersea sensors, and subsea mission systems .

Saronic Technologies

Electrical Engineer – UUVs & Undersea Electronics

Understanding and working knowledge and characteristics of magnetics (including inductor/transformer modeling), magnetization inductance, magnetization current, leakage inductance, intra-winding and inter-winding capacitance, self-resonant frequency, characteristics and limitations of magnetic cores, core saturation, core loss, high frequency losses, and winding techniques for optimization of desired magnetics. LaunchPoint designs and manufactures lightweight, high-specific-power motors, starter/generators and alternators for combat aircraft, uncrewed aircraft systems, drones and airborne pods.

Launchpoint Electric Propulsion Solutions, Inc.

Electrical Engineer II

This internship is ideal for students pursuing Mechanical Engineering, Aerospace Engineering, Mechatronics, Robotics, or a related field, and eager to make an impact in the defense technology industry. Saronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms.

Mechanical Engineer Intern (Summer 2027)

Proficiency with CFD solvers commonly used in aerospace/defense aerodynamics (e.g., CFD++, OVERFLOW, FUN3D, STAR-CCM+, or ANSYS Fluent ) for compressible, high-speed flow, along with meshing and grid-generation tools such as Pointwise, ANSA, and Chimera Grid Tools, and overset grid assembly for complex multi-body geometries. In this role, you will lead computational fluid dynamics (CFD) analysis to characterize the aerodynamic and ballistic performance of Zone 5's air-launched effects, tactical interceptors, and next-generation munitions — from early concept and trade studies through wind tunnel and flight test correlation to fielded performance.

Propulsion Engineer Jobs in Texas

Manufacturing Engineer, Supply Chain (Starship) SpaceX

Loads & Dynamics Engineer Saronic Technologies Inc

Fluids / Mechanical Engineer, R&D Fluidstack Ltd

Process Quality Engineer X-Bow Launch Systems Inc

Network & RF Administrator Venus Aerospace

Principal Turbomachinery Engineer, Turbine Development Relativity Space

IT Business Application Analyst Venus Aerospace

Manufacturing Engineer - Test Planner Saronic

Repair Station Technician Safran SA

Systems Engineering Discipline Manager BAE Systems Plc

Spacecraft Systems Engineer II Firefly Aerospace Inc

Launch Engineer-Fluids Systems IV Firefly Aerospace Inc

NASA Commercial Spacecraft Flight Software Systems Engineer CACI

Senior Engineer, Manufacturing Shield

Manufacturing Engineer, Satellite Integration AST SpaceMobile

Test & Operations Integration Engineer (Product Test Engineering Background) X-Bow Launch Systems Inc

Electrical Engineer – UUVs & Undersea Electronics Saronic Technologies

Electrical Engineer II Launchpoint Electric Propulsion Solutions, Inc.

Mechanical Engineer Intern (Summer 2027) Saronic Technologies

Lead CFD Engineer - Weapon Performance Zone 5 Technologies

Similar Job Searches

Stand out to leading employers.