UNKNOWN

FEED

Experience debugging software using: JTAG/SWD or equivalent debugging interfaces, Logic Analyzers, Oscilloscopes, Serial/Network interfaces, Embedded tracing/logging tools. The Role: Embedded Software Engineer We are seeking a talented Embedded Software Engineer to help develop the flight software that powers our next-generation avionics and flight computer systems.

Venus Aerospace

Embedded Software Engineer

ea_via_bold

Must have a Bachelors degree in Mechanical Engineering, Aerospace Engineering Aeronautical Engineering, Mechanical Engineering Technology, Design Engineering, Automotive Engineering, Manufacturing Engineering, Manufacturing Engineering Technology, Mechanical and Energy Engineering or a related engineering degree (minimum of 12 years equivalent related engineering experience will be considered in lieu of Bachelors degree) OR. Must have a Masters degree in Mechanical Engineering, Aerospace Engineering Aeronautical Engineering, Mechanical Engineering Technology, Design Engineering, Automotive Engineering, Manufacturing Engineering, Manufacturing Engineering Technology, Mechanical and Energy Engineering or a related engineering degree.

Safran SA

Design Engineer 3

linkup_via_bold

We are taking compressor and chiller design in house, working on machine architectures nobody sells today, and going from blank sheet to production faster than this industry thinks is possible. Specify and integrate the drive for a high-speed hermetic motor, including the switching, thermal, bearing-current and insulation questions that follow from running a machine fast.

Fluidstack

Power Electronics Engineer, Thermofluids

Must have solid knowledge of manufacturing and related operations with detailed knowledge of such fields as product design, engineering function, tool design, tool fabrication, ergonomics and EHS, N/C machinery and equipment, factory methods work, etc…. With more than one million seats installed across the fleets of the worlds leading airlines, Safran Seats is one of the global leaders in passenger, crew, aircraft and helicopter seating, delivering innovative, high value-added solutions.

Manufacturing Engineer 2

To achieve this, the Cost Engineer collaborates closely with cross-functional teams: contributing to discussions regarding cost-effective design concepts, assisting Purchasing in supplier negotiations and should cost analysis, supporting Operations in optimizing the make/buy process and labor efficiency, and working with Program Management to monitor recurring costs and overall profitability. With more than one million seats installed across the fleets of the worlds leading airlines, Safran Seats is one of the global leaders in passenger, crew, aircraft and helicopter seating, delivering innovative, high value-added solutions.

Lead Cost Engineer

With more than one million seats installed across the fleets of the worlds leading airlines, Safran Seats is one of the global leaders in passenger, crew, aircraft and helicopter seating, delivering innovative, high value-added solutions. Must have a Bachelor of Engineering degree in Material Science, Aeronautical, Aerospace, Mechanical, Mechanical Engineering Technology, Manufacturing, Industrial, Electrical, or Systems Engineering or 12 years equivalent related experience in lieu of degree.

Project Engineer

Company: Safran Electronics & Defense, Avionics USA Job field: Mechanics Location: Grand Prairie, Texas, United States Contract type: Permanent Contract duration: Full-time Required degree: Bachelors Degree Required experience: More than 3 years Professional status: Employees / Staff Salary range: Based on Market Rate ITAR: ITAR Controlled position. Provide Technical Support/Assistance related to Aeronautic repair station; interact and collaborate with cross-functional teams, operations, quality, program management, suppliers and customers to resolve problems and implement solutions.

Product Support Engineer

Company: Safran Seats Job field: Industrial Engineering Location: Gainesville, Texas, United States Contract type: Permanent Contract duration: Full-time Required degree: Bachelors Degree Required experience: More than 5 years Professional status: Professional, Engineer & Manager Salary range: based on experience ITAR: ITAR Controlled position. Must have solid knowledge of manufacturing and related operations with detailed knowledge of such fields as product design, engineering function, tool design, tool fabrication, ergonomics and EHS, N/C machinery and equipment, factory methods work, etc….

Manufacturing Engineer 2 (Friday, Saturday Sunday)

Today, driven by the vision of leading humanity's journey off planet, Axiom Space is the principal provider of commercial human spaceflight services to the International Space Station and developer of advanced spacesuits for the Moon and low-Earth orbit. Serving as a cornerstone for sustained human presence in space, this next-generation orbital platform fosters groundbreaking innovation and research in microgravity, and cultivates the vibrant, global space economy of tomorrow.

Axiom Space

Guidance, Navigation, & Controls (GNC), Controls Engineer

sourcestack_via_bold

With more than one million seats installed across the fleets of the worlds leading airlines, Safran Seats is one of the global leaders in passenger, crew, aircraft and helicopter seating, delivering innovative, high value-added solutions. With a focus on quality and new ideas, the Gainesville facility helps keep Safran at the forefront of the aviation seating industry, working closely with airlines and aircraft makers to deliver seats passengers appreciate.

Electrical Design Engineer 1

Axiom Space LLC

This is a highly technical position that requires practical experience in manufacturing engineering and new product development through to stabilized production for an array of fabrication processes (components and assemblies) used in rockets and rocket engines. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

SpaceX

Manufacturing Engineer, Supply Chain (Starship)

Perform dynamic testing from start to finish, including pre-test analysis, sensor selection and installation, test execution, data analysis, signal processing, and model validation. We are seeking a highly skilled Load & Dynamics Engineer to join our team working on cutting-edge autonomous surface vessels (ASVs) for the Department of Defense (DoD).

Saronic Technologies Inc

Loads & Dynamics Engineer

Design the fluid system around the machine: piping, valves, headers, relief and isolation, sized against the pressure-drop budget the cycle can afford and the pressures the fluid actually runs at. We are taking compressor and chiller design in house, working on machine architectures nobody sells today, and going from blank sheet to production faster than this industry thinks is possible.

Fluidstack Ltd

Fluids / Mechanical Engineer, R&D

This position requires an independent, self-motivated, highly skilled Engineer with experience and extensive knowledge of Quality in a manufacturing facility to manage and oversee product with minimal oversight and guidance on timelines shorter than usual in the industry. ITAR Requirements: To comply with U.S. Government space technology export regulations, including ITAR, you must be a U.S. citizen, a lawful permanent resident of the U.S., a protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain required authorizations from the U.S. Department of State.

X-Bow Launch Systems Inc

Process Quality Engineer

Ability and willingness to perform hands-on work at temporary outdoor field sites in varying weather conditions, including moving and deploying equipment, erecting portable antenna systems, and installing network, RF, and camera equipment at varying heights. Set up, operate, troubleshoot, and tear down temporary field communications sites, including network infrastructure, radios, portable antenna systems, IP cameras, cabling, and related equipment.

Network & RF Administrator

Any unsolicited submission - via email, our website, social media, or directly to an employee - will be deemed the property of Relativity Space, and no fee will be owed absent a current, fully executed agreement with Talent Acquisition that specifically authorizes submissions for the applicable role. Our team partners heavily with manufacturing, test, launch, and integration teams, striving to develop our engines in record time and to support Terran R's first launch in 2026.

YEAR

Relativity Space

Principal Turbomachinery Engineer, Turbine Development

FULL_TIME

The Role: IT Business Application Analyst Venus Aerospace is seeking an IT Business Applications Analyst to partner with departments across the organization to understand their processes, identify business needs, and implement technology solutions that improve how they work. With the first generational leap in rocket engine technology since Apollo, our proprietary Rotating Detonation Rocket Engine and Venus Detonation Ramjets deliver historic efficiency and performance across aerospace applications.

IT Business Application Analyst

lever_via_bold

The Test Planner defines and sequences all forms of testing required to bring a vessel from fabrication through commissioning and delivery, covering structural/tank testing, piping system testing, electrical testing, machinery and propulsion trials, and vessel-level dock and sea trials. The Test Planner ensures these tests happen in the right order, at the right stage of construction, without forcing rework or blocking downstream trades, and draws on experience from other shipyard programs to anticipate sequencing issues before they surface.

Saronic

Manufacturing Engineer - Test Planner

In this role, youll play a pivotal part in repairing airline customer seat assembles and sub-components, partially or completely, replacing parts and sub-assemblies, and test/triage/assess by performing the following duties as directed by OEM and/or airline customer drawings, maintenance manuals, engineering instruction and other technical publications. Company: Safran Seats Job field: Manufacture / assembly and repair Location: Gainesville, Texas, United States Contract type: Permanent Contract duration: Full-time Required degree: High School Diploma/GED Equivalent Required experience: First experience Professional status: Technician Spoken language(s): English Fluent Salary range: market rate ITAR: ITAR Controlled position.

Propulsion Engineer Jobs in Texas

Embedded Software Engineer Venus Aerospace

Design Engineer 3 Safran SA

Power Electronics Engineer, Thermofluids Fluidstack

Manufacturing Engineer 2 Safran SA

Lead Cost Engineer Safran SA

Project Engineer Safran SA

Product Support Engineer Safran SA

Manufacturing Engineer 2 (Friday, Saturday Sunday) Safran SA

Guidance, Navigation, & Controls (GNC), Controls Engineer Axiom Space

Electrical Design Engineer 1 Safran SA

Guidance, Navigation, & Controls (GNC), Controls Engineer Axiom Space LLC

Manufacturing Engineer, Supply Chain (Starship) SpaceX

Loads & Dynamics Engineer Saronic Technologies Inc

Fluids / Mechanical Engineer, R&D Fluidstack Ltd

Process Quality Engineer X-Bow Launch Systems Inc

Network & RF Administrator Venus Aerospace

Principal Turbomachinery Engineer, Turbine Development Relativity Space

IT Business Application Analyst Venus Aerospace

Manufacturing Engineer - Test Planner Saronic

Repair Station Technician Safran SA

Similar Job Searches

Stand out to leading employers.