UNKNOWN

FEED

EPSE engineers work the entire system life cycle from 1) control system technology development, 2) interpreting customer requirements, decomposing them to hardware and software, 3) technical and project oversight of hardware implementation, to 4) ensuring control system compliance across engine, flight and customer compliance testing, and finally, 5) leading system and hardware field issue triage and resolution. EPSE engineers apply skills from across a wide range of PW Engineering disciplines such as Performance, Operability, Mechanical Disciplines, Aerothermal Management, to develop, integrate and certify subsystems and hardware for Civil and Military customers.

Senior Engineer, Electric Propulsion Systems P3 (Onsite)

The product group is growing rapidly, with approximately 50% growth anticipated next year, creating plenty of engineering work around process development, tooling, documentation, manufacturing improvement and production expansion. This is an engineering-driven manufacturing organization with experienced Manufacturing Engineers and dedicated internal resources in tooling, product engineering and automation.

EPS Connects

Manufacturing Engineer

Ranked among the best EdTech Companies in America, Finalsite supports more than 7,000 schools and districts worldwide with an integrated platform for websites, communications, mobile apps, enrollment, and marketing services. You lead disaster recovery planning for the platforms you own, including backup design, failover planning, and clear recovery objectives (RTO/RPO), and you architect highly available, fault-tolerant systems.

Finalsite

Staff Site Reliability Engineer

JobScore

Across the Nation, notable projects that Becho has worked on include the California High Speed Rail, Fresno CA, Purple Line 2 and 3 MTA Stations in Los Angeles, the LAX Metro Connector, Union Market Street MTA Station, Transbay in San Francisco, and Hudson Yards, Henry Hudson Bridge, East Side Access in New York, and the Southwest Green Line in Minneapolis. We also provides the equipment necessary to support any efforts, from tieback drills, top drive rotary drills and service cranes to crane-mounted drill rigs, low overhead drill rigs and rotator drilling systems.

Tutor Perini

Project Engineer

Internal Contacts: Liaisons with other DDE team members, Lead-Distribution Design Engineer, Manager - Distribution Design, and Manager-Electric Field Operations. Responsible for assigned circuit performance including load growth, voltage profiles, fault studies and reliability studies and initiating work requests/projects where needed to improve performance.

YEAR

Eversource Energy

Distribution Design Engineer (Hybrid)

Project Management Consultant (Electrical Engineer), you will provide professional electrical engineering and project management experience on designated projects and assignments for the East Hartford or Middletown campus and facilities. Monitor and coordinate the execution of the various services and process projects including capital improvements, physical plant and infrastructure upgrades, equipment relocations/installations, maintenance, and repair work.

<p> CBRE Group, Inc., a Fortune 500 and S&P 500 company headquartered in Los Angeles, is the world’s largest commercial real estate services and investment firm (in terms of 2014 revenue). The Company has more than 70,000 employees (excluding affiliates), and serves real estate owners, investors and occupiers through more than 400 offices (excluding affiliates) worldwide. CBRE offers strategic advice and execution for property sales and leasing; corporate services; property, facilities and project management; mortgage banking; appraisal and valuation; development services; investment management; and research and consulting.  <br/><br/>  As an employee at CBRE, you have the freedom to make your own path. Your career is in your own hands; there’s no need to wait to be shown the way. "It’s about how well you perform, not just how long you’ve worked here and you're encouraged to take intelligent risks and explore new ideas and innovations. Our scale gives you mobility and a broader choice of opportunities. You'll always have a team behind you. </p>

CBRE Group Inc

Project Management Sr Consultant (Electrical Engineer)

Opportunities are available for Electrical, Mechanical and other engineers within D465, the Electrical Components Department, to develop various engineered components for submarine applications working with other Electric Boat, Navy, and outside supplier personnel. Supporting development of associated technical documentation including: technical manuals operating instructions, ship system manuals, test forms, repair parts lists, procurement specifications, etc.

General Dynamics Corp

Engineer - Systems

For more than 85 years, our team at Precision Fuzing and Sensors has designed, tested, and manufactured the fuzing and sensor systems that defense programs depend on - delivering mission-critical reliability from a single, vertically integrated facility in Middletown, Connecticut. Precision Fuzing & Sensors has spent more than eight decades at the forefront of fuzing technology for defense and aerospace applications, trusted by every branch of the U.S. military and allied nations across the globe.

Kaman Corp

Quality Engineer I

Drive completion of actions supporting construction, ensure readiness for hardware delivery, reassembly, major move evolutions, component land and key events, including coordination and execution of multidisciplinary engineering evaluations to support construction needs. D489 engineers are responsible for the assembly, integration, outfitting, test, and problem resolution of delivered TG sets for the state-of-the-art electric drive propulsion system on COLUMBIA Class submarine.

Electric Boat Corp

Turbine Generator (TG) Set Engineer

Circuit design; using sound theoretical and analytics using circuit simulators (such as PSPICE or equivalent electronic analysis tools), schematic capture and circuit board layout using an integrated design tool such as Altima or ORCAD.Through use of LabVIEW, maintain software using techniques of source control. For more than 85 years, our team at Precision Fuzing and Sensors has designed, tested, and manufactured the fuzing and sensor systems that defense programs depend on - delivering mission-critical reliability from a single, vertically integrated facility in Middletown, Connecticut.

Kaman Corporation

Test Engineer II

ea_via_bold

Maintain the supplier rating system, which will define the total cost of ownership of products procured from suppliers including performing supplier source inspections, first article inspections, supplier surveys and audits assuring supplier corrective action where required. Coordinate Supplier Manufacturing Readiness Reviews and manage Supplier Request for Variance (when applicable).The Supplier Quality Engineer will conduct capability assessments that verify supplier qualifications, travel to assigned suppliers, and lead multiple projects to completion.

Supplier Quality Engineer

For more than 85 years, our team at Precision Fuzing and Sensors has designed, tested, and manufactured the fuzing and sensor systems that defense programs depend on - delivering mission-critical reliability from a single, vertically integrated facility in Middletown, Connecticut. Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, or a related field.2-5 years of experience in tooling design, manufacturing engineering, or a related role, preferably in an assembly or production environment.

Design Engineer II, Tooling

Bachelor's degree in Materials Science Engineering, Chemical Engineering, Mechanical Engineering or related Science, Technology, Engineering or Mathematics (STEM) major obtained by start date. The Materials & Processes Engineering and Mechanical Disciplines (MPE + MD) department is seeking talented engineering candidates to join our Engineering Development Program.

RTX Corp

Engineer I: Engineering Development Program - Materials & Processes Engineering and Mechanical Disciplines (Onsite)

For more than 85 years, our team at Precision Fuzing and Sensors has designed, tested, and manufactured the fuzing and sensor systems that defense programs depend on - delivering mission-critical reliability from a single, vertically integrated facility in Middletown, Connecticut. This entry level role plays a pivotal part in our Operations Department, with primary responsibilities that include assisting in analyzing workflows, collecting data, and implementing process improvements aligned with Lean principles.

Industrial Engineer

Experience in cable and cable assembly production environment, with a specific understanding of cable, cable assemblies, connectors, materials,tooling/fixturing, including extrusion, molding, all wire and cable and cable assembly processes. Works in close collaboration with customers, VP Business Development & Technology, and Proterial factories to identify and resolve areas of risk in potential cable assembly designs and processes.

Proterial Cable America Inc

R&D Engineer - 1st Shift

The real-time control logic uses MATLAB/Simulink models to emulate the propulsion system components that are not physically present at the test or to emulate real world environment conditions for testing purposes. General Description: In support of electric drive design efforts, D489 has an Emulation Lab that manages the computer systems which are used to aid testing of components of the electric drive propulsion system.

Experienced Emulation Engineer

For more than 85 years, our team at Precision Fuzing and Sensors has designed, tested, and manufactured the fuzing and sensor systems that defense programs depend on - delivering mission-critical reliability from a single, vertically integrated facility in Middletown, Connecticut. Bachelor's degree in related Engineering field, or a combination of an Associate's Degree in related technical field with 4 to 7 years of related professional experience.3 to 5 years of experience in quality assurance or related responsibilities.

Quality Engineer II

The RPCL is seeking an investment casting Quality Process Engineer to develop and maintain our quality and inspection capabilities in support of the production of advanced commercial and military turbine engine components. Use Lean Manufacturing and Continuous Improvement tools to develop and prioritize ideas for, and lead execution of, process improvement projects to reduce process variation, increase throughput, and improve part quality.

Casting Lab Quality Process Engineer(Onsite)

Department 341 Welding & NDT Engineering Suppliers and Strategic Sourcing is looking for an additional team member to support onboarding of a new supplier. Candidate must be highly motivated, perform independently, as well as interact with other groups and organizations, including interfacing regularly with SUPSHIP or NAVSEA customers, in an engineering environment.

Program Manager Jobs in North Carolina

Senior Engineer, Electric Propulsion Systems P3 (Onsite) RTX

Manufacturing Engineer EPS Connects

Staff Site Reliability Engineer Finalsite

Project Engineer Tutor Perini

Distribution Design Engineer (Hybrid) Eversource Energy

Project Management Sr Consultant (Electrical Engineer) CBRE Group Inc

Engineer - Systems General Dynamics Corp

Quality Engineer I Kaman Corp

Turbine Generator (TG) Set Engineer Electric Boat Corp

Turbine Generator (TG) Set Engineer General Dynamics Corp

Test Engineer II Kaman Corporation

Supplier Quality Engineer Kaman Corporation

Design Engineer II, Tooling Kaman Corporation

Engineer I: Engineering Development Program - Materials & Processes Engineering and Mechanical Disciplines (Onsite) RTX Corp

Industrial Engineer Kaman Corp

R&D Engineer - 1st Shift Proterial Cable America Inc

Experienced Emulation Engineer General Dynamics Corp

Quality Engineer II Kaman Corporation

Casting Lab Quality Process Engineer(Onsite) RTX Corp

Engineer Sr- Welding General Dynamics Corp

Similar Job Searches

Stand out to leading employers.