UNKNOWN

FEED

This role will provide you the opportunity to participate in the planning, design and construction engineering of exciting and diverse water, wastewater, utilities, infrastructure, and site-development projects for our wide range of municipal and private clients with a key focus on linear infrastructure and contribute to the growth in an emerging geographic market. While this position is based in the US Northeast region, you will have the flexibility to focus on the local market and/or become engaged in major projects worldwide supporting design operations from Australia to Europe working with diverse design teams from across the globe.

GHD Group Pty Ltd

Senior Civil Engineer

linkup_via_bold

As a Propulsion Systems Engineer, you will: Lead the overall propulsion design and development necessary to support customer missions, starting from initial conceptual design from high-level customer requirements with a blank sheet of paper, all the way through development, qualification, production, and in some cases, large-scale industrialization for high-rate production. Lead and/or oversee the detailed systems and fluidic analyses for generating initial conceptual designs, selecting and baselining proper components, and working with Moog's internal and external supply bases to marry component capabilities to distilled-down system level requirements.

YEAR

Moog Inc

Staff Propulsion Systems Engineer

Coordination of internal and outsourced engineering/design resources with moderate guidance, focusing on plant layout, piping design, and associated deliverables across engineering, procurement support, fabrication, construction, and commissioning support is part of your role. Additionally, you have 8+ years of experience in plant layout and piping for industrial gas, LNG, natural gas, refining, petrochemicals, chemicals, or similar industries, including understanding of applicable codes and regulations for facility design and engineering.

Linde plc

Lead Plant Layout & Piping Engineer

Qualifying degrees: Civil Engineering, Civil Engineering Technology, Construction Engineering, Construction Engineering Technology, Construction Engineering Management, Construction Engineering Management Technology, Geological Engineering, Geotechnical Engineering, Hydraulics Engineering, Materials Engineering, Materials Science and Engineering, Metallurgical and Materials Engineering, Structural Engineering, Transportation Engineering, Transportation Planning and Engineering, or Engineering Science with a recognized concentration in any of the above listed engineering degrees. New York State Education Department (NYSED) Guidelines for Professional Engineering Practice, Guideline 1: As a licensed professional engineer, you are required to practice within your authorized scope of practice, as defined in the Education Law, Commissioners Regulations and Rules of the Board of Regents.

New York State Thruway Authority

Professional Engineer 1 (Civil/Transportation) NY HELPS Region 5 Planning

HOUR

Education and Experience Required Associate s degree and a minimum of 7 years of experience in Site Reliability Engineering, Cloud Engineering, Systems Engineering, Infrastructure Engineering, DevOps, Application Support, or related technology disciplines; OR. Works closely with application development, infrastructure, platform engineering, and business teams to enhance system resiliency through automation, observability, testing, and proactive operational management while coaching and influencing others.

Artech LLC

Lead Site Reliability Engineer

jobdiva

Additional requirements include the ability to follow written and verbal directions, read and understand technical bulletins and service manuals, work under time constraints, maintain alertness and concentration, work safely with potential electrical, chemical, radiologic, and biologic hazards using universal precautions. A Customer Support Field Engineer (CSEs) helps Revvity customers enhance the productivity of their laboratory processes and drives high levels of customer satisfaction by providing expert service and support to customers within an assigned geographic area.

Revvity, Inc.

Field Service Engineer - New York State

ea_via_bold

Analyze blueprints and perform site surveys to identify mechanical, electrical, and control systems to determine facility operational characteristics and apply building energy simulation programs to develop energy, cooling, and heating load-building models using modeling software. Participate in pre-sale activities, working closely with Sales to identify and technically qualify customer opportunities for energy efficiency and work with Siemens operations teams and outside vendors as it pertains to developing FIMs.

Siemens AG

Senior Energy Engineer

The ideal candidate brings deep experience across industrial power distribution, controls, switchgear, generators, UPS systems, electrical protection, and manufactured equipment, along with the ability to mentor engineers and solve complex cross-functional technical problems. We fabricate custom designed, purpose-built enclosures and skids for our customers and perform mechanical and electrical integration in-house, delivering a true turn-key product to our customers.

GTI Fabrication

Staff Electrical Engineer

sourcestack_via_bold

The ideal candidate brings extensive hands-on experience designing industrial equipment, generator enclosures, fabricated steel structures, equipment skids, and modular systems, along with strong engineering calculation capabilities and the ability to mentor engineers and solve complex cross-functional technical problems. We fabricate custom designed, purpose-built enclosures and skids for our customers and perform mechanical and electrical integration in-house, delivering a true turn-key product to our customers.

Staff Mechanical Engineer

The Managed Services Engineer plays a pivotal role in Netrio’s Managed Services team, serving as a senior technical expert and escalation point for complex client issues across infrastructure, networks, and systems. Acting as both a technical leader and hands-on problem solver, the Engineer manages escalations, mentors junior staff, and collaborates closely with clients and internal teams to deliver reliable, scalable, and secure solutions.

Netrio

Engineer

Bachelor's degree in Electrical Engineering, Controls Engineering, Electronics Engineering, Mechatronics, Computer Engineering, Automation Engineering, or a related discipline; equivalent relevant experience may be considered where applicable. Develop or review controls hardware and software designs, including PLCs, HMIs, robots, drives, safety systems, industrial networks, machine vision, error proofing, and plant-floor interfaces.

General Motors Co

Controls Engineer

We fabricate custom designed, purpose-built enclosures and skids for our customers and perform mechanical and electrical integration in-house, delivering a true turn-key product to our customers. The Staff Structural Engineer provides technical leadership, mentors engineering teams, and drives consistency, quality, and manufacturability across all structural deliverables.

Staff Structural Engineer

Scope of work includes managing EHS programs, leading EHS required training, ensuring chemical use/hazard/risk data is collected and interpreted for reporting, and implementing and integrating all related EHS management systems into facility processes. A minimum of 3 years environmental, health and safety experience in a manufacturing or production related environment including the following: Identifying hazards, assessing risk and provide options to eliminate or minimize the hazards/risks.

Site Environmental, Health and Safety Engineer

Hand and Finger Use/Dexterity: Uses hands to handle, control, or feel objects, tools, or controls occasionally to moderately (30-40% of the time), with manual dexterity and arm-hand steadiness for tasks like sketching, operating computers, or handling small tools; near vision required for detailed drawings or screens. Other Environmental Factors: Frequently exposed to moderate noise levels (e.g., machinery, production environments) and occasionally to contaminants or hazardous equipment (20-30% of the time); may wear protective equipment (e.g., safety glasses, hard hats, or hearing protection) when on the shop floor (30-50% of the time); works in both office and manufacturing settings with constant interaction with others.

Atlas Copco AB

Supplier Quality Engineer (Edwards Vacuum)

This position leads joint studies and torque analysis, audits torque-controlled assembly processes, manages torque tooling calibration programs, and drives continuous improvement initiatives to ensure product quality, safety, and customer satisfaction. The Quality Engineer (Torque Applications) serves as the subject matter expert for torque application, tightening strategies, joint design evaluation, and torque tool performance, working closely with Quality, Manufacturing, Product Engineering, Operations, and Suppliers.

Schneider Electric SE

Quality Engineer (Torque Applications)

The engineer will develop manufacturing instructions, CNC/N/C programming, tooling and fixture concepts, and process improvements while providing hands-on support to the machine shop. POSITION OVERVIEW As a Manufacturing Engineer your roles and responsibilities will include: The client is seeking a Manufacturing Engineer to support the production of machined parts and sub-assemblies.

Strivector

Manufacturing Engineer

After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. Position Criteria: Successfully complete and maintain compliance with Eaton's safety program and policy; This includes role-applicable portions of the EESS Qualified Electrical Worker (QEW) program and any required annual re-certifications thereafter.

Eaton is a power management company with 2016 sales of $19.7 billion. We provide energy-efficient solutions that help our customers effectively manage electrical, hydraulic and mechanical power more efficiently, safely and sustainably. Eaton is dedicated to improving the quality of life and the environment through the use of power management technologies and services. Eaton has approximately 95,000 employees and sells products to customers in more than 175 countries. For more information, visit <a href="http://www.eaton.com/Eaton/index.htm" target="_blank">Eaton.com.</a>

Eaton Corporation

Senior Power Systems Engineer

You will collaborate closely with civil, mechanical, and process teams to deliver integrated design solutions, preparing construction documents - including plans, sections, details, and specifications - and supporting quality control reviews to ensure accuracy, constructability, and alignment with project requirements. In this role, you will build technical expertise through hands‑on project delivery, working alongside experienced engineers and multidisciplinary teams while supporting the design and execution of meaningful infrastructure improvements.

Arcadis NV

Structural Engineer

This role is ideal for recent graduates or early-career engineers (0–2 years) looking to gain exposure across design, manufacturing, and field operations within a design-build environment. Support activities pertaining to the Design Phase, including submittal drawings, design coordination, and assisting with reinforcement and miscellaneous metal drawings.

Founded as Tecon Pacific in 1963, Clark Pacific started in West Sacramento on a four-acre site with 15 employees. In 1966, James Clark joined the then small firm as its general manager. With the help of many talented and dedicated engineering, plant, and field employees, the company grew rapidly during the pioneering stages of the industry in California. New forming, casting, stripping, finishing, loading, shipping, and erection techniques were being developed throughout the industry, and Tecon Pacific, under Jim Clark’s management, was at the forefront of this development on the West Coast. Today, Clark Pacific is owned and operated under equal partnership between Jim Clark’s sons, Donald Clark and Robert Clark. Like their father before them, Don and Bob are registered engineers dedicated to producing the best quality building solutions possible and pushing the limits of what prefabricated building systems can bring to today’s construction. Clark Pacific has become an industry-leading design-build manufacturer and constructor of complete building solutions and a key partner of owners, architects, engineers, and general contractors throughout California. With its industry partners, Clark Pacific continues to help shape the vibrant urban landscape of the West Coast.

Clark Pacific

Project Engineer - Relocation to Northern California Required

You will do this by collaborating with *** personnel, resolving production problems, assist in troubleshooting test failures, monitoring and resolving first pass yield (FPY) issues, servicing non-conformances, performing Material Review Board (MRB) analyses, and assisting in evaluation for possible notice of escape to customers. As an Electronics Product Engineer in our Military Aircraft Group, you will provide technical support for *** s electronics products for military aircraft programs through the production phase of the product life cycle.

Process Engineer Jobs in Buffalo, NY

Senior Civil Engineer GHD Group Pty Ltd

Staff Propulsion Systems Engineer Moog Inc

Lead Plant Layout & Piping Engineer Linde plc

Professional Engineer 1 (Civil/Transportation) NY HELPS Region 5 Planning New York State Thruway Authority

Lead Site Reliability Engineer Artech LLC

Field Service Engineer - New York State Revvity, Inc.

Senior Energy Engineer Siemens AG

Staff Electrical Engineer GTI Fabrication

Staff Mechanical Engineer GTI Fabrication

Engineer Netrio

Controls Engineer General Motors Co

Staff Structural Engineer GTI Fabrication

Site Environmental, Health and Safety Engineer Moog Inc

Supplier Quality Engineer (Edwards Vacuum) Atlas Copco AB

Quality Engineer (Torque Applications) Schneider Electric SE

Manufacturing Engineer Strivector

Senior Power Systems Engineer Eaton Corporation

Structural Engineer Arcadis NV

Project Engineer - Relocation to Northern California Required Clark Pacific

Product Engineer First Tek, Inc.

Similar Job Searches

See More Jobs

Stand out to leading employers.