Electrical Project Engineer Opal FuelsElectrical Project EngineerRancho Cucamonga, CAFull timeField responsibilities include performing walk downs at active construction, industrial, or operational sites; walking on uneven or unimproved surfaces such as gravel, dirt, concrete, steel grating, and scaffolding; climbing stairs, ladders (including vertical ladders), and scaffolding; working at heights and in confined or congested spaces; and safely wearing required personal protective equipment (PPE), which may include hard hats, safety glasses, steel toe boots, gloves, hearing protection, fall protection equipment, and respirators as dictated by site conditions. The position requires the ability to work in outdoor and industrial environments with potential exposure to varying weather conditions, noise, dust, lighting, and nearby moving equipment, while maintaining situational awareness and adherence to safety protocols.
Quality Assurance Engineer Nihon Kohden OrangeMed IncQuality Assurance EngineerSanta Ana, CA$85,000–$123,000 / yearThe QA Engineer III serves as a technical resource, leads complex quality initiatives, and drives continuous improvement efforts to support the quality, reliability, and performance of the company products. Facilitate receiving inspection, first article inspection, and calibration activities, including establishing inspection requirements for materials and defining calibration requirements for measuring equipment and test fixtures as needed.
Principal Product Quality Engineer EpirusPrincipal Product Quality EngineerTorrance, California$139,300–$160,000 / yearExperience leading cross-functional teams to solve highly visibility quality issues, drive continual improvement initiatives, and facilitate the adoption of quality requirements in the product development process. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. .
Structural Engineer (Subject Matter Expert) Tetra Tech IncStructural Engineer (Subject Matter Expert)Los Angeles, CA$145,000–$195,000 / yearWith 30,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science to address the entire water cycle, protect and restore the environment, design sustainable and resilient infrastructure, and support the clean energy transition. Please note that Tetra Tech considers various factors in determining pay, including but not limited to: education, relevant and demonstrated work experience in the role, skills, geographic location, qualifications, certifications, and other competencies relevant to the needs of the business.
Conveyance Project Engineer Tetra Tech IncConveyance Project EngineerIrvine, CA$95,000–$130,000 / yearWith 30,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science to address the entire water cycle, protect and restore the environment, design sustainable and resilient infrastructure, and support the clean energy transition. Be part of our team that specializes in the engineering of public water systems to upgrade aging infrastructure, provide sustainable solutions, and offer innovative approaches to help preserve safe and reliable water delivery for Colorado and the Southwest region.
Transmission Line Engineer (Remote) Tetra Tech IncTransmission Line Engineer (Remote)Los Angeles, CARemote$75,000–$150,000 / yearWith 30,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science to address the entire water cycle, protect and restore the environment, design sustainable and resilient infrastructure, and support the clean energy transition. Please note that Tetra Tech considers various factors in determining pay, including but not limited to: education, relevant and demonstrated work experience in the role, skills, geographic location, qualifications, certifications, and other competencies relevant to the needs of the business.
Senior Structural Engineer (Remote) Tetra Tech IncSenior Structural Engineer (Remote)Pasadena, CARemote$140,000–$190,000 / yearWith 30,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science to address the entire water cycle, protect and restore the environment, design sustainable and resilient infrastructure, and support the clean energy transition. Please note that Tetra Tech considers various factors in determining pay, including but not limited to: education, relevant and demonstrated work experience in the role, skills, geographic location, qualifications, certifications, and other competencies relevant to the needs of the business.
Senior Transmission Line Engineer (Remote) Tetra Tech IncSenior Transmission Line Engineer (Remote)Los Angeles, CARemote$150,000–$200,000 / yearWith 30,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science to address the entire water cycle, protect and restore the environment, design sustainable and resilient infrastructure, and support the clean energy transition. Please note that Tetra Tech considers various factors in determining pay, including but not limited to: education, relevant and demonstrated work experience in the role, skills, geographic location, qualifications, certifications, and other competencies relevant to the needs of the business.
Senior Electrical Engineer - Los Angeles, CA Tetra Tech IncSenior Electrical Engineer - Los Angeles, CALos Angeles, CA$150,000–$200,000 / yearOur 25,000 employees work together to provide clear solutions to complex problems by Leading with Science to address the entire water cycle, protect and restore the environment, design sustainable and resilient infrastructure, and support the clean energy transition. Position Summary: As a Senior Electrical Engineer, you will take on a key leadership role, guiding the electrical discipline within the office while mentoring a high-performing engineering team.
Mechanical Engineer Tetra Tech IncMechanical EngineerLos Angeles, CA$110,000–$130,000 / yearOur 25,000 employees work together to provide clear solutions to complex problems by Leading with Science to address the entire water cycle, protect and restore the environment, design sustainable and resilient infrastructure, and support the clean energy transition. About Tetra Tech: Tetra Tech is the leader in water, environment, and sustainable infrastructure, providing high-end consulting and engineering services for projects worldwide.
Municipal Project Manager/Senior Civil Engineer Tetra Tech IncMunicipal Project Manager/Senior Civil EngineerIrvine, CARemote$145,000–$170,000 / yearLead, perform, and manage projects that include water and wastewater treatment, distribution and transmission mains, wastewater collection, trunk and force main, pumping stations, wells, storage tanks, civil grading, drainage, as well as rehabilitation of existing infrastructure. It is a client-facing position that supports a wide range of municipal work-including treatment facilities, storage, collection and conveyance systems, pump stations, drainage systems, and other water-related projects-helping strengthen a competitive municipal practice.
Electrical Engineer - Los Angeles, CA Tetra Tech IncElectrical Engineer - Los Angeles, CALos Angeles, CA$130,000–$180,000 / yearPosition Summary: As an Electrical Engineer at Glumac, you will lead and support the design of electrical power and control systems for complex projects including hospitals, laboratories, educational facilities, light rail, high-rise offices, and other commercial and institutional buildings. Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions: Design and plan electrical power systems for all types of projects, including but not limited to: commercial, advanced technology, mission critical, education, government, healthcare, science & technology.
Senior, Full Stack Engineer - Tax Transformation DeloitteSenior, Full Stack Engineer - Tax TransformationCosta Mesa, CAFull timeThe wage range for this role takes into account the wide range of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational needs. NET Core, ASP.NET Core Web API, SQL, NoSQL, Entity Framework 6 or above, Azure, Database performance tuning, Applying Design Patterns, Agile.
Senior Design Engineer Semiconductor Machinery Hardware Freeform Future CorpSenior Design Engineer Semiconductor Machinery HardwareLos Angeles, CA$150,000–$200,000 / yearYou will own complex design challenges end-to-end, working hands-on with some of the most precise and demanding hardware in the industry, and serve as a technical authority on where Freeform''s platform unlocks performance regimes, architectures, and geometries that were previously impractical or impossible. The ideal candidate is a highly experienced mechanical engineer with deep intuition for part design, an intimate understanding of semiconductor fabrication machinery and equipment, and a track record of leading technical work on complex hardware programs.
Principal Component Engineer I CesiumAstroPrincipal Component Engineer IEl Segundo, CA$148,500–$199,000 / yearPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. If you enjoy working in a startup environment and are passionate about developing leading-edge electronics for satellites, spacecraft, and aerospace systems, we would like to hear from you.
Spike Inlet Mechanisms Build Engineer HermeusSpike Inlet Mechanisms Build EngineerLos Angeles, CA$91,800–$187,450 / yearThe engineer will work closely with design engineers, technicians, manufacturing teams, and test engineers to develop hardware, improve build processes, and support delivering rapid hardware iterations in a fast-paced development environment. Lead the build, test, and integration of complex aerospace mechanisms including the spike inlet mechanism, flow control door mechanisms, and associated hydraulic actuators, valves, linkages, and structural assemblies.
Manufacturing Engineer, Structures VastManufacturing Engineer, StructuresLong Beach, California$86,100–$122,220 / yearVast is developing next-generation space stations to ensure a continuous human presence in space for America and its allies, enabling advanced microgravity research and manufacturing, and unlocking a new space economy for government, corporate, and private customers. Vast has multiple Structures Manufacturing Engineer openings, reporting to the Manager of Structures Fabrication, to support the development of the systems that will be required for the design and build of artificial-gravity human-rated space stations.
Senior Manufacturing Engineer, ECLSS VastSenior Manufacturing Engineer, ECLSSLong Beach, California$112,340–$159,468 / yearVast is developing next-generation space stations to ensure a continuous human presence in space for America and its allies, enabling advanced microgravity research and manufacturing, and unlocking a new space economy for government, corporate, and private customers. Knowledge of metallic and fluid system manufacturing techniques, processes, equipment, and special processes, including machining, welding, brazing, tube bending, cleaning, passivation, leak testing, proof testing, and pressure testing.
Thermal Fluids Design Reliability Engineer VastThermal Fluids Design Reliability EngineerLong Beach, California$162,360–$265,392 / yearVast is developing next-generation space stations to ensure a continuous human presence in space for America and its allies, enabling advanced microgravity research and manufacturing, and unlocking a new space economy for government, corporate, and private customers. As a Thermal Fluids Design Reliability Engineer, you will ensure thermal fluids systems on Haven-1 are appropriately designed and function reliably, without failure, over their intended lifespan by integrating reliability principles directly into the design process.
Supplier Quality Engineer VastSupplier Quality EngineerLong Beach, California$100,000–$130,380 / yearVast is developing next-generation space stations to ensure a continuous human presence in space for America and its allies, enabling advanced microgravity research and manufacturing, and unlocking a new space economy for government, corporate, and private customers. We also take pride in offering exceptional food perks, with snacks, drip coffee & onsite barista, cold drinks, and dinner meals remaining free of charge, and lunch subsidized as part of Vast’s ongoing commitment to providing high-quality meals for employees.
Avionics Design Reliability Engineer VastAvionics Design Reliability EngineerLong Beach, California$162,360–$265,392 / yearVast is developing next-generation space stations to ensure a continuous human presence in space for America and its allies, enabling advanced microgravity research and manufacturing, and unlocking a new space economy for government, corporate, and private customers. We also take pride in offering exceptional food perks, with snacks, drip coffee & onsite barista, cold drinks, and dinner meals remaining free of charge, and lunch subsidized as part of Vast’s ongoing commitment to providing high-quality meals for employees.
Avionics Manufacturing Engineer VastAvionics Manufacturing EngineerLong Beach, California$140,000–$205,000 / yearVast is developing next-generation space stations to ensure a continuous human presence in space for America and its allies, enabling advanced microgravity research and manufacturing, and unlocking a new space economy for government, corporate, and private customers. As an Avionics Manufacturing Engineer, you will play a unique and crucial role in the development and manufacturing of avionics assemblies and components for our portfolio of space products, ranging from flight computers and life-support systems, to navigational and communications equipment.
Additive Engineer Impulse SpaceAdditive EngineerRedondo Beach, CA$100,000–$160,000 / yearTo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Drive and identify projects to make the printer platforms more robust and repeatable based on machine issues, failed builds, and sensor monitoring/in process data acquisition.
Structures Design Reliability Engineer VastStructures Design Reliability EngineerLong Beach, California$162,360–$265,392 / yearVast is developing next-generation space stations to ensure a continuous human presence in space for America and its allies, enabling advanced microgravity research and manufacturing, and unlocking a new space economy for government, corporate, and private customers. We also take pride in offering exceptional food perks, with snacks, drip coffee & onsite barista, cold drinks, and dinner meals remaining free of charge, and lunch subsidized as part of Vast’s ongoing commitment to providing high-quality meals for employees.
Propulsion Design Reliability Engineer VastPropulsion Design Reliability EngineerLong Beach, California$162,360–$265,392 / yearVast is developing next-generation space stations to ensure a continuous human presence in space for America and its allies, enabling advanced microgravity research and manufacturing, and unlocking a new space economy for government, corporate, and private customers. We also take pride in offering exceptional food perks, with snacks, drip coffee & onsite barista, cold drinks, and dinner meals remaining free of charge, and lunch subsidized as part of Vast’s ongoing commitment to providing high-quality meals for employees.
Pipeline / Instrumentation & Controls Principal Engineer E2 Consulting Engineers, Inc.Pipeline / Instrumentation & Controls Principal EngineerLos Angeles, California$140,000–$180,000 / yearFull timeAbout the Organization: E2 Consulting Engineers, LP (E2) is a professional services firm established in 1988 specializing in a full spectrum of engineering services including, project engineering and design, federal base operations and infrastructure support services, gas pipeline construction and inspection services, environmental consulting and remediation, and information technology services. Prepare designs involving pressure, flow, and temperature transmitters; gas detection equipment; remote control valves; control valves; flow meters; pressure regulators; programmable logic controllers; remote terminal units; control panels; and communications equipment.
Materials Engineer Materials Laboratory Space Exploration Technologies CorpMaterials Engineer Materials LaboratoryHawthorne, CA$100,000–$117,500 / yearRESPONSIBILITIES: Own data quality and integrity across the Materials Lab, including Thermal Analysis (TGA, LFA, DSC, DMA, STA, etc.), Characterization (SEM, EDS, XRD, optical microscopy, FTIR, etc.), Chemistry (ICP, spark OES, PSD, pycnometer testing, etc.), Reliability (corrosion, coatings, etc.), Mechanical Testing (cryo, room temperature, and elevated temperature tensile/compression/fatigue, Charpy, fracture toughness, etc.), and R&D (torch testing, heat treatments, Gleeble, and process development, etc.). You will establish engineering controls and quality systems, train lab personnel on first principles, investigate data anomalies, and drive capability expansion across Thermal, Characterization, Chemistry, Reliability, Mechanical Testing, and R&D segments.
Launch Vehicle Systems Engineer The Aerospace CorpLaunch Vehicle Systems EngineerLos Angeles AFB, CA$117,300–$226,900 / yearThe position will provide technical leadership and apply launch vehicle systems engineering expertise to ensure the launch system meets USSF requirements, and assist in ensuring the effective execution of the Aerospace launch verification processes through a range of activities including Design Certification Reviews (DCR), Chief Engineer's Review Boards (ChERB), non-recurring design validation (NRDV) assessments, and launch vehicle flight readiness verification through completion of tasks in the Launch Verification Matrix (LVM). DSG is unique at Aerospace as it not only directly supports major customers, including the U.S. Space Force, U.S. Space Command, Air Force Material Command, and senior leadership at the Pentagon, but also provides a broad range of technical support across the national space enterprise, maintaining vertical responsibilities with customers' portfolios as well as horizontal, matrixed responsibilities across the corporation.
Lead Project Engineer - Hydraulics Eaton Corporation PlcLead Project Engineer - HydraulicsLos Angeles, CA$112,000–$164,000 / yearPosition Overview: The Lead Project Engineer - New Product Development will have the opportunity to work with experts across Eaton Aerospace in functions such as Designers, Engineers, Fabrication, Supply Chain, Test Lab and one or more Integrated Product Teams (IPT) for applications, design, analyze, process development, manufacturing and implement product designs and improvements in all phases of a product development lifecycle. Minimum five (5) years of Mechanical and Project Engineering including design experience utilizing 3D CAD software in the Hydraulic aerospace/ automotive/vehicle industry environment OR Master''s degree from an accredited institution and a minimum of two (2) years of experience in the Hydraulic aerospace /automotive/ vehicle industry.
Software Engineer, Generalist ANDURIL INDUSTRIESSoftware Engineer, GeneralistIrvine, CA$166,000–$220,000 / yearData Systems Expertise: Demonstrated success in designing, implementing, and managing various data storage solutions (e.g., relational databases, NoSQL databases) and building efficient data processing pipelines. Driven by Real-World Impact: A proactive drive and enthusiasm for developing mission-critical back-end software that demonstrably supports vital operations and makes a significant real-world difference.
Senior Reliability Engineer ANDURIL INDUSTRIESSenior Reliability EngineerCosta Mesa, CA$166,000–$220,000 / yearYour scope will span performing predictive reliability analysis and FMEAs, developing and executing qualification and production test plans, leading root-cause failure investigations from both the factory floor and the field, and closing the loop to drive continuous design and process improvements. Develop and execute comprehensive Qualification and Validation Test plans (including environmental, life/limit, and accelerated testing) to ensure appropriate requirements coverage and de-risking for production readiness; partner with Test Engineering to fixture and instrument test campaigns.
Senior Software Engineer, Generalist ANDURIL INDUSTRIESSenior Software Engineer, GeneralistIrvine, CA$191,000–$253,000 / yearData Systems Expertise: Demonstrated success in designing, implementing, and managing various data storage solutions (e.g., relational databases, NoSQL databases) and building efficient data processing pipelines. Driven by Real-World Impact: A proactive drive and enthusiasm for developing mission-critical back-end software that demonstrably supports vital operations and makes a significant real-world difference.
Senior Manufacturing Engineer, Space Systems ANDURIL INDUSTRIESSenior Manufacturing Engineer, Space SystemsCosta Mesa, CA$146,000–$194,000 / yearCollaborate across engineering disciplines (systems, electrical, mechanical, optical, test, quality) and communicate effectively with program management, supply chain, and executive leadership on manufacturing status, risks, and mitigation strategies. Analyze production data and lead scaling efforts from low-rate to high-rate production, implementing continuous improvement programs (Lean, Six Sigma) to optimize throughput, reduce cycle times, and enhance product reliability while reducing costs.
Senior Supplier Manufacturing Engineer, Electrical ANDURIL INDUSTRIESSenior Supplier Manufacturing Engineer, ElectricalCosta Mesa, CA$146,000–$194,000 / yearThe Senior Supplier Manufacturing Engineer, Electrical (internally known at Anduril as Senior Supplier Industrialization Engineer, Electrical) is a high-profile, cross functional position that plays an integral role in enabling development and production flow of Anduril's critical supply base. Support Supply Chain Product Sourcing Engineers (PSE), Supply Chain Global Strategic Sourcing Management (GSS) and Supplier Quality Engineers (SQE) in ensuring Suppliers' understanding and adherence to the criteria for part quality set by SQE.
Staff Manufacturing Engineer, Space Systems ANDURIL INDUSTRIESStaff Manufacturing Engineer, Space SystemsCosta Mesa, CA$166,000–$220,000 / yearCollaborate across engineering disciplines (systems, electrical, mechanical, optical, test, quality) and communicate effectively with program management, supply chain, and executive leadership on manufacturing status, risks, and mitigation strategies. Analyze production data and lead scaling efforts from low-rate to high-rate production, implementing continuous improvement programs (Lean, Six Sigma) to optimize throughput, reduce cycle times, and enhance product reliability while reducing costs.
Senior Software Engineer, Quality Integration ANDURIL INDUSTRIESSenior Software Engineer, Quality IntegrationCosta Mesa, CA$146,000–$194,000 / yearMaintain and improve our integration of performance testing into CI/CD pipelines, establishing and enforcing performance baselines and championing reliability engineering best practices to proactively identify and prevent regressions across the entire software stack. DevOps practices, CI/CD pipeline development (e.g., Jenkins, GitLab CI, GitHub Actions), SRE principles, automated testing frameworks, scripting for automation, understanding of software development lifecycles.
Technical Operations Engineer Trainer ANDURIL INDUSTRIESTechnical Operations Engineer TrainerCosta Mesa, CA$132,000–$198,000 / yearThis third-party service provider provides risk-intelligence services that may include analysis of sanctions and watchlists, adverse media, public-record information, and other lawful open-source or commercial data sources. To ensure your safety and help you navigate your job search with confidence, please keep the following critical points in mind: No Financial Requests: Anduril will never solicit payment or demand personal financial details (such as banking information, credit card numbers, or social security numbers) at any stage of our hiring process.
Reliability Engineer ANDURIL INDUSTRIESReliability EngineerCosta Mesa, CA$146,000–$194,000 / yearYour scope will span performing predictive reliability analysis and FMEAs, developing and executing qualification and production test plans, leading root-cause failure investigations from both the factory floor and the field, and closing the loop to drive continuous design and process improvements. Develop and execute comprehensive Qualification and Validation Test plans (including environmental, life/limit, and accelerated testing) to ensure appropriate requirements coverage and de-risking for production readiness; partner with Test Engineering to fixture and instrument test campaigns.
Senior Signal Processing Engineer, Space ANDURIL INDUSTRIESSenior Signal Processing Engineer, SpaceFoothill Ranch, CA$166,000–$220,000 / yearWe're developing fully integrated hardware and software systems, including Lattice for Space Missions and modular payloads, to address growing threats in space and ensure our Guardians maintain a decisive advantage in this contested war-fighting domain. This third-party service provider provides risk-intelligence services that may include analysis of sanctions and watchlists, adverse media, public-record information, and other lawful open-source or commercial data sources.
Programs Chief Engineer, Dive XL ANDURIL INDUSTRIESPrograms Chief Engineer, Dive XLCosta Mesa, CA$254,000–$336,000 / yearTo ensure your safety and help you navigate your job search with confidence, please keep the following critical points in mind: No Financial Requests: Anduril will never solicit payment or demand personal financial details (such as banking information, credit card numbers, or social security numbers) at any stage of our hiring process. Architectural Design Authority: Serve as the ultimate technical authority for the system architecture, design decisions, and critical trade-offs across all engineering disciplines (mechanical, electrical, software, autonomy, acoustics, materials).
Senior Test Engineer Assa Abloy ABSenior Test EngineerCypress, CA$110,000–$118,000 / yearFrom cutting-edge readers, credentials and controllers, to mobile and biometric technologies, HID PACS empowers organizations worldwide to protect their people, property and assets with scalable, high-quality solutions. The wage range for this role considers a broad scope of factors that are considered when making compensation decisions, including but not limited to: skill sets, experience and training, licensure and certifications, and other business and organizational needs.
Operations Engineer Material Flow Space Exploration Technologies CorpOperations Engineer Material FlowHawthorne, CA$100,000–$115,000 / yearDevelop and lead training for new processes and equipment, Project Collaboration: Collaborate with Engineering, Production and Supply Chain teams across SpaceX on critical projects to ensure stakeholder buy-in is achieved and everyone is working towards a common target state. SpaceX is currently seeking an experienced Operations Engineer (Material Flow) to analyze, design, and optimize the receiving, storage, movement, and presentation of materials for all flight and non-flight programs to enable overall Starship objectives.
Manufacturing Engineer, Raptor Turbomachinery Space Exploration Technologies CorpManufacturing Engineer, Raptor TurbomachineryHawthorne, CA$100,000–$115,000 / yearAs the Manufacturing Engineer for Raptor production at SpaceX, you will have the opportunity to utilize your knowledge, experience, and creativity to develop, implement and optimize the production process for key sub-assemblies and components for the Raptor engine. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.
Sr. Propulsion Engineer Raptor Flight Space Exploration Technologies CorpSr. Propulsion Engineer Raptor FlightHawthorne, CA$135,000–$215,000 / yearSoftware, Ground Systems, Stage Propulsion, Integration and Test, Guidance and Control) to achieve successful and reliable engine performance in flight and during ground vehicle testing, and to continuously refine the designs and practices for increased product reliability and reduced costs. Enable high launch cadence with unparalleled reliability through automated analysis of test and flight data; expand existing capabilities and develop new algorithms to improve reliability and thoroughness of all flight processes.
Quality Engineer KBR IncQuality EngineerSanta Ana, CA$108,000–$211,000 / yearExperience with harness work on NASA projects and be able to pass NASA Workmanship classes and prove expertise executing NASA Workmanship requirements. The offered rate will be based on contract affordability and the selected candidate's working location, knowledge, skills, and/or experience and in consideration of internal parity.
Manufacturing Automation Engineer, Chamber and Nozzle Raptor Space Exploration Technologies CorpManufacturing Automation Engineer, Chamber and Nozzle RaptorHawthorne, CA$100,000–$115,000 / yearPartner closely with propulsion design, materials, production, and supply chain teams to convert new designs into robust, scalable processes, resolve nonconformances, and drive design changes that improve manufacturability, reliability, and performance. These components feature some of the most complex geometries in rocket propulsion - including intricate regenerative cooling channels, thin-walled high-temperature alloys, and tight-tolerance surfaces that must survive extreme thermal and pressure cycles across hundreds of reuse cycles.
Propulsion Engineer Raptor Flight Space Exploration Technologies CorpPropulsion Engineer Raptor FlightHawthorne, CA$100,000–$130,000 / yearCollaborate with engineers and technicians from most engineering disciplines, including stage propulsion, structure, launch, testing, production, ground, software, avionics, guidance and control, mission management, flight reliability, etc. to achieve successful and reliable engine performance in flight and during ground testing, and to continuously refine the designs and practices for increased reliability and reduced costs. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Manufacturing Engineer, Chamber and Nozzle Raptor Space Exploration Technologies CorpManufacturing Engineer, Chamber and Nozzle RaptorHawthorne, CA$100,000–$115,000 / yearThese components feature some of the most complex geometries in rocket propulsion - including intricate regenerative cooling channels, thin-walled high-temperature alloys, and tight-tolerance surfaces that must survive extreme thermal and pressure cycles across hundreds of reuse cycles. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Welding Automation Engineer, Chamber and Nozzle Raptor Space Exploration Technologies CorpWelding Automation Engineer, Chamber and Nozzle RaptorHawthorne, CA$100,000–$115,000 / yearPartner closely with propulsion design, materials, production, and supply chain teams to convert new designs into robust, scalable processes, resolve nonconformances, and drive design changes that improve manufacturability, reliability, and performance. These components feature some of the most complex geometries in rocket propulsion - including intricate regenerative cooling channels, thin-walled high-temperature alloys, and tight-tolerance surfaces that must survive extreme thermal and pressure cycles across hundreds of reuse cycles.
Propulsion Engineer, Chamber and Nozzle Manufacturing Raptor Space Exploration Technologies CorpPropulsion Engineer, Chamber and Nozzle Manufacturing RaptorHawthorne, CA$100,000–$115,000 / yearThese components feature some of the most complex geometries in rocket propulsion - including intricate regenerative cooling channels, thin-walled high-temperature alloys, and tight-tolerance surfaces that must survive extreme thermal and pressure cycles across hundreds of reuse cycles. Partner closely with propulsion design, materials, production, and supply chain teams to convert new designs into robust, scalable processes, resolve nonconformances, and drive design changes that improve manufacturability, reliability, and performance.