Electronics Repair Manufacturing Engineer / Test Systems Int Aquinas ConsultingElectronics Repair Manufacturing Engineer / Test Systems IntBloomfield, CTDemonstrated experience designing, building, and commissioning electronic test equipment, along with expert-level troubleshooting of PCBAs, power electronics, VFDs, motor controls, and industrial electronic systems. Electronics Repair Manufacturing Engineer job Responsibilities: Design, build, commission, and validate electronic test equipment, repair fixtures, and functional, diagnostic, and end-of-line test systems for industrial electronic assemblies.
Senior Braiding/ Process Engineer Smiths Group PlcSenior Braiding/ Process EngineerSpringfield, MAPrimary markets include aerospace, chemical, petro-chemical, pulp and paper, petroleum equipment, heavy equipment, compressed gas, automotive, refrigeration, transportation, data centers, and dozens of other niche markets. The Senior Braiding / Process Engineer is a hands-on technical leader responsible for developing, optimizing, and supporting braiding and spiral reinforcement processes for high-performance hose and flexible conduit systems.
Principal Composites Engineer (Onsite) RTXPrincipal Composites Engineer (Onsite)East Hartford, ConnecticutIn this role, you will support CIMA (Composites, Impact, Manufacturing and Analysis) with technology, design development, definition, production, and aftermarket phases for composite fan components on a mix of operational military engines and advanced engine development programs. Functioning as a design/structures engineer for composite components and working on an Integrated Product Team (IPT) and participating in projects aimed at crafting and implementing designs that meet advanced engine-specific requirements.
Senior Engineer: Thermal Management (Onsite) RTXSenior Engineer: Thermal Management (Onsite)East Hartford, ConnecticutThe successful candidate will support the Advanced Concepts group in the discovery, optimization, and analysis of new commercial and military engine concepts, Invent, size, optimize and analyze thermal management systems to support novel thermodynamic cycles and engine concepts, This position will provide the successful candidate with the flexibility to work across commercial and military organizations and make novel discoveries to meet the challenges of the 21st century. Not Required At RTX, the world largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world’s most complex problems.
Casting Lab Quality Process Engineer(Onsite) RTXCasting Lab Quality Process Engineer(Onsite)East Hartford, ConnecticutThe RPCL is seeking an investment casting Quality Process Engineer to develop and maintain our quality and inspection capabilities in support of the production of advanced commercial and military turbine engine components. Use Lean Manufacturing and Continuous Improvement tools to develop and prioritize ideas for, and lead execution of, process improvement projects to reduce process variation, increase throughput, and improve part quality.
Sr Engineer, Design Engineering (Onsite) RTXSr Engineer, Design Engineering (Onsite)East Hartford, ConnecticutThe role will provide an opportunity take on a design lead role for Rotors, and work within the team and IPT to drive improvements in design, address technical issues, support production ramp, and engage with multiple disciplines in support of the aforementioned. Support Production and devl Quality Notifications including, creating PPT packages, executing non-conformance analysis, working with required disciplines to determine acceptability, disposition, documentation, and QN closure.
Senior Power Electronic Engineer LiquidPistonSenior Power Electronic EngineerSuffield, CTFull timeThe right candidate is excited by the broader challenge of building reliable, high-performance products in a small-company environment where priorities evolve quickly and engineers wear multiple hats. Address real-world hardware challenges including EMI/EMC issues, component failures, manufacturability concerns, and reliability improvements.
Associate Manufacturing Engineer UFP Technologies IncAssociate Manufacturing EngineerChicopee, MAThe Company's single-use and single-patient devices and components are used in a wide range of medical devices and packaging for minimally invasive surgery, infection prevention, wound care, wearables, orthopedic soft goods, and orthopedic implants. Associate Manufacturing Engineer Summary: The Associate Manufacturing Engineer applies knowledge of continuous improvement to enhance manufacturing quality, reliability, and cost-effectiveness, while assisting the Manufacturing Engineering team.
Principal Advanced Manufacturing Research Engineer RTXPrincipal Advanced Manufacturing Research EngineerEast Hartford, ConnecticutThe candidate will join the Advanced Manufacturing Team which specializes in the development, testing, optimization, and demonstration of novel manufacturing technologies for internal deployment as well as for external research programs across a variety of technical areas including additive manufacturing, robotic automation, machining, joining, welding, repair, surface treatment, sensing, amongst many others. The individual will work with the team in a fast-paced, R&D environment alongside leading scientists and colleagues from across RTRC and the greater RTX organization (including Collins Aerospace, Pratt & Whitney, and Raytheon) to conceive, develop, and demonstrate next generation technologies for Aerospace and Defense applications.
Application Engineer Chart Industries IncApplication EngineerWindsor, CTThis position supports the external and intercompany customer needs in the market by supporting independent sales representatives, regional sales managers, key accounts, and end customers. Howden, a Chart Industries Company is a global engineering business who focuses on providing clients with industrial products that help multiple sectors improve their everyday processes.
Transportation Engineer Trainee (Construction Engineering) State of ConnecticutTransportation Engineer Trainee (Construction Engineering)Hartford, CT$67,202–$91,488 / yearNOTE: The following additional substitutions are allowed for the Target Class of Transportation Engineer 1 (Construction Engineering): Possession of Land Surveyor (LS) licensure from the Department of Consumer Protection State Board of Examiners for Professional Engineers and Land Surveyors consistent with C.G.S. §20-302 may be substituted for the General Experience requirement. Possession of at least Level III certification, from the National Institute for Certification in Engineering Technologies (NICET), in one of the following Civil Engineering Technology Programs may be substituted for the General Experience requirement: Transportation Construction Inspection Program - Highway Construction Inspection.
Program Quality Engineer, Quality Assurance – GTF (Onsite) RTXProgram Quality Engineer, Quality Assurance – GTF (Onsite)East Hartford, ConnecticutNot Required At RTX, the world largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world’s most complex problems. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
Software Engineer - P2 (Onsite) RTXSoftware Engineer - P2 (Onsite)East Hartford, ConnecticutCDS develops complex, cyber-resilient control systems and software for commercial and military engines including power and thermal management Systems and auxiliary power units. CDS is responsible for all aspects of Pratt & Whitney engine control and diagnostic system development including requirements analysis & definition, system & software architecture, algorithm design and product software design, verification & validation.
NewCertification Specialist - Principal Engineer (Onsite) RTXCertification Specialist - Principal Engineer (Onsite)East Hartford, ConnecticutPSCV and Engineering Quality ensures flight safety and compliance by validating and certifying products, engineering processes, and services that meet regulatory, engineering, and customer requirements to safeguard our employees, customers, and the flying public. Collaborate with existing certification specialists, ODA Unit Members, CIPTs, other systems disciplines and technical specialists to support development of substantiation plans and reports for initial engine model certification activity and post certification design changes.
Electric Grid Planning Analyst ISO New England IncElectric Grid Planning AnalystWindsor, CT$86,000–$115,000 / yearThis role supports the implementation and refinement of methodologies used to assess resource contributions to system adequacy and reliability and represents the organization in regional and national forums by providing analytical support for studies, committees, and regulatory discussions. Provide technical and procedural leadership by coordinating and facilitating work within the ISO and across a wide range of stakeholders, including Market Participants, NEPOOL and ISO committees, and regional and national regulatory entities.
Senior Mechanical Engineer - Building Systems Fuss & O'NeillSenior Mechanical Engineer - Building SystemsHartford, CTRemote$120,000–$140,000 / yearThe ideal candidate is a seasoned mechanical engineer with strong technical expertise in HVAC, plumbing, and fire protection systems, a passion for mentoring junior staff, and the ability to manage projects from concept through construction. We are seeking a Senior Mechanical Engineer to join our growing building systems team and play a key role in the planning, design, and delivery of complex mechanical systems for a diverse portfolio of projects.
Senior Project Manager - Construction Loureiro Engineering Associates, Inc.Senior Project Manager - ConstructionPlainville, CTFull timeThis position provides leadership to project teams, mentors junior Project Managers, Project Engineers, and Field Engineers, and partners with executive leadership to strengthen company systems, procedures, and staff development in support of continued company growth. Loureiro Engineering Associates, Inc. (Loureiro) is an employee-owned (ESOP), full-service multi-disciplinary consulting firm with operations in Connecticut, Massachusetts, Rhode Island, New Hampshire, North Carolina, and Missouri.
Electrical Engineer V ZobilityElectrical Engineer VBloomfield, CTThis individual will serve as the technical lead responsible for designing, building, validating, and deploying new test systems; optimizing repair workflows; and improving overall costs and lead times for this core function. Responsibilities: Responsibilities include designing and commissioning new test equipment, validating repair processes, optimizing workflow, leading equipment migration activities, and increasing repair throughput.
NewDevOps Engineer inSync StaffingDevOps EngineerHartford, CTRate of pay within the stated range will depend on the qualification of the applicant. Flexible spending accounts.
Transportation Design Engineer - Project Manager Fuss & O'NeillTransportation Design Engineer - Project ManagerHartford, CTRemote$125,000–$155,000 / yearIn this role, you’ll serve as both a technical expert and project leader, guiding multidisciplinary teams, partnering with clients, and mentoring emerging talent—all while delivering high-quality transportation solutions. We are seeking a Transportation Design Engineer – Project Manager to lead the planning, design, and delivery of complex roadway and highway projects in Connecticut.
Entry Level Wastewater Engineer Fuss & O'NeillEntry Level Wastewater EngineerHartford, Connecticut$75,000–$100,000 / yearOver six months, you'll build professional development, business acumen, and project delivery skills through real case studies, simulations, and role-play — not passive lectures — culminating in an in-person capstone event where you'll present your work and map out your goals for the year ahead. This isn't a "watch and wait" entry-level role: you'll be working directly on design, analysis, permitting, and construction support from day one, learning from engineers who actually want to teach you something.
Network Engineer Associate - DHA Ne&S ASRC Federal Holding CompanyNetwork Engineer Associate - DHA Ne&Shampden, MAUses diagnostic utilities to identify and isolate problems encountered on different mediums and network protocols, gather latency statistics and find specific network bottlenecks, evaluate problems and implement fix actions through device reconfiguration or replacement depending on the circumstances. Possess experience in routed, switched and shared LAN environments that operate such items as current supported versions of Microsoft OS, Windows Active Directory, UNIX and OpenVMS and employ routers, switches, and terminal servers as well as various local and long-haul WAN connectivity.
Junior Network Engineer ASRC Federal Holding CompanyJunior Network Engineerhampden, MAUses diagnostic utilities to identify and isolate problems encountered on different mediums and network protocols, gather latency statistics and find specific network bottlenecks, evaluate problems and implement fix actions through device reconfiguration or replacement depending on the circumstances. Possess experience in routed, switched and shared LAN environments that operate such items as current supported versions of Microsoft OS, Windows Active Directory, UNIX and OpenVMS and employ routers, switches, and terminal servers as well as various local and long-haul WAN connectivity.
Senior HV Project Manager (Remote) SOLV Energy LLCSenior HV Project Manager (Remote)CTRemote$144,790–$180,990 / yearIn addition, candidate introductions or resumes can only be submitted to our internal talent acquisition recruiting team if a signed vendor agreement is already on file and the third-party recruiter or agency has received formal instructions from our internal talent acquisition team to submit candidates for a particular job posting. Licensed Professional Engineer, PMP certification, or directly relevant industry experience preferred NFPA 70e "Qualified Person" preferred, skilled with knowledge related to the construction and operation of the electrical equipment and installation and has received safety training on the hazards involved.
Process Engineer - Willimantic Prysmian SpAProcess Engineer - WillimanticWillimantic, CTWith Diversity, Equity, and Inclusion (DE&I) as part of our Social Ambition 2030 and a strategic pillar of our Company culture, Prysmian is committed to the development of an organization that prioritizes talent, where people feel respected, included, and free to fully express their potential just as they are. Prysmian Group strongly believes that diversity drives meritocracy and brings significant value at all levels of the organization, increases the possibility of capturing market opportunities and maximizing value for our customers and shareholders.
Full Stack AI Platform Engineer – AI Accelerator RTXFull Stack AI Platform Engineer – AI AcceleratorEast Hartford, ConnecticutNot Required At RTX, the world's largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world’s most complex problems. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.
Core Structures Lifing, Senior Engineer (Onsite) RTXCore Structures Lifing, Senior Engineer (Onsite)East Hartford, ConnecticutNot Required At RTX, the world's largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world’s most complex problems. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
AI/ML Software Engineer P2 (Onsite) RTXAI/ML Software Engineer P2 (Onsite)East Hartford, ConnecticutHot Section Engineering is responsible for the design, development, technology maturation and in service support of all diffuser cases, combustors, turbines (vanes, blades, rotors and cases), augmenters (military), nozzles and associated fuel systems for all military, commercial and industrial engine models and radial auxiliary power units. Knowledge of state-of-the-art architecture, machine learning techniques, and algorithms with experience developing or using major deep learning frameworks (e.g., PyTorch, Tensorflow, JAX).
Principal Cybersecurity Software Engineer P4 (Onsite) RTXPrincipal Cybersecurity Software Engineer P4 (Onsite)East Hartford, ConnecticutActive and existing security clearance required after day 1 At RTX, the world largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world’s most complex problems. CDS is responsible for all aspects of Pratt & Whitney engine control and diagnostic system development including requirements analysis & definition, system & software architecture, algorithm design and product cybersecurity, verification & validation.
Supplier Quality Engineer (Hybrid) RTXSupplier Quality Engineer (Hybrid)East Hartford, ConnecticutNot Required At RTX, the world largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world’s most complex problems. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
IAE Quality Engineer, Escape Management/Production Support (Onsite) RTXIAE Quality Engineer, Escape Management/Production Support (Onsite)East Hartford, ConnecticutLead the end-to-end Escape Management process for IAE AG and Pratt & Whitney operations, ensuring timely containment, root cause resolution, and effective corrective action across internal and supplier-driven escapes. Bachelors Degree or equivalent experience and minimum 8 years experience in quality engineering, manufacturing operations, and/or engineering experience; or An Advanced Degree in a related field and minimum 5 years experience.
NewPrincipal Embedded Software Engineer P4 (Onsite) RTXPrincipal Embedded Software Engineer P4 (Onsite)East Hartford, ConnecticutCDS develops complex, cyber-resilient control systems and software for commercial and military engines including power and thermal management Systems and auxiliary power units. CDS is responsible for all aspects of Pratt & Whitney engine control and diagnostic system development including requirements analysis & definition, system & software architecture, algorithm design and product software design, verification & validation.
NewProcess Engineer, Aftermarket (Onsite) RTXProcess Engineer, Aftermarket (Onsite)East Hartford, ConnecticutAdvanced degree and 3+ years of experience in Military, Manufacturing, Business Operations Management, Engineering, Aerospace or Aftermarket industry; OR Bachelor’s degree and 5+ years of relevant industry experience; OR Associate’s degree and 7+ years of relevant industry experience; OR High School diploma or Military / Technical Training and 9+ years of relevant industry experience. As a CTRP Process and Manufacturing Engineering (PME), the incumbent will report directly to the Connecticut Rotating Parts (CTRP) Engineering Manager and have responsibility for a subset of hardware flowing through the Connecticut Rotating Parts (CTRP) shop floor.
Product Design Engineer - Westfield, MA Michael Page USAProduct Design Engineer - Westfield, MAWestfield, MA$135,000–$160,000 / yearFull timeWith deep roots in highly regulated and technically demanding industries, they have built a strong reputation for delivering reliable solutions that perform under extreme conditions. The organization invests in modern engineering tools, rigorous testing capabilities, and professional development, creating an environment where engineers can grow their expertise and make a meaningful impact.
NewManufacturing Engineer - Automotive - Agawam, MA Michael Page USAManufacturing Engineer - Automotive - Agawam, MAAgawam, MA$75,000–$95,000 / yearFull timeThis individual will work closely with manufacturing, maintenance, quality, and leadership teams to improve safety, quality, productivity, and cost performance while supporting new product launches and capital investment projects. With significant investment in manufacturing capabilities and employee development, the company provides engineers with the opportunity to work on impactful projects that directly influence plant performance, efficiency, and product quality.
Manufacturing - Senior Mechanical Engineer - Vernon, CT Michael Page USAManufacturing - Senior Mechanical Engineer - Vernon, CTVernon, CT$100,000–$130,000 / yearFull timeWith a strong commitment to innovation and digital transformation, the company develops cutting-edge software, equipment, and automation solutions that help customers improve operational efficiency and productivity. This individual will lead mechanical design activities throughout the product lifecycle, including concept generation, prototyping, testing, validation, and production release.
NewSenior Mechanical Engineer Michael Page USASenior Mechanical EngineerTolland, CT$110,000–$130,000 / yearFull timeThe Senior Mechanical Engineer will play a key role within the R&D function, responsible for designing, developing, testing, and improving mechanical systems, components, and products from concept through production. Our Client is a global powerhouse in integrated technology solutions, revolutionizing how companies design, develop, and manufacture products made from textiles by automating, accelerating, and seamlessly streamlining every step of the process.
NewSenior Mechanical Engineer - Industrial - Windsor, CT Michael Page USASenior Mechanical Engineer - Industrial - Windsor, CTWindsor, CT$90,000–$130,000 / yearFull timeWith a long-standing reputation for innovation and engineering excellence, the company serves customers across multiple international markets and continues to invest heavily in research, product development, and digital transformation initiatives. Collaborating closely with electrical, software, manufacturing, and quality teams, this individual will lead mechanical engineering efforts from concept through production while ensuring products meet performance, quality, and cost objectives.
Transmission Planning Engineer ISO New England IncTransmission Planning EngineerWindsor, CT$96,000–$136,000 / yearThis study will examine the effects of the influx of clean energy resources like solar photovoltaics, onshore and offshore wind, and battery energy storage systems being constructed now and in the future, as well as increases in power consumption due to electrification of transportation and heating. Over the past twenty years, ISO New England planning engineers have played a key role in developing over 800 projects that have been placed in service totaling approximately $12 billion of new infrastructure investment.
Electric Grid Planning Engineer ISO New England Inc.Electric Grid Planning EngineerWindsor, CT$86,000–$115,000 / yearThis role supports the implementation and refinement of methodologies used to assess resource contributions to system adequacy and reliability and represents the organization in regional and national forums by providing analytical support for studies, committees, and regulatory discussions. Provide technical and procedural leadership by coordinating and facilitating work within the ISO and across a wide range of stakeholders, including Market Participants, NEPOOL and ISO committees, and regional and national regulatory entities.
Senior Engineer, Transmission System Planning (Hybrid schedule) Eversource EnergySenior Engineer, Transmission System Planning (Hybrid schedule)Hadley, MA$129,450–$143,830 / yearThe Senior Engineer conducts system studies of electric transmission system planning related to clean energy and large load integration, familiar of technical studies (e.g., load flows, stability studies, and transient network, short circuit analysis and Electromagnetic Transient Analysis (EMT)) to support clean energy and large load interconnections. Conduct and manage comprehensive power system impact studies (Feasibility, System Impact Studies) for utility-scale DER projects (Solar PV, Wind, BESS) and large Data Center interconnections (ranging from tens to hundreds of MWs).
Senior Transmission Planning Engineer ISO New England Inc.Senior Transmission Planning EngineerWindsor, CT$143,000–$180,000 / yearWhat we are looking for: Bachelor's degree in Electrical EngineeringThe ability to (expectations vary by job level): Complete studies to assess system reliability and determine transmission system solutions to resolve concernsDevelop data, assumptions, methodology and procedures for use in reliability studies of the New England bulk power systemPerform analysis to support NEPOOL, NPCC, and NERC Committee and Working Group work on regional and national transmission planning issuesInteract with stakeholders to seek input and address their concerns with respect to transmission system analysisDevelop and recommend new business processes and Planning Procedures to the management of Transmission PlanningProvide assistance in general Transmission Planning group administrationBe proficient in applying planning criteria and conducting computer simulations of transmission system performanceWork independently and in a team environment with minimal supervisionCommunicate at a high level of proficiency in both oral and written form. The Transmission Planning Team is the Planning Coordinator for the networked electrical transmission system in New England and has: Talented and knowledgeable engineers experienced in utilizing the latest modeling applicationsChallenging and complex work offering growth potentialOpportunities to interact with New England stakeholders including engineers associated with the region's transmission and generation ownersA team environment based on respect for all members and their contributions.
Senior Engineer, Transmission System Planning (Hybrid) Eversource EnergySenior Engineer, Transmission System Planning (Hybrid)Hartford, MassachusettsEmploys teamwork with engineers in System Planning, Transmission Asset Strategy, and engineers and operating personnel elsewhere in Electric Operations in performing analyses and providing technical support in planning and operational environments. Current guidelines require employees to work at least three days in the office, including Tuesdays and Wednesdays, with the third day set by the employee and supervisor based on department needs.
Senior Engineer, Systems Planning (Transmission) Hybrid Schedule Eversource EnergySenior Engineer, Systems Planning (Transmission) Hybrid ScheduleHartford, ConnecticutEmploys teamwork with engineers in System Planning, Transmission Asset Strategy, and engineers and operating personnel elsewhere in Electric Operations in performing analyses and providing technical support in planning and operational environments. Current guidelines require employees to work at least three days in the office, including Tuesdays and Wednesdays, with the third day set by the employee and supervisor based on department needs.
Engineer, Systems Planning (Transmission) Hybrid Schedule Eversource EnergyEngineer, Systems Planning (Transmission) Hybrid ScheduleHartford, ConnecticutEmploys teamwork with engineers in System Planning, Transmission Asset Strategy, and engineers and operating personnel elsewhere in Electric Operations in performing analyses and providing technical support in planning and operational environments. Current guidelines require employees to work at least three days in the office, including Tuesdays and Wednesdays, with the third day set by the employee and supervisor based on department needs.
Senior Resource Planning Engineer ISO New England IncSenior Resource Planning EngineerWindsor, CT$145,000–$180,000 / yearThis role supports the implementation and refinement of methodologies used to assess resource contributions to system adequacy and reliability and represents the organization in regional and national forums by providing analytical support for studies, committees, and regulatory discussions. Provide technical and procedural leadership by coordinating and facilitating work within the ISO and across a wide range of stakeholders, including Market Participants, NEPOOL and ISO committees, and regional and national regulatory entities.
Principal Engineer Transmission System Planning (Hybrid) Eversource EnergyPrincipal Engineer Transmission System Planning (Hybrid)Hartford, ConnecticutThe Principal Engineer must have extensive experience with modeling and planning the bulk electric power system, exhibit strong technical skills to apply to long-range load forecasting, testing and planning, and leverage company and industry data to anticipate optimal design for infrastructure improvements such as AC transmission lines, battery storage, FACTS devices, Inverter-Based Resources (IBR), etc. Interface with ISO-New England, area transmission owners, and Eversource departments, such as: UG and OH engineering, Substation Technical, Distributed Energy Resource (DER), Operations, and other departments to understand and mitigate electric system needs, challenges, and enable reliable future growth.
Principal Engineer, Transmission System Planning (Hybrid Schedule) Eversource EnergyPrincipal Engineer, Transmission System Planning (Hybrid Schedule)Hartford, MassachusettsThe Principal Engineer must have extensive experience with modeling and planning the bulk electric power system, exhibit strong technical skills to apply to long-range load forecasting, testing and planning, and leverage company and industry data to anticipate optimal design for infrastructure improvements such as AC transmission lines, battery storage, FACTS devices, Inverter-Based Resources (IBR), etc. Initiative and aggressiveness to search out problem areas, creativity to devise technically sound solutions and confidence to make technical decisions in solving complex problems based largely on own effort with little or no supervision.
NewAssociate Engineer, Transmission System Planning Eversource EnergyAssociate Engineer, Transmission System PlanningHartford, ConnecticutProviding support to more senior Engineers for interfacing with various ISO-NE staff, DER and Distribution System Planning, line and substation engineering, asset management, siting, environmental and permitting, operations, etc. for the determination of system impacts and proposed solutions. Role and Scope of Position: Associate Engineer in Transmission System Planning assists in transmission system studies and project development by carrying out assignments associated with the modeling and development of Eversource's transmission system.
Senior Engineer, Transmission System Planning (Non-Wires Alternative) NWA (hybrid schedule) Eversource EnergySenior Engineer, Transmission System Planning (Non-Wires Alternative) NWA (hybrid schedule)Hartford, CT$129,450–$143,830 / yearCompetencies: • Build trusting relationships • Manage and develop people • Foster teamwork and cross-functional collaboration • Lead change • Communicate strategic vision • Create an engaged workforce • Focus on the customer • Take ownership & accountability. This role is critical to ensure that all transmission projects presented to the regulatory entities in Massachusetts, Connecticut and New Hampshire are assessed for cost-effectiveness, reliability, and environmentally responsible alternatives to traditional infrastructure.