FULL_TIME

FEED

OTHER

Ability to work in both inside and outside environmental conditions, with exposure to elevated noise levels, extreme heat and cold, physical hazards - close proximity to moving parts, hot surfaces, pinch points, sparks, sharp edges, high pressure air, oxygen and gas lines (atmospheric conditions may require the use of a respirator). You will prepare samples using lathes grinders, cut-off machines, power saws, drill presses, milling and turning machines, polishing equipment, and measuring tools.

CF&I Steel, L.P.

Quality Assurance Inspector

equestftpin

UNKNOWN

As a NDT (Non-Destructive Testing) Senior Technician, you will perform mid-to-high level site inspections, conduct API and NDT field testing for multiple projects, document inspection results in report form, and communicate test results to construction site management. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California.

Olsson

API 510/570

GreenHouseAPI

Other: This position includes physical activity, personnel must be able to work in environments with the following conditions: repetitive motion, ventilated spaces, heavy lifting, traversing ladders and inclines/declines, climbing/crawling/navigating small and confined spaces, working in kneeling positions, frequent standing, working in hot workspaces due to natural or manmade environments. The Maintenance Manager will be responsible for leading, coordinating and executing maintenance, repairs and modification efforts on complex mechanical systems to ensure their successful support of the U.S. Navy’s Landing Craft, Air Cushion (LCAC) Amphibious Combat Vehicle (ACV) program on base.

FWG Solutions, Inc.

Maintenance Manager

lever_via_bold

Serve as a clinical liaison by developing and delivering comprehensive weekly and monthly reports to senior management that details installation and usage progress/metrics, staff training needs and effectiveness of completed training, and identifying trends to inform and strengthen KOL (Key Opinion Leader) relationships that support strategic decision making. For all positions, the Company encourages vaccination against COVID-19 and requires that the successful candidate hired be willing to test for the COVID-19 virus periodically and wear a face covering indoors as required, absent being granted an accommodation due to medical or sincerely held religious belief or other legally required exemption.

Fujifilm

Assoc Clinical Spec (Regional) (Location: Sacramento, San Jose or Bay Area)

[AW]-iCims

Assoc Clinical Spec (Regional) (Location: New Orleans)

This position must establish a solid network of reference with “partner” representatives who supply the same customers with non-competitive products and maintain a thorough understanding of competitive products and competitive positioning to ensure success and become a true “Endoscopic Consultant” for the customer. For all positions, the Company encourages vaccination against COVID-19 and requires that the successful candidate hired be willing to test for the COVID-19 virus periodically and wear a face covering indoors as required, absent being granted an accommodation due to medical or sincerely held religious belief or other legally required exemption .

Account Executive, Endoscopic (New York City)

The MIL Corporation is seeking a skilled and safety-focused Welder II to support manufacturing, fabrication, repair, maintenance, prototyping, testing, and integration activities associated with defense, government, and commercial programs at NAWCAD Webster Outlying Field (WOLF), St. The successful candidate will perform a variety of welding processes to fabricate, assemble, modify, and repair metal structures, equipment, components, support fixtures, and prototype articles in accordance with engineering drawings, technical specifications, work instructions, and quality requirements.

HOUR

The Mil Corp

Welder II

linkup_via_bold

Field Activities: Perform observations, testing, inspections, and sampling of various construction materials, including soils, aggregates, concrete, grout, masonry, asphalt and structural steel placement; Execute tasks based on project requirements under the guidance of senior technicians, staff professionals, and project managers; Inspections may also be conducted in fabrication facilities. ECS is currently ranked #60 in Engineering News-Record's Top 500 Design Firms (April 2026), #148 in Engineering News-Record's Top 200 Environmental Firms (October 2025) and #38 in Zweig Group's Hot Firm List (June 2026).

Why ECS? We have grit. What does that mean for you? We are problem solvers who approach obstacles with a fearless attitude. From trekking knee deep through swamplands to rappelling off of buildings, we do whatever it takes to safely get the job done! We have guts. The footprint of our company allows us to be nimble. With exceptional expertise and locations across the nation, we have the strength to support your project. We are resilient. We will ask the right questions, listen to your concerns and deliver. The opportunities to collaborate and think outside the box are infinite.  We take initiative. The work we do sometimes does not have an easy solution. It takes drive, determination and the ability to connect people and ideas to achieve remarkable results.   We bring tenacity. To put it plainly, we provide geotechnical engineering, construction materials testing, environmental consulting, and facilities engineering services. From conception to completion, our boots are made for working.
 
To find out more about ECS: <a href="http://www.ecslimited.com">www.ecslimited.com</a>

Engineering Consulting Services Ltd

Certified Welding Inspector

In this role, you will lead NBIS/NTIS inspections of bridges, tunnels, ancillary structures, and other transportation structure and deliver high quality technical documentation and reports that support our clients' infrastructure programs. WSP USA is providing the compensation range that the company in good faith believes it might pay and/or offer for this position within the state of Colorado, based on the successful applicant's education, experience, knowledge, skills, and abilities in addition to internal equity and specific geographic location.

YEAR

WSP Global Inc

Certified Bridge Inspection Team Leader

Education and/or Experience: Bachelor's degree and/or master's degree in civil engineering from an accredited four-year university or a minimum of 4 to 5 years of bridge or ancillary structure inspection experience. While performing the duties of this job, the employee is regularly required to sit; stand; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; and talk or hear.

Collins Engineers Inc

Bridge Inspection-Team Leader (50502)

CEL is a union firm with its corporate headquarters located in San Ramon, CA and has full-service facilities in Northern California, Hawaii, and Utah. You'll work in the field, take real ownership of your projects and work with project managers and technicians who count on your expertise.

Consolidated Engineering Laboratories (CEL)

AWS Certified Welding Inspector (CWI)

clearcompany

The NDI Technician - FPI Level II independently sets up, performs, interprets, evaluates, and documents fluorescent penetrant inspection (FPI/PT) on aerospace hardware in accordance with approved procedures, applicable specifications, and Beehive Industries' NDT written practice. The Level II serves as a technical resource for FPI execution, provides guidance and supervision to trainees and Level I personnel, and supports consistent, compliant special-process performance in accordance with NAS 410.

Beehive Industries

Non-Destructive Testing Inspector II

sourcestack_via_bold

As a NDT (Non-Destructive Testing) Senior Technician, you will perform mid-to-high level site inspections, conduct API and NDT field testing for multiple projects, document inspection results in report form, and communicate test results to construction site management. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the “CCPA”), this notice explains Olsson’s practices regarding the collection, use, and disclosure of personal information for job applicants residing in California.

Api 510/570

For PT/FPI Level I qualification, NAS 410 Revision 6 specifies a minimum of 16 hours of formal PT training and 130 hours of applicable experience; documented prior training and experience may be accepted only as permitted by Beehive's written practice and approved by the Responsible Level III or Examiner. This role processes and prepares parts, performs required equipment and system checks, documents inspection results, and works under the guidance or supervision of qualified Level II or Level III personnel as required by NAS 410.

Non-Destructive Testing Inspector I

Provides occupational therapy services to patients who have impairments, developmental disabilities, functional limitations, disabilities, or changes in physical function and health status resulting from injury, disease or other causes under occasional guidance. • Physical/Occupational Therapist Patient Education (Intermediate): Demonstrates mastery in communicating functional impact of assessment findings, treatment interventions, treatment planning diagnosis, and disease process.

Vanderbilt University Medical Center

Occupational Therapist (OT) - Pediatric Outpatient Therapy

The Manufacturing Engineer – Propulsion & Machinery Installation Planning defines the complex, high-precision installation steps and processes used to install, align, and commission main propulsion equipment, reduction gears, shafting, bearings, and associated drive train components aboard autonomous surface vessels. Plan installation, fit-up, and functional test sequencing for bow/stern ramp systems and ramp lowering/actuation systems specific to LCU-type vessel programs, including hydraulic or mechanical actuation components, hinge and pin arrangements, and ramp locking/securing mechanisms.

Saronic Technologies

Manufacturing Engineer – Propulsion & Machinery Installation Planning

Bachelor’s Degree from an accredited college or university (OR Associate’s Degree from an accredited college or university with a minimum of 2 years of professional work experience) AND / OR minimum of 5 years of experience supporting Field Services, Service Center repairs, equipment and tooling or similar industry equivalent. GE Vernova Inc. or its affiliates (collectively or individually, “GE Vernova”) sponsor certain employee benefit plans or programs GE Vernova reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion.

GE Vernova

OSS Subject Matter Expert (SME)

This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills.

V2X Inc

Welding Manager

Assoc Clinical Spec (Regional) (Location: Baltimore or DC area - no relocation)

Other: This position includes physical activity, personnel must be able to work in environments with the following conditions: repetitive motion, ventilated spaces, heavy lifting, traversing ladders and inclines/declines, climbing/crawling/navigating small and confined spaces, working in kneeling positions, frequent standing, working in hot workspaces due to natural or manmade environments. The Mechanical Maintenance Lead is responsible for overseeing, coordinating, and executing mechanical maintenance, repair, and modification activities on complex systems associated with air‑cushion vehicles, aircraft, or naval mechanical platforms.

Ndt Technician Jobs in the United States

Quality Assurance Inspector CF&I Steel, L.P.

API 510/570 Olsson

Maintenance Manager FWG Solutions, Inc.

Assoc Clinical Spec (Regional) (Location: Sacramento, San Jose or Bay Area) Fujifilm

Assoc Clinical Spec (Regional) (Location: New Orleans) Fujifilm

Account Executive, Endoscopic (New York City) Fujifilm

Welder II The Mil Corp

Certified Welding Inspector Engineering Consulting Services Ltd

Certified Bridge Inspection Team Leader WSP Global Inc

Bridge Inspection-Team Leader (50502) Collins Engineers Inc

AWS Certified Welding Inspector (CWI) Consolidated Engineering Laboratories (CEL)

Non-Destructive Testing Inspector II Beehive Industries

Api 510/570 Olsson

Non-Destructive Testing Inspector I Beehive Industries

Occupational Therapist (OT) - Pediatric Outpatient Therapy Vanderbilt University Medical Center

Manufacturing Engineer – Propulsion & Machinery Installation Planning Saronic Technologies

OSS Subject Matter Expert (SME) GE Vernova

Welding Manager V2X Inc

Assoc Clinical Spec (Regional) (Location: Baltimore or DC area - no relocation) Fujifilm

Mechanical Maintenance Lead FWG Solutions, Inc.

Similar Job Searches

See More Jobs

Stand out to leading employers.