Metrologist Diedre Moire Corp.MetrologistBuffalo Lake, NC$90,000–$140,000 / yearFull timeCONSIDERED EXPERIENCE INCLUDES: Metrologist Maintenance Calibration Technician Metrology Analytical Laboratory Instrumentation Validation Chromatography Mass Spectrometry HPLC UPLC GC MS GC/MS Chemistry Analyzers #DiedreMoire #JobSearch #JobHunt #JobOpening #Hiring #Job #Jobs #Careers #Employment #fieldservicejobs #technicianjobs #LabTechnicianJobs #MetrologistJobs #CalibrationTech. Shall travel to customer facilities and perform preventative maintenance, diagnostics testing, repairs, and calibration routines on analytical laboratory instruments and related equipment including High Performance Liquid Chromatographs, Gas Chromatographs, Liquid Chromatography-Mass Spectrometers, Gas Chromatography-Mass Spectrometers, or similar.
Metrologist Laboratory Instruments Diedre Moire Corp.Metrologist Laboratory InstrumentsChicopee, MA$90,000–$140,000 / yearFull timeCONSIDERED EXPERIENCE INCLUDES: Metrologist Maintenance Calibration Technician Metrology Analytical Laboratory Instrumentation Validation Chromatography Mass Spectrometry HPLC UPLC GC MS GC/MS Chemistry Analyzers #DiedreMoire #JobSearch #JobHunt #JobOpening #Hiring #Job #Jobs #Careers #Employment #fieldservicejobs #technicianjobs #LabTechnicianJobs #MetrologistJobs #CalibrationTech. Described compensation is not definite nor precise and may be estimated and approximate and is negotiable depending on market conditions and candidate availability and other factors and is solely at the discretion of employers.
Metrologist Lab Instruments Diedre Moire Corp.Metrologist Lab InstrumentsColumbus, GA$90,000–$140,000 / yearFull timeCONSIDERED EXPERIENCE INCLUDES: Metrologist Maintenance Calibration Technician Metrology Analytical Laboratory Instrumentation Validation Chromatography Mass Spectrometry HPLC UPLC GC MS GC/MS Chemistry Analyzers #DiedreMoire #JobSearch #JobHunt #JobOpening #Hiring #Job #Jobs #Careers #Employment #fieldservicejobs #technicianjobs #LabTechnicianJobs #MetrologistJobs #CalibrationTech. Described compensation is not definite nor precise and may be estimated and approximate and is negotiable depending on market conditions and candidate availability and other factors and is solely at the discretion of employers.
Metrologist Validation Diedre Moire Corp.Metrologist ValidationIlchester, MD$90,000–$140,000 / yearFull timeCONSIDERED EXPERIENCE INCLUDES: Metrologist Maintenance Calibration Technician Metrology Analytical Laboratory Instrumentation Validation Chromatography Mass Spectrometry HPLC UPLC GC MS GC/MS Chemistry Analyzers #DiedreMoire #JobSearch #JobHunt #JobOpening #Hiring #Job #Jobs #Careers #Employment #fieldservicejobs #technicianjobs #LabTechnicianJobs #MetrologistJobs #CalibrationTech. Described compensation is not definite nor precise and may be estimated and approximate and is negotiable depending on market conditions and candidate availability and other factors and is solely at the discretion of employers.
Metrologist CACIMetrologistBethesda, MarylandCACI is looking for a Metrologist to join the team at the Naval Surface Warfare Center, Carderock Divisions (NSWCCDs) Fabrication Team In this role, you will utilize high precision measurement equipment (coordinate measurement machines (CMMs), laser tracker equipment, ultrasonic devices, calipers, verniers, electronic protractors, squares, height gauges, depth gauges, indicators, and micrometers) and perform computerized spatial analysis. Experience with utilizing high precision measurement equipment (coordinate measurement machines (CMMs), laser tracker equipment, ultrasonic devices, calipers, verniers, electronic protractors, squares, height gauges, depth gauges, indicators, and micrometers) and performing computerized spatial analysis.
RF Metrologist Fortive CorporationRF MetrologistEverett, WA$101,200–$169,050 / yearWe're a force for progress, working alongside our customers and partners to solve challenges on a global scale, from workplace safety in the most demanding conditions to advanced technologies that help providers focus on exceptional patient care. If you are a seasoned RF metrologist who enjoys building capability, solving complex measurement challenges, and leading high-impact technical work, we'd love to hear from you.
Metrologist Fortive CorporationMetrologistEverett, WA$65,090–$108,675 / yearWe're a force for progress, working alongside our customers and partners to solve challenges on a global scale, from workplace safety in the most demanding conditions to advanced technologies that help providers focus on exceptional patient care. This includes development of uncertainty analysis in support of accredited calibrations, as well as control charting, statistical process controls, and design and development of automated test and measurement systems.
Metrologist (Part-Time or Full-Time) iMARK Molding, LLCMetrologist (Part-Time or Full-Time)Woodville, WIPart timeKnowledge of calibration systems, first article and mechanical inspection methods and gauging systems (including optical/Vision and automated/CMM), blueprint reading and geometric dimensioning and tolerancing, specification interpretation, process validation principles and protocols. Provide support and data to Quality Assurance and Engineering by performing First Article Inspections and Capability Studies as needed for new and existing product.
Metrologist Amatriot Group, LLCMetrologistWest Bethesda, MD$100,000–$130,000 / yearExperience with utilizing high precision measurement equipment (coordinate measurement machines (CMMs), laser tracker equipment, ultrasonic devices, calipers, verniers, electronic protractors, squares, height gauges, depth gauges, indicators, and micrometers) and performing computerized spatial analysis. In this role, you will utilize high precision measurement equipment (coordinate measurement machines (CMMs), laser tracker equipment, ultrasonic devices, calipers, verniers, electronic protractors, squares, height gauges, depth gauges, indicators, and micrometers) and perform computerized spatial analysis.
Metrologist II Applied Industrial Technologies IncMetrologist IIRaleigh, NCA two-year degree in Engineering, Life Sciences, other related technical field or equivalent military training and two years of applicable (Metrology, Instrumentation, Calibration) experience or the equivalent combination of education and experience. PCI is an FCX Performance Company and a Subsidiary of Applied Industrial Technologies (NYSE: AIT); a leading industrial distributor that offers more than 6.5 million parts to serve the needs of MRO and OEM customers in virtually every industry.
Senior Metrologist - ACT Arthrex IncSenior Metrologist - ACTSanta Barbara, CAMetrologist will write and execute Quality programs on programmable measurement equipment, verify programs with manufacturing and Quality Engineers, manage all CMM programming throughout ACT to profitably meet or exceed the internal and/or external client's expectations by providing superior quality products. Machine, Tools, and/or Equipment Skills: • Zeiss CMM (preferred) • Vision System programming skills • Creating Overlays • Use of all hand measuring instruments - Caliper, Micrometer, Ball Micrometer, Blade Micrometer, Point Micrometer, Anvil Micrometer, Height Gage, Drop Indicator.
NIAR Dimensional Metrologist II - Laser Tracker Operator Wichita State University CareersNIAR Dimensional Metrologist II - Laser Tracker OperatorWichita, KansasEstablishes technical requirements for metrology measurements, planning implementation of new metrology techniques and measurement methods, processes, software, and equipment. Performs tasks related to metrology measurements and analysis, including research and data collection, to support production.
NIAR Dimensional Metrologist II - CMM Programmer Wichita State University CareersNIAR Dimensional Metrologist II - CMM ProgrammerWichita, KansasThis position will perform tasks related to CMM Programming and CMM Operation using advanced 5 axis probing, analyze those measurements in a variety of metrology software packages and provide detailed reports and analysis. Establishes technical requirements for metrology measurements, planning implementation of new metrology techniques and measurement methods, processes, software, and equipment.
NIAR Dimensional Metrologist II - Laser Tracker Operator Wichita State UniversityNIAR Dimensional Metrologist II - Laser Tracker OperatorWichita, KSEstablishes technical requirements for metrology measurements, planning implementation of new metrology techniques and measurement methods, processes, software, and equipment. Performs tasks related to metrology measurements and analysis, including research and data collection, to support production.
Process and Sampling Technician 4 OR 5 - Electrical Metrologist Los Alamos National LaboratoryProcess and Sampling Technician 4 OR 5 - Electrical MetrologistLos Alamos, NM$72,800–$115,400 / yearNote to Applicants: Due to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China - including the special administrative regions of Hong Kong and Macau - as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. Essential Job Functions (can perform with or without reasonable accommodation): Reaching overhead, Reaching horizontally, Reaching down, Applying torque with hands or arms, Gripping with the hands, Pressing with hands or arms, Pushing with hands or arms, Pulling with hands or arms, Typing or keyboarding, Fine motor control, Use of both hands, Use of both arms, Use of both legs, Use of both feet.
NewMetrologist I Woodward L'OrangeMetrologist IZeeland, MichiganThe ideal candidate should have strong measurement and calibration skills, attention to detail, good documentation habits, and the ability to communicate clearly and manage tasks efficiently. This role involves calibrating measurement instruments, performing routine measurements, maintaining equipment, and accurately recording and reporting data.
Metrologist (Part-Time or Full-Time) ComarMetrologist (Part-Time or Full-Time)Woodville, WisconsinKnowledge of calibration systems, first article and mechanical inspection methods and gauging systems (including optical/Vision and automated/CMM), blueprint reading and geometric dimensioning and tolerancing, specification interpretation, process validation principles and protocols. Provide support and data to Quality Assurance and Engineering by performing First Article Inspections and Capability Studies as needed for new and existing product.
Metrologist LNN Pace Analytical Life SciencesMetrologistLititz, PennsylvaniaMetrologists are responsible for providing technical solutions and an advanced level of instrument support services to customers of TFS, including external clients, laboratory chemists within the Pace lab system, and departmental coworkers. With over 40 years of lab operations experience, we serve a range of industries, instruments and facilities nationwide -- meaning our team has unparalleled access to a plethora of shared knowledge powered by supportive leadership.
Metrologist CoorsTek IncMetrologistHillsboro, ORRoles & Responsibilities: • Requires the ability to learn and meet established department specific work instructions for basic hand inspection, measuring and test equipment as assigned. • Is familiar with the manufacturing computer system used to enter time, part transfers, scrap and any other transactions necessary to maintain accurate and timely records.
Metrologist Sun Pharmaceutical Industries LtdMetrologistChattanooga, TNDescription: Perform or assist with all essential tasks including troubleshooting, preventative maintenance, calibration, and qualification of laboratory instruments in accordance to all applicable SOP to ensure adherence to cGMP in support of the laboratory operation. Planning, execution and review of instrument calibration/qualification related activities as per the calibration masterplan.
Metrologist/CMM Programmer - (107578) SanminaMetrologist/CMM Programmer - (107578)Turtle Lake, WIRecognized as a technology leader, Sanmina Corporation provides end-to-end manufacturing solutions, delivering superior quality and support to Original Equipment Manufacturers (OEMs) primarily in the communications networks, defense and aerospace, industrial and semiconductor systems, medical, multimedia, computing and storage, automotive and clean technology sectors. Must have experience operating and/or programming CMMs, measures dimensions, using precision instruments, basic inspection tools, micrometer, calipers, height gauges, optical comparator, pin gauges, etc., ensure product meets specifications/drawings.
Metrologist/ Quality Inspector Aerosonic LLCMetrologist/ Quality InspectorClearwater, FLAssist in leading new product launch activities from a quality inspector perspective through participation in production readiness reviews, designing inspection plans, establishing new design fixture(s) and completing First Article Inspection Planning to ensure a new product's release to production is accomplished successfully with the most robust manufacturing inspection processes possible. § Conduct problem solving activities including data collection, problem identification, containment activities, root cause analysis, corrective action development, implementation, and verification for customer returns, internal non-conformities, audit findings, and process improvements.
Metrologist I CoorsTek IncMetrologist IOak Ridge, TNRoles & Responsibilities: Requires the ability to learn and meet established department specific work instructions for basic hand inspection, measuring and test equipment as assigned. Is familiar with the manufacturing computer system used to enter time, part transfers, scrap and any other transactions necessary to maintain accurate and timely records.
NewAssociate Director, Metrologist and Compliance Lead, Medical Devices and Combination Products Merck & Co IncAssociate Director, Metrologist and Compliance Lead, Medical Devices and Combination ProductsRahway, NJ$142,400–$224,100 / yearRequired Skills: Calibration Management Software, Data Analysis, Design Controls, Design Engineering, Design Thinking, Design Verification, Electronic Document Management System (EDMS), Laboratory Information Management System (LIMS), Manufacturing Methodologies, Measurement Systems Analysis (MSA), Medical Device Quality Systems, Medical Devices Design, Medical Product Development, Product Design, Product Development Design, Risk Management, Statistical Analysis. The Metrologist & Compliance Lead serves as a technical leader for laboratory metrology practices and quality compliance activities, supporting development activities for pipeline products from feasibility to commercialization including but not limited to design verification, test method development and validation, aging/ stability studies, process validation testing, incoming inspection, and release testing activities.
Quality Control Metrologist (PC-DMIS & Vision Systems) Marshall Innovative Manufacturing SolutionsQuality Control Metrologist (PC-DMIS & Vision Systems)Minneapolis, MNAs a full-time Quality Control Metrologist, you ensure every part meets the mark by uniting hands-on measurement with data-driven quality. Expect a supportive team with low turnover, where people are friendly, collaborative, and quick to help.
Metrologist II AbbottMetrologist IISaint Paul, MinnesotaEstablished eye-hand coordination, the capability to work with small precision devices and frequently used hand tools, a comprehensive knowledge of the calibration and test equipment, and the ability to work independently under minimal supervision • Demonstrated ability to read, write and converse in technical terminology, and perform a range of mathematical calculations and measurements. May serve as lead and assign work to less experienced personnel; reviews work of lower-level employees for quality and content; serves as a mentor when assisting less experienced staff in solving more complex problems.
NewMetrologist I Woodward IncMetrologist IMI$62,000–$81,000 / yearThe ideal candidate should have strong measurement and calibration skills, attention to detail, good documentation habits, and the ability to communicate clearly and manage tasks efficiently. This role involves calibrating measurement instruments, performing routine measurements, maintaining equipment, and accurately recording and reporting data.
Metrologist II Abbott LaboratoriesMetrologist IIMN$27.85–$55.65 / hourEstablished eye-hand coordination, the capability to work with small precision devices and frequently used hand tools, a comprehensive knowledge of the calibration and test equipment, and the ability to work independently under minimal supervision • Demonstrated ability to read, write and converse in technical terminology, and perform a range of mathematical calculations and measurements. May serve as lead and assign work to less experienced personnel; reviews work of lower-level employees for quality and content; serves as a mentor when assisting less experienced staff in solving more complex problems.
Sr. Metrologist/Quality Engineer ARCH Medical Solutions CorpSr. Metrologist/Quality EngineerMinneapolis, MN$90,000–$110,000 / yearHigh proficiency in use of computer programs including MS Office (Outlook, Excel, Word, PowerPoint) ERP systems (Epicor a plus), etc. ARCH is a consolidated contract manufacturing company-a combination of engineering expertise and precision-machining technologies to serve the medical, aerospace and defense, and industrial markets.
Metrologist Alutiiq LLCMetrologistMS$60,000–$70,000 / yearJob Duties and Responsibilities: Performs normal first line supervisor tasks including, but not limited to, assigning work priorities, approving PTO requests, approving time sheets, recommending awards and/or disciplinary action, and fostering technician growth by coaching/mentoring/training direct reports. Ensures compliance to NASA-STD-8739.12 and plans, organizes, and coordinates the activities of personnel involved in the rework and calibration of Inspection, Measurement and Test Equipment (M&TE) traceable to the International System of Units (SI).
QC Inspector/Metrologist (2nd Shift) Drake Plastics Ltd Co.QC Inspector/Metrologist (2nd Shift)Cypress, TXFull timeThe Quality Inspector (Inspector II) is an advocate who confirms that company documentation and products meet customer requirements and specifications using inspection techniques and collaborative continuous improvement efforts aligned with the production departments. Inspect parts visually and dimensionally to ensure that the product meets the specifications, including first articles, first-piece inspection, in-process, and final inspection.
Lead Metrologist/Technical Program Manager Energy NorthwestLead Metrologist/Technical Program ManagerRichland, WA$109,870–$164,806 / yearOther voluntary benefits may include flexible spending accounts (FSAs), tuition reimbursement, student loan repayment, childcare subsides, health reimbursement arrangement (HRA VEBA), health savings account (HSA), supplemental life insurances, credit monitoring/identity theft insurance, and more! AAS degree, two-year technical degree from an Instrumentation/Electrical program, or equivalent military training program and a minimum of ten years metrology, engineering or operation and maintenance experience, with at least five years in an industry related to calibration and/or M&TE.
Metrologist Composite MotorsMetrologistAdditionally, this position owns the calibration program for all measurement devices used in both the machine shop and production areas, including scheduling, performing, and documenting calibrations in compliance with ISO 13485 and FDA CFR 820. Position Overview : The Metrology & Calibration Technician is responsible for performing advanced dimensional inspection of machined components, tooling, fixtures, and production parts using CMMs and other precision measurement technologies.
Large Volume Metrologist - D Shift Blue Origin Enterprises LPLarge Volume Metrologist - D ShiftFLand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Metrologist Transcat IncMetrologistHouston, TXOperates equipment such as Multifunction Calibrators, Frequency Counters, Signal Generators, Spectrum Analyzers, Power Sensors and Network Analyzers, to perform daily calibrations, train technicians in the use of these instruments, and perform Design of Experiments (DOEs) in calculating Transcat's Calibration Measurement Capability (CMC) in multiple parameters of Metrology. Researches, develops and evaluates calibration systems and techniques that measure characteristics of objects, substances, or phenomena, such as length, mass, time, temperature, electric current, luminous intensity, and derived units of physical or chemical measure following good Metrology practice, in support of Transcat's Calibration Technicians by performing the following duties.
Metrologist CACI International IncMetrologistBethesda, MDThe Opportunity: CACI is looking for a Metrologist to join the team at the Naval Surface Warfare Center, Carderock Divisions (NSWCCDs) Fabrication Team In this role, you will utilize high precision measurement equipment (coordinate measurement machines (CMMs), laser tracker equipment, ultrasonic devices, calipers, verniers, electronic protractors, squares, height gauges, depth gauges, indicators, and micrometers) and perform computerized spatial analysis. Experience with utilizing high precision measurement equipment (coordinate measurement machines (CMMs), laser tracker equipment, ultrasonic devices, calipers, verniers, electronic protractors, squares, height gauges, depth gauges, indicators, and micrometers) and performing computerized spatial analysis.
Large Volume Metrologist Blue Origin Enterprises LPLarge Volume MetrologistFLand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training Required for certain Job Profiles: Ability to obtain and maintain Merchant Mariner Credential, which includes pre-employment and random drug testing as well as DOT physical. Dependent on role type and job level, employees may be eligible for benefits and bonuses based on the companys intent to reward individual contributions and enable them to share in the companys results, or other factors at the companys sole discretion.
NewMetrologist Nidec Motor CorporationMetrologistSt. Charles, ILThis position is responsible to oversee and perform layout inspections on supplier/customer submissions, and full dimensional inspections on assemblies; and is supervises Quality Inspectors and supports annual layouts as provided by the supplier and/or requested by the customer. Pre-approval from the Nidec Talent Acquisition team is required before any external candidate can be submitted and such candidate must be submitted to the Nidec Talent Acquisition team.
Metrologist Aetos SystemsMetrologistMerritt Island, FLOur leaders work hard every day to empower and support our employees in the development of their careers, giving back to their community, and providing their expertise and innovations to our customers - solving real-world business problems. The Metrologist will calibrate, repair, and maintain precision measuring equipment, such as electronic, electro-mechanical, physical, dimensional, mechanical, and optical Test, Measurement and Diagnostic Equipment (TMDE).
Metrologist Alcami CorporationMetrologistMorrisville, North CarolinaFull timeJob Summary: The Metrologist is a team player working in a fast-paced environment by performing calibration and preventive maintenance (PM) tasks of instruments including pressure, temperature, relative humidity, volumetric and mass in pharmaceutical manufacturing and laboratory environments. Such personal protective equipment may include, but not limited to safety eyewear, hearing protection, various types of respirators/breathing apparatus, lab coats, full protective body coverings, various types of gloves, etc.
NewSenior Metrologist Alcami CorporationSenior MetrologistSt. Louis, MissouriFull timeMetrologist is accountable for driving results in a fast-paced environment by performing calibration and diagnostics repair of process instrumentation including pressure, temperature, flow, relative humidity and mass in pharmaceutical manufacturing and laboratory environments. Such personal protective equipment may include, but not limited to safety eyewear, hearing protection, various types of respirators/breathing apparatus, lab coats, full protective body coverings, various types of gloves, etc.
Metrologist MedPharmMetrologistDurham, NCFull timeWork closely with Validations and Stability Manager, Lab Operations, R&D scientific teams (Emperor Boulevard, Manufacturing and Quality to ensure strict compliance with GMP guidelines, specifically to ensure to ensure instrumentation remains compliant and fit-for-purpose across both GMP and non-GMP operations. The role executes scheduled calibrations and preventative / corrective maintenance in compliance with GMP regulations, internal procedures, and research laboratory requirements, ensuring equipment is maintained in a state of control and fitness for intended use across both regulated and non-GMP environments.
Metrologist II FCX PerformanceMetrologist IIPCI Raleigh, North CarolinaA two-year degree in Engineering, Life Sciences, other related technical field or equivalent military training and two years of applicable (Metrology, Instrumentation, Calibration) experience or the equivalent combination of education and experience. PCI is an FCX Performance Company and a Subsidiary of Applied Industrial Technologies (NYSE: AIT); a leading industrial distributor that offers more than 6.5 million parts to serve the needs of MRO and OEM customers in virtually every industry.
Metrologist Thermo Fisher Scientific IncMetrologistGreenfield, INWith clinical trials conducted in 100+ countries and ongoing development of novel frameworks for clinical research through our PPD clinical research portfolio, our work spans laboratory, digital and decentralized clinical trial services. Our PPD Laboratory Services team has a direct impact on improving patient health through the expertise of scientists, industry thought-leaders and therapeutic experts.
Metrologist Precision Castparts CorpMetrologistCleveland, OHfor description go through this url https://pcctalentacquisitionportal.tal.net/vx/mobile-0/appcentre-ext/brand-7/candidate/so/pm/1/pl/3/opp/23121-Metrologist/en-GB .
Metrologist II (WI Local) Nissha Medical TechnologiesMetrologist II (WI Local)New Richmond, WisconsinLocated in New Richmond, Wisconsin, this campus brings together deep expertise in micro molding, precision tooling, and micro automated assembly to support devices where precision, reliability, and miniaturization truly matter. Our New Richmond team plays a critical role in helping customers turn complex ideas into scalable, manufacturable solutions for applications such as drug delivery, surgical robotics, diagnostics, and minimally invasive devices.
QC Metrologist Siegfried Holding AGQC MetrologistNJ$82,000–$105,000 / yearWith a team of more than 4,200 highly skilled professionals, we take the innovations of our pharmaceutical customers to industrial scale and manufacture safe drugs for patients worldwide. As a fully integrated CDMO, Siegfried is one of the few organizations today that can carry out the development and manufacturing of APIs and finished dosage forms under one roof.
Sr. Metrologist/Quality Engineer ARCHSr. Metrologist/Quality EngineerMinneapolis, MinnesotaHigh proficiency in use of computer programs including MS Office (Outlook, Excel, Word, PowerPoint) ERP systems (Epicor a plus), etc. ARCH is a consolidated contract manufacturing company-a combination of engineering expertise and precision-machining technologies to serve the medical, aerospace and defense, and industrial markets.
Lead Metrologist Sub-Zero GroupLead MetrologistGoodyear, AZWorks with business unit teams, engineering groups, and project teams to qualify internally manufactured products and solve problems. Performs measurements using CMM's, calipers, micrometers, pin gages, height gages, optical comparator, and other traditional measurement tools and equipment.
QC Metrologist Siegfried USAQC MetrologistPennsville, New JerseyWith a team of more than 4,200 highly skilled professionals, we take the innovations of our pharmaceutical customers to industrial scale and manufacture safe drugs for patients worldwide. As a fully integrated CDMO, Siegfried is one of the few organizations today that can carry out the development and manufacturing of APIs and finished dosage forms under one roof.