Calibration Technician MindlanceCalibration TechnicianSan Diego, CA$25.15–$31.44 / hourPreferred Qualifications: All of the minimum qualification areas is preferred, along with support experience in four or more of the following advanced calibration areas: - Digital signal generator calibration (LTE and TD-SCDMA). The role involves performing a wide range of calibrations on electronic and mechanical test equipment while ensuring compliance with applicable specifications, procedures, and accreditation requirements.
Calibration Technician eTeam Inc.Calibration TechnicianSan Diego, CA$31.44 / hourThe role involves performing a wide range of calibrations on electronic and mechanical test equipment while ensuring compliance with applicable specifications, procedures, and accreditation requirements. All of the minimum qualification areas is preferred, along with support experience in four or more of the following advanced calibration areas: - Digital signal generator calibration (LTE and TD-SCDMA).
Senior Technician, PMIC Product & Test Development Engineering Qualcomm IncSenior Technician, PMIC Product & Test Development EngineeringSan Diego, CA$28.02–$42.02 / hourGeneral Summary: The PMIC Product Development and Test Engineering (PDTE) group develops bench‑ and ATE‑based test solutions to enable silicon validation, characterization, qualification, and high‑volume manufacturing of Qualcomm's highly integrated Power Management and Analog ICs. This Senior Technician role is a hands‑on position focused on bench and ATE execution, hardware bring‑up, measurement reporting, and lab operations in support of PMIC design verification, new product introduction (NPI), and production support activities across the full product lifecycle.
Calibration Technician Artech LLCCalibration TechnicianSan Diego, CA$25–$29 / hourThe role involves performing a wide range of calibrations on electronic and mechanical test equipment while ensuring compliance with applicable specifications, procedures, and accreditation requirements. The Calibration Technician operates in a fast-paced laboratory environment requiring strong multitasking ability, technical expertise, and minimal supervision.
Calibration Technician A SIMCO ElectronicsCalibration Technician ASan Diego, CAThe Calibration Technician A will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, Electrical -- DC/Low Frequency, Electrical, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement accuracy. Calibrate inspection, measurement, and test equipment (IM&TE) in one or more of the following disciplines - Acoustical, Chemical, Dimensional, Electrical -- DC/Low Frequency, Electrical -- RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, Time & Frequency, to ensure compliance with published specifications.
Calibration Technician B SIMCO ElectronicsCalibration Technician BSan Diego, CAPosition Overview The Calibration Technician B will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement accuracy. Calibrate inspection, measurement, and test equipment (IM&TE) in one or more of the following disciplines - Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency, in order to ensure compliance with published specifications.
Quality Technician Fairbanks Morse LLCQuality TechnicianNational City, CAProvide our FMD aftermarket teams with direct support from the quality discipline to include inspection, objective quality evidence tracking and completion and other support as directed to aid in ensuring first time quality of aftermarket services in the field and service shops. We're one of the nation's leading marine defense contractors because of the highly trained and dedicated teams that provide reliable power systems, parts, and aftermarket services to the U.S. Navy, Coast Guard, Military Sealift Command, and Canadian Coast Guard.
Plating Technician (3rd Shift) Noveon MagneticsPlating Technician (3rd Shift)San Marcos, CaliforniaWe’re a fast-growing, diverse team of scientists, engineers, entrepreneurs, and innovators from across the globe united by a shared mission to support the commercialization of our magnet manufacturing technology and forge a new path toward resource efficiency, resource independence and a low-carbon economy. As the only U.S manufacturer of permanent rare earth magnets essential to a range of technologies that rely on an electric motor--from electric vehicles to medical devices to aerospace and defense systems to clean energy--we’re ushering in an electric future that is 100% Made in America.
Field Service Technician BLM GroupField Service TechnicianSan Diego, CaliforniaThey come to BLM GROUP USA for our expertise, deep network and nearly sixty years of experience in the industries we serve, and to partner with diverse teams of passionate, enterprising BLMers, dedicated to an inclusive approach to helping them grow and succeed at every stage of their business. Under direct supervision of the Service Manager, the Field Service Technician will perform new equipment installations, preventive maintenance, troubleshooting, and emergency repair of BLM equipment at the customer site.
Lead Technician, ASTERION - 1st Shift AMETEK, IncLead Technician, ASTERION - 1st ShiftSan Diego, CAFull timeAMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.5 billion. Lead a team of Technicians to perform a variety of testing and troubleshooting complex system using various test measurement equipment and automated test systems.
NewTechnician III General AtomicsTechnician IIIPoway, CAUnder general supervision with limited review, the Test Technician contributes to the maintenance, assembly, repair, and occasional enhancement of general laboratory, experimental, or commercial equipment. The Test Technician is responsible for setting up, operating, and troubleshooting test equipment to verify the performance and quality of electronic and/or electromechanical products.
Senior Test Technician eTeam Inc.Senior Test TechnicianSan Diego, CA$37.97 / hourDeductive and inductive problem solving is required; multiple approaches may be taken/necessary to solve the problem; often information is missing or incomplete; intermediate data analysis/interpretation skills may be required. " Most tasks require multiple steps which can be performed in various orders; some planning and prioritization must occur to complete the tasks effectively; mistakes may result in some rework.
NewMaintenance Technician II Mission Linen SupplyMaintenance Technician IIOceanside, California$25–$32 / hourMaintenance Supervisor, Maintenance Foreman, Maintenance Control Officer, Surface Maintenance Mechanic, Maintenance Shop Foreman, Logistic and Vehicle Maintenance Manager, Equipment Inspection and Maintenance, Electrical Maintenance of Armored Vehicles, Heavy Maintenance, Maintenance Manager, Maintenance Specialist, Equipment Technician, Machinist Mate Allied Trade Specialist 91E, Self Propelled Artillery Maintainer 91P, Construction Equipment Repairer 91L, Horizontal Construction Engineer 12N, Integrated Family Of Test Equipment (IFTE) Operator/Maintainer 94Y, Interior Electrician 12R, Land Combat Electronic Missile System Repairer 94A, M1 Abrams Tank System Maintainer 91A, Multiple Launch Rocket System (MLRS) Repairer 94P, Patriot System Repairer 94S, Plumber 12K, Prime Power Production Specialist 12P, Power Distribution Specialist 12Q, Quartermaster and Chemical Equipment Repairer 91J, Stryker Systems Maintainer 91S, Tactical Power Generation Specialist 91D, Test Measurement and Diagnostic Equipment Maintenance Support Specialist 94H, Track Vehicle Repairer 91H, Watercraft Engineer 88L. The Maintenance Technician's responsibilities are but not limited to repairing, maintaining, installing and troubleshooting industrial equipment, such as washers, dryers, steam tunnels, conveyor systems, and boilers.
Siemens-Gamesa Trained Wind Turbine Technicians Tetra Tech IncSiemens-Gamesa Trained Wind Turbine TechniciansSan Diego, CAWith 30,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science to address the entire water cycle, protect and restore the environment, design sustainable and resilient infrastructure, and support the clean energy transition. Consistently complete timecards with detailed descriptions of work performed, expense reports for reimbursement of airline baggage fees, company vehicle car washes and other job-related incidentals eligible for repayment.
Composite Technician Rock West Composites, Inc.Composite TechnicianSan Diego, CA$26–$32 / hourITAR Requirement: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder) as defined by 8 U.S.C. 1101(a)(20), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 1158, Must be authorized to work in the U.S. without the company's immigration sponsorship now or in the future. Knowledge of aircraft hardware, materials, and processes Strong math skills and mechanical aptitude Bi-Lingual Spanish preferred Education: High School Diploma US.
Technician IV General AtomicsTechnician IVSan Diego, CAGeneral Atomics (GA), and its affiliated companies, is one of the world's leading resources for high-technology systems development ranging from the nuclear fuel cycle to remotely piloted aircraft, airborne sensors, and advanced electric, electronic, wireless and laser technologies. The Power Systems Electrical Technician (DIII-D) is responsible for diagnosing, repairing, testing, and maintaining high-voltage pulsed power systems, DC power supplies, transformers, switchgear, and capacitor banks.
Ophthalmic Technician / Scribe Retina Consultants San DiegoOphthalmic Technician / ScribeLa Jolla, CARCSD has offices throughout San Diego, with our home base in Poway and Satellite offices in La Jolla, Carlsbad, Coronado, and Hillcrest. Ideally, we would find a motivated candidate with a strong work ethic, leadership qualities, and high attention to detail.
RESEARCH TECHNICIAN - Lippi Lab The Scripps Research InstituteRESEARCH TECHNICIAN - Lippi LabSan Diego, CA$18.67–$24 / hourWe have pioneered new conceptual and technological frameworks to interrogate these mechanisms, including inducible and reversible global microRNA loss-of-function, cell type-specific microRNA-target interaction mapping, scalable manipulation of individual regulatory elements, and single-cell, isoform-sensitive measurements of translation in vivo (Zolboot et al. POSITION SUMMARY: The Lippi lab at Scripps Research seeks a Research Technician as part of a growing team of investigators studying how post-transcriptional mechanisms instruct brain development and function.
Technician V General AtomicsTechnician VSan Diego, CAGA-EMS' expanding portfolio of specialized products and integrated system solutions support critical fleet, space systems and satellites, missile defense, power and energy, and process and monitoring applications for defense, industrial, and commercial customers worldwide. Determine and/or follow methods and sequences of operations in performing assembly tasks such as wiring, component installation, hand soldering, and cable harnessing on assembly units.
Manufacturing Technician II / III (6:00 AM or 12:00 PM Start Time) Argonaut Manufacturing Services IncManufacturing Technician II / III (6:00 AM or 12:00 PM Start Time)Carlsbad, CA$21–$27 / hourBachelor''s degree in a related field (Biotechnology, Molecular Biology, or Biochemistry) with 2+ years of work experience at Argonaut or in manufacturing within a cGMP environment; Associate''s degree in a related field with 3+ years of related experience; or High school diploma/equivalent with 5+ years of related manufacturing experience in a cGMP environment. Bachelor''s degree in a related field (Biotechnology, Molecular Biology, or Biochemistry) with at least 1 year of work experience at Argonaut or in manufacturing within a cGMP environment; Associate''s degree in a related field; or High school diploma/equivalent with 3+ years of related manufacturing experience in a cGMP environment.
NDT Technician 2nd shift Chromalloy Gas Turbine LLCNDT Technician 2nd shiftSan Diego, CAChromalloy participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Any offer of employment will also be conditioned upon the successful completion of a background investigation and drug screen in accordance with company policy and applicable federal and state regulations. We are a leading provider of aftermarket parts, repairs, and solutions that safely & reliably extend the life of aircraft engines and gas turbines.
Principal Lightspeed Technician Resonetics, LLCPrincipal Lightspeed TechnicianSan Diego, CA$31.25–$45.19 / hourThe Principal Lightspeed Technican is primarily responsible for assisting Application Development Engineers in demonstrating process feasibility and meeting quality specifications on Lightspeed ADL projects. Read and interpret print specifications on Lightspeed projects, ensure all required visual and geometric measurements are taken and documented per Quality Systems requirements.
Foam Cutting Technician Strategic Operations IncFoam Cutting TechnicianSan Diego, CA$24–$27 / hourSTOPS calls this type of immersion training - Hyper-Realistic and defines it as "such a high degree of fidelity in the replication of specific conditions in a training environment that participants so willingly suspend disbelief that they become totally immersed and eventually stress inoculated" - all their senses tell them, emotionally and intellectually, that the scenarios are real. STOPS is committed to excellence through state-of-the-art live action training support - employing "Hollywood" style special effects, role players, props of all kinds, 3D targets, the re-locatable habitat unit (RHU), and the conversion of shipping containers to create immersive training environments that are the most unique in the industry.
NewEngineering Technician - Manufacturing Integrated Polymer SolutionsEngineering Technician - ManufacturingSan Diego, CAMAST Technologies seeking a Manufacturing Technician 1 who tends to production machines such as spray booth, clicker press, dip machine, presses, rubber mills, sander, laminator and includes various touch labor activities. We offer a full suite of benefits, including medical, dental, vision, short and long-term disability coverage, accident insurance, critical illness insurance, basic and supplemental life insurance, employee assistance plan, retirement savings and matching, and other developmental opportunities.
NewEngineering Technician 2-USD MindlanceEngineering Technician 2-USDSan Diego, CAYou will conduct a wide variety of laboratory tasks including instrument calibrations, test bath preparation, bath pump maintenance, temperature measurement, buffer and stock solution preparation, as well as collection and organization of test data. You are able to run complex test methods involving multiple software programs controlling several instruments in concert with precise coordination of the test sequence and timing.
Plating Technician FormFactor IncPlating TechnicianCarlsbad, CAThis role supports daily manufacturing operations by executing plating processes to specification, monitoring chemical baths, inspecting product quality, and maintaining a safe and compliant work environment. FormFactor, Inc. (NASDAQ: FORM), is a leading provider of essential test and measurement technologies along the full semiconductor product life cycle - from characterization, modeling, reliability, and design de-bug, to qualification and production test.
Reagent Management Services (RMS) Technician, Lab Services Jones Lang LaSalle IncReagent Management Services (RMS) Technician, Lab ServicesSan Diego, CAWhat this job involves: The Reagent Management Services (RMS) Technician, Lab Services supports chemistry operations by managing procurement, receiving, inventory, and material transfers between sites with minimal supervision. Whether you've got deep experience in commercial real estate, skilled trades or technology, or you're looking to apply your relevant experience to a new industry, join our team as we help shape a brighter way forward.
Manufacturing Technician (2nd Shift) Tue-Sat & Sun-Thu Axillon Aerospace, Inc.Manufacturing Technician (2nd Shift) Tue-Sat & Sun-ThuSan Diego, CA$23–$28Full timeJOB SUMMARY: The successful Manufacturing Technician performs a variety of manufacturing processes such as pre-stacking, kitting, presses, molding, layup, noodles and deflashing associated with the fabrication of aerospace composite materials in connection with production contracts. Comprised of six, purpose-built centers of excellence throughout the USA and Mexico, each strategically focused on serving specific markets across aerospace engines and airframes, as well as munitions, radomes, antennas and fuel containment.
Manufacturing Technician (2nd Shift) Tuesday-Saturday Axillon Aerospace, Inc.Manufacturing Technician (2nd Shift) Tuesday-SaturdaySan Diego, CA$23–$28Full timeJOB SUMMARY: The successful Manufacturing Technician performs a variety of manufacturing processes such as pre-stacking, kitting, presses, molding, layup, noodles and deflashing associated with the fabrication of aerospace composite materials in connection with production contracts. Comprised of six, purpose-built centers of excellence throughout the USA and Mexico, each strategically focused on serving specific markets across aerospace engines and airframes, as well as munitions, radomes, antennas and fuel containment.
Manufacturing Technician (3rd Shift) Sunday-Thursday Axillon Aerospace, Inc.Manufacturing Technician (3rd Shift) Sunday-ThursdaySan Diego, CA$23–$28Full timeJOB SUMMARY: The successful Manufacturing Technician performs a variety of manufacturing processes such as pre-stacking, kitting, presses, molding, layup, noodles and deflashing associated with the fabrication of aerospace composite materials in connection with production contracts. Comprised of six, purpose-built centers of excellence throughout the USA and Mexico, each strategically focused on serving specific markets across aerospace engines and airframes, as well as munitions, radomes, antennas and fuel containment.
Principal Lightspeed Technician ResoneticsPrincipal Lightspeed TechnicianSan Diego, California$31.25–$45.19 / hourFull timeThe Principal Lightspeed Technican is primarily responsible for assisting Application Development Engineers in demonstrating process feasibility and meeting quality specifications on Lightspeed ADL projects. Read and interpret print specifications on Lightspeed projects, ensure all required visual and geometric measurements are taken and documented per Quality Systems requirements.
Fire Alarm/Low Voltage Technician Symons Fire Protection IncFire Alarm/Low Voltage TechnicianSan Diego, CAAs a Fire Alarm Technician, you will: Install and service fire alarm control panels, audible/visual notification devices, pull stations, smoke detectors, heat detectors, and other fire alarm components. At Symons Fire Protection, we are committed to delivering high-quality life safety systems while providing a supportive work environment where employees can grow their skills and build rewarding careers.
** Calibration Technician Dwyer Instruments, Inc.** Calibration TechnicianSan Marcos, CA$22–$24 / hourThe company offers over 300,000 state-of-the-art products for process measurement and control of temperature, humidity, pressure, strain, force, flow, level, pH, conductivity, and indoor air quality, and is a recognized global leader in the digital marketing of technical products. Essential/Preferred Skills: 1 or more years' experience working in a manufacturing environment or demonstrated proficiency in advanced mathematics will be considered in lieu of experience.
NewWorkshop Technician Professional CorporationWorkshop TechnicianSan Diego, CATwo years mechanical trade school or degree in engineering, business or supply chain management and two years' experience in workshop, warehouse or parts distribution management or 4+ years' workshop, warehouse or parts distribution management experience. Organizes the return of non-compliance materials, warranty returns, salvageable cores, damaged or used material by preparing material return documentation and processing material returns with suppliers.
NewEngineering Technician TDKEngineering TechnicianChula Vista, CA$55,000–$80,000 / yearAcquired by TDK in 2008, TDK-Lambda Americas Inc. represents the culmination of three well-established North American power manufacturers: Electronic Measurements Inc., Lambda Electronics, and Innoveta Technologies. Confers with Engineering, and other technical personnel to resolve testing problems such as product or equipment issues, malfunctions, incomplete test data and data interpretation.
RESEARCH TECHNICIAN - Lippi Lab Scripps ResearchRESEARCH TECHNICIAN - Lippi LabSan Diego, CA$18.67–$24 / hourPart timeWe have pioneered new conceptual and technological frameworks to interrogate these mechanisms, including inducible and reversible global microRNA loss-of-function, cell type–specific microRNA–target interaction mapping, scalable manipulation of individual regulatory elements, and single-cell, isoform-sensitive measurements of translation in vivo (Zolboot et al. Ensure laboratory personnel are maintaining a clean, organized workspace, upkeep laboratory inventory by ordering reagents and other supplies and place maintenance requests for laboratory apparatus and facility.
Engineering Technician, Intermediate Qualcomm IncEngineering Technician, IntermediateSan Diego, CA$22.85–$34.27 / hourSets up test equipment using hand tools or automatic test methods to perform tests of circuits, components, instruments, and mechanical assemblies. Qualcomm expects its employees to abide by all applicable policies and procedures, including but not limited to security and other requirements regarding protection of Company confidential information and other confidential and/or proprietary information, to the extent those requirements are permissible under applicable law.
Critical Facilities Technician II Orthofix Medical IncCritical Facilities Technician IICarlsbad, CA$20.60–$33.33 / hourEducation/Certifications: IFMA Facility Management Professional (FMP) BOMA Facilities Management Administrator (FMA) SMRP Certified Maintenance & Reliability Technician (CMRT or CMRP) Additional Experience, Skills, Knowledge and/or Abilities: Demonstrated leadership and mentoring capability HVAC maintenance and repair experience Experience supporting or leading safety and compliance programs PHYSICAL REQUIREMENTS / ADVERSE WORKING CONDITIONS The physical requirements listed in this section include but are not limited to the motor/physical abilities, skills, and/or demands required of the position in order to successfully undertake the essential duties and responsibilities of this position. Ability to lift up to 50 lbs Ability to work on ladders, in confined spaces, and around energized equipment May require off-shift, on-call, or weekend support as needed The position requires frequent or continuous use of vibrating tools or equipment that typically have moderate to high vibration levels (jigsaw, grinders, sanders, etc.).
Meter Technician San Diego ConserviceMeter Technician San DiegoSan Diego, CAOur Meter Technicians install, maintain, and repair Conservice submeters, allowing our billing team to accurately track and bill utility usage by the unit or individual apartment. Responsibilities include, but are not limited to: Install, program, and configure submeters and related communication systems in multifamily homes, apartment complexes, and retail areas.
NewSurvey CAD Technician III Bowman Consulting GroupSurvey CAD Technician IIISan Diego, CA$27–$40 / hourDemonstrated proficiency in land surveying and/or surface modeling software such as AutoCAD, Civil 3D, Trimble Business Center, SmartDraft, Trimble Access, or similar civil engineering design software. It is anopportunity to be part of a diverse and engaged community of professionals, to be treated as a respected and valued member of a motivated team and to be empowered to do exceptional work that advances the best interest of everyone involved.
NewSurvey CAD Technician II Bowman Consulting GroupSurvey CAD Technician IISan Diego, CA$20–$27 / hourDemonstrated proficiency in land surveying and/or surface modeling software such as AutoCAD, Civil 3D, Trimble Business Center, SmartDraft, or similar civil engineering design software. It is anopportunity to be part of a diverse and engaged community of professionals, to be treated as a respected and valued member of a motivated team and to be empowered to do exceptional work that advances the best interest of everyone involved.
Field Operations Technician SunrunField Operations TechnicianSan Diego, CaliforniaPrevious PV design, PV installation or PV electrical experience (such as reading blueprints or plans, using tools and equipment, testing wiring or circuitry, National Electric Code knowledge, basic electrical theory knowledge, etc.) is helpful with a minimum of one year of field construction experience preferred. The Hybrid Field Technician supports both the beginning and end of the residential solar installation pipeline by performing site assessments prior to installation, inspections post-install, and other lone worker and team field work as needed for the business.
NewPutter Engineering Lab Technician Taylor Made GolfPutter Engineering Lab TechnicianCarlsbad, CaliforniaPutter Engineering Lab Technician performs custom golf club assembly assignments of a non-routing nature and with significant complexity and variety. Ability to communicate fluently in English both verbally and in writing and demonstrated skills in reading and following written directions in English.
Behavior Technician, Severe Behavior Services full time $26-$28 an hour Easter Seals Southern CaliforniaBehavior Technician, Severe Behavior Services full time $26-$28 an hourEscondido, CaliforniaKNOWLEDGE, SKILLS, ABILITIES: Demonstrated competency in approaches to intervention, based on the science of Applied Behavior Analysis; competency in employing behavior analytic methodologies, including discrete trial and naturalistic teaching procedures, differential reinforcement, continuous and discontinuous measurement, and crisis/emergency procedures. Ability to maintain positive consumer interaction and professionalism, communicate effectively through oral and written skills, and work cooperatively with a variety of individuals and groups; demonstrated ability to interact well with participants, their families, and to maintain positive and cordial demeanor.
Associate Technician Product Testing Taylor Made GolfAssociate Technician Product TestingCarlsbad, CaliforniaThis person will work closely with engineers to develop tests that simulate on-course play and is responsible for planning and maintaining an efficient test schedule, as well as working with The Kingdom staff to coordinate testing schedules. Conduct full tests and inspections, including the set-up of equipment and tools necessary to perform tests, compiling and plotting data, and submitting results to the designated person.
Electronics Technician 4 Monarch QuantumElectronics Technician 4San Diego, CaliforniaExecute complex technical tasks including test setup, data collection, troubleshooting, and documentation, following established processes and participating in peer reviews. You will be expected to work independently, communicate proactively, and mentor junior technicians while owning complex technical tasks from prototype build to system‑level testing.
Technician Engineering Putter Lab Taylor Made Golf Company, Inc.Technician Engineering Putter LabCarlsbad, CA$25–$30 / hourKnowledge and Skills Requirements: Ability to communicate fluently in English both verbally and in writing and demonstrated skills in reading and following written directions in English. Technician Putter Engineering performs custom golf club assembly assignments of a non-routing nature and with significant complexity and variety.
Electronics Lab Technician Chaos IncElectronics Lab TechnicianSan Diego, CA$50–$63 / hourCompensation Components: Competitive base salaries, generous pre-IPO stock option grants, relocation assistance, and (coming soon!) annual bonuses. Responsibilities: Testing & Measurement: Set up and operate specialized RF test equipment, including spectrum analyzers, network analyzers (VNA), signal generators, and oscilloscopes.
Associate Technician Product Testing Taylor Made Golf Company, Inc.Associate Technician Product TestingCarlsbad, CA$22–$24 / hourThis person will work closely with engineers to develop tests that simulate on-course play and is responsible for planning and maintaining an efficient test schedule, as well as working with The Kingdom staff to coordinate testing schedules. Conduct full tests and inspections, including the set-up of equipment and tools necessary to perform tests, compiling and plotting data, and submitting results to the designated person.
Senior Technician R&D Testing Cobra Golf Puma SESenior Technician R&D Testing Cobra GolfCarlsbad, CA$24.90–$33.13 / hourOperate test equipment such as robots, launch monitors, air cannons, 3D scanners, and shaft measurement machines to determine performance and durability parameters of new golf club designs. SPEED & SPIRIT is what we look for in our candidates, defined by some simple values that inspire us to BE DRIVEN in our performance, BE VIBRANT in our sporting legacy, BE TOGETHER in our team spirit, and to let our individual talent and experience shine.