Sentinel - Staff Material Process Engineer - *17371 Northrop Grumman CorpSentinel - Staff Material Process Engineer - *17371Roy, UT$139,000–$208,600 / yearWhat You Will Get To Do: Responsible to perform full spectrum of design application parts management tasks on assigned system and sub-systems to ensure streamlined risk identification, risk mitigation, and tracking of at-risk component issues during the design and manufacturing of weapon systems and equipment under an overarching Systems Engineering framework. Collaborates with systems engineers, design engineers, project managers, reliability engineers, and external customers to establish clear part, material and manufacturing process design documentation traceability to system performance.
Sentinel - Sr Principal Metals & Corrosion Material Process Engineer- *17364 Northrop Grumman CorpSentinel - Sr Principal Metals & Corrosion Material Process Engineer- *17364Roy, UT$111,700–$167,500 / yearWhat You Will Get To Do: Responsible to perform full spectrum of corrosion management tasks on assigned system and sub-systems to ensure streamlined risk identification, risk mitigation, and tracking of corrosion issues during the design of weapon systems and equipment under an overarching Systems Engineering framework. Collaborates with systems engineers, design engineers, project managers, reliability engineers, and external customers for establishing corrosion best practices for galvanic assessments, service life predictions, failure analysis, and 3D modeling.
Sentinel - Staff Metals & Corrosion Material Process Engineer- 18481 Northrop Grumman CorpSentinel - Staff Metals & Corrosion Material Process Engineer- 18481Roy, UT$139,000–$208,600 / yearWhat You Will Get To Do: Responsible to perform full spectrum of corrosion management tasks on assigned system and sub-systems to ensure streamlined risk identification, risk mitigation, and tracking of corrosion issues during the design of weapon systems and equipment under an overarching Systems Engineering framework. Collaborates with systems engineers, design engineers, project managers, reliability engineers, and external customers for establishing corrosion best practices for galvanic assessments, service life predictions, failure analysis, and 3D modeling.
Sr Principal Engineer Material Process 17366 Northrop Grumman CorpSr Principal Engineer Material Process 17366Roy, UT$111,700–$167,500 / yearWorking knowledge of Destructive Physical analysis (M1580), Failure Analysis, physics of failure, Root Cause & Corrective Action, component specifications, component screening & qualification, component application qualification, and related installation/assembly process specifications. What You'll Get To Do: Work with design engineers in selection and application of Electrical, Electronics, Electro-Mechanical, Electro-Optical (EEEE) parts, including Microcircuits, Connectors, Passive Devices, and Printed Circuit Boards.
Sentinel - Engineer Material Process - EEEE 18076 Northrop Grumman CorpSentinel - Engineer Material Process - EEEE 18076Roy, UT$72,100–$108,100 / yearWhat You'll Get To Do: Work with design engineers in selection and application of Electrical, Electronics, Electro‑Mechanical, Electro‑Optical (EEEE) parts, including Microcircuits, Connectors, Passive Devices, and Printed Circuit Boards. Northrop Grumman has opportunities waiting for you that play a vital role in human space exploration, national defense, and scientific discovery, supporting multiple programs across the universe.
Principal Material Process Engineer 18025* Northrop Grumman CorpPrincipal Material Process Engineer 18025*Roy, UT$89,400–$134,200 / yearWorking knowledge of Destructive Physical analysis (M1580), Failure Analysis, physics of failure, Root Cause & Corrective Action, component specifications, component screening & qualification, component application qualification, and related installation/assembly process specifications. What You'll Get To Do: Work with design engineers in selection and application of Electrical, Electronics, Electro-Mechanical, Electro-Optical (EEEE) parts, including Microcircuits, Connectors, Passive Devices, and Printed Circuit Boards.
Sentinel - Principal Metals & Corrosion Material Process Engineer- 17326 & 17327 Northrop Grumman CorpSentinel - Principal Metals & Corrosion Material Process Engineer- 17326 & 17327Roy, UT$89,400–$134,200 / yearWhat You Will Get To Do: Responsible to perform full spectrum of corrosion management tasks on assigned system and sub-systems to ensure streamlined risk identification, risk mitigation, and tracking of corrosion issues during the design of weapon systems and equipment under an overarching Systems Engineering framework. Collaborates with systems engineers, design engineers, project managers, reliability engineers, and external customers for establishing corrosion best practices for galvanic assessments, service life predictions, failure analysis, and 3D modeling.
Sentinel-Principal Material Process Engineer 17334* Northrop Grumman CorpSentinel-Principal Material Process Engineer 17334*Roy, UT$89,400–$134,200 / yearWhat You Will Get To Do: Perform full spectrum of design application parts management tasks on assigned system and sub-systems to ensure streamlined risk identification, risk mitigation, and tracking of at-risk component issues during the design and manufacturing of weapon systems and equipment under an overarching Systems Engineering framework. Collaborate with systems engineers, design engineers, project managers, reliability engineers, and external customers to establish clear part, material, and manufacturing process design documentation traceability to system performance.
Product Support Coordinator B - Materials (Kit Room) Parker Hannifin CorpProduct Support Coordinator B - Materials (Kit Room)Ogden, UTThe Product Support Coordinator with direct guidance in a team environment, responsible for performing a variety of product support duties following well defined procedures and processes in one or more of the following functions: raw stock, parts identification, shipping, receiving, stockroom, stock handling, clean operations, parts handling, etc. We are the preferred supplier of flight control solutions for the commercial, regional, business jet and advanced air mobility marketplace by offering a premier customer experience with superior engineered products that exceed our customer and regulatory requirements.
Construction Materials ICC Inspector I - Ogden Terracon Consultants IncConstruction Materials ICC Inspector I - OgdenOgden, UTGeneral Responsibilities: Construction Inspectors spend the majority of their time working on projects performing construction related inspection requiring specific certifications and/or experience. ICC certification (Reinforced Concrete, Spray-applied Fireproofing, Structural Masonry, Prestressed/Post-Tensioned Concrete, Structural Steel - Bolting, Structural Steel - Welding).
Sentinel- Principal Material Process Engineer -*17334 Northrop Grumman CorpSentinel- Principal Material Process Engineer -*17334Roy, UT$89,400–$134,200 / yearWorking knowledge of MIL-STD-11991 and application to missile programs, MIL-STD-1568 for corrosion prevention of Aerospace Weapons Systems, and MIL-STD-7179 Finishes, Coatings, and Sealants for the Protection of Aerospace Weapons Systems. Working knowledge of Failure Analysis, Root Cause & Corrective Action, component specifications, component screening & qualification, component application qualification, and related installation/assembly process specifications for space, air vehicle, ground support applications.
Sentinel - Material Process Engineering Manager 2 - 18821 Northrop Grumman CorpSentinel - Material Process Engineering Manager 2 - 18821Roy, UT$126,600–$189,800 / yearUnderstand and align with the Team's Statement of Work across multiple disciplines, integrating requirements from reliability, accelerated life testing, nuclear hardness/surety, cyber security, environmental constraints, system safety, EMEE, materials/processes, human factors, and system security engineering. The ideal candidate is capable of creating and managing high performing teams while providing technical, administrative and management expertise in the day to day activities required to successfully execute complex engineering programs.
Design Engineer / Principal Design Engineer CSA - Civil Engineer 17704 Northrop Grumman CorpDesign Engineer / Principal Design Engineer CSA - Civil Engineer 17704Roy, UTSupporting structured trade studies to evaluate alternative design solutions to resolve technical issues Supporting structured trade studies to evaluate alternative design solutions to resolve technical issues. Basic Qualifications: • Design Engineer: Bachelor''s degree with 2 years' experience; 0 years' experience with a Master's degree Design Engineer: Bachelor''s degree with 2 years' experience; 0 years' experience with a Master's degree.
Sr Mechanical Engineer Odyssey Systems Consulting Group, Ltd.Sr Mechanical EngineerOgden, UtahFull timeBachelor’s degree in related discipline from an ABET-accredited engineering program and 20 years of relevant experience; OR Master’s degree in related discipline from an ABET-accredited engineering program and 15 years of relevant experience; OR PhD in related discipline from an ABET-accredited engineering program and 5 years of relevant experience. Position Summary: Odyssey has an exciting opportunity for a Senior Mechanical Engineer supporting an Air Force acquisition mission within the Air Force Life Cycle Management Center (AFLCMC), Armament Directorate Munitions Division (AFLCMC/EBH) at Hill Air Force Base, UT.
NewSubstation Protection & Control - Engineer III QualusSubstation Protection & Control - Engineer IIIFarmington, UtahFull timeDevelopment of complete engineering design packages for protective relaying and communications systems, including one-line diagrams, three-line diagrams, AC schematics, DC schematics, logic and functional diagrams, panel layouts, control house layouts, wiring/connection diagrams, interconnection diagrams, relaying equipment specifications and bill of materials. The firm partners with utilities, commercial, industrial, data center, and government clients, and renewable and energy storage developers, offering comprehensive solutions through boutique and integrated advisory, planning, engineering, digital solutions, program management, energy efficiency and specialized field services.
Packaging Engineer PEAK Technical Services Inc.Packaging EngineerOgden, UT$90,000–$110,000 / yearQualifications: BS in Packaging Engineering strongly preferred; Mechanical/Industrial acceptable, 3-5 years of related experience, CAD & Packaging: SolidWorks/NX/CATIA; ArtiosCAD for corrugated/dunnage; read drawings, GD&T, basic tolerance stacks. Coordinate with internal teams (engineering, manufacturing, sales, finance, etc.) and our packaging vendors for new and existing projects to find opportunities to reduce cost and improve performance, efficiencies, and safety.
Structural Analysis Engineer (2/3) - MRB (Fri - Su) Northrop Grumman CorpStructural Analysis Engineer (2/3) - MRB (Fri - Su)Clearfield, UT$77,200–$115,800 / yearBasic Qualification: Level 2: Bachelor's Degree in STEM field (Science, Technology, Engineering or Mathematics) with 2 years of related engineering experience; OR a Master's Degree in a STEM field Level 3: Bachelor's Degree in STEM field (Science, Technology, Engineering or Mathematics) with 5 years of related engineering experience; OR a Master's Degree in a STEM field with 2 years of related experience; OR a PhD in a STEM field with 0 years of experience. Preferred Qualifications: • Practical understanding of composite structures • Experience with structural repair for composite and metallic structures • Experience with finite element software such as Femap, Nastran, Abaqus • General understanding of Aerospace practices, policies, and procedures • Detail orientated, self-starter, ability to work both independently and in a team environment • Experience with material allowable database • Leading engineers in structural analysis • Active DoD Secret clearance.
GENERAL ENGINEER-DIRECT HIRE AUTHORITY United States Air ForceGENERAL ENGINEER-DIRECT HIRE AUTHORITYUT$61,722–$116,362 / yearWorking knowledge of quantitative techniques used to analyze all facets of air vehicle flight testing and munitions testing to include on-board instrumentation techniques, data distribution and transmission, range instrumentation, complex data processing and analysis, and electro-mechanical-optical instruments and equipment that senses, detects, converts, modulates, transmits, acquires, demodulates, de-commutates, processes, computes, and displays flight test information. GS-12 Examples of specialized experience: Includes experience at the GS-11 level or equivalent in other pay systems - independently planning, designing, and carrying out the analysis and scheduling for entire data processing systems that support major complex DoD test programs, developing new methodologies, criteria, or policies where existing guidelines are scarce or insufficient, and resolving critical and complex technical problems.
Sentinel Principal/Sr. Principal Structural Engineer - 19107 Northrop Grumman CorpSentinel Principal/Sr. Principal Structural Engineer - 19107Roy, UT$98,400–$147,600 / yearAnalyzes, researches and develops structural engineering specifications involving metals, non-metallic or composite structural materials for product design, or operation of product to include structures, mechanical, hydraulic, electrical and electronics, power plant, armament, heating and ventilating, equipment and maintenance designs. Principal Structural Engineer: 5 years of relevant experience with Bachelors in Science in Engineering or relevant technical field; 3 Years with Masters; 1 Year with PhD or 4 additional years of experience in lieu of degree.
FT - Airport Principal Engineer - Airport Division Ogden City CorporationFT - Airport Principal Engineer - Airport DivisionOgden, UT$88,090.33–$127,730.98 / yearFull timeEmployees will be required to complete NIMS IS100, IS200 ICS300, ICS400, IS700, IS701, IS702, IS703, IS704, IS706, IS775, IS803, and IEMC course(s), position specific ICS courses based on assignment within two years of hire. Must possess the visual ability to see clearly at close (less than 20 inches) distances, identify and distinguish colors, observe an area that can be seen up and down or left and right while eyes are fixed upon a given point, and adjust the eye to bring an object into sharp focus.
Packaging Engineer PEAK Technical StaffingPackaging EngineerOgden, UTQualifications: BS in Packaging Engineering strongly preferred; Mechanical/Industrial acceptable, 3-5 years of related experience, CAD & Packaging: SolidWorks/NX/CATIA; ArtiosCAD for corrugated/dunnage; read drawings, GD&T, basic tolerance stacks. Coordinate with internal teams (engineering, manufacturing, sales, finance, etc.) and our packaging vendors for new and existing projects to find opportunities to reduce cost and improve performance, efficiencies, and safety.
NewSubstation Protection & Control Engineer III Qualus Power Services CorpSubstation Protection & Control Engineer IIIFarmington, UTDevelopment of complete engineering design packages for protective relaying and communications systems, including one-line diagrams, three-line diagrams, AC schematics, DC schematics, logic and functional diagrams, panel layouts, control house layouts, wiring/connection diagrams, interconnection diagrams, relaying equipment specifications and bill of materials. The firm partners with utilities, commercial, industrial, data center, and government clients, and renewable and energy storage developers, offering comprehensive solutions through boutique and integrated advisory, planning, engineering, digital solutions, program management, energy efficiency and specialized field services.
Packaging Lead Engineer PEAK Technical Services Inc.Packaging Lead EngineerOgden, UT$90–$110 / yearExperience integrating packaging data with ERP/PLM/WMS (e.g., SAP/Oracle; Teamcenter/Windchill); strong Excel/BI; familiarity with APIs/MDM concepts. Own enterprise packaging data architecture and tools (spec/PFEP, cartonization, labeling, image vaults): governance, permissions, and data-quality SLAs.
Sentinel Staff Manufacturing Engineer - 17207 Northrop Grumman CorpSentinel Staff Manufacturing Engineer - 17207Roy, UT$139,000–$208,600 / yearThis includes, but is not limited to, working with suppliers to develop a compliant Manufacturing Plan, conducting Manufacturing Readiness Assessment (MRA) events, engineering solutions for the deployment and install of products, Bill of Materials creation, developing work and installation instructions, supporting system design, and tool design. The candidate will demonstrate exceptional organizational and interpersonal skills, be capable of working a variety of tasks in a proactive manner, can task orient, and communicate effectively with varying levels of Government, NGC, and Supplier personnel.
Sentinel Manufacturing Engineer -17211 Northrop Grumman CorpSentinel Manufacturing Engineer -17211Roy, UTThis includes, but is not limited to, working with suppliers to develop a compliant Manufacturing Plan, conducting Manufacturing Readiness Assessment (MRA) events, engineering solutions for the deployment and install of products, Bill of Materials creation, developing work and installation instructions, supporting system design, and tool design. The candidate will demonstrate exceptional organizational and interpersonal skills, be capable of working a variety of tasks in a proactive manner, can task orient, and communicate effectively with varying levels of Government, NGC, and Supplier personnel.
Process Engineer Level 2 Northrop Grumman CorpProcess Engineer Level 2Clearfield, UT$79,300–$118,900 / yearThis role partners closely with design engineering, production, and cross-functional teams to resolve manufacturing issues, optimize safety, quality, cost, and efficiency, and implement corrective actions to improve process performance. The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate''s experience, education, skills and current market conditions.
Sentinel Principal / Sr Principal Manufacturing Engineer - 17495* Northrop Grumman CorpSentinel Principal / Sr Principal Manufacturing Engineer - 17495*Roy, UT$89,400–$134,200 / yearRequired for Both Levels: Must have an Active U.S. Government DoD Secret security clearance at time of application, current and within scope, with an ability to obtain and maintain Special Access Program (SAP) approval within a reasonable period of time, as determined by the company to meet its business need. The candidate will provide advanced technological ideas and Subject Matter Expertise (SME) to resolve technical questions and ensure compliance and execution to the Engineering and Manufacturing Development (EMD) Statement of Work (SOW) requirements.
Sentinel Manufacturing / Principal Manufacturing Engineer - Ability to Obtain Clearance Northrop Grumman CorpSentinel Manufacturing / Principal Manufacturing Engineer - Ability to Obtain ClearanceRoy, UT$72,100–$108,100 / yearRequired for Both Levels: Must have ability to obtain and maintain Active U.S. Government DoD Secret security clearance prior to start, with an ability to obtain and maintain Special Access Program (SAP) approval within a reasonable period of time, as determined by the company to meet its business need. The candidate will provide advanced technological ideas and Subject Matter Expertise (SME) to resolve technical questions and ensure compliance and execution to the Engineering and Manufacturing Development (EMD) Statement of Work (SOW) requirements.
Flight Systems Sr Principal Mechanical Engineer (Secret Clearance) - 19027 Northrop Grumman CorpFlight Systems Sr Principal Mechanical Engineer (Secret Clearance) - 19027Roy, UT$111,700–$167,500 / yearThe Flight Systems Futures team executes the design and development, procurement/manufacturing, and integration & test of novel flight systems across a broad spectrum of applications. The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate''s experience, education, skills and current market conditions.
Sentinel Principal / Sr Principal Manufacturing Engineer -18341* Northrop Grumman CorpSentinel Principal / Sr Principal Manufacturing Engineer -18341*Roy, UT$89,400–$134,200 / yearRequired for Both Levels: Must have an Active U.S. Government DoD Secret security clearance at time of application, current and within scope, with an ability to obtain and maintain Special Access Program (SAP) approval within a reasonable period of time, as determined by the company to meet its business need. The candidate will provide advanced technological ideas and Subject Matter Expertise (SME) to resolve technical questions and ensure compliance and execution to the Engineering and Manufacturing Development (EMD) Statement of Work (SOW) requirements.
Sentinel Manufacturing / Principal Manufacturing Engineer 18196* Northrop Grumman CorpSentinel Manufacturing / Principal Manufacturing Engineer 18196*Roy, UT$72,100–$108,100 / yearRequired for Both Levels: Must have an Active U.S. Government DoD Secret security clearance at time of application, current and within scope, with an ability to obtain and maintain Special Access Program (SAP) approval within a reasonable period of time, as determined by the company to meet its business need. Principal Manufacturing Engineer: Bachelor's degree with a minimum of 5 Years with BS; 3 Years with Masters; 0 Years with PhD; 4 years additional experience may be considered in lieu of a degree.
Sentinel Manufacturing / Principal Manufacturing Engineer 18189* Northrop Grumman CorpSentinel Manufacturing / Principal Manufacturing Engineer 18189*Roy, UT$72,100–$108,100 / yearRequired for Both Levels: Must have an Active U.S. Government DoD Secret security clearance at time of application, current and within scope, with an ability to obtain and maintain Special Access Program (SAP) approval within a reasonable period of time, as determined by the company to meet its business need. Principal Manufacturing Engineer: Bachelor's degree with a minimum of 5 Years with BS; 3 Years with Masters; 0 Years with PhD; 4 years additional experience may be considered in lieu of a degree.
Sentinel Staff Manufacturing Engineer - 17222* Northrop Grumman CorpSentinel Staff Manufacturing Engineer - 17222*Roy, UT$139,000–$208,600 / yearMust have an Active U.S. Government DoD Secret security clearance at time of application, current and within scope, with an ability to obtain and maintain Special Access Program (SAP) approval within a reasonable period of time, as determined by the company to meet its business need. The candidate will provide advanced technological ideas and Subject Matter Expertise (SME) to resolve technical questions and ensure compliance and execution to the Engineering and Manufacturing Development (EMD) Statement of Work (SOW) requirements.
Sentinel Principal Manufacturing Engineer - 17209 Northrop Grumman CorpSentinel Principal Manufacturing Engineer - 17209Roy, UT$89,400–$134,200 / yearMust have an Active U.S. Government DoD Secret security clearance at time of application, current and within scope, with an ability to obtain and maintain Special Access Program (SAP) approval within a reasonable period of time, as determined by the company to meet its business need. The candidate will provide advanced technological ideas and Subject Matter Expertise (SME) to resolve technical questions and ensure compliance and execution to the Engineering and Manufacturing Development (EMD) Statement of Work (SOW) requirements.
Manufacturing Engineer I Karman Holdings IncManufacturing Engineer IOgden, UTHowever, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. To conform to U.S. Government export regulations, certain positions may require applicants to be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Sr. Sentinel Payloads Engineer The Aerospace CorpSr. Sentinel Payloads EngineerUT$166,400–$249,600 / yearThe Defense Systems Group (DSG) provides analysis-based decision support to senior leaders on space architectures, policy and strategy, technology development, warfighter capability enablers, systems integration, defense industrial base, and threat reduction to help shape existing and future space missions across the national security space (NSS) enterprise. DSG is unique at Aerospace as it not only directly supports major customers, including the U.S. Space Force, U.S. Space Command, Air Force Material Command, and senior leadership at the Pentagon, but also provides a broad range of technical support across the national space enterprise, maintaining vertical responsibilities with customers' portfolios as well as horizontal, matrixed responsibilities across the corporation.
Lead Process Engineer Kimberly-Clark CorpLead Process EngineerOgden, UT$87,260–$107,780 / yearProvide technical leadership for sector-wide Overall Equipment Effectiveness improvement initiatives by identifying optimization opportunities, developing and executing action plans, and driving accountability across Baby Child Care assets. For Kimberly-Clark to grow and prosper, we must be an inclusive organization that applies the diverse experiences and passions of its team members to brands that make life better for people all around the world, which is why we seek to build a workforce that encompasses the experiences of our consumers.
NewPackaging Engineer Sterling Engineering, Inc.Packaging EngineerOdgen, UT$100,000–$115,000 / yearThis role is responsible for designing, developing, and optimizing packaging solutions for automotive components, automation cells, and service parts across North and South America. Qualifications : Bachelor's degree in Packaging Engineering strongly preferred; Mechanical or Industrial Engineering degrees will also be considered.
NewPackaging Lead Engineer - Data and Standards Sterling Engineering, Inc.Packaging Lead Engineer - Data and StandardsOgden, UT$120,000–$140,000 / yearCollaborate with engineering, manufacturing, supply chain, quality, and suppliers to improve packaging performance, sustainability, and operational efficiency. Qualifications : Bachelor's degree in Packaging Engineering preferred; Mechanical or Industrial Engineering degrees will also be considered.
Product Development Engineer Easton Technical Products IncProduct Development EngineerSalt Lake City, UTWorking closely with the product development team, this role helps shape the Easton product line while supporting new product development from concept through production. This role includes a mix of office engineering work, manufacturing collaboration, and outdoor product testing, with occasional participation in tournaments, trade shows, and industry events.
Sentinel - Principal/Sr. Principal Structural Engineer - 19113 & 19138 Northrop Grumman CorpSentinel - Principal/Sr. Principal Structural Engineer - 19113 & 19138Roy, UT$98,400–$147,600 / yearWhat You Will Get To Do: Analyzes, researches and develops structural engineering specifications involving metals, non-metallic or composite structural materials for product design, or operation of product to include structures, mechanical, hydraulic, electrical and electronics, power plant, armament, heating and ventilating, equipment and maintenance designs. Principal Structural Engineer: Bachelor's Degree in a STEM (Science, Technology, Engineering or Mathematics) discipline from an accredited university and 8 years of related experience, or a Master's Degree in a STEM discipline and 6 years of related experience, or PhD in a STEM discipline with 4 years of experience.
Senior Engineer - Substation QualusSenior Engineer - SubstationFarmington, UtahFull timeThe firm partners with utilities, commercial, industrial, data center, and government clients, and renewable and energy storage developers, offering comprehensive solutions through boutique and integrated advisory, planning, engineering, digital solutions, program management, energy efficiency and specialized field services. The final salary awarded for this role may vary from the above range based on several factors including, but not limited to, relevant education, qualifications, certifications, experience, skills, seniority, geographic location, performance, and business or organizational needs.
Lead Engineer - Substation QualusLead Engineer - SubstationFarmington, UtahFull timeThe firm partners with utilities, commercial, industrial, data center, and government clients, and renewable and energy storage developers, offering comprehensive solutions through boutique and integrated advisory, planning, engineering, digital solutions, program management, energy efficiency and specialized field services. Qualus also provides software and technology enabled services and develops breakthrough solutions for critical power industry challenges such as distributed and variable resource integration, emergency management, and secure data exchange.
Structural Engineer Bechtel CorpStructural EngineerOgden, UTExtraordinary teams building inspiring projects: Since 1898, we have helped customers complete more than 25,000 projects in 160 countries on all seven continents that have created jobs, grown economies, improved the resiliency of the world''s infrastructure, increased access to energy, resources, and vital services, and made the world a safer, cleaner place. Project Overview: Bechtel is the Engineering, Procurement, and Construction (EPC) partner on the Northrop Grumman team to deliver the Sentinel Program, which is modernizing the ground-based leg of the U.S. nuclear deterrent triad, including intercontinental ballistic missile (ICBM) systems and launch infrastructure.
NewManufacturing Engineer The Kemtah Group, Inc.Manufacturing EngineerOgden, UTJob Title: Manufacturing Engineer II Location: Ogden, UT 84404 Pay: $80,000 - $120,000/yr (DoE - plus annual bonus opportunity) Zip Code: 84404 Start Date: ASAP Job Type: Direct, Full-Time Job Description: Manufacturing Engineer: Our client, a leading aerospace manufacturer, is seeking a Manufacturing Engineer II to join its engineering team in Ogden, Utah. - Hands on experience with one or more of the following manufacturing processes: Machining, Sheet Metal Forming, Welding, Brazing, Heat Treat, Vacuum Furnace Operations, NDT, Laser Processing, EDM - Experience developing manufacturing processes, routers, work instructions, and process documentation.
Packaging Lead Engineer PEAK Technical StaffingPackaging Lead EngineerOgden, UT$90–$110 / yearExperience integrating packaging data with ERP/PLM/WMS (e.g., SAP/Oracle; Teamcenter/Windchill); strong Excel/BI; familiarity with APIs/MDM concepts. Own enterprise packaging data architecture and tools (spec/PFEP, cartonization, labeling, image vaults): governance, permissions, and data-quality SLAs.
Network Engineer Jt4 LLCNetwork EngineerUTA Bachelor of Science in Engineering from an ABET-accredited academic institution and eight (8) years of related engineering experience, or an accredited Master of Science in Engineering and a minimum of six (6) years of related engineering experience, or an accredited doctorate degree in engineering and a minimum four (4) years of related engineering experience are required for this position. Engineer Network Security: Engineer and implement network security baselines, including access control and firewall integration (e.g., Palo Alto, Juniper SRX, Cisco ASA), and architect the network routing infrastructure to support DoD Suite A/B encryption environments.
Principal Electromechanical Engineer Parker Hannifin CorpPrincipal Electromechanical EngineerOgden, UTProvides expert technical information on EMA and Gear Design concerning manufacturing or processing techniques, materials, properties, and process advantages and limitations which affect long range plant and product engineering planning by carefully analyzing and applying advanced engineering and scientific concepts. Conducts analysis and/or tests pertaining to the development of new designs, methods, materials, equipment or processes and completes required documentation by determining required actions, performing or directing completion of tasks and publishing findings and/or results.
Electrical/Principal Electrical Engineer - (16899 - 16900 & 16901) Northrop Grumman CorpElectrical/Principal Electrical Engineer - (16899 - 16900 & 16901)Roy, UT$79,300–$118,900 / yearPrincipal Engineer Electrical: Bachelor's degree in a Science, Technology, Engineering, or Mathematics (STEM) discipline from an accredited university and 5 years of experience, or 2 years of experience with a Master's degree, or 0 years of experience with a PhD. May perform research, trade studies, evaluation, and systems integration in electrical or electro-mechanical systems, cables, connectors, power systems, test equipment, and more.
Electrical/Principal Electrical Engineer - 16883 Northrop Grumman CorpElectrical/Principal Electrical Engineer - 16883Roy, UT$79,300–$118,900 / yearPrincipal Electrical Engineer: Bachelor's degree in a Science, Technology, Engineering, or Mathematics (STEM) discipline from an accredited university and 5 years of experience, or 2 years of experience with a Master's degree, or 0 years of experience with a PhD. May perform research, trade studies, evaluation, and systems integration in electrical or electro-mechanical systems, cables, connectors, power systems, test equipment, and more.