Manufacturing Technician I Fluent CannabisManufacturing Technician ITampa, FLReasonable accommodations may be made to enable individuals with disabilities to perform the essential functions, including but not limited to: Participating individually and in small teams for general manufacturing duties, such as dispensing, packaging, equipment breakdowns, moving products, inventory audits, labeling, sanitation, post-harvest processing, and other general duties around manufacturing as they relate to production. Key Responsibilities: Participating individually and in small teams for general manufacturing duties, such as dispensing, packaging, equipment breakdowns, moving products, inventory audits, labeling, sanitation, post-harvest processing, and other general duties around manufacturing as they relate to production.
Manufacturing Technician Bench 3rd Shift M-F 10pm to 6am (P) Siemens Energy AGManufacturing Technician Bench 3rd Shift M-F 10pm to 6am (P)FLWill perform operations on castings for surface preparation such as blasting, belting, grinding, and benching according to production specifications to produce parts of exceptional quality in the Gibsonton Florida Location. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably.
Manufacturing Technician Bench 2nd Shift M-F 2:00pm- 10pm (P) Siemens Energy AGManufacturing Technician Bench 2nd Shift M-F 2:00pm- 10pm (P)FLWill perform operations on castings for surface preparation such as blasting, belting, grinding, and benching according to production specifications to produce parts of exceptional quality in the Gibsonton Florida Location. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably.
Manufacturing Technician Casting C Shift Wed 12pm to 6pm Thu- Sat 6am-6pm (P) Siemens Energy AGManufacturing Technician Casting C Shift Wed 12pm to 6pm Thu- Sat 6am-6pm (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. Will be operating alloy saw according to production specifications to produce the correct charge weights and to organize incoming alloy and current inventory by type.
Manufacturing Technician Bench 2nd Shift 2pm to 10:00pm (P) Siemens Energy AGManufacturing Technician Bench 2nd Shift 2pm to 10:00pm (P)FLWill perform operations on castings for surface preparation such as blasting, belting, grinding, and benching according to production specifications to produce parts of exceptional quality in the Gibsonton Florida Location. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably.
Manufacturing Technician Casting - D Shift Wed 12am-6am, Thu-Sat 6pm-6am (P) Siemens Energy AGManufacturing Technician Casting - D Shift Wed 12am-6am, Thu-Sat 6pm-6am (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. Will be operating alloy saw according to production specifications to produce the correct charge weights and to organize incoming alloy and current inventory by type.
Manufacturing Technician Wax Ultrasonic 2nd Shift 2pm to 10pm (P) Siemens Energy AGManufacturing Technician Wax Ultrasonic 2nd Shift 2pm to 10pm (P)FLOrganization: Gas Services Business Unit: Central Full / Part time: Full-time Experience Level: Early Professional A Snapshot of Your Day Will be testing wax patterns to ensure dimensional acceptance for mold processing. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably.
Manufacturing Technician I Winnebago Industries IncManufacturing Technician IClearwater, FLAssemblers must be able to understand technical manuals, blueprints, and schematics for a wide range of products and machines to properly manufacture the final product. In the role of Manufacturing Technician you will: Assemble equipment according to procedures & drawing specifications by reading drawings and following instruction.
Technician, Manufacturing Engineering - New Hire Sign on Bonus 12-hour shift 3 day-4-day Work Weeks JABIL CIRCUIT, INCTechnician, Manufacturing Engineering - New Hire Sign on Bonus 12-hour shift 3 day-4-day Work WeeksSt. Petersburg, FLIn this key Manufacturing Engineer Technician onsite role, you will perform preventative maintenance, calibration, change overs in Z-prep area and perform preventive maintenance for tooling (SMT & BE process) and other specialty support equipment used in the manufacturing process. If you’re someone who prefers working nights or wants to maximize earning potential while enjoying a schedule with fewer total days giving you additional full days off during the week to spend with family, pursue hobbies, or rest, this could be a great fit for you.
Manufacturing Technician X-Ray Reader 3rd Shift M-F 10pm to 6am (P) Siemens Energy AGManufacturing Technician X-Ray Reader 3rd Shift M-F 10pm to 6am (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. X-Ray readers retrieve component requirements from work order and special instruction in notes as to the image requirements per component type.
Manufacturing Technician Core Finishing 1st Shift 6am to 2pm (P) Siemens Energy AGManufacturing Technician Core Finishing 1st Shift 6am to 2pm (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. Using diamond bit tools, sandpapers to sand down die lines on the main body of the core and pneumatic air tools to remove tie bars on core.
Manufacturing Technician Kiln A Shift Sun-Tue 6am to 6:00pm Wed 6am to 12pm (P) Siemens Energy AGManufacturing Technician Kiln A Shift Sun-Tue 6am to 6:00pm Wed 6am to 12pm (P)FLOrganization Gas Services Business Unit Central Full / Part time Full-time Experience Level Early Professional A Snapshot of Your Day Will be loading and unloading furnaces with crucibles containing cores. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably.
Manufacturing Technician - Wax Cleaning 2nd Shift 2pm-10pm (P) Siemens Energy AGManufacturing Technician - Wax Cleaning 2nd Shift 2pm-10pm (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. This position will require an export license from the Department of Commerce, Bureau of Industry and Security and/or the Department of State, Directorate of Defense Trade Controls.
Manufacturing Technician Core Finishing 2nd Shift 2pm to 10:00pm (P) Siemens Energy AGManufacturing Technician Core Finishing 2nd Shift 2pm to 10:00pm (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. Using diamond bit tools, sandpapers to sand down die lines on the main body of the core and pneumatic air tools to remove tie bars on core.
Manufacturing Technician FPI Rework 2nd Shift 2:00pm to 10:00pm (P) Siemens Energy AGManufacturing Technician FPI Rework 2nd Shift 2:00pm to 10:00pm (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. Experience with Inspection Equipment (calipers, pin gauges, etc.) using the metric system and able to perform math functions, read/comprehend Engineering instructions, and mechanical attitude.
Manufacturing Technician Core X-Ray 2nd Shift 2pm to 10pm (P) Siemens Energy AGManufacturing Technician Core X-Ray 2nd Shift 2pm to 10pm (P)FLWill work in the Core Department with X-Ray Equipment using process knowledge, basic engineering principles, previous experience, and creativity, to help develop and improve manufacturing processes that result in the production of quality castings. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably.
Manufacturing Technician Bench 1st Shift 6am to 2:00pm (P) Siemens Energy AGManufacturing Technician Bench 1st Shift 6am to 2:00pm (P)FLA Snapshot of Your Day Will perform operations on castings for surface preparation such as blasting, belting, grinding, and benching according to production specifications to produce parts of exceptional quality in the Gibsonton Florida Location. How You'll Make an Impact Setting up and operating benching procedures on castings using basic tools like die grinders, tool belts, buffing wheels, blast cabinets, and auxiliary equipment.
Manufacturing Technician Casting - B Shift Sun-Tue 6pm to 6am Wed 6pm to 12pm (P) Siemens Energy AGManufacturing Technician Casting - B Shift Sun-Tue 6pm to 6am Wed 6pm to 12pm (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. Will be operating alloy saw according to production specifications to produce the correct charge weights and to organize incoming alloy and current inventory by type.
Manufacturing Technician Casting - A Shift Sun-Tue 6am to 6:00pm Wed 6am to 12pm (P) Siemens Energy AGManufacturing Technician Casting - A Shift Sun-Tue 6am to 6:00pm Wed 6am to 12pm (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. Will be operating alloy saw according to production specifications to produce the correct charge weights and to organize incoming alloy and current inventory by type.
Manufacturing Technician Core Blue Light 3rd Shift 10pm to 6am (P) Siemens Energy AGManufacturing Technician Core Blue Light 3rd Shift 10pm to 6am (P)Gibsonton, FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. This position will require an export license from the Department of Commerce, Bureau of Industry and Security and/or the Department of State, Directorate of Defense Trade Controls.
NewManufacturing Technician Shell Dipper Sun-Tue 6am to 6pm Wed 6am to 12pm Siemens Energy AGManufacturing Technician Shell Dipper Sun-Tue 6am to 6pm Wed 6am to 12pmFLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. This position will require an export license from the Department of Commerce, Bureau of Industry and Security, and/or the Department of State, Directorate of Defense Trade Controls.
2nd shift Maintenance Technician, Manufacturing ICP Group2nd shift Maintenance Technician, ManufacturingTampa, FLFull timeMechanical (pneumatic/hydraulic, power transmission, lubrication, seals, joints, fasteners), Electrical (wiring, contactors, relays), and Electronic (sensors, instrumentation, hardware) skills will be utilized to maintain a continuous stream of production through installation, commissioning, removal, troubleshooting and repair of plant equipment. In this role you will be responsible for the following: Conduct, develop and maintain records for installation, removal, and troubleshooting systems (Pumps, Piping, Valves, Pneumatics, Motor Starters, Wiring logic, etc.).
Manufacturing Technician FPI Rework 3rd Shift 10pm to 6am (P) Siemens Energy AGManufacturing Technician FPI Rework 3rd Shift 10pm to 6am (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. Experience with Inspection Equipment (calipers, pin gauges, etc.) using the metric system and able to perform math functions, read/comprehend Engineering instructions, and mechanical attitude.
Manufacturing Technician Finishing FPI Processor 2nd Shift 2pm to 10pm (P) Siemens Energy AGManufacturing Technician Finishing FPI Processor 2nd Shift 2pm to 10pm (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. Achieve and maintain internal certifications per SNT-TC-1A and customer requirements including examination for general method knowledge, specific procedure understanding and practical performance of the method.
Manufacturing Technician Mold Prep 3rd Shift 10pm to 6am (P) Siemens Energy AGManufacturing Technician Mold Prep 3rd Shift 10pm to 6am (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. This position will require an export license from the Department of Commerce, Bureau of Industry and Security and/or the Department of State, Directorate of Defense Trade Controls.
Manufacturing Equipment Technician PGS WorldwideManufacturing Equipment TechnicianOldsmar, FL$26–$35 / hourThis 1st shift role requires strong SMT equipment experience, AOI experience, electronics troubleshooting ability, mechanical aptitude, and at least 10 years of related technical experience. The Manufacturing Equipment Technician will install, maintain, troubleshoot, repair, and improve manufacturing equipment used in circuit card assembly production.
Manufacturing Technician Rough Knock - Out Operator 2nd Shift 2pm to 10:00pm (P) Siemens Energy AGManufacturing Technician Rough Knock - Out Operator 2nd Shift 2pm to 10:00pm (P)FLPerforming basic or specifically defined maintenance operations; cooperating with maintenance technicians and/or external service providers in repair issues and using hand tools, including wrenches, allen wrenches, and screw drivers. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably.
Manufacturing Technician Finish Visual Inspector 3rd Shift 10pm to 6am (P) Siemens Energy AGManufacturing Technician Finish Visual Inspector 3rd Shift 10pm to 6am (P)Gibsonton, FLYour work will also impact society by helping to reduce the cost of fabrication and machining of gas turbine combustion components using our innovative manufacturing processes in the Gibsonton Florida location. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably.
Chiller/HVAC Technician (Manufacturing) JMI ResourceChiller/HVAC Technician (Manufacturing)Hudson, Florida$18–$24This role is ideal for individuals with a strong background in commercial HVAC, refrigeration, or MEP systems who are looking to grow within a specialized manufacturing environment. Preferred Candidate Profile: Early-career to mid-level technicians (ideal for candidates looking to grow).
Quality Technician - Manufacturing & Product Testing Team Horner GroupQuality Technician - Manufacturing & Product TestingSt. Petersburg, FLThe Quality Technician plays a key role in quality assurance activities, including failure analysis, RMA processing, supplier corrective actions, quality reporting, calibration coordination, and repair of rejected or returned units. This position works closely with production, engineering, suppliers, and quality teams to implement corrective and preventive actions and drive continuous improvement of quality processes and procedures.
Senior SMT Manufacturing Equipment Maintenance Technician Nesco Resource, LLCSenior SMT Manufacturing Equipment Maintenance TechnicianOldsmar, FL$26–$35 / hourHigh School diploma, or equivalent experience/combined education, with additional specialized technical training equivalent to a technical Associate degree and/or demonstrated ability to perform assigned technical/para-engineering tasks and 10 Year of experience. This position also performs evaluation, preventative and corrective maintenance, including immediate repairs on a variety of equipment utilized in the CCA production process.
Manufacturing Engineer I Honeywell International IncManufacturing Engineer IPalmetto, FLAs a trusted partner, we provide actionable solutions and innovation through our Aerospace Technologies, Building Automation, Energy and Sustainability Solutions, and Industrial Automation business segments - powered by our Honeywell Forge software - that help make the world smarter, safer and more sustainable. We are a leading software-industrial company committed to introducing state of the art technology solutions to improve efficiency, productivity, sustainability, and safety in high growth businesses in broad-based, attractive industrial end markets.
Manufacturing Technician Rough EDM/CNC D Shift Wed 12am-6am, Thu-Sat 6pm-6am (P) Siemens Energy AGManufacturing Technician Rough EDM/CNC D Shift Wed 12am-6am, Thu-Sat 6pm-6am (P)Gibsonton, FLHow You'll Make an Impact Will verify that the physical parts serial numbers match with the serial numbers on the router, opening work instructions to ensure proper processes, tools, and methods will be used while using lifting devices to move heavy parts when needed. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably.
Manufacturing Technician Rough Heat Treat 3rd Shift M-F 10pm to 6pm (P) Siemens Energy AGManufacturing Technician Rough Heat Treat 3rd Shift M-F 10pm to 6pm (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. Operating equipment and performing some manufacturing operations including but not limited to wax assembly, injection, sandblast, grinding, or knockout to determine the best process and to expedite engineering parts.
Manufacturing Technician Rough Special Process 1st Shift 6am to 2pm (P) Siemens Energy AGManufacturing Technician Rough Special Process 1st Shift 6am to 2pm (P)FLChecks routers to ensure the proper part number and master heat number is on paperwork and all previous operations are signed off will do spot checks on cut-off parts to ensure the accuracy of work inspecting for cracks, heat checks, or other damage. Your work will also impact society by helping to reduce the cost of fabrication and machining of gas turbine combustion components using our innovative manufacturing processes in the Gibsonton Florida Location.
Manufacturing Technician Rough Special Process D Shift Wed 12am-6am, Thu-Sat 6pm-6am (P) Siemens Energy AGManufacturing Technician Rough Special Process D Shift Wed 12am-6am, Thu-Sat 6pm-6am (P)FLChecks routers to ensure the proper part number and master heat number is on paperwork and all previous operations are signed off will do spot checks on cut-off parts to ensure the accuracy of work inspecting for cracks, heat checks, or other damage. Your work will also impact society by helping to reduce the cost of fabrication and machining of gas turbine combustion components using our innovative manufacturing processes in the Gibsonton Florida Location.
Manufacturing Technician Rough Special Process B Shift Sun-Tue 6pm-6am Wed 6pm to 12am (P) Siemens Energy AGManufacturing Technician Rough Special Process B Shift Sun-Tue 6pm-6am Wed 6pm to 12am (P)FLChecks routers to ensure the proper part number and master heat number is on paperwork and all previous operations are signed off will do spot checks on cut-off parts to ensure the accuracy of work inspecting for cracks, heat checks, or other damage. Your work will also impact society by helping to reduce the cost of fabrication and machining of gas turbine combustion components using our innovative manufacturing processes in the Gibsonton Florida Location.
NewManufacturing Technician Rough Incoming 1st Shift 6:00am to 2:00pm (P) Siemens Energy AGManufacturing Technician Rough Incoming 1st Shift 6:00am to 2:00pm (P)FLChecks routers to ensure the proper part number and master heat number is on paperwork and all previous operations are signed off will do spot checks on cut-off parts to ensure the accuracy of work inspecting for cracks, heat checks, or other damage. Your work will also impact society by helping to reduce the cost of fabrication and machining of gas turbine combustion components using our innovative manufacturing processes in the Gibsonton Florida Location.
Additive Manufacturing Technician Cummings Aerospace IncAdditive Manufacturing TechnicianLargo, FLThe Additive Manufacturing Technician is responsible operating, maintaining, and optimizing additive manufacturing (AM) systems to produce precision components, prototypes, and final products. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.
Manufacturing Engineer- Plating Koch IncManufacturing Engineer- PlatingSt. Petersburg, FLManufacturing Engineer- Plating - United States - 187707 - Koch. Koch Engineered Solutions.
Manufacturing Tech Advanced Core Demolding A Shift Sun-Tue 6am to 6:00pm Wed 6am to 12pm (P) Siemens Energy AGManufacturing Tech Advanced Core Demolding A Shift Sun-Tue 6am to 6:00pm Wed 6am to 12pm (P)FLThis role contains tasks that can include liner cleaning and preparation, liner block assembly and transfer to ovens, operation of molding block vibration/vacuum chambers and operation of induction slurry heating and mixing equipment. Process the assembly blocks, or parts for inputs to the blocks according to engineering specifications, assemble, manipulate, and transfer shell blocks to multiple unit operations throughout the process flow.
Manufacturing Tech Advanced Core Injection B Shift Sun-Tue 6pm to 6am Wed 6pm to 12pm (P) Siemens Energy AGManufacturing Tech Advanced Core Injection B Shift Sun-Tue 6pm to 6am Wed 6pm to 12pm (P)FLThis role works with cleaning and preparation, liner block assembly, and transfer to ovens, operation of molding block vibration/vacuum chambers, and operation of induction slurry heating and mixing equipment. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably.
Manufacturing Engineer 3 AEVEXManufacturing Engineer 3Tampa, FLThe company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses.
Manufacturing Engineer 3 AevexManufacturing Engineer 3Tampa, FloridaThe company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses.
Manufacturing Engineer II StratAcuity Staffing Partners IncManufacturing Engineer IIRiverview, FL$41–$45 / hourIn terms of professional development, Everforth Apex hosts an on-demand training program, provides access to certification prep and a library of technical and leadership courses/books/seminars once you have 6+ months of tenure, and certification discounts and other perks to associations that include CompTIA and IIBA. Everforth Apex also offers a HSA (Health Savings Account on the HDHP plan), a SupportLinc Employee Assistance Program (EAP) with up to 8 free counseling sessions, a corporate discount savings program and other discounts.
Manufacturing Core Visual Inspector 2nd Shift 2:00pm to 10:00pm (P) Siemens Energy AGManufacturing Core Visual Inspector 2nd Shift 2:00pm to 10:00pm (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. Proficiency in the English language (reading, writing, speaking).Applicants must be legally authorized for employment in the United States without the need for current or future employer-sponsored work authorization.
Senior Manufacturing Engineer Nordson CorpSenior Manufacturing EngineerSt. Petersburg, FLEducation and Experience Education: Bachelor's Degree in Mechanical Engineering, Manufacturing Engineering, Electrical Engineering, Industrial or equivalent 8+ years of experience, preferably in a medical device or other FDA regulated industries Proficient in CAD software (e.g., AutoCAD, SolidWorks) and ERP systems. Job Summary: The Senior Manufacturing Engineer is responsible for providing support to manufacturing and technical operations while maintaining a strong focus on continuous improvement and productivity optimization.
Sr. Manufacturing Engineer AEVEXSr. Manufacturing EngineerTampa, FLThe company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses.
Sr. Manufacturing Engineer AevexSr. Manufacturing EngineerTampa, FloridaThe company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses.
Inside/Outside Sales Representative – Lift Station Manufacturing US Water Services CorporationInside/Outside Sales Representative – Lift Station ManufacturingTampa, FLFull timeU.S. Water Services Corporation, a well-established and diverse water and wastewater utility operations, maintenance, engineering, and construction services corporation, has an opening for a full-time Electric Motor Repair Technician in Bradenton, FL. Targeted Sales: Leverage your industry knowledge to drive lift station sales, consulting with municipal and private contractors on technical specifications and pump system requirements.