Manufacturing Engineer - MRO - Orlando, FL Michael Page USAManufacturing Engineer - MRO - Orlando, FLOrlando, FL$80,000–$95,000 / yearFull timeThe Manufacturing Engineer (MRO) is responsible for improving maintenance, repair, and overhaul processes to ensure efficiency, quality, and turnaround time for complex aerospace and industrial components. This role reports directly into the Manufacturing Engineering Manager and is responsible for: Developing and optimizing MRO processes to improve efficiency and reduce cycle times.
NewMechanical Engineering Technician ComTec Information SystemsMechanical Engineering TechnicianOrlando, FL$40–$45 / hourContractorPreparation of technical specifications, verification of supplier bids with clarifications, technical supplier negotiations including risk assessment and commercial selection support for- Air Intake system, Air-Cooled Heat Exchangers, Noise Enclosures, and Fire Protection system. Coordination with Lead Engineer, Customer, Procurement, Suppliers, other Engineering departments, and Project Management.
NewAircraft Interiors Technicians STS Technical ServicesAircraft Interiors TechniciansMelbourne, FLRequiring Basic Skills to perform basic tasks within the Technical Area assigned to in area of responsibility with assembly, mechanical, electrical or aircraft structures as well as able to use all tech data and aircraft drawings to locate part numbers and accomplish repairs. Duties & Responsibilities: Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on interior assemblies and subassemblies such as seats, cabinets, panels, partitions, divan, and In-flight entertainment equipment.
NewAircraft Assembly Technicians STS Technical ServicesAircraft Assembly TechniciansMelbourne, FLPerform repetitive and non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables. From working hands-on with jigs and blueprints to inspecting finished work for FAA compliance, you’ll be part of a team that keeps production precise, efficient, and airworthy.
NewCAD Technician JobotCAD TechnicianDebary, FL$30–$42 / hourInformation collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. Our commitment to excellence, positive attitude, and extensive experience set us apart as a leading provider of surveying, mapping, and geospatial services in Florida and the Southern U.S. Join us and be part of a dynamic team shaping the future of our industry.
NewCivil3D CAD technician JobotCivil3D CAD technicianWinter Garden, FL$32–$40 / hourInformation collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. Our commitment to excellence, positive attitude, and extensive experience set us apart as a leading provider of surveying, mapping, and geospatial services in Florida and the Southern U.S. Join us and be part of a dynamic team shaping the future of our industry.
NewGSE Technician STS Technical ServicesGSE TechnicianMelbourne, FLTechnical Skills: Proficiency with hand tools and pneumatic tools, strong problem-solving skills, and a high level of technical aptitude in plant production equipment maintenance. Conduct regular inspections of drives, motors, belts, and fluid levels; replace filters and complete maintenance tasks according to checklists.
NewCNC Set-Up Technician JobotCNC Set-Up TechnicianDaytona Beach, FL$72,000–$85,000 / yearInformation collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. We provide turnkey production solutions that start with design assistance and continue with prototyping, CNC milling & turning, finishing, phosphating, anodizing, laser etching, assembly, inspection, and packaging.
NewA&P Technicians STS Technical ServicesA&P TechniciansMelbourne, FLThis position is ideal for licensed A&P Technicians with experience in general aviation, small aircraft maintenance, depot-level repair, and aircraft mechanical systems including hydraulics, pneumatics, plumbing, rigging, controls, fuel systems, oil systems, and related components. The A&P Technician examines, repairs, assembles, and tests aircraft accessories and components such as engines, power brake units, auxiliary electric motors, carburetors, spark igniters, valves, pumps, fuselage sections, wings, oil tanks, and fuel tanks.
NewA&P Technician STS Technical ServicesA&P TechnicianFort Lauderdale, FLThe A&P Technician is responsible for performing inspections, troubleshooting, repairs, and overhaul services in accordance with FAA regulations and OEM technical data. This role supports a commercial MRO operation performing comprehensive maintenance, repair, and overhaul services on commercial aircraft and components.
Diesel Technician JobotDiesel TechnicianSanford, FL$28–$32 / hourInformation collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. Recognized as one of the fastest-growing companies in the country, we are a leading provider of industrial vacuum truck rentals, supporting customers across construction, environmental services, and manufacturing.
NewAvionics Technician STS Technical ServicesAvionics TechnicianFort Lauderdale, FLThis role supports a commercial MRO environment by performing maintenance, troubleshooting, installation, and testing of aircraft avionics and electrical systems in accordance with FCC, FAA, and company regulations. STS Technical Services is a Top 100 Staffing Firm supporting aviation, aerospace, manufacturing, and defense operations nationwide.
Senior IT Technician Butler America AerospaceSenior IT TechnicianPalm Bay, FL$31–$36 / hourFull timeThis is not a narrow role - you will regularly move between end-user support, server support, network troubleshooting, printer repairs, SCIF PC support, data spill cleanup, and help with new office buildouts. You will be one of the primary on-site resources responsible for keeping desktops, servers, networks, manufacturing tools, conference rooms, and everything in between running smoothly in a fast-paced industrial setting.
NewTechnician Butler America AerospaceTechnicianWindermere, FL$25–$32 / hourFull timeThe overall primary job responsibility is the fabrication and evaluation of aerospace-grade materials, prototype parts and assemblies, and production parts and assemblies in support of internal customers for research and development projects and contracted programs. * Proficient (5+ years experience) in computing within a Windows-based MS Office-suite centered environment for communication, scheduling, data processing, and basic data transfer.
Technician (SMT Install Maintain Repair) Butler America AerospaceTechnician (SMT Install Maintain Repair)Oldsmar, FL$23–$35 / hourFull timeHigh School diploma, or equivalent experience/combined education, with additional specialized technical training equivalent to a technical Associate degree and/or demonstrated ability to perform assigned technical/para-engineering tasks and 10 Year of experience. This position also performs evaluation, preventative and corrective maintenance, including immediate repairs on a variety of equipment utilized in the CCA - Circuit Board Assembly production process.
Systems Engineer Technician (SET) – WARPATH Training Specialist DCS CorporationSystems Engineer Technician (SET) – WARPATH Training SpecialistNiceville, FLThe Workflow Application for Recording Production and Targeting History (WARPATH) Systems Engineer Technician (SET) for training is a vital role responsible for ensuring all users are proficient in leveraging WARPATH to its full potential. Familiarization and experience with target list management functions throughout the Joint Targeting Cycle with emphasis on Post Advanced Target Development (ATD) and Joint Prioritized Target Lists (JPTL).
Inspection Technician Butler America AerospaceInspection TechnicianDoral, FL$24–$27 / hourFull timecitizen, permanent resident/green card, refugee or asylee) or eligible to obtain necessary export authorizations required. Use proper inspection methods & equipment (inspection hand tools, caliper, height gage, micrometer, surface plate, etc.).
Electronics Technician PlanIT GroupElectronics TechnicianOldsmar, FL$22–$35 / hourShift hours are Mon-Thurs 5 AM-3:30 PM EST***** Rate Card Class: Electronics Technician - Electronics Technician Region: Oldsmar, FL Level: Level 2: BS+4-8 YRS or MS+2-6 YRS Pay Rate: $22.00 - $35.00 Hourly OT40 Skills: Category Name Required Importance Experience Area of Expertise MIL-STD-167-1A (Vibration) No 3 Areas of Expertise Electrical Troubleshooting Yes 9 Areas of Expertise Thermal No 3 Soft Skills Troubleshooting Yes 9 Technical Skills Basic Computer Skills Yes 9 Technical Skills Electronics circuit card troubleshooting and testing Yes 9 Technical Skills Electronics troubleshooting Yes 9 Work Schedule: 4/10-2nd Shift Security Clearance: None Security Clearance Comments: Time Charging System: Auto Time Opportunity for FTE Hire: Yes OT Status: non-Exempt Worksite Classification: Worker will work Onsite Full Time Typical Minimums: High School diploma, or equivalent experience/combined education, with additional specialized technical training equivalent to a technical Associate degree and/or demonstrated ability to perform assigned technical/para-engineering tasks and 1 Year of experience.
NewTechnician PlanIT GroupTechnicianOldsmar, FLTypical Minimums: High School diploma, or equivalent experience/combined education, with additional specialized technical training equivalent to a technical Associate degree and/or demonstrated ability to perform assigned technical/para-engineering tasks and 10 Year of experience. This position also performs evaluation, preventative and corrective maintenance, including immediate repairs on a variety of equipment utilized in the CCA production process.
Toyota Master Technician Anderson Automotive GroupToyota Master TechnicianCape Coral, FLFull timeStability: Even through these uncertain times, Anderson Automotive Group was able to continue to provide excellence in our communities. Job Description Fred Anderson Toyota of Cape Coral is looking for Experienced Automotive Technicians .
Hand Soldering Technician Butler America AerospaceHand Soldering TechnicianOldsmar, FL$18–$24 / hourContractorSoldering Operations: - Perform hand soldering, de-soldering, and rework on printed circuit boards (PCBs), wire harnesses, and mechanical assemblies using soldering irons, hot-air tools, and precision hand tools. The role involves precision hand soldering and component level repair on electronic and electromechanical assemblies, ensuring adherence to stringent quality, safety, and documentation requirements.
NewEngineering Technician ( Palm Bay, FL ) 37225 TalentPro ConsultingEngineering Technician ( Palm Bay, FL ) 37225Palm Bay, FLWhile photonics experience is a plus, it's not required, we provide comprehensive on-the-job training to help technicians from other technical disciplines learn photonics-specific skills, including fiber optics handling, optical alignment techniques, and specialized testing procedures. • Execute fabrication, assembly, integration, test, or inspection processes in accordance with detailed work instructions and drawings, such as: Optical Fiber Splicing and Recoating, Fabrication, assembly, and inspection of photonic circuits, Mechanical Builds and Assemblies, Metal Soldering, Microscopy and Profilometry.
NewCompressor Blade Technician System OneCompressor Blade TechnicianPine Hills, FLAssociate degree from a two-year college or technical school preferred; or minimum one year of related compressor blade repair, blending, inspection, or NDT experience; or equivalent combination of education and experience. Utilize precision measuring instruments and advanced inspection equipment to ensure structural integrity, dimensional compliance, and surface finish requirements of compressor blades and related components.
Field Technician - Construction / Post-Tension Keller North America, Inc.Field Technician - Construction / Post-TensionPompano, FL$19–$25 / hourActual salary will be based on a variety of factors including relevant internal and external experience, knowledge, skills, scope of job, geographical location or other factors permitted by law . Recognizes major risks and takes appropriate measures to reduce risk & assists in identifying changes that need to be escalated.
NewMechanical Engineering Technician III # 26-17946 US Tech Solutions, Inc.Mechanical Engineering Technician III # 26-17946Orlando, FLPreparation of technical specifications, verification of supplier bids with clarifications, technical supplier negotiations including risk assessment and commercial selection support for- Air Intake system, Air-Cooled Heat Exchangers, Noise Enclosures, and Fire Protection system. US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions.
Maintenance Technician, Nightshift RefrescoMaintenance Technician, NightshiftLakeland, FL$32–$36Adhere to all health and safety policies/procedures, Good Manufacturing Practices (GMPs) and wear the required personal protective equipment (PPE) while in the warehouse or production areas (including but not limited to hairnets/beard nets, safety glasses, hearing protection, hard toe and slip/oil resistant shoes, appropriate safety gloves, and seatbelts while operating forklifts). Employment agencies that have agreements with Refresco Beverages US, Inc., and have been engaged in a search shall submit a résumé to the designated Refresco recruiter or, upon authorization, submit a résumé to this career site to be eligible for placement fees.
CAD Technician Keller North America, Inc.CAD TechnicianMiami, FL$42,000–$65,000 / yearBy connecting global resources and local experience, Keller develops innovative, practical, and cost-effective solutions to geotechnical challenges. Actual salary will be based on a variety of factors including relevant internal and external experience, knowledge, skills, scope of job, geographical location or other factors permitted by law .
Maintenance Technician, 3rd Shift RefrescoMaintenance Technician, 3rd ShiftTampa, FLAdhere to all health and safety policies/procedures, Good Manufacturing Practices (GMPs) and wear the required personal protective equipment (PPE) while in the warehouse or production areas (including but not limited to hairnets/beard nets, safety glasses, hearing protection, hard toe and slip/oil resistant shoes, appropriate safety gloves, and seatbelts while operating forklifts). Use innovative thinking when troubleshooting equipment in order to minimize production downtime, assure food safety, product quality and personnel safety.
Manufacturing Technician I Fluent CannabisManufacturing Technician ITampa, FLReasonable accommodations may be made to enable individuals with disabilities to perform the essential functions, including but not limited to: Participating individually and in small teams for general manufacturing duties, such as dispensing, packaging, equipment breakdowns, moving products, inventory audits, labeling, sanitation, post-harvest processing, and other general duties around manufacturing as they relate to production. Key Responsibilities: Participating individually and in small teams for general manufacturing duties, such as dispensing, packaging, equipment breakdowns, moving products, inventory audits, labeling, sanitation, post-harvest processing, and other general duties around manufacturing as they relate to production.
Manufacturing Technician Bench 3rd Shift M-F 10pm to 6am (P) Siemens Energy AGManufacturing Technician Bench 3rd Shift M-F 10pm to 6am (P)FLWill perform operations on castings for surface preparation such as blasting, belting, grinding, and benching according to production specifications to produce parts of exceptional quality in the Gibsonton Florida Location. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably.
Manufacturing Technician Casting C Shift Wed 12pm to 6pm Thu- Sat 6am-6pm (P) Siemens Energy AGManufacturing Technician Casting C Shift Wed 12pm to 6pm Thu- Sat 6am-6pm (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. Will be operating alloy saw according to production specifications to produce the correct charge weights and to organize incoming alloy and current inventory by type.
Manufacturing Technician Bench 2nd Shift 2pm to 10:00pm (P) Siemens Energy AGManufacturing Technician Bench 2nd Shift 2pm to 10:00pm (P)FLWill perform operations on castings for surface preparation such as blasting, belting, grinding, and benching according to production specifications to produce parts of exceptional quality in the Gibsonton Florida Location. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably.
Manufacturing Technician Casting - D Shift Wed 12am-6am, Thu-Sat 6pm-6am (P) Siemens Energy AGManufacturing Technician Casting - D Shift Wed 12am-6am, Thu-Sat 6pm-6am (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. Will be operating alloy saw according to production specifications to produce the correct charge weights and to organize incoming alloy and current inventory by type.
Manufacturing Technician Bench 2nd Shift M-F 2:00pm- 10pm (P) Siemens Energy AGManufacturing Technician Bench 2nd Shift M-F 2:00pm- 10pm (P)FLWill perform operations on castings for surface preparation such as blasting, belting, grinding, and benching according to production specifications to produce parts of exceptional quality in the Gibsonton Florida Location. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably.
Manufacturing Technician - Plastics The Weir Group PlcManufacturing Technician - PlasticsFLBuilding on Weir's commitment to engineering excellence and customer partnership, Townley develops and applies specialized elastomers, polyurethanes, rubber compounds, and proprietary alloys to extend asset life and improve operational performance. Townley, part of Weir, is a proven industry leader in delivering advanced wear solutions for abrasion and corrosion challenges across dredging, mining, and power generation.
Manufacturing Technician - Plastics WeirManufacturing Technician - PlasticsFloridaBuilding on Weir’s commitment to engineering excellence and customer partnership, Townley develops and applies specialized elastomers, polyurethanes, rubber compounds, and proprietary alloys to extend asset life and improve operational performance. Townley, part of Weir, is a proven industry leader in delivering advanced wear solutions for abrasion and corrosion challenges across dredging, mining, and power generation.
Manufacturing Sanitation Technician Lingo StaffingManufacturing Sanitation TechnicianOrlando, FLThe ideal candidate has experience in industrial or manufacturing sanitation, is mechanically inclined, and takes pride in maintaining a clean, safe, and efficient work environment. This is a great opportunity for someone with food manufacturing, pharmaceutical, dietary supplement, cosmetics, or industrial cleaning experience looking for a stable, long-term career.
Manufacturing Methods Technician Level II TuuciManufacturing Methods Technician Level IIHialeah, FloridaThe Manufacturing Methods Technician – Level II is an experienced, self-directed member of the Manufacturing Methods team responsible for leading hands-on workstation builds, tooling fixture setup, and production process improvement initiatives. Today, Tuuci’s award-winning parasols, luxury indoor-outdoor furniture, cabanas, pergolas, and space-making accessories are experienced around the world and sought by leading professionals in the commercial, hospitality, and residential design communities.
Manufacturing Technician I Winnebago Industries IncManufacturing Technician IClearwater, FLAssemblers must be able to understand technical manuals, blueprints, and schematics for a wide range of products and machines to properly manufacture the final product. In the role of Manufacturing Technician you will: Assemble equipment according to procedures & drawing specifications by reading drawings and following instruction.
Manufacturing Technician Core Finishing 1st Shift 6am to 2pm (P) Siemens Energy AGManufacturing Technician Core Finishing 1st Shift 6am to 2pm (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. Using diamond bit tools, sandpapers to sand down die lines on the main body of the core and pneumatic air tools to remove tie bars on core.
Manufacturing Technician - Wax Cleaning 2nd Shift 2pm-10pm (P) Siemens Energy AGManufacturing Technician - Wax Cleaning 2nd Shift 2pm-10pm (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. This position will require an export license from the Department of Commerce, Bureau of Industry and Security and/or the Department of State, Directorate of Defense Trade Controls.
Manufacturing Technician Kiln A Shift Sun-Tue 6am to 6:00pm Wed 6am to 12pm (P) Siemens Energy AGManufacturing Technician Kiln A Shift Sun-Tue 6am to 6:00pm Wed 6am to 12pm (P)FLOrganization Gas Services Business Unit Central Full / Part time Full-time Experience Level Early Professional A Snapshot of Your Day Will be loading and unloading furnaces with crucibles containing cores. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably.
Manufacturing Technician X-Ray Reader 3rd Shift M-F 10pm to 6am (P) Siemens Energy AGManufacturing Technician X-Ray Reader 3rd Shift M-F 10pm to 6am (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. X-Ray readers retrieve component requirements from work order and special instruction in notes as to the image requirements per component type.
Manufacturing Technician FPI Rework 2nd Shift 2:00pm to 10:00pm (P) Siemens Energy AGManufacturing Technician FPI Rework 2nd Shift 2:00pm to 10:00pm (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. Experience with Inspection Equipment (calipers, pin gauges, etc.) using the metric system and able to perform math functions, read/comprehend Engineering instructions, and mechanical attitude.
Manufacturing Technician Core Finishing 2nd Shift 2pm to 10:00pm (P) Siemens Energy AGManufacturing Technician Core Finishing 2nd Shift 2pm to 10:00pm (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. Using diamond bit tools, sandpapers to sand down die lines on the main body of the core and pneumatic air tools to remove tie bars on core.
Technician, Manufacturing Engineering - New Hire Sign on Bonus 12-hour shift 3 day-4-day Work Weeks JABIL CIRCUIT, INCTechnician, Manufacturing Engineering - New Hire Sign on Bonus 12-hour shift 3 day-4-day Work WeeksSt. Petersburg, FLIn this key Manufacturing Engineer Technician onsite role, you will perform preventative maintenance, calibration, change overs in Z-prep area and perform preventive maintenance for tooling (SMT & BE process) and other specialty support equipment used in the manufacturing process. If you’re someone who prefers working nights or wants to maximize earning potential while enjoying a schedule with fewer total days giving you additional full days off during the week to spend with family, pursue hobbies, or rest, this could be a great fit for you.
NewSr Manufacturing Technician - 2nd Shift Cardinal Health IncSr Manufacturing Technician - 2nd ShiftDeland, FL$23.65–$33.35 / hourThe Sr Technician Product Test & Calibration is responsible for providing preventative maintenance as well as technical support to improve the efficiency of the facilities' equipment, minimize the downtime due to equipment failure by, keep records and data bases updated, perform general repairs and installations, and up keeping the buildings and equipment in the plant. Pay at Cardinal Health is determined by multiple factors including, but not limited to, a candidate's geographical location, relevant education, experience and skills and an evaluation of internal pay equity.
Manufacturing Methods Technician Level I TuuciManufacturing Methods Technician Level IHialeah, FloridaThe Manufacturing Methods Technician – Level I is a hands-on member of the Manufacturing Methods team responsible for supporting the setup, construction, and improvement of workstations, fixtures, tooling, and production processes. Today, Tuuci’s award-winning parasols, luxury indoor-outdoor furniture, cabanas, pergolas, and space-making accessories are experienced around the world and sought by leading professionals in the commercial, hospitality, and residential design communities.
Manufacturing Technician Core X-Ray 2nd Shift 2pm to 10pm (P) Siemens Energy AGManufacturing Technician Core X-Ray 2nd Shift 2pm to 10pm (P)FLWill work in the Core Department with X-Ray Equipment using process knowledge, basic engineering principles, previous experience, and creativity, to help develop and improve manufacturing processes that result in the production of quality castings. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably.