CAD/CAE Engineer ComriseCAD/CAE EngineerRedmond, WA$54–$56.66 / hourTemporaryContractorFull timeJob title: CAD/CAE Engineer Location: Onsite at Redmond, WA Pay range: $54 - $56.66/hr W2 Responsibilities: Supports engineering data quality and PLM readiness by executing CAD data cleanup and alignment activities within CAD and PLM systems. Success in this role depends on strong attention to detail, ability to follow structured processes, and effective collaboration with engineering teams.
CAD/CAE Engineer JouléCAD/CAE EngineerRedmond, WA$54.84 / hourSystem One, and its subsidiaries including Joulé and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. Execute CAD data cleanup and alignment activities within CAD and PLM systems.
NewMechanical Analysis and Methods Engineer (Core) System OneMechanical Analysis and Methods Engineer (Core)Bellevue, WARemote$52–$85 / hourIn this role, you will develop analysis methodologies using finite element methods and hand calculations to predict mechanical behavior of reactor core components and develop software to automate analyses. Support testing for validation of mechanical codes and methods, including test requirements, acceptance criteria, prediction, post-processing, and collaboration with test engineers.
Liquids Cryogenic Hardware Design Engineer III - Lunar Permanence Blue Origin LLCLiquids Cryogenic Hardware Design Engineer III - Lunar PermanenceSeattle, WAFull timeand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. ITAR RequirementsTo conform to U.S. Government commercial space technology export regulations, including the International Traffic in Arms Regulations (ITAR), 8 U.S.C. § 1324b(a)(3), applicants for employment at Blue Origin must be a U.S. citizen or national, lawfully admitted for permanent residence into the U.S. (i.e. current green card holder), or lawfully admitted as a refugee or granted asylum under 8 U.S.C. § 1157-1158.
Fluid Systems Engineer III - Valve Sustainment Blue Origin LLCFluid Systems Engineer III - Valve SustainmentSeattle, WAFull timeand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Design Engineer I/II/Sr. - Mechanical Terex CorporationDesign Engineer I/II/Sr. - MechanicalMoses Lake, WAFull timeThis is a product design role located in Moses Lake, WA for heavy off-road mobile equipment and will be tasked with developing and applying reliable engineering methods, theories and research techniques in the investigation and solution of technical problems. We design and manufacture advanced specialty vehicles-including fire, ambulance, and recreational vehicles-alongside waste collection vehicles, materials processing machinery, mobile elevating work platforms, and equipment for the electric utility industry.
Project Engineer - Full-time Position - $85,000-$110,000 (DOE) Express Employment ProfessionalsProject Engineer - Full-time Position - $85,000-$110,000 (DOE)Mount Vernon, WA$85,000–$110,000 / yearFull timeFour to ten years related experience and/or training in the fields of project management, construction management, engineering, and manufacturing design; or equivalent combination of education, experience and training that provides the required knowledge, skills, and abilities. If you are a motivated self-starter, have excellent communication skills, and are dedicated, collaborative, professional, and results-oriented, we think you might be a great addition to our team and would love to learn more about you.
Senior Structural Project Engineer McMillen Jacobs AssociatesSenior Structural Project EngineerKirkland, WAFull timeDemonstrated experience with water resource infrastructure including fishery related projects, hydropower, dams, water conveyance, storm water networks, heavy grading, water treatment, spillways, and pump stations. The candidate will work in a variety of projects in fields including but not limited to fisheries, fish passage, hydropower, dams, flood control, pump stations, and other civil infrastructure related projects.
Senior Project Engineer - Structural McMillen Jacobs AssociatesSenior Project Engineer - StructuralKirkland, WAFull timeDemonstrated experience with water resource infrastructure including fishery related projects, hydropower, dams, water conveyance, storm water networks, heavy grading, water treatment, spillways, and pump stations. The candidate will work in a variety of projects in fields including but not limited to fisheries, fish passage, hydropower, dams, flood control, pump stations, and other civil infrastructure related projects.
AI Engineer Bucher & Christian Consulting, Inc. dba BCforward (BCF)AI EngineerRedmond, WAFull timeThe ideal candidate will have strong experience in Agentic AI tools, modern programming languages, and game engines and a proven ability to design, implement, and optimize AI solutions that integrate with existing systems. With delivery centers and offices across North America and India, we take pride in building long-term relationships and delivering excellence through innovation, collaboration, and integrity.
Principal Software Engineer IS - Hybrid Providence St. Joseph HealthPrincipal Software Engineer IS - HybridRedmond, WAFull timeProvidence Shared Services is a service line within Providence that provides a variety of functional and system support services for our family of organizations across Alaska, California, Montana, New Mexico, Oregon, Texas and Washington. Together, our 120,000 caregivers (all employees) serve in over 50 hospitals, over 1,000 clinics and a full range of health and social services across Alaska, California, Montana, New Mexico, Oregon, Texas and Washington.
Mechanical Engineer II Blue Origin LLCMechanical Engineer IISeattle, WAFull timeand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. ITAR RequirementsTo conform to U.S. Government commercial space technology export regulations, including the International Traffic in Arms Regulations (ITAR), 8 U.S.C. § 1324b(a)(3), applicants for employment at Blue Origin must be a U.S. citizen or national, lawfully admitted for permanent residence into the U.S. (i.e. current green card holder), or lawfully admitted as a refugee or granted asylum under 8 U.S.C. § 1157-1158.
Principal Mechanical Equipment and Glovebox Design Engineer Enercon services IncPrincipal Mechanical Equipment and Glovebox Design EngineerKennewick, WA$120,000–$185,000 / yearFull timeIn this role, you'll engineer firstofakind (FOAK) mechanical systems-including gloveboxes, hot cells, shielded enclosures, remoteoperated equipment, and custom facility upgrades-helping the DOE and SMR developers solve their most demanding challenges. Join ENERCON Federal Services' Advanced Design and Manufacturing (ADM) team and play a pivotal role in designing advanced specialty equipment that supports some of the nation's most complex nuclear, cleanup, and nextgeneration energy missions.
Sr Engineer - Mech HTD GlobalSr Engineer - MechSpokane Valley, WA$80,168.40–$80,168.41 / yearFull timeApplication of technical principles/techniques from established practices, as well as a functional knowledge/understanding of mechanical engineering processes, techniques, and practices to quickly/accurately perceive the fit, form, function, and manufacturability of design. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job: Performs all work in accordance with safety and workmanship and good housekeeping specifications.
Fluid Systems Design Engineer III: Upper Stage 9x4 Next Gen New Glenn Blue Origin LLCFluid Systems Design Engineer III: Upper Stage 9x4 Next Gen New GlennSeattle, WAFull timeand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. ITAR RequirementsTo conform to U.S. Government commercial space technology export regulations, including the International Traffic in Arms Regulations (ITAR), 8 U.S.C. § 1324b(a)(3), applicants for employment at Blue Origin must be a U.S. citizen or national, lawfully admitted for permanent residence into the U.S. (i.e. current green card holder), or lawfully admitted as a refugee or granted asylum under 8 U.S.C. § 1157-1158.
CATIA Composite Structures Stress/FEA - 1 week Keltia Design IncCATIA Composite Structures Stress/FEA - 1 weekEverett, WAThis specialized training course focuses on FEA techniques applied to I-Beam and C-Channel Composite Structures, widely used in industries such as aerospace, automotive, and energy. CATIA V5 Composites is a specialized Computer-Aided Design software module designed for the advanced design and manufacturing of composite materials and components.
Intro to FEA for Engineers/Designers - 1 week Keltia Design IncIntro to FEA for Engineers/Designers - 1 weekEverett, WAFinite Element Analysis (FEA) is an essential simulation tool used to predict the behavior of components under various conditions such as stress, strain, and thermal effects. Widely applied across industries like aerospace, automotive, and manufacturing, FEA is critical for optimizing designs, ensuring safety, and reducing production costs.
NewCAE-Structural and Dynamics Engineer (GR 31) PACCAR IncCAE-Structural and Dynamics Engineer (GR 31)Mount Vernon, WA$100,100–$156,600 / yearYoull balance technical excellence with project leadership-managing timelines, and cross-functional resources while staying at the forefront of emerging vehicle technologies (electrification, autonomous systems, alternative fuels). You will leverage advanced Finite Element Analysis (FEA) and vehicle dynamics simulation to deliver best-in-class durability, ride quality, handling, and NVH performance.
Civil/Structural Engineer III, Ground System Test Engineering and Development Blue Origin Enterprises LPCivil/Structural Engineer III, Ground System Test Engineering and DevelopmentSeattle, WA$121,023–$169,432.20 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. You will also support integration of engines and test components to test stands through custom tooling and fabricated structural hardware, working closely with mechanical/fluids engineers, CAD designers, construction project managers, and civil contractors to bring test facilities from concept to activation.
Senior Mechanisms Engineer GraviticsSenior Mechanisms EngineerSeattle, WashingtonOversee the complete lifecycle of moving mechanical assemblies, from defining requirements and interfaces through conceptual and detailed design, development, assembly, verification, qualification testing, operation, manufacturing support, and post-flight analysis. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
Mechanical Engineer Digital Control Inc.Mechanical EngineerKent, WA$110,600–$129,600We also like to eat at DCI and find any excuse to celebrate the most random holidays (Pi Day, Chocolate Ice Cream Day, etc.) We have monthly catered lunches, a fully stocked snack area, sporting tickets, wellness competitions, and most importantly a team of people who will tell you that DCI is the best place they've ever worked. Since the introduction of this revolutionary technology 30 years ago, Digital Control has been at the forefront of trenchless technologies that enable the efficient installation of underground utilities such as fiber optic, telecom, gas, and water lines world-wide.
Digital Twin Principal Engineer, Lead TerraPower LLCDigital Twin Principal Engineer, LeadBellevue, WA$169,922–$235,464 / yearTerraPower is seeking to hire highly motivated and forward-thinking professionals who are interested in focusing on advanced nuclear reactor research and development and influencing change within the nuclear power landscape and bringing forward the critical production of medical isotopes. The role requires deep technical expertise, strong systems thinking, and the ability to guide both internal teams and external partners in developing validated, scalable digital solutions for advanced nuclear systems.
Sr. Hydro Mechanical Engineer ENTRUST Solutions GroupSr. Hydro Mechanical EngineerSeattle, WA$120,000–$165,000 / yearOur approach blends freedom with shared accountability, making ENTRUST an exciting and supportive environment for professionals who thrive in remote work settings with clear, respectful expectations.** **Why Join Us?** At ENTRUST Solutions Group, we are a community of over 3,000 dedicated professionals committed to our clients and each other. As an ENR Top 100 company, we provide comprehensive engineering, consulting, and automation services to various industries, including gas and electric utilities, telecommunication service providers, pipeline operators, and industrial companies.
NewPrincipal Mechanical Equipment and Glovebox Design Engineer Enercon Services IncPrincipal Mechanical Equipment and Glovebox Design EngineerKennewick, WA$120,000–$185,000 / yearIn this role, you'll engineer first‑of‑a‑kind (FOAK) mechanical systems-including gloveboxes, hot cells, shielded enclosures, remote‑operated equipment, and custom facility upgrades-helping the DOE and SMR developers solve their most demanding challenges. Join ENERCON Federal Services' Advanced Design and Manufacturing (ADM) team and play a pivotal role in designing advanced specialty equipment that supports some of the nation's most complex nuclear, cleanup, and next‑generation energy missions.
Lead EPC Substation Project Engineer Leidos Holdings IncLead EPC Substation Project EngineerSeattle, WA$107,900–$195,050 / yearAs a Lead EPC Substation Project Engineer, you can expect to: Act as the project technical lead for high voltage substation designs focused on projects utilizing EPC or other progressive contract vehicles that collaborate with construction. These consulting services provide clients with overall project management tasks in the areas of comprehensive engineering design of electrical transmission and distribution, substation and transmission line projects nationwide.
Senior Mechanical Engineer Rice Lake Weighing Systems IncSenior Mechanical EngineerKent, WAThis role places a strong emphasis on strain gage-based load cell transducer design and development, including mechanical design for optimized strain distribution, signal sensitivity, and long-term stability. This role also requires working knowledge of the electrical aspects of load cell systems, including strain gage signal behavior, Wheatstone bridge circuits, signal normalization, and integration with instrumentation and control systems.
Sr. Mechanical Design Engineer Everest Consultants, Inc.Sr. Mechanical Design EngineerSeattle, WAPerform paper-studies using various mechanical engineering academic principles, such as force and energy balances, structural calculations, mechanical vibration, tolerance analysis, mechanical power transmission, etc. Experience with mechatronics and electro-mechanical systems including stepper and DC motors, solenoids, gear and belt drive systems, linear actuators, bearings, sensors, and electronics.
Senior Mechanical Engineer Rice Lake Weighing SystemsSenior Mechanical EngineerKent, WashingtonThis role places a strong emphasis on strain gage-based load cell transducer design and development, including mechanical design for optimized strain distribution, signal sensitivity, and long-term stability. This role also requires working knowledge of the electrical aspects of load cell systems, including strain gage signal behavior, Wheatstone bridge circuits, signal normalization, and integration with instrumentation and control systems.
Relocate to Australia: Associate Director - Structural Engineer (NSQEP) AECOMRelocate to Australia: Associate Director - Structural Engineer (NSQEP)Bremerton, WATogether with our clients, we are working to evolve and elevate the built environment across sectors including social infrastructure, transit, technology and logistics, and commercial and corporate real estate, while focusing on solutions that promote long term health and wellbeing for all. You will help us foster a culture of equity, diversity and inclusion - a safe and respectful workplace, where we invite everyone to bring their whole selves to work using their unique talents, backgrounds and expertise to create transformational outcomes for our clients.
Mechanical Development Test Engineer - Satellites Starlink Space Exploration Technologies CorpMechanical Development Test Engineer - Satellites StarlinkRedmond, WA$100,000–$115,000 / yearITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.
Sr. Mechanical Engineer, Satellites - Starlink Space Exploration Technologies CorpSr. Mechanical Engineer, Satellites - StarlinkRedmond, WA$130,000–$180,000 / yearEstablish an efficient product lifecycle starting in the supply chain all the way through final integration that balances cost, complexity, and quality; work closely with partner teams to design and realize an efficient in-house production line. As a mechanical design engineer within the satellite vehicle engineering organization you will get to solve complex structural, thermal, and electromechanical problems on the various space grade hardware that make our satellites come to life.
Electric Propulsion Engineer, Mechanical - Starlink Space Exploration Technologies CorpElectric Propulsion Engineer, Mechanical - StarlinkRedmond, WA$100,000–$120,000 / yearEstablish an efficient product lifecycle starting in the supply chain all the way through final integration that balances cost, complexity, and quality; work closely with partner teams to design and realize an efficient in-house production line. You will get to oversee a critical system at the heart of the satellite, as you work cross-functionally with plasma physics experts, avionics engineers, and electrical engineers to develop propulsion hardware (thrusters, cathodes, regulators, and the fluid feed system).
New Graduate Engineer, Mechanical Starlink Space Exploration Technologies CorpNew Graduate Engineer, Mechanical StarlinkRedmond, WA$100,000–$115,000 / yearEstablish an efficient product lifecycle starting in the supply chain all the way through final integration that balances cost, complexity, and quality; work closely with partner teams to design and realize an efficient in-house production line. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Mechanical Engineer, Satellite Bus Starlink Space Exploration Technologies CorpMechanical Engineer, Satellite Bus StarlinkRedmond, WA$100,000–$115,000 / yearEstablish an efficient product lifecycle starting in the supply chain all the way through final integration that balances cost, complexity, and quality; work closely with partner teams to design and realize an efficient in-house production line. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Battery Test Engineer, Satellites Starlink Space Exploration Technologies CorpBattery Test Engineer, Satellites StarlinkRedmond, WA$100,000–$115,000 / yearThis individual is ultimately responsible for the outcome of Starlink batteries and must define overall test campaigns necessary to assess the performance of new cell technologies across our operational conditions and determine whether the fully assembled pack will function reliably, and safely, in-orbit for the life of the satellite. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Mechanical Engineer, Satellites Starlink Space Exploration Technologies CorpMechanical Engineer, Satellites StarlinkRedmond, WA$100,000–$117,500 / yearEstablish an efficient product lifecycle starting in the supply chain all the way through final integration that balances cost, complexity, and quality; work closely with partner teams to design and realize an efficient in-house production line. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Mechanical Engineer, Optical & Space Lasers Manufacturing Starlink Space Exploration Technologies CorpMechanical Engineer, Optical & Space Lasers Manufacturing StarlinkRedmond, WA$100,000–$117,500 / yearITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. This team is frequently asked to tackle new, inter-departmental development projects and the ultimate goal is to deliver the optical assemblies required for our satellites to achieve their mission.
Mechanical Engineer - ASME Zap EnergyMechanical Engineer - ASMEEverett, WashingtonTechnical Experience: At least 8 years of experience in engineering and delivery of complex systems, including nuclear reactors, flight vehicles, and industrial plants. Education: Bachelor’s degree in Mechanical Engineering, Aerospace Engineering, Nuclear Engineering or related field from an ABET-accredited program is required.
Structural Analysis Engineer AAA USAStructural Analysis EngineerRenton, Washington$70–$75About AAA USA: AAA USA is an in-situ manufacturing company that offers specialized subcontracting and technical assistance services related to industrialization, production and supplier monitoring processes in the Aerospace and Transportation sector. Supported by the international expertise of the AAA Group, we offer our customers the benefit of a proven approach to deliver a high-quality finished product.
Senior Structural Engineer - Ports and Maritime JacobsSenior Structural Engineer - Ports and MaritimeBellevue, WAWe will provide an environment with Subject Matter Experts to provide QA/QC on your tasks, and will look to you to lead efforts with a small team of staff engineers, or draw from our deep bench of global talent to staff your tasks and lead efforts on cutting edge waterfront developments. We are looking for a candidate that is a self-starter and proficient in structural engineering, with the ability to self-manage their efforts through the full life cycle of a project, from concept to a finished PS&E set, and have a level of familiarity with both Bid Support and Construction Administration.
Sr. Design Engineer, Structural/Mechanical GSE Blue Origin Enterprises LPSr. Design Engineer, Structural/Mechanical GSESouthgate, WA$145,188–$203,263.20 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. The hardware presents real structural challenges: non-obvious load paths, tight integration interfaces, code-driven sizing (ASME B30.20/BTH-1, AISC-360, ASCE-7, Aluminum Design Manual), welded steel and aluminum structures, and energized subsystems where structural integrity is safety-critical.
NewCivil/Structural Engineer III, Ground System Test Engineering and Development Blue OriginCivil/Structural Engineer III, Ground System Test Engineering and DevelopmentSeattle, WA$121,023–$169,432.20 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. You will also support integration of engines and test components to test stands through custom tooling and fabricated structural hardware, working closely with mechanical/fluids engineers, CAD designers, construction project managers, and civil contractors to bring test facilities from concept to activation.
Water/Wastewater Project Engineer ArdurraWater/Wastewater Project EngineerSpokane, WashingtonWe have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Guided by our core values—Client Driven, Uniquely Nimble, Low Bureaucracy, Team Collaboration, Unlimited Opportunities, Relationship Focused, and Entrepreneurial Spirit—we foster a culture that puts people first.
Associate Mechanical Engineer Schweitzer Engineering Laboratories IncAssociate Mechanical EngineerPullman, WA$84,000–$124,000 / yearEnjoy the smaller town life: country space, freedom from traffic, easy access to recreational activities in nearby mountains, rivers, and forests, as well as great schools and universities. Communicate and collaborate with customers using verbal discussion, written correspondence, teleconferences, technical reports, papers, presentations, and product documentation.
Mechatronics Engineer Hummingbird ScientificMechatronics EngineerLacey, WashingtonYou’ll take full ownership of designing and testing complete mechanical / mechatronics systems - from initial concept through final release and product testing. Hummingbird Scientific is seeking a Mechatronics Engineer to join our team and contribute to the development of instrumentation aimed to advance scientific research.
Field Service Engineer 1-Electric Power Caterpillar IncField Service Engineer 1-Electric PowerWA$89,210–$133,810 / yearEffective Communications: Working knowledge and understanding of effective communication concepts, tools and techniques; ability to effectively transmit, receive, and accurately interpret ideas, information, and needs through the application of appropriate communication behaviors. EPD supports a wide range of customer applications across the globe, including providing back-up power to hospitals, providing emergency power when natural disasters strike, and supporting critical infrastructure for data centers, municipalities, and more.
Mechanical Engineer, Satellite Harnessing Starlink Space Exploration Technologies CorpMechanical Engineer, Satellite Harnessing StarlinkRedmond, WA$100,000–$117,500 / yearITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You may also be eligible for long-term incentives, in the form of company stock or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.
MEP Cost Control Engineer Hoffman Construction CoMEP Cost Control EngineerBellevue, WA$90,000–$120,000 / yearHoffman Construction is a forward-thinking, self-performing builder specializing in technically complex, sustainable projects across advanced technology, mission critical, life sciences, healthcare, higher education, and commercial markets. Must possess strong organizational and computer use skills and have a high level of competency to read/write/speak English, interpret construction-related documentation and communicate with coworkers.
UAS Composites Engineer Heven AeroTech IncUAS Composites EngineerWA$75,000–$150,000 / yearThe ideal candidate combines hands-on experience with composite materials, strong systems-level thinking, and a design-for-manufacturing mindset to integrate sensors, electronics, and mission-specific payloads into robust, flight-ready platforms. Role Summary: We are seeking a highly skilled UAS Engineer with a focus on composite structures and payload integration to support the design, development, and deployment of advanced unmanned aerial systems (UAS).
Systems Engineer III Karman Holdings IncSystems Engineer IIIMukilteo, WAHowever, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. The Systems Engineer III is expected to contribute to product maturation by driving technical planning and execution, organizing and coordinating program-wide technical activities, documenting and reporting results, and ensuring the end product meets all applicable requirements.