NewField Technician-Flagger T. Madison LLC dba Traffic Plan - (formerly SDM Construction)Field Technician-FlaggerNashville, TNT. Madison LLC DBA Traffic Plan is a full-service provider of traffic control services and equipment to utility companies, municipalities and private contractors throughout the Mid-Atlantic. Under the direction of the Field Supervisor or Operations Manager, the Field Technician performs critical functions such as sign installation, flagging, lane closures, and detour setups.
NewMaintenance Technician - Eastside Heights Gallery ResidentialMaintenance Technician - Eastside HeightsNashville, TNCompletes the “make-ready” process to prepare vacant apartment homes for leasing and new move-ins by completing the pre-move-out inspection, creating a “punch” list of maintenance work needed, scheduling vendors and contractors as needed, obtaining needed supplies and materials, completing all maintenance tasks, and inspecting completed work. Demonstrates customer services skills by treating residents and others with respect, interfacing face-to-face with residents and service team, answering resident questions, responding sensitively to complaints about maintenance services, and completing assigned work orders with efficiency and urgency.
Environmental Technician Civil & Environmental Consultants, Inc.Environmental TechnicianFranklin, TennesseeFull timeunassisted), hand excavation/digging (using shovels/picks), carrying and climbing ladders, operating and working from man lifts, operating electric tools (drills, saws, etc.), using hand tools (screw drivers, wrenches, hammers, etc.) and providing services under varying weather conditions; Ability to work independently in the field while following operating procedures; Technical training or experience collecting samples a plus; and. Qualifications: Enjoy working outside; 0 to 5 years experience is preferred; related experience in mechanical, construction, environmental, or solid waste field experience is a plus; Mechanical or construction knowledge is preferred; Valid driver’s license with a driving record in good standing is required, willingness to travel; Must meet physical requirements for driving (pick-up truck), walking inspection of improved and unimproved property, lifting and carrying equipment/mechanical components (occasionally up to 50 lbs.
NewEnvironmental Tank Cleaning Technician Southern Pump & Tank CoEnvironmental Tank Cleaning TechnicianNashville, TNIn addition to construction and service, we also provide our customers with equipment, parts and expertise and the support to find the right solution to meet their needs. From the ground up, our construction and installation teams build fueling and charging stations in the retail, commercial, industrial and government sectors.
Environmental Services Technician (EVS) Select Specialty Hospital - NashvilleEnvironmental Services Technician (EVS)Nashville, TennesseeOur hospital is a critical illness recovery hospital committed to providing world-class inpatient post-ICU services to chronic, critically ill patients who require extended healing and recovery. Using dust cloths and the vacuum cleaner to dust window sills, blinds, floors, and furniture; emptying ashtrays and trash buckets; arranging furniture and equipment in an orderly fashion.
Environmental Subject Matter Experts and GIS Technicians AECOMEnvironmental Subject Matter Experts and GIS TechniciansNashville, TNWe invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We use our extensive knowledge in planning, designing and managing transportation systems - as well as restoring and replacing aging infrastructure - to help our public and private clients find smarter, more advanced ways to move people across cities, countries and continents.
Environmental Services Technician (EVS) Select Medical CorpEnvironmental Services Technician (EVS)Nashville, TNp>Our hospital is a critical illness recovery hospital committed to providing world-class inpatient post-ICU services to chronic, critically ill patients who require extended healing and recovery. Using dust cloths and the vacuum cleaner to dust window sills, blinds, floors, and furniture; emptying ashtrays and trash buckets; arranging furniture and equipment in an orderly fashion.
Environmental Manager Republic ServicesEnvironmental ManagerNashville, TennesseeRegularly supervises Environmental Technicians and Specialists, including responsibility for hiring, training, mentoring, developing, scheduling, directing, managing performance and other related issues; review the work of, and is accountable for the performance of Environmental Technicians and Specialists. We also formed Blue Polymers, a joint venture with Ravago, to develop facilities that will further process plastic material from our Polymer Centers to help meet the growing demand for sustainable packaging.
Civil/Environmental Design Engineer Montrose Environmental Group IncCivil/Environmental Design EngineerNashville, TNOur scientists, engineers, field teams and consultants apply systems thinking that unites science, data and practical expertise to deliver solutions that strengthen our clients' resilience, mitigate risk and protect the air, water and soil that sustain communities, while uncovering responsible paths forward for planet and progress. To thrive in this role, you'll be comfortable taking ownership of the following responsibilities: Plans multiple projects simultaneously including being the senior technical lead on a project, supervising engineering professionals, staff level engineers, technicians, and CAD professionals.
Environmental Health & Safety The Boring CompanyEnvironmental Health & SafetyNashville, TennesseeToday, we are creating the technology to increase tunneling speed and decrease costs by a factor of 10 or more with the ultimate goal of making Hyperloop adoption viable and enabling rapid transit across densely populated regions. Perform regular tunnel and surface inspections, including pre-shift walkthroughs, equipment checks, air quality sampling, and confined space protocols.
ENVIRONMENTAL HEALTH SPECIALIST 1** - 06162026-78366 State of TennesseeENVIRONMENTAL HEALTH SPECIALIST 1** - 06162026-78366Franklin, TNConduct public health complaint inspections in the following programs: food service establishments, hotels, bed and breakfasts, public swimming pools, organized campgrounds, tattoo and body piercing studios, public school buildings, and child care facilities. Learns to train and teach operators/owners and persons in charge how to manage food service establishments using a risk-based approach by offering a monthly food safety training class.
Senior Civil/Environmental Design Engineer Montrose Environmental Group IncSenior Civil/Environmental Design EngineerNashville, TN$125,000–$140,000 / yearThe requirements listed below are representative of the knowledge, skill, and/or ability required:\n\n Bachelor's Degree in Engineering from an accredited four-year college or university; Advanced degree preferred.\n \n\n 5-10 years of related experience\n \n\n Possess a Professional Engineer (PE) license\n \n\n Advanced knowledge of engineering principles\n \n\n Knowledge of computer aided software (Microsoft Suite, Google Suite, AutoCAD, ArcGIS etc.)\n \n\n Ability to complete and maintain HAZWOPER certification with the 40-hour HAZWOPER environmental health and safety class, and annual 8-hour refresher class\n \n\n Proven leadership skills: identifies problems and actively devises appropriate solutions\n \n\n Strong written and verbal communication skills\n \n\n Outgoing / team player with strong problem-solving skills and the ability to manage multiple tasks and priorities\n \n\n Strong organizational and management skills\n \n\n Ability to work well with and mentor others, setting expectations and providing input and feedback in a helpful way that fosters accountability\n \n\n* Ability to actively delegate and communicate in a group-oriented setting, establish and maintain effective working relationships with employees and leaders\n \n\n \nThe above statements are intended to describe the general nature of work being performed by people assigned to this classification. \n \nMAKE THE MOVE TO ACCELERATE YOUR CAREER\n \nWe are a rapidly growing company that values individual leadership, initiative, and impactful decision-making and provides you with support from talented and knowledgeable colleagues and service providers.\n \nThe Environmental Engineering and Consulting team delivers solutions for complex environmental challenges using our regulatory expertise and implementing practical and cost-effective compliance management processes and programs.
Environmental Subject Matter Experts and NEPA Planners AECOMEnvironmental Subject Matter Experts and NEPA PlannersNashville, TNWe invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We use our extensive knowledge in planning, designing and managing transportation systems - as well as restoring and replacing aging infrastructure - to help our public and private clients find smarter, more advanced ways to move people across cities, countries and continents.
Logistics Driver - Testing Technician Magnolia Home InspectionsLogistics Driver - Testing TechnicianNashville, TN$40,000–$65,000Extensive training is provided during your first week of onboarding with ongoing education opportunities as you build your acumen of helping the Magnolia team execute our mission of ‘Protecting, Preparing and Educating Home Buyers.’. Please complete the Magnolia Survey: https://go.apply.ci/s/ODmRKBlPH3.
Senior Field Technician - Air Emissions RWDISenior Field Technician - Air EmissionsNashville, Tennessee$90,000–$140,000 / yearRWDI is a global climate and performance engineering consulting firm that helps its clients redefine what’s possible by overcoming design and operational challenges, while minimizing environmental, user, and resource impact. In the field lead project team and perform on-site stack testing and source emissions monitoring in accordance with federal and regional regulatory methods (e.g., EPA Reference Methods, ECCC).
Construction Materials Testing Field Technician (CMT) Thompson Engineering IncConstruction Materials Testing Field Technician (CMT)Nashville, TNOur services include drilling materials testing construction inspection chemistry laboratory services engineering design environmental assessments surveying geotechnical studies and construction management. From project planning and design through construction and completion we deliver innovative solutions to complex infrastructure and building challenges for industrial commercial transportation federal and municipal clients.
QUALITY TECHNICIAN WellsQUALITY TECHNICIANAshland City, TNAbility to wear all required PPE, including but not limited to safety boots, safety glasses, hearing protection, high visibility vest, hard hat, and other PPE as required by the task, department, or work area. The Quality Technician works closely with production and quality teams to identify issues, maintain documentation, and support continuous improvement in a fast-paced manufacturing environment.
Field Technician I Universal Engineering SciencesField Technician ILebanon, TNThis position primarily works in an outdoor work environment, regularly exposed to varying field conditions, including: Sites that may not be accessible by vehicle, requiring travel on foot through wetlands, swamps, grasslands, fields, and other uneven or rugged terrain with natural and man-made obstacles such as sand, brush, and debris. Ability to use your senses to see (including close, distant, and peripheral vison, depth vision, and ability to focus) smell, hear, touch (use hands to reach climb or balance, crouch, stoop, crawl, kneel and sit).
Archaeology Field Technician Stantec IncArchaeology Field TechnicianNashville, TNJoin Stantecs Cultural Resources team in and around our Louisville, KY, Nashville, TN, Knoxville, TN, or Chattanooga, TN offices to play an integral role in lead doing archaeological survey, testing, data recovery, and monitoring. Responsibilities may include but are not limited to: • Perform archaeological fieldwork tasks including controlled surface survey; • Shovel test survey; • Excavation.
Field Service Technician MuntersField Service TechnicianTennesseeThe worker is required to have close visual acuity to perform an activity such as: preparing and analyzing data, viewing computer terminals, expansive reading, etc. 42.00 Job Title: Field Service TechnicianLocation: TennesseeCompany: Munters CorporationSalary Range: $30.14/hr - $39.16/hrAbout Us: Munters is a global leader in climate solutions for mission-critical processes.
NewSkillbridge Fellowship - Industrial Maintenance Technician Tyson Foods IncSkillbridge Fellowship - Industrial Maintenance TechnicianTNRelevant Backgrounds May Include (Not Required): Army: 91B (Wheeled Vehicle Mechanic), 91D (Power Generation Equipment Repairer), 91E (Allied Trades Specialist), 91C (Utilities Equipment Repairer), 15T (UH-60 Helicopter Repairer). Tyson Foods proudly supports the Department of Defense SkillBridge program and invites transitioning service members to join our team as an Equipment Maintenance Fellow.
CMT Field Technician 1 AtlasCMT Field Technician 1Murfreesboro, TNWe strive to be the most sought-after infrastructure and environmental solutions company, known for our unique, values-driven approach and brought to life by the industry’s most exceptional people. Atlas is a nationwide leader in civil engineering, materials testing and geotechnical consulting services for environmental, industrial and infrastructure construction projects.
Fiber Installation Technician MasTec IncFiber Installation TechnicianTN$20–$24 / hourAbility to walk over all types of terrain in all kinds of weather while carrying tools and equipment including gaffs, ladders and fully loaded tool belts Ability to safely use weight-bearing equipment (such as gaffs, safety harness and ladders) within the maximum weight limitations of that equipment Ability to accurately measure distances, using tapes and other measuring devices Ability to carry, climb and operate extension ladder, (approximately 32ft high and 90 pounds) Ability to climb poles using gaffs, hooks and climbing belt as needed Ability to differentiate between different sizes and colors of wires Ability to make cable connections in tight spaces by bending, reaching and twisting Ability to perform job from high places (i.e. poles and roofs) Ability to work while standing 50-70% of the time Ability to work with small components and wires to make cable connections Ability to use handheld communication devices and applications Ability to travel (including during inclement weather) to and from assigned territories and company facilities Ability to work outside for extended periods in any season and/or during inclement weather Familiarity with computer operating systems, and a myriad of consumer and commercial communications devices (e.g., PDAs, smartphones, routers, modems, converters and wireless devices), and computer software applications Ability to complete documentation accurately Moderate understanding of IP networks Basic understanding of Time Division Multiplexing (TDM) Ability to operate appropriate computer or test equipment associated with position (e.g. Must have the ability to safely operate a company vehicle Ability to use basic cable installation tools and hand tools (electric drills, hammers, wrenches, screwdrivers) and perform jobs from high places (on poles and roofs,) including climbing poles with proper equipment (safety belt, strap, climbers,) ladders, and bucket trucks (18 to 20 feet,) as determined by the system's requirements.
NewService Technician - Professional Hussmann CorporationService Technician - ProfessionalNashville, TennesseeFull timeDemonstrate understanding of low/high pressure oil systems, split condensing/low ambient controls, refrigerated equipment startup, EMS controls, new retail store refrigeration startup, air flow characteristics and testing, motor VFD’s, all system defrost types, recovery setup, torch setup, compressor operating parameters, conventional refrigeration system layout, and parallel rack system layout, and advanced wiring diagrams. Detect and repair leaks on conventional systems and parallel racks, solder with copper-to-brass and copper to steel, conduct compressor diagnosis and replacements, troubleshoot and repair more complex service calls, check/adjust oil management system and compressor oil level control.
Service Technician - Certified Hussmann CorporationService Technician - CertifiedNashville, TennesseeFull timeDetect and repair leaks on racks or single-unit piping, solder with copper-to-brass and copper to steel, diagnose low air flow, install PVC drain pipe, replace evaporator/condenser motors, use temperature meters and sensors, receive, uncrate and properly hang blower coils, fabricate hangers, struts and supports, power wash air-cooled condensing units, repair Hussmann brand products, replace any component on a rack and perform walk-in case installation with some direction from a Master or Lead Technician. Demonstrate understanding of sub cool, superheat, refrigerant and oil properties, vacuums and microns, system evacuation and charging, system pump down, system defrost types, single phase compressor start components, recovery setup, torch setup, conventional refrigeration system layout, and parallel rack system layout.
Field Technician - Construction Materials Testing Professional Service Industries IncField Technician - Construction Materials TestingNashville, TNFull timeConstruction Technician - Construction Materials Testing - Nashville, TennesseeIntertek, a Nationally Recognized Testing Lab (NRTL) and leading provider of quality and safety solutions to many of the world's leading brands and companies, is actively seeking a CMT Technician to join our Professional Services Industries Inc. (Intertek-PSI) team in Memphis, TN. Working at Intertek means joining a global network of state-of-the-art facilities and passionate people who deliver superior customer service with a purpose of bringing quality, safety, and sustainability to life.
Field Service Technician Munters ABField Service TechnicianTN$30.14–$39.16 / hourThe worker is required to have close visual acuity to perform an activity such as: preparing and analyzing data, viewing computer terminals, expansive reading, etc. Job Description: Our Field Service Technicians travel to customer sites to safely repair, troubleshoot, and maintain commercial and industrial dehumidification equipment.
NewQuality Technician GeoStabilization InternationalQuality TechnicianNashville, TN$45,000–$60,000 / yearAccess Limited brings over a century of steep-slope expertise and operates North America's largest fleet of spider excavators, delivering complex rockfall and geotechnical solutions in the most challenging environments. GeoStabilization International (GSI), Access Limited, and RoadGuard together form a leading infrastructure solutions platform dedicated to protecting people and strengthening critical infrastructure across North America and New Zealand.
Senior Construction Materials Field Technician ECS LtdSenior Construction Materials Field TechnicianFranklin, TennesseeField Activities: Perform observation, testing, sampling, and inspection of materials, including soils, aggregates, concrete, grout, masonry, asphalt, and structural steel placement on construction sites; Execute tasks based on project requirements under the guidance of other senior technicians, staff professionals, and project managers. Communication: Maintain daily communication with site contractors, other technicians, and project managers; Keep supervisor and project teams informed of changing site conditions and additional testing requested; Attend project meetings with senior staff as requested.
Junior Field Technician Montrose Environmental Group IncJunior Field TechnicianTN$25–$35 / hourFREQUENT: Sitting, standing, and walking; Lifting up to 50 pounds several times a day; Overhead lifting of over 20 pounds; Bending, stooping, crawling, and climbing ladders; Long hours involving overtime and weekends as necessary; Keyboarding/typing; Ability to read effectively from a computer screen, sampling device, and/or paper copy; Ability to handle a large volume of work and perform multiple tasks in a fast-paced environment; Frequent, unscheduled travel for extended periods of time; and, Wear half-face and/or full-face air purifying respirator (APR) as well as supplied air respirators in the form of Self-Contained Breathing Apparatus (SCBA) and hose supplied respirator with medical clearance as required under 29CFR 1910.134. May work outdoors and may be exposed to hot and cold environments and extreme weather conditions including but not limited to: sunlight, rain, snow, windy conditions; Encounter environments presenting physical hazards including: uneven ground, standing water, ditches, dusty conditions, rapidly moving transportation/remediation equipment, and physical stress associated with the wear of personal protective equipment; May be assigned varying shifts including overnight shifts; and.
Multi-Craft Maintenance Technician 3MMulti-Craft Maintenance TechnicianOld Hickory, TN$33.04–$39.63 / hourChoosing where to start and grow your career has a major impact on your professional and personal life, so it is equally important for you to know that the company that you choose to work for, and its leaders, will support and guide you. This targeted compensation range represents a good faith estimate and can vary based on factors including, but not limited to, job-related knowledge, skills, and experience.
Construction Materials Field Technician ECS LtdConstruction Materials Field TechnicianFranklin, TennesseeCommunication: Maintain daily communication with site contractors, fellow technicians, and project managers; Communicate changing site conditions and additional requested testing to supervisor; Attend project meetings as requested; Assist with organization of field equipment and notify supervisor of broken or missing equipment as needed. ECS is currently ranked #60 in Engineering News-Record’s Top 500 Design Firms (April 2026), #148 in Engineering News-Record’s Top 200 Environmental Firms (October 2025) and #50 in Zweig Group’s Hot Firm List (May 2025).
Service Technician - Certified Panasonic Corporation of North AmericaService Technician - CertifiedMurfreesboro, TNDetect and repair leaks on racks or single-unit piping, solder with copper-to-brass and copper to steel, diagnose low air flow, install PVC drain pipe, replace evaporator/condenser motors, use temperature meters and sensors, receive, uncrate and properly hang blower coils, fabricate hangers, struts and supports, power wash air-cooled condensing units, repair Hussmann brand products, replace any component on a rack and perform walk-in case installation with some direction from a Master or Lead Technician. Demonstrate understanding of sub cool, superheat, refrigerant and oil properties, vacuums and microns, system evacuation and charging, system pump down, system defrost types, single phase compressor start components, recovery setup, torch setup, conventional refrigeration system layout, and parallel rack system layout.
NewService Technician - Professional Panasonic Corporation of North AmericaService Technician - ProfessionalNashville, TNBi-annual bonuses based on performance Paid training and access to online training videos Paid drive time (including overtime) 22 days paid off - 10 days of vacation, 12 company holidays Company vehicle provided On-the-job, hands-on training opportunities for Technicians, electrical and mechanical theory, and model-based training Sign-on bonus available Responsibilities Performs maintenance, diagnosis and repair of refrigeration, heating & air-conditioning systems commonly installed in supermarkets, convenient stores and cold storage facilities. Demonstrate understanding of low/high pressure oil systems, split condensing/low ambient controls, refrigerated equipment startup, EMS controls, new retail store refrigeration startup, air flow characteristics and testing, motor VFD's, all system defrost types, recovery setup, torch setup, compressor operating parameters, conventional refrigeration system layout, and parallel rack system layout, and advanced wiring diagrams.
Senior Construction Materials Field Technician Engineering Consulting Services LtdSenior Construction Materials Field TechnicianFranklin, TNCommunication: Maintain daily communication with site contractors, other technicians, and project managers; Keep supervisor and project teams informed of changing site conditions and additional testing requested; Attend project meetings with senior staff as requested. Responsibilities: Perform observation, testing, sampling, and inspection of materials, including soils, aggregates, concrete, grout, masonry, asphalt, and structural steel placement on construction sites; Execute tasks based on project requirements under the guidance of other senior technicians, staff professionals, and project managers.
Construction Materials Field Technician Engineering Consulting Services LtdConstruction Materials Field TechnicianFranklin, TNCommunication: Maintain daily communication with site contractors, fellow technicians, and project managers; Communicate changing site conditions and additional requested testing to supervisor; Attend project meetings as requested; Assist with organization of field equipment and notify supervisor of broken or missing equipment as needed. ECS is currently ranked #66 in Engineering News-Record's Top 500 Design Firms (April 2025), #148 in Engineering News-Record's Top 200 Environmental Firms (October 2025) and #50 in Zweig Group's Hot Firm List (May 2025).
Quality Technician GeoStabilization International LLCQuality TechnicianTN$45,000–$60,000 / yearp>If you're a high-agency technician who wants to build a career in field leadership while solving real-world infrastructure challenges, we want to hear from you. We deliver critical infrastructure solutions in high-risk environments-where quality, safety, and precision are non-negotiable.
New(118) Field Service Technician I Opterra Career(118) Field Service Technician INashville, TennesseeThe Field Service Technician I is responsible for performing comprehensive maintenance services on stormwater facilities and devices, and vegetation management services across a wide range of customer sites. Gain knowledge on immediate response expected for chemical spills and neutralize, when necessary, which includes application of bleach, setup of sock perimeter, and application of Oil-Dry as is dictated by the label and training.
CMT Field Technician 1 Atlas Technical Consultants IncCMT Field Technician 1Murfreesboro, TNWho We Are: We strive to be the most sought-after infrastructure and environmental solutions company, known for our unique, values-driven approach and brought to life by the industry?s most exceptional people. Atlas is a nationwide leader in civil engineering, materials testing and geotechnical consulting services for environmental, industrial and infrastructure construction projects.
NewRefrigeration Technician - Veteran Pathway Tyson Foods IncRefrigeration Technician - Veteran PathwayTNRelevant Backgrounds May Include (Not Required): Army: 91B (Wheeled Vehicle Mechanic), 91D (Power Generation Equipment Repairer), 91E (Allied Trades Specialist), 91C (Utilities Equipment Repairer), 15T (UH-60 Helicopter Repairer). If you've troubleshot mechanical, electrical, Refrigeration or HVAC systems, performed preventive maintenance, followed safety procedures, or ensured equipment reliability, your experience can translate directly into this role.
Field Service Technician I Clean Harbors IncField Service Technician IGreenbrier, TNli>This position includes emergency response, a continuing condition of employment is agreeing to be on-call; on occasion working on weekends and holidays will be required; emergency response situations can extend beyond 8 hours, up to 12-24 hrs. This role will be active in the field responsible for the performance of tasks associated with hazardous waste clean-up, site-remediation, equipment decontamination and handling of hazardous materials.
Maintenance Technician Roscoe Property ManagementMaintenance TechnicianNashville, TNComplete grounds work as directed by Maintenance Manager and/or Community Manager which may include picking up trash, clean dumpster areas, trash rooms and trash chutes, blowing the parking area and sidewalks, removing debris, power washing, etc. Assist in pool maintenance and understand basic pool care (chemicals reading, making chemical adjustments, backwashing, pool cleaning, etc.).
Nashville, TN - Avionics Technician Duncan Aviation IncNashville, TN - Avionics TechnicianNashville, TN$29.70–$33.50 / hourtolerates working in confined spaces and heights above four feet; reads small print and identifies colors; hears sounds associated with mechanical deficiencies; repetitive motion; works with moving parts and vibration; tolerates products and materials associated with component maintenance; tolerates standing, walking, bending, kneeling, stooping, crouching, crawling, climbing and sitting. Troubleshoots, repairs, test, removes and replaces avionics and instrument wiring and systems installed in various airframes using hand tools, test equipment, technical documents, and technical reference materials.
Injection Molding Process Technician Johnson Electric Holdings LtdInjection Molding Process TechnicianSpringfield, TNWe are committed to providing an inclusive, diverse and equitable workplace where employees of different backgrounds feel valued and respected, regardless of their age, gender, race, ethnicity or religious background. Why You'll Love Working Here: Sustainability Commitment: Work for a company committed to sustainability and making a positive impact on the environment.
Instrument & Electrical Technician The ChemoursInstrument & Electrical TechnicianTennesseeIn key sectors such as clean energy, advanced electronics, high-performance computing and AI, climate friendly cooling, and high-quality paints and coatings for homes and industrial infrastructure---sustainable solutions and more modern living depend on Chemours chemistry. The Instrument & Electrical Technician supports safe, reliable, and compliant plant operations by maintaining, troubleshooting, calibrating, and repairing electrical, electronic, and instrumentation systems in a high-hazard chemical manufacturing environment.
Service Technician II First Key HomesService Technician IINashville, TennesseeOperating both independently and as part of a team, the Service Technician II executes a broad range of tasks across multiple trades—including plumbing, electrical, HVAC, and general home maintenance. Extensive field work within the assigned market, with 90% of time spent at homes performing maintenance and repairs and commuting between properties using a company-provided vehicle.
Field Technician - Construction Materials Testing Intertek Group PlcField Technician - Construction Materials TestingNashville, TNIntertek, a Nationally Recognized Testing Lab (NRTL) and leading provider of quality and safety solutions to many of the world's leading brands and companies, is actively seeking a CMT Technician to join our Professional Services Industries Inc. (Intertek-PSI) team in Memphis, TN. Working at Intertek means joining a global network of state-of-the-art facilities and passionate people who deliver superior customer service with a purpose of bringing quality, safety, and sustainability to life.
NewField Technician ActionField TechnicianTennesseeIn this role, you’ll provide essential industrial cleaning and environmental services—including vacuuming, flushing, and blasting—across a wide range of industries such as power generation, manufacturing, transportation, food production, and more. Description: Field TechnicianDepartment: Direct LaborLocation: Athens, TNBusiness Unit: EnvironmentalStatus: Full-time/Non-ExemptReports to: Field Supervisor Action Environmental is a full-service environmental and industrial services contractor.
FIBER, PAINT, & REPAIR TECHNICIAN WellsFIBER, PAINT, & REPAIR TECHNICIANAshland City, TNAbility to wear all required PPE, including but not limited to safety boots, safety glasses, hearing protection, high visibility vest, hard hat, and other PPE as required by the task, department, or work area. Ability to perform physically demanding work, including lifting up to 75 lbs occasionally and frequent bending, climbing, kneeling, twisting, squatting, crawling, and repetitive hand/arm use.