Structural Design Engineer GlobalPunditsStructural Design EngineerGreenville, SCContractorProficiency executing EPC projects utilizing engineering analysis, 3D modeling and 2D computer-aided drafting and design (CADD) automation tools in a multi-discipline environment. •Provide technical support to activities associated with equipment and material procurement and subcontracting including scopes of work, technical bid evaluations and review of vendor submittals.
Principal Instrumentation and Controls (I&C) Design Engineer GlobalPunditsPrincipal Instrumentation and Controls (I&C) Design EngineerGreenville, SCContractorPerform a broad range of I&C design activities, including design definition, control systems architecture and development, digital systems, Programmable Logic Controller (PLC), Distributed Control Systems (DCS), network configuration, logic development, network switches, process controls, Piping and Instrumentation Diagram (P&ID) development support and review, Human Machine Interfaces (HMI), communication protocols, routing, and layout, Safety Integrity Level (SIL), and procurement activities. Represent control systems in model reviews; closely monitor 3D modeling prepared by the design group using review software Review and audit specifications for DCS, PLC, and Safety Instrumented Systems (SIS) hardware and software applications Monitor DCS / PLC / SIS design developed by the design group.
NewSite EHS Engineer OP MobilitySite EHS EngineerDuncan, SCToday, OPmobility develops technological solutions across four areas of expertise: exterior and lighting systems, the integration of complex modules, technologies related to energy storage, hydrogen and electrification, and a division dedicated to the development of embedded software and digital solutions. We are committed to building inclusive teams, promoting diversity and equality, and ensuring that every application is considered fairly - because the future of mobility is built by diverse perspectives, bold ideas, and people who dare to move forward.
INDUSTRIAL ASSEMBLY ENGINEER OP MobilityINDUSTRIAL ASSEMBLY ENGINEERGreer, SCInnovation-driven since its creation, the Group develops and produces intelligent exterior systems, customized complex modules, lighting systems, clean energy systems and electrification solutions for all mobility companies. With a €11.4 billion economic revenue in 2023, a global network of 152 plants and 40 R&D centers, OPmobility relies on its 40,300 employees to meet the challenges of transforming mobility.
SITE QUALITY ENGINEER OP MobilitySITE QUALITY ENGINEERGreer, SCToday, OPmobility develops technological solutions across four areas of expertise: exterior and lighting systems, the integration of complex modules, technologies related to energy storage, hydrogen and electrification, and a division dedicated to the development of embedded software and digital solutions. • Participates with the project team in the poke-yoke definition for the new products, • Sets-up limit samples and Problem Alerts and organizes training with the production area leaders.
Packaging Engineer - Toledo OP MobilityPackaging Engineer - ToledoGreer, SCInnovation-driven since its creation, the Group develops and produces intelligent exterior systems, customized complex modules, lighting systems, clean energy systems and electrification solutions for all mobility companies. With a €11.4 billion economic revenue in 2023, a global network of 152 plants and 40 R&D centers, OPmobility relies on its 40,300 employees to meet the challenges of transforming mobility.
Senior Process Engineer GlobalPunditsSenior Process EngineerGreenville, SCContractorPlan, organize, and coordinate process/mechanical engineering and multi-disciplined team/design projects while engaged in the planning, design and construction phases of engineering projects including project startup. · Bachelor of Science in Chemical or Mechanical Engineering with a minimum of 10 years’ experience (nuclear preferred) in design, estimating, specification preparation, construction document preparation, and related phases of engineering.
Supply Chain Engineer - VIE Anderson OP MobilitySupply Chain Engineer - VIE AndersonAnderson, SCToday, OPmobility develops technological solutions across four areas of expertise: exterior and lighting systems, the integration of complex modules, technologies related to energy storage, hydrogen and electrification, and a division dedicated to the development of embedded software and digital solutions. We are committed to building inclusive teams, promoting diversity and equality, and ensuring that every application is considered fairly - because the future of mobility is built by diverse perspectives, bold ideas, and people who dare to move forward.
PLANT TECHNICAL ENGINEER OP MobilityPLANT TECHNICAL ENGINEERAnderson, SCToday, OPmobility develops technological solutions across four areas of expertise: exterior and lighting systems, the integration of complex modules, technologies related to energy storage, hydrogen and electrification, and a division dedicated to the development of embedded software and digital solutions. We are committed to building inclusive teams, promoting diversity and equality, and ensuring that every application is considered fairly - because the future of mobility is built by diverse perspectives, bold ideas, and people who dare to move forward.
Supplier Quality Development Engineer OP MobilitySupplier Quality Development EngineerGreer, SCToday, OPmobility develops technological solutions across four areas of expertise: exterior and lighting systems, the integration of complex modules, technologies related to energy storage, hydrogen and electrification, and a division dedicated to the development of embedded software and digital solutions. Technical knowledge of purchased automotive commodities including chrome parts, metal parts, injected plastics parts, fasteners, or paint; Experience negotiating automotive commodities; and.
Project Engineer / Job Coordinator System OneProject Engineer / Job CoordinatorSpartanburg, SCReporting to the Vice President of Engineering, this role operates with a high degree of autonomy as project lead and plays a vital part in maintaining our client’s reputation for reliable, high-quality service. This key position serves as the primary interface between customers and our client’s team, ensuring technical clarity, schedule performance, and high-quality service execution.
Field Engineer - Energy (Remote Opportunity) America Fujikura LtdField Engineer - Energy (Remote Opportunity)Duncan, SCRemoteRequired) Develop expertise in AFL's optical products and hardware used by utility market customers in order to provide the same customer training and support as AFL's electrical conductor accessories. (Preferred) Experience with AFL products or equivalent (substation accessories, bus conductors, compression accessories, cable motion control hardware, formed wire cable hardware, and the related tools).
Grid Solutions Strategy Manager - Energy (Hybrid Office Schedule) America Fujikura LtdGrid Solutions Strategy Manager - Energy (Hybrid Office Schedule)Duncan, SCThis role serves as the Energy Business Units (BU) principal technology strategist within Market Development, translating macro grid trends, Utility, Independent Power Producer (IPP), and large load investment patterns, regulatory shifts, and emerging architectures into a coherent technology roadmap, intellectual property (IP) strategy, and brand position for AFLs portfolio of optical, electrical, and power-delivery solutions. Aging transmission and distribution infrastructure must absorb unprecedented load growth from electrification and AI-driven data centers, integrate variable renewable generation at scale, and harden against extreme weather and physical threats - all while operating reliably across a converging grid that no longer operates siloed between electric utility front-of-the-meter (FTM) and non-utility behind-the-meter (BTM) systems.
Project Manager V - Energy KCI Technologies Inc.Project Manager V - EnergyGreenville, South CarolinaResponsible for assisting the engineering practice leader in project budgets and technical deliverables, QA/QC reviews for project or task deliverables, technical and price proposals, communication and interaction with external and internal clients. One or more of the following: 1. In a supervisory capacity a) plans, develops, coordinates, and directs a number of large and important projects or a project of major scope and importance or b) is responsible for the entire engineering program of limited complexity and scope.
Energy and Water Site Leader (Experienced Professional) Compagnie Generale des Etablissements MichelinEnergy and Water Site Leader (Experienced Professional)SCDrawing on its deep know-how in polymer composite materials, Michelin is constantly innovating to manufacture high-quality tires and components for critical applications in demanding fields as varied as mobility, construction, aeronautics, low-carbon energies and healthcare. As the largest rubber manufacturing plant in the world with 800+ employees, our plant produces rubber, metallic and textile tissues, as well as other technologies for all types and sizes of tires, including passenger cars, light and heavy truck, mining and aircraft tires.
HVAC PRINCIPAL DESIGN ENGINEER - 7001- SRS - Greenville, SC OLH Inc.HVAC PRINCIPAL DESIGN ENGINEER - 7001- SRS - Greenville, SCGreenville, SCSRS utilizes various work schedules including 5/8s (8 hour/day; five days per week), 4/10’s (10 hours/day; four days per week), and 9/80’s (9 hours/day, five days on week AA and four days on week BB. Development of black utility (chiller, boiler, custom Air Handling Unit (AHU), air compressor and cooling tower) specifications based upon sizing data provided by Process.
Senior Electrical Engineer GpacSenior Electrical EngineerGreenville, SC110000–140000This position offers the opportunity to serve as a Project Manager or Lead Electrical Engineer on complex building projects while partnering with multidisciplinary teams to deliver high-quality, code-compliant designs for clients throughout the region. This is an excellent opportunity for a licensed Professional Engineer looking to lead challenging projects, mentor engineers, and work with a collaborative team delivering innovative solutions across a wide variety of market sectors.
Instrumentation and Controls (I&C) Design Engineer Globalpundits, IncInstrumentation and Controls (I&C) Design EngineerGreenville, SCDiscipline Specific Job Requirements Perform a broad range of I&C design activities, including design definition, control systems architecture and development, digital systems, Programmable Logic Controller (PLC), Distributed Control Systems (DCS), network configuration, logic development, network switches, process controls, Piping and Instrumentation Diagram (P&ID) development support and review, HMI, communication protocols, routing, and layout, Safety Integrity Level (SIL), and procurement activities. Represent control systems and participate in model reviews Develop specifications and design of DCS, PLC and Safety Instrumented Systems (SIS) hardware and software applications; monitor DCS / PLC / SIS design developed by the design group.
Electrical Senior Design Engineer Globalpundits, IncElectrical Senior Design EngineerGreenville, SCProficiency executing large EPC projects utilizing engineering analysis, 3D modeling and 2D Computer-Aided Drafting and Design (CADD) automation tools in a multi-discipline environment. Ability to attend to detail and work in a time-conscious and time-effective manner Intermediate computer and software skills to include proficiency in the use of word processing, e-mail, spreadsheet and electronic presentation programs.
Mechanical Design Engineer Globalpundits, IncMechanical Design EngineerGreenville, SCPreferred Qualifications Professional Engineer license Experience with design of systems, structures and components for nuclear facilities under the requirements of American Society of Mechanical Engineers (ASME) NQA-1 Practical field experience EPC project experience for the following industries: U.S Department of Energy or other U.S. Federal Government Agency Nuclear facilities under a nuclear quality assurance program Manufacturing, pharmaceutical or biotechnology Intermediate knowledge of: Equipment specification development Instrumentation and Controls (I&C) requirements for packaged equipment. AutoCAD Establish equipment requirements and prepare equipment data sheets for mechanical equipment including unfired and fired heat transfer equipment, packaged equipment, pressure vessels, pumps and compressors, or packaged equipment Evaluate dimensions, equipment connections, and equipment performance including pressure profiles, heat transfer rates, and off-design cases.
Senior Mechanical Engineer Kimmel & AssociatesSenior Mechanical EngineerGreenville, SC$140,000–$150,000Through innovative HVAC engineering, electrical upgrades, building automation systems, preventative maintenance, and energy optimization, the company helps commercial and institutional clients reduce operating costs while improving building performance and environmental impact. This is an excellent opportunity for a technically strong engineer who enjoys solving challenging engineering problems, mentoring junior staff, and collaborating with multidisciplinary teams throughout the entire project lifecycle—from conceptual design through construction.
Electrical Engineer (BESS Focus) AECOMElectrical Engineer (BESS Focus)Greenville, SCOur team provides a wide range of engineering services in support of projects across the country with renewable project scopes such as commercial and industrial installations focused on resiliency, efficiency and reliability as well as those utility scale projects seeking to power communities via interconnected networks or high-density installations. We take on the most complex challenges and pioneer innovative, iconic solutions that push the limits of what's possible - the world's longest cable-stayed bridge, record-breaking sports events, the largest greenfield port development mega project, life-sustaining disaster recovery programs, and the tallest tower in the Western Hemisphere.
Project Engineer/Project Manager S&ME, Inc.Project Engineer/Project ManagerGreenville, SCS&ME is looking for a motivated and passionate Project Engineer-Project Manager to join our Energy team working on civil geotechnical, geostructural, and/or construction projects out of our Greenville-Spartanburg, South Carolina office. This role blends engineering expertise, field presence, and client interaction, giving you direct influence over project outcomes while mentoring team members and strengthening relationships across the engineering and construction community.
NewTransmission EPC Project Engineer - Lead Michael Page InternationalTransmission EPC Project Engineer - LeadSpartanburg, South Carolina$145,000–$190,000 / yearFull timeIn collaboration with construction partners and technical leads, facilitate discussions on technical risk analysis and mitigation, preliminary routing and design, and bill-of-material takeoff support. Lead scope, schedule, and budget development with a focus on activities and risks unique to AD projects (e.g., procurement support, construction support, critical path scheduling).
Instrumentation and Controls (I&C) Principal Design Engineer Globalpundits, IncInstrumentation and Controls (I&C) Principal Design EngineerGreenville, SCDiscipline Specific Job Requirements Perform a broad range of I&C design activities, including design definition, control systems architecture and development, digital systems, Programmable Logic Controller (PLC), Distributed Control Systems (DCS), network configuration, logic development, network switches, process controls, Piping and Instrumentation Diagram (P&ID) development support and review, Human Machine Interfaces (HMI), communication protocols, routing, and layout, Safety Integrity Level (SIL), and procurement activities. Represent control systems in model reviews; closely monitor 3D modeling prepared by the design group using review software Review and audit specifications for DCS, PLC, and Safety Instrumented Systems (SIS) hardware and software applications Monitor DCS / PLC / SIS design developed by the design group.
Mechanical Senior Design Engineer Globalpundits, IncMechanical Senior Design EngineerGreenville, SCCoordinate technical issues with other disciplines, project management, vendors, and clients Execute work in compliance with Project Quality Plan and procedures Execute work in accordance with the approved project scope, cost, and schedule baselines Develop and review estimates, schedules, and progress reports including efforthour estimating and staff forecasting. Establish, control, and report on material key quantities; provide analysis and forecasts Provide technical support to activities associated with equipment and material procurement and subcontracting including scopes of work, technical bid evaluations, and review of vendor submittals.
Process Principal Design Engineer Globalpundits, IncProcess Principal Design EngineerGreenville, SCAnalysis Heat and material balances; utility summaries / balances Block flow diagrams; process flow diagrams P&IDs Equipment list Equipment process datasheets Control systems datasheets. Demonstrated experience managing and leading large projects Proficiency with project set-up, development of control-level schedules, progress reporting, and project close-out Practical field experience.
HVAC Design Engineer (Principal) JG Management Systems IncHVAC Design Engineer (Principal)Greenville, SCProficiency executing large EPC projects utilizing engineering analysis, 3D modeling and 2D computer-aided drafting and design (CADD) automation tools in a multi-discipline environment. This policy applies to all applicants, employees, including managers, supervisors, co-workers, and non-employees such as customers, clients, vendors, consultants, or any other entity in professional contact with the Company.
Senior Mechanical Engineer - (MEP) Mechanical Electrical Plumbing McKim & Creed IncSenior Mechanical Engineer - (MEP) Mechanical Electrical PlumbingGreenville, SCWhat To Expect Day-To-Day: This person is a technical lead as part of a multi-discipline project team on projects in the Buildings, Energy, and Infrastructure group, in support of Mechanical (HVAC, plumbing and fire protection) systems for facility types including healthcare; higher education; institutional facilities; federal, state and local government; K-12 education and other commercial/industrial facilities. McKim & Creed has a reputation for state-of-the-art engineering services that help energy users and providers convert facilities to cleaner, more efficient energy sources; harness the power of renewables; and optimize existing infrastructure and resources.
Electrical Engineer Optima EngineeringElectrical EngineerGreenville, SCFull timeAt Optima Engineering , an employee-owned MEP engineering consulting firm, we focus on delivering high-quality mechanical, electrical, plumbing, fire protection, and technology design solutions for buildings across the Southeast. We provide clients with comprehensive services—including mechanical, electrical, plumbing, fire protection, technology/low voltage, lighting design, and commissioning—across diverse markets such as mission critical, education, healthcare, commercial, and government.
Mechanical Engineer Optima EngineeringMechanical EngineerGreenville, SCFull timeAt Optima Engineering , an employee-owned MEP engineering consulting firm, we focus on delivering high-quality mechanical, electrical, plumbing, fire protection, and technology design solutions for buildings across the Southeast. We provide clients with comprehensive services—including mechanical, electrical, plumbing, fire protection, technology/low voltage, lighting design, and commissioning—across diverse markets such as mission critical, education, healthcare, commercial, and government.
Mid-Senior Civil Engineer Tetra Tech IncMid-Senior Civil EngineerGreenville, SCThis position will be part of a dynamic regional team of engineers, scientists, and technicians engaged in a variety of projects providing planning, design, and engineering services focused on stormwater management, water/wastewater infrastructure design and improvements, land development, and/or construction services in the water resources area of practice in civil engineering. With 30,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science to address the entire water cycle, protect and restore the environment, design sustainable and resilient infrastructure, and support the clean energy transition.
Environmental Project Engineer S&ME, Inc.Environmental Project EngineerSpartanburg, SCFull timeThis position includes a mix of field and office work and requires collaboration with clients, contractors, regulators, local government officials, and internal project teams to deliver high-quality, compliant, and sustainable project solutions. As an Environmental Project Engineer, you will leverage your technical expertise to support and lead projects for public sector, manufacturing, energy, industrial, government, and real estate clients.
Structural Design Engineer Globalpundits, IncStructural Design EngineerGreenville, SCProficiency executing EPC projects utilizing engineering analysis, 3D modeling and 2D computer-aided drafting and design (CADD) automation tools in a multi-discipline environment. •Provide technical support to activities associated with equipment and material procurement and subcontracting including scopes of work, technical bid evaluations and review of vendor submittals.
HVAC Principal Design Engineer Globalpundits, IncHVAC Principal Design EngineerGreenville, SCProvide technical support to activities associated with equipment and material procurementand subcontracting including scopes of work, technical bid evaluations, and review of vendor submittals. Ability to communicate effectively with audiences that include but are not limited to projectmanagement, coworkers, clients, vendors, and subcontractors.
Principal Engineer Electrical Zachry Holdings, IncPrincipal Engineer ElectricalGreenville, SCOur Power Generation team supports a strong and growing portfolio of combined cycle facilities, providing engineers with both long-term project stability and exposure to technically challenging work. If you are a senior electrical engineer looking to apply your expertise on critical power projects while continuing to grow your technical and leadership impact, Zachry offers a rewarding and stable career path.
Senior Geotechnical Consultant / Principal Engineer Bunnell-Lammons Engineering, IncSenior Geotechnical Consultant / Principal EngineerGreenville, SCFull timeThese projects span a multitude of sectors, including transportation, infrastructure, campus facilities (Laboratory buildings, academic buildings, and athletic facilities), mid to high-rise buildings, civil infrastructure, and geologic hazard mitigation (Structural improvements, ground improvements, and slope stabilization). MANAGEMENT FOCUSED – Making things happen; being influential; taking control of a situation; providing guidance to others; and acting as a facilitator; Always leave or end conversations with clients and co-workers feeling better for having met you.
Mechanical Engineer III - HVAC & Utilities CRB Group, Inc.Mechanical Engineer III - HVAC & UtilitiesGreenville, SCThis position is responsible for overseeing the Mechanical discipline scope of work and managing the discipline budget on small to medium projects of intermediate complexity, and coordinating with internal and external architects and engineers, as well as clients, construction managers, subcontractors, vendors and manufacturers. Typical tasks and deliverables include load calculations, utility assessments, energy modeling, design reports, code evaluations, plans, P&IDs, schedules, installation details, equipment and system selection and specification, and coordination with manufacturers and trade partners.
Mechanical Engineer IV CRB Group, Inc.Mechanical Engineer IVGreenville, SCTypical tasks and deliverables that are executed by or under the supervision of the Mechanical Engineer IV include site selection, master planning, commissioning and startup, load calculations, utility assessments, energy modeling, design reports, code evaluations, plans, P&IDs, schedules, HAZOP reviews, installation details, equipment and system selection and specification, and coordination with manufacturers and trade partners. This position is responsible for overseeing the Mechanical discipline scope of work and managing the discipline budget on all project phases, sizes and levels of complexity, and coordinating with internal and external architects and engineers, as well as clients, construction managers, subcontractors, vendors and manufacturers.
Process Engineer Synthomer PlcProcess EngineerSCSynthomer is a leading supplier of high-performance, highly specialised polymers and ingredients that play vital roles in key sectors such as coatings, construction, adhesives, and health and protection - growing markets that serve billions of end users worldwide. At our innovation centres of excellence in the UK, Germany, China, Malaysia and Ohio, USA we collaborate closely with our customers to develop new products and enhance existing ones tailored to their needs, with an increasing range of sustainability benefits.
Process / Mechanical Principal Engineer Globalpundits, IncProcess / Mechanical Principal EngineerGreenville, SCConduct construction document reviews as required Plan, organize, and coordinate process / mechanical engineering and multi-disciplined team / design projects while engaged in the planning, design and construction phases of engineering projects including project startup. Basic Job Requirements Bachelor of Science in Chemical or Mechanical Engineering with a minimum of fifteen (15) years of experience (nuclear preferred) in design, estimating, specification preparation, construction document preparation, and related phases of engineering.
Structural Engineer - Associate Level Amentum Services IncStructural Engineer - Associate LevelGreenville, SCThe Advanced Solutions Group specializes in the design, construction, and operation of unique and complex research and development facilities, including wind tunnels, aerospace, automotive, and motorsports rocket test stands, climatic chambers, jet engine test cells, acoustic chambers, altitude test facilities, captive trajectory systems, and nuclear facilities. • Develop engineering design calculation packages which may include static, dynamic, blast, vibration, and thermal stresses utilizing both hand analysis and finite element analysis.
Principal HVAC Design Engineer Edgewater Technical AssociatesPrincipal HVAC Design EngineerGreenville, South CarolinaEdgewater has a proven track record and is a trusted provider of fixed-price construction projects, engineering, and technical services for the Department of Energy (DOE), National Nuclear Regulatory Commission (NRC), Canadian Commercial Nuclear Industry, and private sector commercial contractors involved in nuclear, high-hazard, or complex operations. Founded in 2003, Edgewater Technical Associates, LLC (Edgewater) is a New Mexico-based small business headquartered in Los Alamos, NM, with five (5) regional offices across the United States to locally support our growing presence at project sites.
Environmental Engineer - Water Resources S&ME IncEnvironmental Engineer - Water ResourcesSpartanburg, SCThis position includes a mix of field and office work and requires collaboration with clients, contractors, regulators, local government officials, and internal project teams to deliver high-quality, compliant, and sustainable project solutions. About The Role: As an Environmental Engineer with a focus on Water Resources, you will leverage your technical expertise to support and lead projects for public sector, energy, industrial, government, and real estate clients.
Environmental Engineer – Water Resources S&ME, Inc.Environmental Engineer – Water ResourcesSpartanburg, SCThis position includes a mix of field and office work and requires collaboration with clients, contractors, regulators, local government officials, and internal project teams to deliver high-quality, compliant, and sustainable project solutions. As an Environmental Engineer with a focus on Water Resources, you will leverage your technical expertise to support and lead projects for public sector, energy, industrial, government, and real estate clients.
Project Engineer - Construction S&ME IncProject Engineer - ConstructionGreenville, SCS&ME is looking for a motivated and passionate Project Engineer-Project Manager to join our Energy team working on civil geotechnical, geostructural, and/or construction projects out of our Greenville-Spartanburg, South Carolina office. This role blends engineering expertise, field presence, and client interaction, giving you direct influence over project outcomes while mentoring team members and strengthening relationships across the engineering and construction community.
Lead Structural Engineer Wood PLCLead Structural EngineerGreenville, South CarolinaWith 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Design tasks mainly involve load determination, stress analysis, structural steel design using computational software design tools and hand calculations as appropriate.
Construction Materials or Geotechnical Engineer S&ME, Inc.Construction Materials or Geotechnical EngineerSpartanburg, SCS&ME is looking for a motivated and passionate Project Engineer-Project Manager to join our Energy team working on civil geotechnical, geostructural, and/or construction projects out of our Greenville-Spartanburg, South Carolina office. This role blends engineering expertise, field presence, and client interaction, giving you direct influence over project outcomes while mentoring team members and strengthening relationships across the engineering and construction community.
Geotechnical Project Engineer S&ME IncGeotechnical Project EngineerSpartanburg, SCS&ME is looking for a motivated and passionate Project Engineer-Project Manager to join our Energy team working on civil geotechnical, geostructural, and/or construction projects out of our Greenville-Spartanburg, South Carolina office. This role blends engineering expertise, field presence, and client interaction, giving you direct influence over project outcomes while mentoring team members and strengthening relationships across the engineering and construction community.
Traffic Engineers and Designers AECOMTraffic Engineers and DesignersGreenville, SCWe invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We use our extensive knowledge in planning, designing and managing transportation systems - as well as restoring and replacing aging infrastructure - to help our public and private clients find smarter, more advanced ways to move people across cities, countries and continents.