285 Results for

Design Engineer Jobs in Dahlgren, VA

Jobs

Dahlgren, VA8 days ago

Remote

Experience managing the development of Interface Control Documents (ICDs) for the mechanical hardware design and ensuring there is traceability to the Directed Energy Weapons (DEWS) Reference Architecture (RA). Experience Overall management and oversight of the work and products ensuring the mechanical development meets schedule and sufficient quality to pass performance requirements.

New!

Fredericksburg, VA2 days ago

AWS Data centers have multiple components such as generators, uninterruptable power sources, diesel generators, electrical switchgear, power distribution units, variable frequency drives, automatic/static transfer switches, chillers [air-cooled and water-cooled], pumps, cooling towers, heat exchangers, CRAHs, air economizers, etc. • Frequently visit (locally) assigned in-operation data centers to troubleshoot, meet customers, supervise vendor’s work to ensure compliance with the scope, design, SOO and applicable local codes.

New!

Fredericksburg, VA2 days ago

AWS Data centers have multiple components such as generators, uninterruptible power sources, diesel generators, electrical switchgear, power distribution units, variable frequency drives, automatic/static transfer switches, chillers [air-cooled and water-cooled], pumps, cooling towers, heat exchangers, CRAHs, air economizers, etc. • Frequently visit (locally) assigned in-operation data centers to troubleshoot, meet customers, supervise vendor’s work to ensure compliance with the scope, design, SOO and applicable local codes.

Dahlgren, VA8 days ago

Perform Failure Mode Effectiveness Analysis (FMEA), construct Failure Analysis Logic Trees (FALTs), and generate Target Vulnerability Characterizations (TVCs) in support of system-level survivability and lethality evaluations. Engineer/Vulnerability Module & Engagement Analyst (DETO-2026-24615): Bowhead seeks new team members in their support to the Navy’s Weapons Systems Munitions Integration and Hypersonic division.

Woodbridge, VA30+ days ago

$122,400–$168,300

Develops and/or leads teams in studies, plans, criteria, specifications, calculations, evaluations, design documents, performance assessments, integrated systems analysis, cost estimates, budgets, associated with the planning, design, licensing, construction, operation, and maintenance of Exelon's electric generation, transmission, distribution, gas, and telecommunication facilities/systems. We are a Fortune 200 company, 19,000 colleagues strong serving more than 10 million customers at six energy companies -- Atlantic City Electric (ACE), Baltimore Gas and Electric (BGE), Commonwealth Edison (ComEd), Delmarva Power & Light (DPL), PECO Energy Company (PECO), and Potomac Electric Power Company (Pepco).

Dahlgren, VA8 days ago

Remote

We will be looking to hire a mid level( 5 years of experience, and a SR level candidate, ten (10) years experience in electromagnetic system design, analysis and test with U.S. Navy/Joint DE systems including pulsed power, RF, Laser, and CIED systems and components. The Electrical Engineer will design, develop, test, and supervise the manufacturing of electrical and electronic equipment for electronic warfare systems.

New!

Dahlgren, VAToday

As an Cisco ISE Administrator, you will identify endpoints, and enable the creation and enforcement of security and access policies for endpoint devices connected to the company’s routers and switches, in order to simplify identity management across diverse devices and applications. Bowhead is seeking a Cisco Identity Services Engineer (ISE) Administrator to provide Design and Engineering Operation and Maintenance support for ISE systems on the classified and unclassified Research, Development, Test and Evaluation (RDTE) networks at Dahlgren, VA.

California, MD12 days ago

$87,000–$154,000

Perform other job assignments and duties as directed by management or pursuant to company policy, including but not limited to emergency response, departmental coverage, call outs, and support of outage activities in positions outside the department. Now integrated with Calpine, our portfolio includes 55 gigawatts of capacity from nuclear, natural gas, geothermal, hydro, wind and solar facilities, with the generating capacity to power the equivalent of 27 million homes.

New!

Dahlgren, VA5 days ago

Conduct system integration tests, qualification tests, and environmental tests to assess system performance, reliability, and compliance with customer specifications. Demonstrated experience in one or more of the following specific knowledge areas (as stated in the technical instruction): 1) Radio frequency hardware design and/or fabrication.

New!

Manassas, VA6 days ago

$57.69–$67.30 Per Hour

By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from HEPCO, Inc and its affiliates, and contracted partners. This role is responsible for ensuring reliable, secure, and compliant system performance while supporting real-time operations and infrastructure.

Manassas, VA29 days ago

$46–$48 Per Hour
Temporary
Contractor
Full-time

While an hourly range is posted for this position, an eventual hourly rate is determined by a comprehensive salary analysis which considers multiple factors including but not limited to: job-related knowledge, skills and qualifications, education and experience as compared to others in the organization doing substantially similar work, if applicable, and market and business considerations. Our dedicated CWL and MTWS team collaborates closely with the Navy, internal production teams, and industry partners to ensure the flawless delivery and operation of these critical systems in laboratory and submarine environments.

New!

Stafford, VA2 days ago

Bachelor’s degree in Mechanical Engineering, Electrical Engineering, Construction Management and 14+ years of relevant experience or an equivalent engineering science degree *OR * 18 years of related construction management experience *in lieu* of a degree. -10+ years of relevant experience *constructing *electrical engineering systems including large scale power distribution/generation gear and constructing mechanical engineering systems including cooling systems.

New!

Manassas, VA2 days ago

In this role, you will take ownership of major structural design deliverables, collaborate deeply with multidisciplinary teams, and help ensure the aircraft's structures meet performance, safety, manufacturability, and certification goals. At Electra, we're pioneering sustainable aviation through the development of hybrid-electric Ultra Short Takeoff and Landing (eSTOL) aircraft designed to transform regional mobility.

Fort Belvoir, VA21 days ago

The System Engineer works with operational units, program offices, and industry partners to assess technical feasibility of new capabilities, assess performance through experimentation, and support transition of capabilities to PAE portfolios. Provide engineering expertise supporting evaluation and integration of emerging technologies into operational Army environments.

Dahlgren, VA30+ days ago

Performing extensive research and complex analysis on a major project to enhance the technical and economic development of the product and/or service Completed reports or studies may be deliverable engineering products to the customer. Scientific Research Corporation is an advanced information technology and engineering company that provides innovative products and services to government and private industry, as well as independent institutions.

Dahlgren, VA18 days ago

Job TypeFull-timeEducationBachelor's DegreeCareer LevelExperienced (Non-Manager)CategoryEngineeringJob DescriptionEPS is seeking a dedicate Mechanical Engineer support programs The ideal candidate will have significant experience obtained in or comparable DoD environment in the areas of design, fabrication, and integration of mechanical systems or similar systems, including leading of a team of mechanical engineers. Desired Skills/Other ConsiderationsBachelor’s degree from an accredited college or university in an engineering, scientific, or technical discipline, and; • Eight (8) years of experience in the areas of mechanical design and engineering including the design, manufacture, and testing of mechanical assemblies to prove operation of design.

Manassas, VA30+ days ago

$160,000–$200,000 Per Year

At Electra, we're pioneering sustainable aviation by developing hybrid-electric Ultra Short Takeoff and Landing aircraft designed to transform regional air mobility, by making air travel more efficient, quieter, and environmentally friendly. Able to operate from soccer field-sized spaces, our Ultra Short unlocks a new era of aviation through what we call Direct Aviation - the next level of connectivity bringing air travel closer to where we live, work, and play.

Manassas, VA30+ days ago

$142,696–$158,303 Per Year

As a mechanical engineer for the Progeny Systems EW business area, you’ll lead a cross functional team responsible for the mechanical engineering solutions that are needed to deliver cutting edge EW capabilities to our US Navy submarine fleet. General Dynamics Mission Systems (GDMS) engineers a diverse portfolio of high technology solutions, products and services that enable customers to successfully execute missions across all domains of operation.

Quantico, VA30+ days ago

Johnson, Mirmiran & Thompson is a dynamic, 100% employee-owned consulting firm with more than 2,800 professionals, providing a full range of multidisciplinary engineering, architecture, information technology, and related services to public agencies and private clients throughout the United States. The position provides mechanical engineering assistance for design and construction projects using knowledge of design principles and practices to interpret, organize, coordinate, communicate and execute.

Indian Head, MD30+ days ago

Full-time

Applied Research Associates, Inc. is currently seeking Junior Mechanical Engineers for a growing list of projects involving modernization of energetic materials production facilities, munitions production, and novel production system design. Applied Research Associates, Inc. is a 100% employee-owned international research and engineering company recognized for providing technically superior solutions to complex and challenging problems in the physical sciences.

King George, VA30+ days ago

The ideal candidate has a strong mechanical aptitude, familiarity with engineering drawings and quality assurance techniques, organizational skills, in depth experience with precision machining operations, and the ability to work in a fast-paced environment. Strong organizational and time management skills with the ability to independently drive tasks and lead support staff or cross-functional teams to successful completion.

Manassas, VA21 days ago

This role will lead the development, selection, testing, and certification of advanced materials and processes for Electra's 9-passenger hybrid-electric eSTOL (electric short takeoff and landing) aircraft. Electra's Ultra Short aircraft will revolutionize air travel by bringing it closer to where we live, work, and play, making new connections possible.

New!

Stafford, Virginia5 days ago

The ideal candidate is comfortable interpreting complex Technical Data Packages (TDPs) and collaborating with cross‑functional teams and suppliers to resolve technical issues. Our client is seeking a hands‑on Manufacturing Engineer to support New Product Introduction (NPI), process development, and production readiness for electro‑mechanical systems.

Manassas, VA21 days ago

At Electra, we're pioneering sustainable aviation by developing hybrid-electric Ultra Short Takeoff and Landing aircraft designed to transform regional air mobility by making air travel more efficient, quieter, and environmentally friendly. Electra is seeking a motivated Multidisciplinary Engineer with a focus on Flight Controls and Aircraft Systems to support the development, integration, and testing of aircraft systems across our hybrid-electric Ultra Short program.

Manassas, VA30+ days ago

About Electra:At Electra, we're pioneering sustainable aviation by developing hybrid-electric Ultra Short Takeoff and Landing aircraft designed to transform regional air mobility, by making air travel more efficient, quieter, and environmentally friendly. Able to operate from soccer field-sized spaces, our Ultra Short unlocks a new era of aviation through what we call Direct Aviation - the next level of connectivity bringing air travel closer to where we live, work, and play.

Manassas, VA15 days ago

Our Ultra Short technology unlocks thousands of new operating locations and enables what we call Direct Aviation: quiet, point-to-point regional travel that gets people from where they are to where they want to go, without the congestion of major airports or the noise of conventional aviation. As our Principal Manufacturing Engineer – Primary Structures, you'll take on one of the most consequential roles in the EL9 build: owning manufacturability and integration for major load-bearing structures - fuselage, wing, empennage, and primary structural assemblies.

Manassas, VA30+ days ago

This role is responsible for translating engineering outputs - including aircraft performance, fuel and energy burn, operating cost, noise footprint, and takeoff and landing capability - into fast, credible, and customer-ready analysis tools that support repeatable sales execution. Electra.aero is seeking an experienced Sales Engineer to develop and own Electra's performance and operating economics sales tools and to lead customer-specific use-case analysis in support of aircraft sales and early deployments.

Manassas, VA15 days ago

Our Ultra Short technology unlocks thousands of new operating locations and enables what we call Direct Aviation: quiet, point-to-point regional travel that gets people from where they are to where they want to go, without the congestion of major airports or the noise of conventional aviation. A global company, headquartered in Manassas, VA, Electra is backed by Lockheed Martin, Honeywell, and Safran, has filed for FAA Part 23 type certification, and carries 2,000+ intent to purchase from operators worldwide.

Manassas, VA15 days ago

Our Ultra Short technology unlocks thousands of new operating locations and enables what we call Direct Aviation: quiet, point-to-point regional travel that gets people from where they are to where they want to go, without the congestion of major airports or the noise of conventional aviation. Working within our Integrated Product Development Team (IPDT) and alongside internal and external manufacturing partners, you'll apply Design for Manufacturing (DFM) principles to build efficient, repeatable, cost-effective fabrication processes from the ground up.

Manassas, VA21 days ago

You will work closely with airframe, stress, flight physics, test, and propulsion teams to ensure accurate definition of static and dynamic environments, supporting safe, and certifiable airframe and systems designs. Electra is seeking a Senior Loads & Dynamics Engineer specializing in vibrations and acoustics to lead the development, analysis, and validation of structural loads and dynamic environments for our nine-passenger EL9 hybrid-electric aircraft.

New!

Stafford, Virginia4 days ago

Develop Informational Briefs and provide results to the Government in time to support the schedule associated with each task; Represent the Program Office on site and provide the primary communication conduit for engineering issues related to the Depot PoP and Inspect and Repair Only As Necessary (IROAN) of Amphibious Combat Vehicles (ACV) (manufacturing processes; plant operations; production quality). The Mechanical Engineer will: Review, develop, and comment on technical documentation (requirements, CAD files, test plans/reports, technical review documents, engineering change documents); Conduct technical analyses, and attend design and Engineering Change Proposal (ECP) reviews; Witness the integration of hardware onto the platforms and the execution of tests, and review test plans and reports.

Dahlgren, Virginia22 days ago

$100–$110 Per Hour

A Bachelor’s degree from an a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineering curriculum in one of the following fields: Mechanical Engineering, Electrical Engineering, Computer Engineer, Electronics Engineering; or A Bachelor’s degree from an accredited college or university in one of the following fields of study: Mathematics, Computer Science, or Physics. Demonstrated capability in packaging and communicating data products for effective communication (i.e. putting together information suitable for a Senior Executive Service/Flag-level Briefing).

New!

Stafford, Virginia4 days ago

Business Development: Assist with Business Development activities as required to support Millennium's strategic business objectives, which may include but not limited to participation in technical interviews, creation of technical documentation, general proposal writing support and proposal color reviews. This partnership strengthens our ability to deliver results by expanding our technical depth, operational reach, and access to a broader bench of proven experts, ensuring our customers continue to receive best-in-class cybersecurity support.

Fredericksburg, VA30+ days ago

Create content and provide training to Kaeser partners or external customers on portable compressor topics -- whether in person via training class, via phone or via other media (such as a webinar), or through technical papers. The creativity, commitment, passion and diversity of our employees make a real difference to the success of our company, moving Kaeser forward as the fastest growing and most successful compressor company in the U.S.

Dahlgren, VA30+ days ago

Plan and execute engineering strategies in accordance with approved project acquisition strategies and plans: + Perform requested aspects of technical analysis and systems engineering support to facilitate aspects of architecture design, interoperability, specification analysis and development, solutions implementation and systems sustainment of supported project. + Support signal processing activities, to include waveform, clutter management and electronic protection development; designing electronic compatibility into systems; and supporting data collection and analysis to determine effectiveness of signal processing systems.

Manassas, VA30+ days ago

At Electra, we're pioneering sustainable aviation by developing hybrid-electric Ultra Short Takeoff and Landing aircraft designed to transform regional air mobility, by making air travel more efficient, quieter, and environmentally friendly. The Principal Systems Test Engineer will serve as a technical authority for test setup, execution, and data analysis, while driving Electra's test capability development and guiding teams across all test lab environments.

Manassas, VA15 days ago

Our Ultra Short technology unlocks thousands of new operating locations and enables what we call Direct Aviation: quiet, point-to-point regional travel that gets people from where they are to where they want to go, without the congestion of major airports or the noise of conventional aviation. A global company, headquartered in Manassas, VA, Electra is backed by Lockheed Martin, Honeywell, and Safran, has filed for FAA Part 23 type certification, and carries 2,000+ intent to purchase from operators worldwide.

New!

Stafford, Virginia5 days ago

The ideal candidate has experience interpreting electrical documentation, developing test processes, supporting PCBA manufacturing, and collaborating with cross‑functional teams and suppliers to resolve technical challenges. Our client is seeking a hands‑on Manufacturing Engineer with a strong electrical engineering background to support New Product Introduction (NPI), electrical test development, and production readiness for electronic and electro‑mechanical systems.

New!

Stafford, VA5 days ago

Seeking a hands-on and versatile Manufacturing Engineer with a strong background in electro-mechanical systems to support New Product Introduction (NPI) and provide technical guidance throughout the product lifecycle. The ideal candidate will be comfortable interpreting complex technical data packages and collaborating with cross-functional teams and suppliers to resolve technical queries.

Dahlgren, Virginia30+ days ago

Demonstrates ability to independently handle and lead a range of directed tasks and problems, such as establishing project objectives, evaluating alternatives, selecting approach for meeting requirements and resolving technical problems, with minimal guidance from program management and/or program technical leads. Ability to meet deadlines under pressure: Setting priorities for your own work in order to meet a deadline, coordinating work with other units in order to meet a deadline and setting work priorities and determining work assignments for other workers in order to meet a deadline date.

New!

Manassas, VAToday

$0.75–$1.25 Per Hour

Experience dealing with multiple disciplines, such as contractors, consultants, engineers and end-users; work as a liaison with other members of the sales team and technical support to solve client problems. Seeking candidates with a minimum five years' sales or project management experience in electric power generation or related field; Mechanical or Electrical Engineering Degree, preferred.

Stafford, VA30+ days ago

$90,000–$125,000 Per Year

You will interface daily with engineers, production technicians, quality, supply chain, and program leadership to build repeatable processes, optimize assembly workflows, resolve build issues, and ensure that all aircraft, avionics, wiring harnesses, and mechanical subsystems integrate seamlessly. This role is ideal for someone who thrives in a fast-moving defense manufacturing environment where requirements evolve quickly, engineering data may be incomplete, and the team relies heavily on practical engineering judgment, root-cause analysis, and cross-functional collaboration.

California, CA30+ days ago

$80,000–$133,000 Per Year

For candidates in California and the New York metro, the Target Base Pay Range is $88,000.00 - $146,000.00, to reflect the cost of living and market conditions in those areas. Projects are led with engagement with manufacturing teams, identifying and developing, executing site tactical and continuous improvement equipment-related projects.

Stafford, VA30+ days ago

The ideal candidate will have experience with PCBA design interpretation, electrical test development, and production support, and will collaborate with cross-functional teams and suppliers to resolve technical challenges. This role bridges the gap between electrical design and production, ensuring that manufacturing and test processes for electronic and electro-mechanical systems are robust, scalable, and aligned with product requirements.

Quantico, Virginia30+ days ago

$80,000–$128,000 Per Year

Manassas, VA30+ days ago

Full-time

While performing the duties of this job, the employee works in a both an office environment and on or near the shop floor where there may be moving mechanical parts with occasional exposure to the risk of electrical shock, outdoor weather conditions, fumes or airborne particles, and toxic or caustic chemicals. Process releases through Microvellum, saw optimization and CAM software; annotate as built drawings, and print & release reports and drawings for production.

New!

Stafford, VA4 days ago

The ideal candidate will have experience with PCBA design interpretation, electrical test development, and production support, and will be comfortable collaborating with cross-functional teams and suppliers to resolve technical challenges. Our client is seeking - a hands-on and versatile Manufacturing Engineer with a strong electrical engineering background to support New Product Introduction (NPI) and provide technical leadership across the product lifecycle.

Dahlgren, Virginia28 days ago

Specialized experience shall also include experience as an electrical engineer performing electrical engineering analysis and design, in electrical engineering software tools, coordinating electrical fabrication, and electrical engineering test techniques. Beware of employment scams—Sabre Systems will never request payment, extend offers without an interview, or contact you from an email that doesn’t end in @sabresystems.com; always apply directly at https://careers.sabresystems.com/.

Dahlgren, VA30+ days ago

Support fast paced, data intensive environment to include IPTs, international meetings, technical interchange sessions, working groups and program reviews focused on delivering a combat ready BMD ship. BecTech is looking for a talented and experienced AEGIS Weapon System Aegis System Equipped Vessel Senior Systems Engineer for a current position in the Missile Defense Agency.

New!

Stafford, Virginia4 days ago

Experience in drafting, reviewed, and provided input to various technical documentation (DLA Form 339s, CAD files, ECP documents, test plans and reports, engineering processes and procedures, and technical review documents) to address sustainment issues and identify technical risks. Conduct technical analyses, and attend design and Engineering Change Proposal (ECP) reviews; Witness the integration of hardware onto the platforms and the execution of tests, and review test plans and reports; Develop Informational Briefs and provide results of modification tasks.

Stand out to leading employers.

Upload your resume and let employers find you for new Design Engineer job openings. Plus, receive relevant job matches delivered straight to your inbox.

Design Engineer Jobs in Dahlgren, VA

Jobs

Mechanical EngineerBowhead / UIC Technical Services

Data Center Controls Engineer, ServiceAmazon Data Services, Inc.

Data Center Controls Engineer, DeploymentAmazon Data Services, Inc.

Engineer/Vulnerability Module & Engagement AnalystBowhead / UIC Technical Services

Prin Engineer (Underground Transmission)Exelon

Electrical EngineerBowhead / UIC Technical Services

Cisco Identity Services Engineer/AdministratorBowhead / UIC Technical Services

EngineerConstellation Energy

RADAR Engineer/ScientistBowhead / UIC Technical Services

SCADA Engineer (On-site)HEPCO, Inc.

Senior Engineering Support Specialist - Weapons Launcher Test EngineerThe Computer Merchant, LTD.

Senior Construction Manager , AWS DCCD AMER SEAmazon Data Services, Inc.

Senior Airframe Design EngineerElectra

System EngineerPZI International

Sr Mechanical EngineerScientific Research Corporation

SR MECHANICAL ENGINEEREPS Corporation

Principal Mechanical Systems Engineer (Aerospace)Electra

Sr Advanced Mechanical Engineer supporting Submarine Electronic Warfare ApplicationsGeneral Dynamics Mission Systems, Inc

Senior Mechanical Engineer (Top Secret Clearance Required)Johnson, Mirmiran & Thompson

Junior Mechanical EngineerApplied Research Associates, Inc

Mechanical Engineer - Test and EvaluationBowhead / UIC Technical Services

Senior Materials, Process, & Test EngineerElectra

Manufacturing Engineer – Electro-Mechanical Systems & NPIConfidential Recruiting Partners

Multidisciplinary Engineer - Flight ControlsElectra

Principal Battery Systems Integration Engineer (Aerospace)Electra

Principal Manufacturing Engineer - Primary StructuresElectra

Sales EngineerElectra

Lead Flight Test Instrumentation EngineerElectra

Senior Manufacturing Engineer – Sheet Metal FabricationElectra

Senior Loads & Dynamics Engineer – Vibrations & AcousticsElectra

Mechanical EngineerMillennium Corporation

Radar Systems Engineer, SeniorAstrion

Systems Engineer (Mechanical/Electrical)Millennium Corporation

Product Engineer - Air TreatmentKaeser

Radar Engineer/Scientist SeniorV2X

Principal Systems Test Engineer (Aerospace)Electra

Senior Instrumentation EngineerElectra

Manufacturing Engineer – Electronics, PCBA & NPIConfidential Recruiting Partners

Manufacturing EngineerCivil Recruit

Electrical Engineer, LeadAMERICAN SYSTEMS

SALES ENGINEERCarter Machinery Company, Inc

Manufacturing EngineerAscend Recruiting Partners

Project EngineerPharmavite

Manufacturing Electrical EngineerAscend Recruiting Partners

Data Center Facility EngineerPeraton

Drafter/Submittal EngineerUSAM DC

Manufacturing EngineerUpcoresolutions

Sr. Electrical EngineerSabre Systems LLC

Senior Systems EngineerBasic Engineering Concepts & Technologies Inc DBA BecTech Inc

Sustainment Engineer- (Mechanical)Millennium Corporation

Similar Job Searches