Reliability Engineer *US AMR-Jones Lang LaSalle Americas, Inc.Reliability EngineerSan Diego, CABusiness, Communication, Computerized Maintenance Management Systems (CMMS), Construction, Construction Projects, Continuous Improvement, Corrective and Preventive Action (CAPA), Cost Savings, Customer Follow-Ups, Facility Management, Failure Analysis, Failure Investigation, Maintenance Strategy, Operating Costs, People Management, Planning, Planning Ability, Predictive Maintenance, Problem Solving, Regulatory Compliance, Reliability Centered Maintenance (RCM), Root Cause Failure Analysis (RCFA), Technical Knowledge, Thermography, Vibration Analysis. Performs/supports operational event and equipment failure investigations to ensure that the root cause/causal factors have been identified, corrective actions prescribed, and follow-up monitoring conducted as applicable, to determine effectiveness.
Manufacturing Engineer Butler America AerospaceManufacturing EngineerChula Vista, CA$75–$90 / hourContractorThis role ensures products are built efficiently, safely, and in compliance with quality, cost, and delivery targets while supporting continuous improvement initiatives across the manufacturing environment. The Manufacturing Engineer supports production operations by developing, optimizing, and maintaining manufacturing processes, tools, and workflows.
Data Engineer GCR Professional ServicesData EngineerSan Diego, ConnecticutContractorOur laser-produced plasma (LPP) system combine high-power lasers, advanced optics, plasma-based EUV generation, sensing, controls, and physics-based modeling to address some of the most complex challenges in semiconductor manufacturing. Working closely with lab owners and experimental, modeling, and ML scientists, you will build and improve data pipelines, integrate diverse data sources, and enable reliable access to research data at scale.
Senior Robotics Automation Engineer Daiichi Sankyo, Inc.Senior Robotics Automation EngineerSan Diego, CA$136,080–$204,120 / yearFull timeEvaluate, integrate, configure, troubleshoot, and maintain advanced laboratory automation systems, including liquid handlers, dispensers, pipettors, plate movers, robotic arms, plate sealers and desealers, acoustic transfer devices, multimodal assay readers, incubators, storage systems, and related scientific instrumentation. This role requires deep expertise in laboratory automation, engineering principles, scientific workflows, and biopharma research operations, combined with the ability to influence technical direction, guide cross-functional decision-making, and mentor less experienced engineers and scientists.
NewFacility Engineer - Life Sciences US AMR-Jones Lang LaSalle Americas, Inc.Facility Engineer - Life SciencesSan Diego, CAWhat your day-to-day will look like: Lead comprehensive engineering assessments and develop strategic capital planning roadmaps for life sciences facilities ranging from research laboratories to manufacturing operations. You will serve as the primary technical authority for multi-million dollar facility portfolios, collaborating with cross-functional teams to deliver innovative engineering solutions that advance our clients' scientific missions.
Continuous Improvement Engineer Winchester Interconnect CorporationContinuous Improvement EngineerSan Marcos, CATo ensure measurable success, the role is tasked with defining and tracking critical operational KPIs-such as Overall Equipment Effectiveness (OEE), Cycle Time, and Scrap Rates-to drive data-driven decision-making and operational excellence. Your responsibilities will include gathering and analyzing data, creating ROI projections, building fixtures, adjusting Production lines, creating work instructions, and developing detailed project timelines.
Engineer I/ II - Capital Improvement Projects City of EncinitasEngineer I/ II - Capital Improvement ProjectsEncinitas, CA$98,176–$155,355.20 / yearSkill in: Prioritizing work; Using computers and related software applications; Providing customer service; Managing multiple priorities simultaneously; Performing mathematical calculations; Preparing and/or reviewing a variety of technical reports, documents, and other related correspondence; Preparing and interpreting maps, drawings, legal descriptions, and plats; Reading and reviewing engineering drawings and technical reports; Applying Federal, Regional, State, and Local regulations; Issuing professional opinions; Developing Requests for Proposals and Requests for Qualifications; Performing engineering calculations; Reading and writing legal descriptions; Communication, interpersonal skills as applied to interaction with coworkers, supervisor, the general public, etc. Develops and reviews engineering plans, construction plans, specifications, contracts, documents, and technical and engineering reports; reviews changes to construction to determine feasibility of proposed alternative design; recommends approval or denial of plans/revisions and/or recommends alternations prior to continuation of construction.
Process Improvement Specialist Booz Allen Hamilton IncProcess Improvement SpecialistSan Diego, CA$77,600–$176,000 / yearYou'll design data collection plans, facilitate workshops, and communicate your research and illustrative analysis using root cause analysis, SIPOC charts, fishbone diagrams, failure mode effect analyses, trend analysis, or future state models to help establish understanding and agreement from key stakeholders. Onsite: If this position is listed as onsite, work will primarily be performed at a Booz Allen office or customer facility, where employees will collaborate directly with colleagues and customers as required by the role.
Senior Lean Engineer nVent Electric Inc.Senior Lean EngineerSan Diego, CAWe offer a comprehensive range of systems protection and electrical connections solutions across industry-leading brands that are recognized globally for quality, reliability and innovation. Our robust portfolio of leading electrical product brands dates back more than 100 years and includes nVent CADDY, ERICO, HOFFMAN, ILSCO, SCHROFF and TRACHTE.
Manufacturing Engineer Apollo Professional SolutionsManufacturing EngineerChula Vista, GAKey Day-to-Day Responsibilities: Manufacturing Engineer Design & Producibility: Evaluate designs during reviews to resolve producibility issues and define tooling philosophy. This role ensures products are built efficiently, safely, and in compliance with quality, cost, and delivery targets while supporting continuous improvement initiatives across the manufacturing environment.
Quality Engineer II ResoneticsQuality Engineer IISan Diego, California$70,304–$102,000 / yearFull timeThe Quality Engineer position uses Quality Engineering techniques including: Problem solving using Lean Six Sigma methodology, Process Validations and Verifications, Process Development and optimization, Gage R&R, and reducing dependence on inspection along with ISO 13485 and/or 21CFR820 compliance. As a lead Quality Engineer on development projects, directly contribute and/or provide guidance to others to establish appropriate Design History File / Device Master Record documentation and provide detailed planning for product builds.
Aerospace- Senior Supplier Quality Engineer (PCBA) TRIGO ADR AmericasAerospace- Senior Supplier Quality Engineer (PCBA)San Diego, CA$95,000–$120,000 / yearAdditional Qualifications (Preferred): Present information in one-on-one and small group situations to customers, clients, and other employees of the organizationSupervise, direct, and motivate othersManage / Lead manufacturing readiness auditsManage / Lead process improvement activitiesLead risks assessments and mitigation activitiesDirect the establishment of quality walls or other containment mechanismsSteer / guide training improvement and implementationRead and comprehend instructions, correspondence, and memoPrioritize and escalate matters to leadership as appropriateEnsure proper authorization and documentation for disbursementsMaintain confidentiality of company documents and recordsEstablish and maintain effective working relationshipsPass pre-hire background check WORKING CONDITIONS Productivity : Incumbents must perform work in an efficient, effective, and timely manner with minimal direction. Cross-Functional Collaboration: Interact daily with other functions such as technical support, engineering, facilities, production control, and finance to meet organizational goals Strategic Planning: Develop and implement strategic plans, including creating current and future state value stream maps.
Quality Engineer ARCH Medical Solutions CorpQuality EngineerEscondido, CAThis position plays a critical role in ensuring customer satisfaction, reducing internal scrap, driving continuous improvement initiatives, and supporting product and process validations. Through advanced manufacturing capabilities, technical expertise, and a strong commitment to quality, we help our customers bring innovative products to market with confidence.
Quality Engineer III HME CareersQuality Engineer IIICarlsbad, CaliforniaProvides technical support as it pertains to Quality Engineering to the product line(s) and assigned projects, including NPD (new product development) throughout the product life cycle; ensuring the highest levels of product quality are maintained. Works on problems of diverse scope where analysis of information requires evaluation of multiple factors, using analytical, critical thinking, sound judgment, and problem-solving techniques to identify the root cause.
Senior Quality Engineer-Operations-CA Synchron IncSenior Quality Engineer-Operations-CASan Diego, CA$130,000–$150,000 / yearAs Senior Quality Engineer (Operations), you will serve as the Quality lead supporting Synchron's manufacturing operations, contract manufacturers, and supplier network to ensure products are manufactured safely, consistently, and in compliance with applicable regulatory requirements. You will partner closely with Manufacturing Engineering, Supply Chain, Operations, and R&D to establish robust manufacturing processes, support design transfer activities, and drive continuous improvement across production operations.
Manufacturing Engineer Shop Floor / Operations Yantran LLCManufacturing Engineer Shop Floor / OperationsSan Diego, CARequired Qualifications: Bachelor’s degree in Manufacturing Engineering, Mechanical Engineering, Aerospace Engineering, or a related field; hands-on experience supporting shop floor manufacturing operations; strong understanding of production processes, process control, root-cause analysis, and problem-solving techniques; experience working in a fast-paced, highly regulated industrial or aerospace environment; strong collaboration and communication skills. Preferred Qualifications: Experience in aerospace or FAA-regulated manufacturing environments; exposure to lean manufacturing, Kaizen, or continuous improvement programs; familiarity with production support in environments involving flight hardware.
Manufacturing Engineer Project Support Yantran LLCManufacturing Engineer Project SupportSan Diego, CAKey Responsibilities: Support manufacturing deliverables for current projects, including process definition, readiness planning, and issue resolution; coordinate with project managers, operations, quality, and engineering teams to ensure timely execution of project milestones; develop and maintain manufacturing documentation including work instructions, process plans, and related technical records; identify and resolve production issues affecting schedule, quality, or readiness; participate in risk tracking, action item closure, and continuous improvement initiatives related to project execution. Required Qualifications: Bachelor’s degree in mechanical engineering, Manufacturing Engineering, Aerospace Engineering, or a related discipline; experience in manufacturing engineering within aerospace or another highly regulated industry; working knowledge of manufacturing processes, production support, engineering changes, and quality systems; demonstrated ability to work effectively in a cross-functional project environment; strong analytical, problem-solving, and communication skills.
Senior Manufacturing Engineer – Advanced Semiconductor Systems ASMLSenior Manufacturing Engineer – Advanced Semiconductor SystemsSan Diego, CaliforniaAs a Senior Manufacturing Engineer, you will drive process development, optimization, and sustainment in a high-tech manufacturing environment, ensuring stable, capable, and cost-efficient processes from early design through volume production. This posting includes three positions, each supporting a specific manufacturing area: New Product Introduction (NPI) , Top-Level System Integration, Solid State Pulse Power Module (SSPPM), and Optics .
Industrial Engineer Qualcomm IncIndustrial EngineerSan Diego, CA$81,400–$122,000 / yearCross-Functional Alignment: Partner with Facilities/QREF, IT/Networking, EHS, and lab operations to validate requirements, align on implementation approaches, and ensure code/safety considerations are addressed. Bachelor's degree in Industrial Engineering, Mechanical Engineering, Electrical Engineering, Facilities Engineering, Industrial Architecture or a related field (or equivalent practical experience).
Principal Manufacturing Engineer Laird R&F ProductsPrincipal Manufacturing EngineerCarlsbad, CaliforniaThe Carlsbad, CA site is looking to fill a Principal Manufacturing Engineer role that provides site manufacturing support for day-to-day operations, support integration of Process Safety Management (PSM) and new equipment into the site, tool and equipment design support, and other process support to the factory. At Qnity Electronics , we are working on things that matter, whether it’s providing clean water to more than a billion people on the planet, producing materials that are essential in everyday technology devices from smartphones to electric vehicles, or protecting workers in this global pandemic.
Product Systems And Manufacturing Engineer Fuse IntegrationProduct Systems And Manufacturing EngineerSan Diego, CA$75,000–$110,000 / yearFuse Integration is looking for an energetic and detail-oriented Product Systems & Manufacturing Engineer is the technical owner for assigned aerospace and defense electronic products across their lifecycle—from requirements and architecture through NPI, production, and sustainment. We are a technology firm creating in-house software, network, and hardware solutions that support our noble cause of advancing warfighter capabilities with elegant, user-focused communications, networks, and software systems. .
Senior Manufacturing Engineer – Solid State Pulse Power Module (SSPPM) ASMLSenior Manufacturing Engineer – Solid State Pulse Power Module (SSPPM)San Diego, CaliforniaIndividual pay is determined through interviews and an assessment of several factors that that are unique to each candidate, including but not limited to job-related skills, relevant education and experience, certifications, abilities of the candidate and pay relative to other team members. To be successful as a Manufacturing Engineer at ASML, you need: Bachelor’s degree or higher in Mechanical Engineering, Electrical Engineering, Industrial Engineering, or a related field.
Night Shift Manufacturing Engineer - CWW ASMLNight Shift Manufacturing Engineer - CWWSan Diego, CaliforniaIndividual pay is determined through interviews and an assessment of several factors that that are unique to each candidate, including but not limited to job-related skills, relevant education and experience, certifications, abilities of the candidate and pay relative to other team members. As an on-Shift Manufacturing Engineer, you will need: Bachelor’s Degree in Mechanical Engineering, Electrical Engineering, Computer Engineering or related engineering degree.
Manufacturing Engineer ZobilityManufacturing EngineerChula Vista, CAThis role ensures products are built efficiently, safely, and in compliance with quality, cost, and delivery targets while supporting continuous improvement initiatives across the manufacturing environment. The Manufacturing Engineer supports production operations by developing, optimizing, and maintaining manufacturing processes, tools, and workflows.
Quality Engineer Actalent IncQuality EngineerCarlsbad, CA$94,800–$126,400 / yearThis role investigates product and manufacturing quality issues, drives root cause analysis and corrective actions, and partners closely with cross-functional teams to improve quality, reliability, and performance. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing winner for both client and talent service.
Manufacturing and Automation Engineer Nordic NaturalsManufacturing and Automation EngineerVista, California$124,000–$136,000 / yearLead automation, controls, and systems engineering initiatives across manufacturing and packaging operations, including compounding, encapsulation, capsule drying, sorting, capsule bottling, liquid filling, labeling, cartoning, case packing, palletizing, and future manufacturing and packaging technologies. The role partners closely with Production, Maintenance, Engineering, Quality, Validation, and Supply Chain teams to ensure manufacturing systems operate safely, reliably, and efficiently while supporting future capacity expansion and technological advancement.
Principal, Corporate Quality Engineer Chromalloy Gas TurbinePrincipal, Corporate Quality EngineerSan Diego, CAStrong working knowledge of AS9100, ISO 9001, Nadcap, FAA Part 145, and FAA Part 21 PMA.Proven track record leading investigations, RCCA/CAPA, audits, and cross-site quality projects. Bachelor's degree in Engineering (Aerospace, Mechanical, Industrial, Quality, or related).8+ years in aerospace quality, manufacturing/repair station quality, quality systems, or supplier quality.
Quality Engineer II Resonetics, LLCQuality Engineer IISan Diego, CA$70,304–$102,000 / yearThe Quality Engineer position uses Quality Engineering techniques including: Problem solving using Lean Six Sigma methodology, Process Validations and Verifications, Process Development and optimization, Gage R&R, and reducing dependence on inspection along with ISO 13485 and/or 21CFR820 compliance. As a lead Quality Engineer on development projects, directly contribute and/or provide guidance to others to establish appropriate Design History File / Device Master Record documentation and provide detailed planning for product builds.
Engineer II General AtomicsEngineer IIPoway, CAJOB DUTIES AND RESPONSIBILITES: Devises new approaches to resolve unusual or highly complex manufacturing problems through early, upfront design-for-manufacturing (DFM) principles to ensure producibility, inspectability, testability, maintainability and repairability. Function spans from the early design development process, through pre-production pathfinder and validation test articles leading to stable production; influencing the product and process specifications to achieve the best quality, cost and cycle time.
Legal Process Engineer Cooley LLPLegal Process EngineerSan Diego, CA$103,000–$150,000 / yearTo that end, under the direction of the Associate Director, Legal Practice Engineering, the Legal Process Engineer will play a critical role at the intersection of legal domain expertise, process engineer, and digital product development, working directly with the firm's practitioners across offices and practice areas to uncover, analyze, and re-design legal workflows. Position responsibilities: • Lead workflow discovery efforts in direct partnership with practice groups and Knowledge Management attorneys, capturing end-to-end legal workstreams across corporate, regulatory, and transactional domains, including those that impact external stakeholders such as clients and their directors, officers, and investors.
Manufacturing Engineer III ResoneticsManufacturing Engineer IIISan Diego, California$70,304–$102,000 / yearFull timeIf qualifying by Bachelor's degree, must have: 5 years of experience using engineering tools, processes, methodologies, and systems within business unit specific areas such as laser application development and sustaining manufacturing, including demonstrated experience in lean and six sigma concepts and tool application; 5 years of experience with QSR or ISO 13485; 5 years of experience in application of Lean/CI Principles, Systems and common tools, including Line Balancing, Equipment Capacity modeling, 5S, 8 forms of waste, Value Stream Maps, Kaizen, WIP optimization, manufacturing cell-line facility layout design & optimization, and data analysis. If qualifying by Master's degree, must have: 3 years of experience using engineering tools, processes, methodologies, and systems within business unit specific areas such as laser application development and sustaining manufacturing, including demonstrated experience in lean and six sigma concepts and tool application; 3 years of experience with QSR or ISO 13485; 3 years of experience in application of Lean/CI Principles, Systems and common tools, including Line Balancing, Equipment Capacity modeling, 5S, 8 forms of waste, Value Stream Maps, Kaizen, WIP optimization, manufacturing cell-line facility layout design & optimization, and data analysis.
Manufacturing Yield & Device Analytics Engineer Noveon MagneticsManufacturing Yield & Device Analytics EngineerSan Marcos, CaliforniaAs the only U.S manufacturer of permanent rare earth magnets essential to a range of technologies that rely on an electric motor--from electric vehicles to medical devices to aerospace and defense systems to clean energy--we’re ushering in an electric future that is 100% Made in America. We’re a fast-growing, diverse team of scientists, engineers, entrepreneurs, and innovators from across the globe united by a shared mission to support the commercialization of our magnet manufacturing technology and forge a new path toward resource efficiency, resource independence and a low-carbon economy.
Process Engineer ObjectWin Technology IncProcess EngineerSan Diego, CAThe Process Engineer leads structured problem solving, process control and capability improvements, supports new equipment/product introductions (development, validation, and industrialization), and drives continuous improvement through data-driven methods. This role bridges day-to-day production support and longer-term process improvement/industrialization work-partnering closely with Operations leadership, Process Technicians, Quality, Safety, Facilities/Maintenance, and internal/external suppliers.
Process Engineer II Johnson Service GroupProcess Engineer IICarlsbad, CA$95,000–$105,000 / yearReporting to the Director of Technical Operations, the Process Engineer II is responsible for providing technical expertise in reagent formulation, filling, and finishing processes within a molecular diagnostics and life sciences manufacturing environment. Johnson Service Group (JSG) is seeking a Process Engineer II for our CMO life sciences, molecular diagnostics, and medical device manufacturing client in Carlsbad, CA .
Product Systems and Manufacturing Engineer Mount IndieProduct Systems and Manufacturing EngineerSan Diego, CaliforniaMount Indie is looking for an energetic and detail-oriented Product Systems & Manufacturing Engineer is the technical owner for assigned aerospace and defense electronic products across their lifecycle—from requirements and architecture through NPI, production, and sustainment. You will ensure products are well-defined, manufacturable, supportable, and delivered on time by working closely with Design Engineering, Test, Supply Chain, Production, Quality, Program Management, and Field Service.
Quality Engineer ARCHQuality EngineerEscondido, CaliforniaThis position plays a critical role in ensuring customer satisfaction, reducing internal scrap, driving continuous improvement initiatives, and supporting product and process validations. Through advanced manufacturing capabilities, technical expertise, and a strong commitment to quality, we help our customers bring innovative products to market with confidence.
Manufacturing Engineer II nVent Electric Inc.Manufacturing Engineer IISan Diego, CAWe provide a broad benefits package with meaningful programs for eligible full-time employees that includes: Medical, dental, and vision plans along with flexible spending accounts, short-term and long-term disability benefits, critical illness, accident insurance and life insurance. We offer a comprehensive range of systems protection and electrical connections solutions across industry-leading brands that are recognized globally for quality, reliability and innovation.
NewTest Engineer - Level 2 or Level 3 Northrop Grumman CorpTest Engineer - Level 2 or Level 3San Diego, CA$83,400–$125,200 / yearOur main products include satellites and associated space components and services, launch vehicles and related propulsion systems, missile products, subsystems and defense electronics, precision weapons, armament systems, and advanced aerospace structures. Preferred Qualifications: Experience with Instron/MTS load frames, Fourier-transform infrared spectroscopy (FTIR), dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), and interlaminar fracture (IMF) testing.
Manufacturing Engineer, NPI FirestormManufacturing Engineer, NPISan Diego, CaliforniaExport Control Compliance To conform to U.S. government export control regulations, including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR), you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or otherwise eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce. As a Manufacturing Engineer, NPI, you will support the transition of early designs into production-ready systems, helping scale from prototype builds to low-rate production.
Validation Engineer III LancesoftValidation Engineer IIISan Diego, CA$35Generates validation documentation as required (URS, FRS, DRS, FAT, DQ, engineering studies, IOQ, PQ, PV) for cleaning, shipping, sterilization, facilities, utilities, systems, equipment qualification/requalification, computer system validation, spreadsheets, test method validation and process validation. 5+ years of related work experience in a medical device industry with strong technical competency in performing equipment qualification (IQ/OQ/PQ), facility/lab qualification, process validations and excel spreadsheet validations.
Manufacturing Engineer Ascential TechnologiesManufacturing EngineerSan Diego, California$90,000–$110,000 / yearTypically requires 2+ years of experience, and a mechanical, electrical or industrial engineering Bachelor’s degree from four-year College or university, or the equivalent combination of education, experience and training that provides the required knowledge, skills and abilities. This role plays a critical part in driving operational excellence through built-in quality, lean manufacturing, structured new product introduction (NPI), and alignment with plant-level SQDC goals (Safety, Quality, Delivery, Cost).
Mechanical Engineer I General Dynamics Ordnance and Tactical Systems IncMechanical Engineer ISan Diego, CA$71,528–$96,773 / yearPerform engineering change process ECO • Perform drafting, tolerance analysis including GD&T, and create solid models using SolidWorks • Conduct FEA and conventional hand-cal stress analysis • Perform development testing • Support production sustaining engineering tasks such as NCR, MRB, and suppliers' technical inquiries • Perform detail design for precision electro-mechanical devices • Perform component and system level risk and reliability analysis such as FMEA & Fault Tree • Perform continuous improvement and Lean initiative projects • Perform tool design • Write process specification and test document • Perform product and process safety assessment. In addition to the benefits discussed above, the company offers the following voluntary benefits: Critical Illness Insurance, Accident Insurance, Identify Theft Protection, Enhanced Legal Services, Auto and Home Insurance, Pet Insurance, Commuter Benefits, Hospital Indemnity Insurance, Educational Assistance.
Senior QA Engineer DexCom IncSenior QA EngineerSan Diego, CA$87,000–$145,000 / yearExperience and Education Requirements: Typically requires a Bachelor's degree in a technical discipline, and a minimum of 5-8 years related experience or Master's degree and 2-5 years equivalent industry experience or a PhD and 0-2 years experience. You will assess quality performance issues of assigned suppliers using multiple input data streams from Dexcom and the supplier's process to drive / support supplier development activities.
Process Engineer - Local Candidates ONLY Sumitomo Electric Interconnect ProductsProcess Engineer - Local Candidates ONLYSan Marcos, California$65,000–$90,000 / yearIn this position you are instrumental in creating and maintaining process input and output specifications, working with controls automation of manufacturing processes, performing capacity analyses, troubleshooting, testing and supporting maintenance in machine troubleshooting and correction. Since the founding of Sumitomo Electric Industries, Ltd. in 1897 with copper wire production, we have developed many new technologies and products through innovative R&D activities based on Sumitomo Electric manufacturing technologies for electric wires and power cables.
Staff NPI Process Quality Engineer Becton Dickinson Medical DevicesStaff NPI Process Quality EngineerSan Diego, CaliforniaWaters collaborates with analytical laboratories around the world to advance the release of effective, high-quality medicines, assure the safety of food and water, and drive better patient outcomes by detecting diseases earlier, managing routine infections, and combatting growing antibiotic resistance. The primary focus of this position is to streamline and optimize design control processes to support the efficient and compliant development of In Vitro Diagnostic (IVD) products, including Research Use Only (RUO), IVD-CE marked, and clinical diagnostic products intended for global markets.
NewManufacturing Engineer Actalent IncManufacturing EngineerSan Diego, CA$68,770–$116,193 / yearRather than traditional floor-based process improvement, you will act as a Manufacturing Project / Product / Work-Package Engineer, managing production schedules and line-of-balance, resolving technical and supplier issues, and coordinating across engineering, quality, procurement, program management, and customers to ensure on-time delivery. Level III: approximately 5+ years of related manufacturing or project engineering experience; Level IV: approximately 9+ years of related manufacturing or project engineering experience, with the ability to substitute equivalent experience for formal education where appropriate.
Quality Engineer Winchester Interconnect CorporationQuality EngineerSan Marcos, CA$85,000–$100,000 / yearProficiency in quality, six sigma and lean manufacturing techniques, design for manufacturability, design for assembly, measurement system analysis, design of experiment, and failure mode and effects analysis techniques in a design and manufacturing environment. Maintain a robust corrective action process incorporating Six Sigma, design for manufacture, design for assembly, failure mode and effects analysis, MSA, DOE, reliability analysis,and lean manufacturing principles.
Senior Electrical Engineer - Healthcare Stantec IncSenior Electrical Engineer - HealthcareSan Diego, CABenefits Summary: Regular full-time and part-time employees (working at least 20 hours per week) will have access to health, dental, and vision plans, a wellness program, health care spending account, wellness spending account, group registered retirement savings plan, employee stock purchase program, group tax-free savings account, life and accidental death & dismemberment (AD&D) insurance, short-term/long-term disability plans, emergency travel benefits, tuition reimbursement, professional membership fee coverage, and paid time off. The Senior Electrical Engineer with a strong healthcare focus, will apply building electrical engineering principles, your superior client service skills, and project management best practices to deliver projects that meet project requirements, exceed client expectations, and meet project financial and other objectives.
Staff Quality Assurance Engineer (Hybrid - San Diego, CA) Insulet CorpStaff Quality Assurance Engineer (Hybrid - San Diego, CA)San Diego, CA$117,700–$176,500 / yearThis role serves as a subject matter expert, partnering cross-functionally with R&D, Systems Engineering, Hardware and Software Engineering, IT/Cybersecurity (as applicable), Manufacturing, Human Factors, Regulatory Affairs, and external stakeholders to embed quality early in development and ensure successful product realization and lifecycle management. Insulet's flagship innovation, the Omnipod 5 Automated Insulin Delivery System, integrates with a continuous glucose monitor to manage blood sugar with no multiple daily injections, zero fingersticks, and can be controlled by a compatible personal smartphone in the U.S. or by the Omnipod 5 Controller.
Staff Engineer – Product Development Systems DexComStaff Engineer – Product Development SystemsSan Diego, CaliforniaPartnering across R&D, Engineering, Operations, Quality, Regulatory Affairs, and Program Management, you will establish scalable engineering processes, governance, and best practices that improve development speed, product quality, manufacturing readiness, and organizational capability. This requires a highly skilled candidate who moves fast, has an entrepreneurial spirit to create new solutions, a tenacity to get things done, will thrive in an environment of ambiguity and change, and can break down and solve complex problems.