Computer Aided Design and Drafting Technologist JG Management Systems IncComputer Aided Design and Drafting TechnologistALBUQUERQUE, NMCollaborate and Integrate: Work closely with clients and team members, including CAD Designers, Product Design Engineers, and R&D Mechanical Engineers, to integrate defined requirements into your designs. Job Duties and Responsibilities: On any given day, you may be called on to: Innovate and Create: Dive into the world of design as you create, modify and evaluate detailed complex component and system definitions by implementing and integrating advanced design solutions.
Lead Transmission Line Engineer LeidosLead Transmission Line EngineerAlbuquerque, NMRemote$92,300–$166,850Additionally, the candidate will direct a team of engineers that regularly perform engineering analyses, PLS-CADD modeling, structure loading calculations, design structure framing and hardware assemblies, draft plans and specifications, and prepare bill of materials and procurement documents across project planning, engineering, environmental, permitting, and construction management phases. This is a senior leadership role with primary responsibilities in client relations, staff management, proposal development, scope creation/change, project execution, and new business capture for the teams’ full book of work.
NewElectronics Engineer III National Radio Astronomy ObservatoryElectronics Engineer IIIAlbuquerque, NM$99,822–$120,837 / yearOccasionally be required to lift and carry heavy lab equipment (up to 40 pounds) for relocation or installation of test apparatus, and to squat, kneel, or crawl to reach electrical/physical connections in tight spaces behind racks or under lab benches. Minimum of three years of experience in design, manufacture, and/or maintenance and repair of some or all the following technical areas: receiver systems, microwave antennas and feeds, local oscillators, and microwave/RF mixers and filters.
Mechnical Design Checker (Engineering Technologist 2/3) Los Alamos National LaboratoryMechnical Design Checker (Engineering Technologist 2/3)Los Alamos, NM$96,600–$158,000 / yearDue to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. Education/Experience at Level 3: Position requires a Bachelor' Degree in Engineering, Engineering Technology Science, Math or related degree from an accredited institution and 8 years of directly related experience; or an equivalent combination of education and experience directly related to the occupation.
Associate Electrical Engineer - Hardware Design and Analysis BoeingAssociate Electrical Engineer - Hardware Design and AnalysisAlbuquerque, New MexicoThe Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The Boeing CompanyBoeing Defense, Space and Security (BDS) is looking for an Associate Electrical Engineer - Hardware Design and Analysis (Level 2) to join our exclusive team at the Starfire Optical Range on Kirtland AFB in Albuquerque, New Mexico.
Mechanical Design Drafter (Designer/Drafter 5) Los Alamos National LaboratoryMechanical Design Drafter (Designer/Drafter 5)Los Alamos, NMDue to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. Demonstrate professional drafting and design experience in one or more of MDE group's core responsibilities, which includes vacuum vessels and tubing design, accelerator structure design, RF-drive systems, water-cooling systems, beam line layout, beam target design, electromagnet design, and accelerator diagnostic device design.
Senior Design Engineer GEM TechnologiesSenior Design EngineerLos Alamos, New MexicoFounded in 1994 as a nuclear engineering firm to support federal operations in East Tennessee, GEM has since expanded into a nationwide, multi-disciplinary provider with over 270 employees and a diverse portfolio of contracts in the environmental, nuclear, and defense sectors. GEM Technologies, Inc. (GEM) is an award-winning federal contractor with more than 30 years of experience providing environmental, construction, facility management, and technical services to federal agencies, state and local governments, and commercial organizations.
DESIGN ENGINEER - LANL - Los Alamos, NM OLH Inc.DESIGN ENGINEER - LANL - Los Alamos, NMLos Alamos, NMPosition requires a Bachelor's Degree in Engineering from an ABET-accredited college or university and a minimum of 20 years of practical work experience necessary to perform the responsibilities outlined above. We are a small woman-owned firm, recognized for our ability to consistently deliver quality service on projects that are completed on schedule and within budget.
Senior Design Engineer #3136 (3745) Navarro Inc.Senior Design Engineer #3136 (3745)Los Alamos, NMNavarro Research & Engineering is an award-winning federal contractor dedicated to partnering with clients to advance clean energy and deliver effective solutions for complex challenges in the nuclear and environmental fields. Position requires a Bachelor's Degree in Engineering from an ABET-accredited college or university and a minimum of 9 years of practical work experience necessary to perform the responsibilities outlined above.
Financial Aid Re-Entry Coordinator California Institute of Applied TechnologyFinancial Aid Re-Entry CoordinatorOnly in, NMRemote$26–$28 / hourPreferred associate or bachelor’s degree and related experience in financial aid, higher education, student advising, enrollment services, student accounts, or customer service; or any satisfactory combination of education and experience which demonstrates the knowledge, skills, and abilities to perform the position. Analyze and evaluate financial aid eligibility for continuing and returning students and provide guidance regarding FAFSA completion, federal financial aid, Title IV eligibility, verification requirements, student loans, and funding options.
Mechanical Design Engineer (R&D Engineer 2/3) Los Alamos National LaboratoryMechanical Design Engineer (R&D Engineer 2/3)Los Alamos, NM$106,400–$176,000 / yearDue to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. In addition to the responsibilities outlined at the lower level, the selected candidate at this level is expected to possess in-depth knowledge of mechanical engineering principles previously stated for R&D Engineer 2, project execution, and the mechanical design of accelerator components and ancillary systems.
R&D Design and Fabrication Machinist (Machinist 4/5) Los Alamos National LaboratoryR&D Design and Fabrication Machinist (Machinist 4/5)Los Alamos, NM$80,400–$127,900 / yearDue to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. The group specializes in a broad array of energetic materials science including development (synthesis and formulation) and testing of novel explosives, pilot plant production of explosive materials, advanced manufacturing of explosives, analytical chemistry of explosives and explosives ingredients, detonation performance testing, and special security projects.
Silicon Photonics Foundry PDK Design Engineer IntelSilicon Photonics Foundry PDK Design EngineerRio Rancho, New MexicoJob Type: Experienced HireShift: Shift 1 (United States of America)Primary Location: US, New Mexico, AlbuquerqueAdditional Locations: Business group: Intel Foundry strives to make every facet of semiconductor manufacturing state-of-the-art while delighting our customers -- from delivering cutting-edge silicon process and packaging technology leadership for the AI era, enabling our customers to design leadership products, global manufacturing scale and supply chain, through the continuous yield improvements to advanced packaging all the way to final test and assembly. Architects, designs, leads pathfinding, development, validation of software solutions in support of tools, flows, PDK design components, and methodologies used in Electronic-Photonic design automation, software products, or ecosystem enabling.
Senior Mechanical Design Engineer - Pulsed Power Pacific FusionSenior Mechanical Design Engineer - Pulsed PowerLos Lunas, New MexicoWe are rapidly designing and building a pulser-driven inertial fusion system to achieve net facility gain (more fusion energy output than stored energy input). This role requires a top-tier combination of technical expertise, problem-solving skills, and a proactive mindset to meet the exciting challenges in the field of fusion energy.
Mechanical Design Engineer (Associate or Experienced) BoeingMechanical Design Engineer (Associate or Experienced)Albuquerque, New MexicoThe Boeing CompanyBoeing Defense, Space & Security has an exciting opportunity for an innovative, self-reliant, people-friendly, and highly motivated Mechanical Design Engineer (Associate or Experienced) to join our Rapid Space Capability (RSC) Laser and Electro Optical Systems (LEOS) group in Albuquerque, New Mexico. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
Sales and Design Consultant California Closet Company IncSales and Design ConsultantAlbuquerque, NMThe Design and Sales Consultant provides an in-home customer experience by designing and selling cabinetry, closets, home offices, garages, media centers, and other storage solutions for homes. Founded in 1978, California Closets has built a reputation as the leader and design authority in premium space management, delivering custom-designed organizational solutions and exceptional service.
Mechanical Design Engineer - Space Hardware (R&D Engineer 1/2) Los Alamos National LaboratoryMechanical Design Engineer - Space Hardware (R&D Engineer 1/2)Los Alamos, NM$96,600–$158,000 / yearDue to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. The Intelligence and Space Research Division at LANL has more than 60 years of experience designing, building, and operating ground-, air-, and space-based systems supporting nuclear nonproliferation, treaty verification, remote sensing, space situational awareness, and NASA missions including Curiosity, Perseverance, IBEX, Van Allen Probes, and IMAP.
CAD Technologist NANA Regional Corporation IncCAD TechnologistAlbuquerque, NMPhysical Demands: If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sub-contractor you may be required to comply with NNSA security requirements for MedPEDs. Collaborate and Integrate: Work closely with clients and team members, including CAD Designers, Product Design Engineers, and R&D Mechanical Engineers, to integrate defined requirements into your designs.
CAD Technologist AkimaCAD TechnologistAlbuquerque, NMIf you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sub-contractor you may be required to comply with NNSA security requirements for MedPEDs. + Collaborate and Integrate: Work closely with clients and team members, including CAD Designers, Product Design Engineers, and R&D Mechanical Engineers, to integrate defined requirements into your designs.
Target Fabrication Post Bachelor Engineer Los Alamos National LaboratoryTarget Fabrication Post Bachelor EngineerLos Alamos, NMDue to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. New-Employment Drug Test: The Laboratory requires successful applicants to complete a new-employment drug test and maintains a substance abuse policy that includes random drug testing.
Scientific Software Developer Paid Co-op/Internship Stellar ScienceScientific Software Developer Paid Co-op/InternshipAlbuquerque, New MexicoSelected Interns or Co-op students will support object-oriented C++ software development in the following domains: space domain awareness (SDA), image simulation, space systems modeling, laser source generation and effects modeling, high power microwave systems modeling and simulation, computer vision, image processing, artificial intelligence (AI), machine learning (ML), atmospheric modeling, computational electromagnetics (CEM), high performance computing (HPC), computer aided design (CAD) tools, meshing, thermal modeling, and more. The main requirements are that candidates be top-notch, responsible, self-motivated, honest, able to work well independently or in small teams, and be able to rapidly learn new languages, tools, and techniques as needed to meet mission requirements.
CADD Operator (Active or recent (<1yr) DOE Q or DOD TS Clearance) NANA Regional Corporation IncCADD Operator (Active or recent (<1yr) DOE Q or DOD TS Clearance)Albuquerque, NMIf you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sub-contractor you may be required to comply with NNSA security requirements for MedPEDs • If you have a MedPED and you are selected for an on-site interview at Sub-contractor, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date. We are seeking a dedicated Computer Aided Design and Drafting (CAD) Technologist to join our diverse team of engineering and technologist staff to assist with the scoping/definition, creation, submission, and implementation of engineering design documents (CAD and CREO drawings) for custom mechanical components and internal/external cable harnesses.
WRS-WMT Undergraduate Intern Los Alamos National LaboratoryWRS-WMT Undergraduate InternLos Alamos, NMDue to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. New-Employment Drug Test: The Laboratory requires successful applicants to complete a new-employment drug test and maintains a substance abuse policy that includes random drug testing.
CADD Operator (Active or recent (<1yr) DOE Q or DOD TS Clearance) AkimaCADD Operator (Active or recent (<1yr) DOE Q or DOD TS Clearance)Albuquerque, NMWe are seeking a dedicated Computer Aided Design and Drafting (CAD) Technologist to join our diverse team of engineering and technologist staff to assist with the scoping/definition, creation, submission, and implementation of engineering design documents (CAD and CREO drawings) for custom mechanical components and internal/external cable harnesses. + If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sub-contractor you may be required to comply with NNSA security requirements for MedPEDs.
Vacuum Technology and Data Acquisition Research Technologist 2 Los Alamos National LaboratoryVacuum Technology and Data Acquisition Research Technologist 2Los Alamos, NMDue to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. Essential Job Functions(can perform with or without reasonable accommodation): Ability to apply torque with hands or arms, good hand eye coordination and fine motor control, ability to lift 25 pounds to a height of 3-4 feet and load into an enclosed space.
CAD/GIS Technician ASRC Federal Holding CompanyCAD/GIS TechnicianAlbuquerque, NMASRC Federal Netcentric Technologies, LLC is seeking Computer-Aided Drafting (CAD)/Geographic Information Systems (GIS) Technician to support our support the Kirtland AFB Engineering Operations Services (KEOS) contract in Albuquerque, New Mexico. Basic Requirements: Associates Degree in Applied Science (Architectural/Engineering Drafting Technology, Planning, or related degree); relevant experience will be considered in lieu of degree.
ARCHITECT-DIRECT HIRE AUTHORITY United States Air ForceARCHITECT-DIRECT HIRE AUTHORITYHolloman AFB, NM$104,349–$161,313 / yearINDIVIDUAL OCCUPATIONAL REQUIREMENT: EDUCATION: Degree in Architecture; or related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems. The adequacy of such background must be demonstrated by at least one of the following: A) Related Curriculum: Degree in architectural engineering may be accepted as satisfying in full the basic requirements, provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified above.
C++ Software Engineer (ABQ) Stellar ScienceC++ Software Engineer (ABQ)Albuquerque, NMFull timeJoin our unique, collaborative team to help implement leading-edge scientific software tools in fascinating domains including space situational/domain awareness, computer vision, directed energy, metamaterials, and biothermal modeling. Stellar Science is seeking several modern C++ 20/23 Software Engineers with experience creating reusable, maintainable code solving challenging math and physics problems.
Emerging Modern C++ Software Developer (ABQ) Stellar ScienceEmerging Modern C++ Software Developer (ABQ)Albuquerque, New MexicoThe main requirements are that candidates be top-notch, responsible, self-motivated, honest, able to work well independently or in small teams, and be able to rapidly learn new languages, tools, and techniques as needed to meet mission requirements. Applicants who convey a passion for developing quality code through listed projects, a link to an active github account, or extracurricular software development activities, will be given preference.
Space Instrument Mechanical Technologist (Engineering Technologist 1/2) Los Alamos National LaboratorySpace Instrument Mechanical Technologist (Engineering Technologist 1/2)Los Alamos, NM$87,800–$143,000 / yearDue to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. This position will be a critical member of a highly functioning team of technicians, engineers, and scientists that interact regularly with government organizations and commercial partners, provide guidance to project teams on best approaches, and in many cases be a single point of contact for all fabrication for this important hardware.
Space Instrument Mechanical Technician (Development and Fabrication Technician 3/4) Los Alamos National LaboratorySpace Instrument Mechanical Technician (Development and Fabrication Technician 3/4)Los Alamos, NM$66,100–$103,600 / yearDue to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. The Intelligence and Space Research (ISR) Division at Los Alamos National Laboratory has been designing, building, and operating highly innovative ground, air and space-based measurement and detection systems for 60 years.
Space Hardware Production Technician (Development and Fabrication Tec 3/4) Los Alamos National LaboratorySpace Hardware Production Technician (Development and Fabrication Tec 3/4)Los Alamos, NM$66,100–$103,600 / yearDue to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. This position will support the Electromagnetic Pulse Sensor (EMP) project team in the Space-based Nuclear Detonation Detection (SNDD) program by developing, designing, and fabricating parts, fixtures, and assemblies used in hardware critical to national security.
TEST AND EVALUATION ENGINEER- DIRECT HIRE AUTHORITY United States Air ForceTEST AND EVALUATION ENGINEER- DIRECT HIRE AUTHORITYHolloman AFB, NM$89,508–$138,370 / yearHave evidence of successfully passing the written test required for professional registration or have successfully passed the Engineer-in-Training (EIT) examination and have completed all the requirements for either (a) a Bachelors Degree in Engineering Technology (BET) from an accredited college or university that included 60 semester or 90 quarter hours of courses in the physical, mathematical, and engineering sciences, or (b) a BET from a program accredited by ABET. SPECIALIZED EXPERIENCE: Applicants must have at least 1 year (52 weeks) of specialized experience at the next lower broadband NH-02, equivalent to the next lower grade GS-11 or equivalent in other pay systems Specialized experience is described as skill and knowledge of aircraft ground systems, and support equipment sufficient to plan, test, design, troubleshoot, evaluate, and oversee the development and or sustainment of highly complex weapons systems and or aircraft systems.
C++ Software Engineer (ABQ) Stellar Science Ltd CoC++ Software Engineer (ABQ)Albuquerque, NMJoin our unique, collaborative team to help implement leading-edge scientific software tools in fascinating domains including: • Space situational/domain awareness • Computer vision • Directed energy • Metamaterials • Biothermal modeling. Stellar Science is seeking several modern C++ 20/23 Software Engineers with experience creating reusable, maintainable code solving challenging math and physics problems.
CADD Designer Wilson & CompanyCADD DesignerLas Cruces, New MexicoResponsible for meeting project schedules, timely completion of project task deliverables, creating study and design materials for public meetings and client deliverables, and supporting planning and design functions of multi-disciplined teams. Guided by our purpose, we help clients move from concept to completion, transforming unused spaces into productive places, underutilized facilities into efficient ones, and rural or urban challenges into achievable solutions.
Weapons Engineering R&D Engineer 1/2 Los Alamos National LaboratoryWeapons Engineering R&D Engineer 1/2Los Alamos, NM$96,600–$158,000 / yearNote to Applicants: Due to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. Hands-On Project Experience: Familiarity with analysis or testing in areas such as shock, vibration, fluids, thermal, nuclear, systems, explosives, manufacturing, process, control systems, data acquisition, and data analysis, gained through class projects or similar experiences.
R&D Engineer 3/4 Los Alamos National LaboratoryR&D Engineer 3/4Los Alamos, NM$128,000–$215,900 / yearDue to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. Work with a variety of stakeholders in product engineering, quality engineering, process engineering, procurement engineering, facilities engineering, and other organizations to deliver timely solutions that are fit for use in a category 2 nuclear production facility.
Project Engineer Senior-Operations and Maintenance Bernalillo CountyProject Engineer Senior-Operations and MaintenanceAlbuquerque, New MexicoWork hazards or potential work hazards include exposure to noise, vibration, dust, exhaust fumes, mist, and severe weather conditions; driving of vehicles; working in and around heavy equipment; and performing duties on rough terrain. Provides technical assistance concerning sewer and water districts; conducts planning, designs, and prepares specifications for new or appended wastewater treatment, water supply and drainage management systems.
STAFF ENGINEER / PROJECT MANAGER City of Hobbs New MexicoSTAFF ENGINEER / PROJECT MANAGERHobbs, NM$35.57–$56.90 / hourPerforms complex analytical work in providing office and development review and engineering support and construction and field engineering support for environmental, drainage, water, sewer, street, and other public works projects and programs ensuring technical competence and compliance with all current codes and criteria; assists the City Engineer as needed and directed. Designs, develops, manages, and implements public work projects, including water, sanitary sewer, storm sewer, roadway, signalization, as well as various site and drainage improvement projects utilizing Microsoft Office, Engineering and Surveying software and surveying equipment.
Associate Engineer I City of Las CrucesAssociate Engineer ILas Cruces, NM$51,561.64–$73,182.46 / yearAssists with coordination of projects; provides information and documentation regarding various projects in response to inquiries and/or concerns; assists with monitoring progress by reviewing construction schedules and conducting field inspections of projects; communicates with inspectors and contractors to address issues, conflicts, delays, and corrections to materials or methods; may provide work direction to work crews and other engineering staff. Prepares preliminary and final cost estimates, contract documents, material specifications, schedules, bid tabs and correspondence to meet established deadlines; reviews material testing lab and project payments to verify that correct unit prices are used; forwards payment requests for approval and timely payment.
Senior Electrical Designer Wilson & CompanySenior Electrical DesignerAlbuquerque, New Mexico$80,000–$105,000 / yearWith employees across multiple offices in the Midwest, Southwest, Rocky Mountain, and Western regions in the United States, we bring people together to practice their craft, create value, and accomplish great things. Guided by our purpose, we help clients move from concept to completion, transforming unused spaces into productive places, underutilized facilities into efficient ones, and rural or urban challenges into achievable solutions.
Undergraduate and Graduating HS Senior Internship - Engineering Los Alamos National LaboratoryUndergraduate and Graduating HS Senior Internship - EngineeringLos Alamos, NMExamples of LANL projects in engineering include, but are not limited to: Advanced design, analysis and testing of complex systems and structures for national and global security applications; Using X-Ray Computed Tomography to measure density in high explosives; Building, testing, and developing simulations for a table-top electron accelerator that generates RF waves; Design, development, and testing of heat pipes for advanced nuclear reactor concepts; Computational material science modeling of the strength and damage behavior of metals at meso- and continuum scales; Refining algorithms for dynamic path planning for robotic manipulators in industrial settings; Uncertainty quantification and machine learning methods in the graph transport model; Computational Fluid Dynamics (CFD) modeling of flow around structures with vortex induced vibrations for energy security applications; Using machine learning techniques to improve image processing and mechanical response in aerial robots; and Modeling tritium fuel cycling and the impact of liquid metal plasma facing components of fusion energy systems. Student selected for UGS internships are most competitive when they possess the following knowledge and skills: Computer programming in support of engineering design, data acquisition, analysis or machine learning; Fabrication and testing techniques currently used within your selected specific engineering field(s); Computer Aided Design (CAD) and Finite Element Analysis (FEA) experience; Experience in additive manufacturing; Laboratory or shop experience demonstrating attention to detail and commitment to safety; Demonstrated ability to communicate (verbal and written) well in a professional scientific context; and .
Undergraduate Internship - Engineering Los Alamos National LaboratoryUndergraduate Internship - EngineeringLos Alamos, NMDue to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. Students selected for UGS internships are most competitive when they possess the following knowledge and skills: Computer programming in support of engineering design, data acquisition, analysis or machine learning; Fabrication and testing techniques currently used within your selected specific engineering field(s); Computer Aided Design (CAD) and Finite Element Analysis (FEA) experience; Laboratory or shop experience demonstrating attention to detail and commitment to safety; Demonstrated ability to communicate (verbal and written) well in a professional scientific context; and .
ENGINEERING INTERN (SEASONAL) City of Hobbs New MexicoENGINEERING INTERN (SEASONAL)Hobbs, NMAbility to prepare, organize and maintain engineering field and office data, reports and systems; ability to perform manual tasks for extended periods of time; ability to work safely; ability to communicate effectively verbally and in writing; ability to establish and maintain effective working relationships with employees, other departments and the public; ability to understand and carry out written and oral instructions. While performing the duties of this job, the employee is frequently required to stand; walk long distances; sit for prolonged periods; stoop, kneel, crouch, or crawl; talk or hear; use arms and hands to finger, handle, feel, swing, or operate objects, keyboards, tools, or controls; and reach with hands and arms.
Staff Mechanical Engineer KBR IncStaff Mechanical EngineerLas Cruces, NMServe as a technical lead for complex projects by developing schedules, establishing technical baselines, managing engineering scope, and guiding teams toward timely and cost-effective completion. This role will lead the design, development, integration, and validation of mechanical systems for ground-based mobile satellite communication systems, antenna manufacturing, and radio frequency engineering programs.
DESIGNER/DRAFTER 2 – LANL – 3224 - Los Alamos, NM OLH Inc.DESIGNER/DRAFTER 2 – LANL – 3224 - Los Alamos, NMLos Alamos, NMSRNS utilizes various work schedules including 5/8s (8 hour/day; five days per week), 4/10s (10 hours/day; four days per week), and 9/80s (9 hours/day, five days on week AA and four days on week BB. We are a small woman-owned firm, recognized for our ability to consistently deliver quality service on projects that are completed on schedule and within budget.
Designer/Drafter 1/2 Los Alamos National LaboratoryDesigner/Drafter 1/2Los Alamos, NM$49,600–$76,700 / yearDue to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China, the Islamic Republic of Iran, the Democratic People's Republic of North Korea, and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. The successful candidate will have demonstrated experience and skills using 3D computer-aided design (CAD) software to produce models, drawings, layouts & engineering concepts, and generate complete design packages for complex components, assemblies, tooling, equipment and/or systems.
Designer/Drafter HII Nuclear Inc.Designer/DrafterLos Alamos, NMWhile working to achieve N3B LLCC objectives, ensures all activities and operations are performed in a safe and deliberate manner; maintains required safety, security and operational training; assures procedural and regulatory compliance; and makes safety, security and quality an integral part of every task, including taking the necessary steps to stop work if continuing the job is unsafe or compromises security. Education and Experience Required:Bachelors' degree in appropriate discipline; however, a combination of education and relevant experience wherein the knowledge, skills and abilities to perform the position’s duties and responsibilities have been adequately demonstrated is acceptable.
Associate Drafting Technician KBR IncAssociate Drafting TechnicianLas Cruces, NM$20.19–$30.29 / hourKBR strives to create a safer, more secure and sustainable world by bringing together the best and brightest to deliver technologies and solutions that help our customers accomplish their most critical missions and objectives. The Associate Drafting Technician supports the creation of detailed technical drawings under direct supervision, working from sketches, marked-up prints, and established design references.