Flight Test Engineer Company ConfidentialFlight Test EngineerNorth Las Vegas, NVFull timeDesigning: Utilize with expertise Computer Aided Design (CAD), Computer Aided Manufacturing (CAM), and 3D slicing software to design precise UAV parts and components. We are seeking an experienced Aeronautical Engineer with expertise in designing, building and flying custom/prototype Unmanned Aerial Vehicles (UAVs).
Radar Test and Analysis Engineer JT4 LLCRadar Test and Analysis EngineerLas Vegas, NevadaEngineer IV: The candidate must have a Bachelor of Science in Engineering from and ABET-accredited academic institution and 8 years of related engineering experience, or have an accredited Master of Science in Engineering with at least 6 years of related engineering experience, or have an accredited doctoral degree in Engineering with at least 4 years of related engineering experience. Engineer V: The candidate must have a Bachelor of Science in Engineering from an ABET-accredited academic institution and 14 years of related engineering experience, or have an accredited Master of Science in Engineering with at least 10 years of related engineering experience, or have an accredited doctoral degree in Engineering with at least 8 years of related engineering experience.
Radar Test Engineer Opportunities - Mid to Senior Level JT4 LLCRadar Test Engineer Opportunities - Mid to Senior LevelLas Vegas, Nevada$106,516.80–$152,942.64 / yearMinimum requirements/experience for each level Engineer listed below: Engineer IV: The candidate must have a Bachelor of Science in Engineering from an ABET-accredited institution and 8 years of related engineering experience, or have an accredited Master of Science in Engineering with at least 6 years of related engineering experience, or have an accredited doctoral degree in Engineering with at least 4 years of related engineering experience. Engineer V: The candidate must have a Bachelor of Science in Engineering from an ABET-accredited institution and 14 years of related engineering experience, or have an accredited Master of Science in Engineering with at least 10 years of related engineering experience, or have an accredited doctoral degree in Engineering with at least 8 years of related engineering experience.
Radar Test Engineer Opportunities - Entry to Mid-Level JT4 LLCRadar Test Engineer Opportunities - Entry to Mid-LevelLas Vegas, Nevada$80,000–$135,000 / yearEngineer III: The candidate must have a Bachelor of Science in Engineering from an ABET-accredited institution and 4 years of related engineering experience, or have an accredited Master of Science in Engineering with at least 2 years of related engineering experience, or have an accredited doctoral degree in Engineering. Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
Engineer IV JT4 LLCEngineer IVLas Vegas, NevadaA Bachelor of Science in Engineering from an ABET-accredited academic institution and eight (8) years of related engineering experience, or an accredited Master of Science in Engineering and a minimum of six (6) years of related engineering experience, or an accredited doctorate degree in engineering and a minimum four (4) years of related engineering experience are required for this position. Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
Engineer III JT4 LLCEngineer IIILas Vegas, NevadaWe are looking for engineers with entry to mid-level skill sets who work well in both theoretical and practical domains as part of an iterative process to create innovative solutions for a multitude of relevant domain challenges as partially described below: Perform as a lead of a development, sustainment, or operations and maintenance team on more complex engineering assignments. A Bachelor of Science in Engineering from an ABET-accredited academic institution and four years of related engineering experience, or an accredited Master of Science in Engineering and a minimum of two years of related engineering experience, or an accredited doctorate degree in engineering are required for this position.
Sr. Quality Engineer, Components, Powertrain Tesla IncSr. Quality Engineer, Components, PowertrainSparks, NVManage and facilitate the root cause & corrective actions system through tracking and validation of issues and support in root cause analysis through facilitating brainstorming, use of lean methodologies, hypothesis testing, design of experiments, etc. Specific training and demonstrated success in applying design for quality and problem-solving methodologies: FMEA, process capability analysis, hypothesis testing, DoE, SPC, MSA, etc.
NewElectrical Engineer -PE for Leading Engineering Firm in Las Vegas Finnegan Erickson Associates (FEA Consulting Engineers)Electrical Engineer -PE for Leading Engineering Firm in Las VegasHenderson, NVFull timeFounded in 1989 by Robert Finnegan and Boyd Erickson, FEA Consulting Engineers serves both the public and private industries with a proven track record of delivering exceptional projects and providing cutting-edge designs in the structural engineering industry. Position Overview The Project Manager-Electrical Engineer (PE) will liaise between clients and co-workers to ensure the timely and successful delivery of projects according to client needs.
Lead Substation Electrical Engineer WSP Global IncLead Substation Electrical EngineerReno, NVPerform professional and complex electrical engineering work relating to substation physical layout and/or protection and control (P&C) design, including single‑line and three‑line diagrams, wiring diagrams, general arrangements, bus configurations, grounding grid design, and lightning protection. Tasks include the research, design, concept development, planning, and design support of transmission and distribution substations, power distribution, power regulation, and protection and control systems for utility clients.
Electrical Engineer - Top Nevada MEP Firm Michael Page InternationalElectrical Engineer - Top Nevada MEP FirmReno, Nevada$120,000–$160,000 / yearFull timeJob TitleElectrical EngineerJob DescriptionDesign electrical systems including power distribution, lighting, grounding, emergency power, and low-voltage systems. Job summarySector: ConstructionSub Sector: Construction PlanningIndustry: PropertyWhere: RenoContract Type: PermanentConsultant name: Molly BocaJob Reference: JN-072026-7070220
Staff BESS Electrical Design Engineer, EPC Redwood Materials IncStaff BESS Electrical Design Engineer, EPCNVRedwood is localizing a global battery supply chain that seamlessly integrates recovery, reuse, and recycling - keeping critical minerals in circulation and driving the energy transition. Interface with utilities and ISO/RTOs to support interconnection studies/submittals, permitting, and compliance for new renewable and BESS projects.
Experienced Substation Electrical Engineer WSP Global IncExperienced Substation Electrical EngineerReno, NVDevelop electrical calculations including station service/load calculations, equipment sizing, feeder sizing, voltage drop, lighting calculations, and other project-specific design calculations. Participate in concept development and detailed design for equipment sizing and cabling, AC/DC systems (battery/charger), control house/panel design, raceway (conduit/cable tray), and trenching design strategies that account for safety and functionality.
Electrical Engineer TaitElectrical EngineerLas Vegas, NVFull timeTAIT’s 20 global offices have developed iconic productions and experiences in over 30 countries, all seven continents, and even outer space for renowned performers, theme parks, exhibits, and venues across the globe, including partnerships with Taylor Swift, Cirque Du Soleil, Royal Opera House, Nike, NASA, Bloomberg, Google, Beyoncé, and The Olympics. Working closely with senior engineers and project teams, you will contribute to the creation of electrical schematics, assist in troubleshooting electrical issues, and conduct tests to ensure the functionality and safety of electrical systems.
Senior Electrical Engineer – High Voltage & Pulsed Power Systems ConsultNetSenior Electrical Engineer – High Voltage & Pulsed Power SystemsLas Vegas, NV$90–$100 / hourFor over 25 years, we have connected thousands of consultants with meaningful roles through a personal, communication-driven approach, partnering with a diverse client base to build high-performing teams and create lasting impact. This individual will collaborate with cross-functional engineering teams to develop next-generation products, evaluate emerging technologies, and support qualification efforts for key system components.
Staff Bess Electrical Design Engineer, EPC Redwood MaterialsStaff Bess Electrical Design Engineer, EPCCarson City, NVRedwood is localizing a global battery supply chain that seamlessly integrates recovery, reuse, and recycling - keeping critical minerals in circulation and driving the energy transition. Interface with utilities and ISO/RTOs to support interconnection studies/submittals, permitting, and compliance for new renewable and BESS projects.
Facilities Electrical Engineer Tesla IncFacilities Electrical EngineerSparks, NVExperience with complex power distribution systems including - Design, operating/maintaining the equipment, troubleshooting and programming /adjusting medium voltage relays; ability to read electric utility system drawings (one-lines, three-lines, schematics, etc.). Assist Facilities Operations and Maintenance in creating maintenance plans, scopes of work for electrical testing vendors, planning of outages and supporting the coordination of downtime activities between stakeholders (construction, facilities, and manufacturing).
ESSP Electrical Engineer - Experienced Professional WSP Global IncESSP Electrical Engineer - Experienced ProfessionalLas Vegas, NVPower System Planning Studies: steady-state real and reactive power flow including outage contingencies, generation interconnect feasibility, P-V and Q-V analysis for voltage stability margins, dynamic stability performance, automation of large batch simulations, working with models from NERC regional entities (WECC, MRO, SERC etc.), NERC compliance. Design Studies: substation grounding, corona, electric and magnetic fields, insulation coordination (lightning, switching surge, and contamination performance), transient (time domain) simulation, power quality (harmonics, voltage flicker, over/under voltage, etc.), motor starting, AC interference (transmission line interaction with railroads and pipelines).
Senior Electrical Engineer Light and WonderSenior Electrical EngineerLas Vegas, NVAbility to understand and troubleshoot complex electro-mechanical systems with particular emphasis on embedded processor and microcontroller-based electronics, to identify failure points, perform forensic debugging and root cause analysis, and design test methods to determine reliability. This includes the ability to translate technical findings into actionable guidance for design engineers, write clear and detailed test plans for testers, and produce forensic diagnostic reports that support both design validation and sustaining engineering efforts.
Senior Electrical Engineer Hamilton CompanySenior Electrical EngineerReno, NVDemonstrated design experience with CPLDs, FPGAs, M3 microcontrollers, optical encoders, Hall-effect current sensors, MOSFETs, Op Amps, ESD & overcurrent protection, DC-DC switching power supplies. For more than 60 years, Hamilton has been satisfying customer needs by combining quality materials with skilled workmanship, ensuring the highest level of performance of every precision fluid measuring device we manufacture.
Electrical Engineer, Automation, Optimus Tesla IncElectrical Engineer, Automation, OptimusSparks, NVIn this role, you will drive the design and development of new automation equipment and manufacturing lines, creating custom schematics for electrical panels, field wiring, and plumbing, while collaborating with cross-functional teams - including technicians, mechanical engineers, and controls specialists - to interpret requirements, procure equipment, and execute troubleshooting and commissioning. overcurrent protection devices, power supplies, servo drives, and motors, VFDs, PLCs, network switches, PDBs, and terminal blocks, wire and cable, sensors, safety relays, PLCs, IO blocks, valve manifolds, and other field devices).
Senior Electrical Engineer - water/wastewater (remote allowed) Brown and Caldwell IncSenior Electrical Engineer - water/wastewater (remote allowed)Las Vegas, NVRemote$95,000–$129,000 / yearMore specifically, we are looking for a candidate with a broad experience in electrical design and management including: design and equipment upgrades, power system studies including arc flash hazards analysis, low and medium voltage power distribution system design in an industrial setting, equipment design and selection including motor control centers, drives, switchgear, panelboards, substation transformers, and related equipment, drawing creation including, power plans and layouts, one-lines, wiring diagrams, for plant power. In this role, your design delivery responsibilities will include power system modeling, conceptual design development, layout and selection of equipment, development of contract drawings using 2D and 3D design approaches, bid package preparation, field investigations, electrical and I&C design, and support during construction both in the office and the field.
Electrical Engineer The Boring CompanyElectrical EngineerLas Vegas, NVToday, we are creating the technology to increase tunneling speed and decrease costs by a factor of 10 or more with the ultimate goal of making Hyperloop adoption viable and enabling rapid transit across densely populated regions. Work with other engineers and technicians, in the field and in the office, to continually improve and integrate electrical systems with mechanical structures, mechanisms, software packages and civil engineering systems.
Senior Electrical Engineer Actalent IncSenior Electrical EngineerLas Vegas, NV$150,000–$200,000 / yearThe organization offers a competitive total rewards package, including a comprehensive benefits program with retirement plan matching, robust medical, dental, and vision coverage, health savings account support, life insurance, generous paid time off, relocation assistance for qualified candidates, and tuition reimbursement to support ongoing education and professional development. This Senior Electrical Engineer role focuses on leading the design, development, and integration of advanced analog and digital circuits, power electronics, and control systems for cutting-edge space-related technologies.
Senior Electrical Engineer Light & WonderSenior Electrical EngineerLas Vegas, NevadaAbility to understand and troubleshoot complex electro-mechanical systems with particular emphasis on embedded processor and microcontroller-based electronics, to identify failure points, perform forensic debugging and root cause analysis, and design test methods to determine reliability. This includes the ability to translate technical findings into actionable guidance for design engineers, write clear and detailed test plans for testers, and produce forensic diagnostic reports that support both design validation and sustaining engineering efforts.
xPL Application Engineer - Electrical Turner Construction CoxPL Application Engineer - ElectricalLas Vegas, NVEssential Duties & Key Responsibilities: Develop electrical designs for xPL Offsite Manufacturing (OSM) products and systems, including single line development, equipment and component selections, submittal development, and system optimization. Collaborate with Architects, Mechanical Engineers, Electrical Engineers, Structural Engineers, and other construction disciplines to seamlessly integrate OSM Medium/Low Voltage (MV/LV) electrical systems into design documents.
Electrical Engineer Hamilton CompanyElectrical EngineerReno, NevadaFull timeDesign experience with CPLDs, FPGAs, ARM microcontrollers, optical encoders, Hall-effect sensors, MOSFETs, Op Amps, ESD and overcurrent protection, and DC-DC switching power supplies. For more than 60 years, Hamilton has been satisfying customer needs by combining quality materials with skilled workmanship, ensuring the highest level of performance of every precision fluid measuring device we manufacture.
Senior Electrical Engineer Brown and Caldwell IncSenior Electrical EngineerReno, NV$95,000–$129,000 / yearIn this role, your primary design delivery responsibilities will include conceptual and detailed design development on projects involving low-voltage and medium-voltage electrical distribution systems, selection of equipment and technical specifications preparation, field investigations, development of contract drawings using 2D and 3D design approaches, and support of projects during construction, both in the office and in the field. Experience in electrical power systems design and specifications including service entrance, feeder and branch circuits, lighting, grounding, power distribution, and standby power equipment, Solid knowledge in the application of the National Electrical Code.
Electrical Field Engineer-Night Shift Bechtel CorpElectrical Field Engineer-Night ShiftNV$119.80–$182.70 / hourExtraordinary teams building inspiring projects: Since 1898, we have helped customers complete more than 25,000 projects in 160 countries on all seven continents that have created jobs, grown economies, improved the resiliency of the world''s infrastructure, increased access to energy, resources, and vital services, and made the world a safer, cleaner place. Education and Experience Requirements: Requires an University/B.S degree in Electrical Engineering with 10-13 years of relevant experience is desired but may be waived if 14-17 years of equivalent industry experience can be demonstrated.
Sr. Electrical Engineer Varex Imaging CorpSr. Electrical EngineerLas Vegas, NVThe successful candidate will be well versed in high voltage power supplies, modulators, and control circuits, and Varex welcomes applications from persons in a range from knowledgeable to expert level in these fields. The individual will conduct feasibility studies and testing on new and modified designs as well as direct support personnel in the preparation of detailed design, testing, and prototype fabrication.
Sr. Electrical Engineer Varex ImagingSr. Electrical EngineerLas Vegas, NVThe successful candidate will be well versed in high voltage power supplies, modulators, and control circuits, and Varex welcomes applications from persons in a range from knowledgeable to expert level in these fields. The individual will conduct feasibility studies and testing on new and modified designs as well as direct support personnel in the preparation of detailed design, testing, and prototype fabrication.
Sr. Electrical Engineer, Automated Test Equipment Tesla IncSr. Electrical Engineer, Automated Test EquipmentReno, NVThis group designs and builds data-driven automated test equipment supporting Tesla's power electronics and battery production lines. You'll play a key role in developing the "machine that builds the machine," working closely with product design and manufacturing teams worldwide.
Senior Electrical Design Engineer Redwood Materials IncSenior Electrical Design EngineerNVAs a Senior Electrical Design Engineer, you will play a critical role collaborating across electrical, mechanical, process, and controls teams to design and review electrical control systems and infrastructure for Redwood Materials'' cutting-edge facilities. Design high-performance electrical control systems, industrial control panels, motion control systems, wiring harnesses, network layouts, and I/O interfaces aligned with company goals.
Simulation Systems Engineer (Electrical OR Mechanical) - 29416 Huntington Ingalls Industries IncSimulation Systems Engineer (Electrical OR Mechanical) - 29416Nellis AFB, NV$93,791–$130,000 / yearRapid and effective problem solving: identify issues, analyze and interpret data and develop innovative solutions to a variety of complex problems; Excellent communication skills to document, develop, and present technical issues so that stakeholders across the organization readily understand the content and their related actions; Schedule performance: influencing and collaborating across the organization to result in contract schedule success. HII Mission Technologies is seeking an Simulation Systems Engineer to work on a team executing integration efforts on the Modeling, Simulation, and Training environment at the Joint Integrated Test and Training Center - Nellis (JITTC-N), Nellis AFB, NV to support the U.S. Air Force Warfare Center, Joint Simulation Environment (JSE) team.
Field Engineer Aggreko LtdField EngineerReno, NVYou'll work with electrical engineers and project managers to install electrical systems as required for Power, HVAC and Oil Free Air for gas and hybrid power plant projects. What you'll do as Field Engineer: Commissioning (cold and hot) and full validation of hybrid systems at project sites for Aggreko Microgrid and Storage Solutions (AMSS).
Staff Electrical Engineer Kforce Inc.Staff Electrical EngineerCarson City, NV$73–$116Employee pay is based on factors like relevant education, qualifications, certifications, experience, skills, seniority, location, performance, union contract and business needs. Interface with utilities and ISO/RTOs to support interconnection studies/submittals, permitting, and compliance for new renewable and BESS projects.
xPL Mechanical Engineer Turner Construction CoxPL Mechanical EngineerLas Vegas, NVEssential Duties & Key Responsibilities: Develop mechanical designs for xPL Offsite Manufacturing (OSM) products and systems, including flow diagram development, equipment and component selections, submittal development, and system optimization. Position Description: Design mechanical systems (including developing flow diagrams, selecting equipment and materials, and pipe sizing) for offsite manufactured and modular building components.
Senior Electrical Design Engineer Redwood MaterialsSenior Electrical Design EngineerMcCarran, NVAs a Senior Electrical Design Engineer, you will play a critical role collaborating across electrical, mechanical, process, and controls teams to design and review electrical control systems and infrastructure for Redwood Materials' cutting-edge facilities. Design high-performance electrical control systems, industrial control panels, motion control systems, wiring harnesses, network layouts, and I/O interfaces aligned with company goals.
Electrical Engineer_Senior Associate PricewaterhouseCoopers LLPElectrical Engineer_Senior AssociateLas Vegas, NV$77,000–$202,000 / yearAdditional Educational Requirements: Bachelor's degree or in lieu of a degree, demonstrating, in addition to the minimum years of experience required for the role, three years of specialized training and/or progressively responsible work experience in technology for each missing year of college. PwC does not intend to hire experienced or entry level job seekers who will need, now or in the future, PwC sponsorship through the H-1B lottery, except as set forth within the following policy: https://pwc.to/H-1B-Lottery-Policy .
NewReliability Engineer Coeur Mining IncReliability Engineerlovelock, NVRochester's fleet of equipment includes a Komatsu PC4000 and Hitachi 2600 face shovels, three CAT 994K loaders, twenty-six CAT 789 Haul Trucks, two CAT 6250 Drills, two DML Drills, one Epiroc 235 Viper Drill, six CAT D10 Dozers and miscellaneous support Water Trucks, Graders, RTD equipment and an assortment of medium and light duty vehicles. This is a mid-level to senior engineering position, (DOE) expected to work independently on moderately complex assignments, lead cross-functional improvement efforts, and provide technical guidance to planners, supervisors, technicians, and junior engineers.
Senior Electronics Design Engineer AmperesandSenior Electronics Design EngineerReno, NevadaWe’ve built a new class of intelligent, software-defined power infrastructure products leveraging a decade of advanced medium voltage Solid State Transformer research that’s now ready for commercial deployment. As a Senior Electronics Design Engineer, you will design and develop the low-voltage and mixed-signal hardware that controls, senses, and protects our Solid-State Transformer (SST) subsystems.
Production Controls Engineer American Battery Technology CompanyProduction Controls EngineerReno, NV$60,000–$120,000 / yearAmerican Battery Technology Company (ABTC) provides technical development and commercialization of domestic, sustainable sourcing of critical battery materials through lithium-ion battery recycling and battery metal extraction technologies for use in batteries that power electric cars, grid storage applications, and consumer electronics and tools. As our Production Controls Engineer, you will operate and maintain best-in-class control systems for the chemical process systems of our proprietary lithium-ion battery recycling facility and primary resource extraction technologies.
Staff Mechanical Design Engineer, Big Machines Redwood Materials IncStaff Mechanical Design Engineer, Big MachinesNV$147,500–$235,000 / yearJoin the Big Machines team at Redwood Materials, where we develop high-performance equipment-such as 200 ton kilns, meter long knife gates, rotary seals, and complex 30m+ conveyance systems-built to operate reliably at 900°C in some of the most corrosive, debris-laden environments on Earth. We're looking for creative problem solvers who can tackle complex mechanical systems-people who think both tactically and strategically to deliver durable, long-term solutions.
Senior Automation Controls Engineer AmperesandSenior Automation Controls EngineerReno, NevadaResponsibilities include developing comprehensive electrical and pneumatic schematics, leading the programming and integration of control systems—including PLCs, safety systems, HMIs, servo drives, process instrumentation, and robotics—from initial power-up through debugging, optimization, and final validation. We’ve built a new class of intelligent, software-defined power infrastructure products leveraging a decade of advanced medium voltage Solid State Transformer research that’s now ready for commercial deployment.
Automation Controls Software Engineer The Boring CompanyAutomation Controls Software EngineerLas Vegas, NevadaToday, we are creating the technology to increase tunneling speed and decrease costs by a factor of 10 or more with the ultimate goal of making Hyperloop adoption viable and enabling rapid transit across densely populated regions. In this role you will play a critical role in keeping tunneling operations running through the development, implementation, and maintenance of the automation controls systems used in our groundbreaking tunneling operations.
Field Engineer AggrekoField EngineerReno, NVYou'll work with electrical engineers and project managers to install electrical systems as required for Power, HVAC and Oil Free Air for gas and hybrid power plant projects. What you'll do as Field Engineer: Commissioning (cold and hot) and full validation of hybrid systems at project sites for Aggreko Microgrid and Storage Solutions (AMSS).
Senior Instrumentation & Controls Engineer Fervo EnergySenior Instrumentation & Controls EngineerReno, NVWe are seeking engineers who are excited by Fervo's mission, the opportunity to drive meaningful and impactful innovation, and the prospect of maintaining extreme ownership over the cost and constructability implications of their designs, knowing that each decision they make impacts the speed and scale of Fervo's mission. You will apply advanced engineering judgment and first-principles analysis to develop high-performance, cost-effective plant designs, while mentoring junior engineers and influencing cross-disciplinary decision-making.
Instrumentation & Controls Engineer Fervo EnergyInstrumentation & Controls EngineerReno, NVYou will apply advanced engineering judgment and first-principles analysis to develop high-performance, cost-effective plant designs, while mentoring junior engineers and influencing cross-disciplinary decision-making. Review Piping and Instrumentation Diagrams (P&IDs) and instrument datasheets; size and select instrumentation including control valves, flow meters, pressure transmitters, and safety valves.
Commissioning Engineer ECNS Global Consultants PLLCCommissioning EngineerReno, NVRemote$32–$89 / hourFull timeBachelor's Degree (B.S.) or Master's Degree (M.S.) in electrical engineering from a college/university accredited by the Accreditation Board for Engineering and Technology, Inc. (ABET). Collaboration Across Teams : Effective collaboration across diverse teams ensures projects benefit from collective expertise and shared goals.
Electrical Engineer, Water Stantec IncElectrical Engineer, WaterLas Vegas, NVYou will perform a variety of tasks which may include conducting field investigations, liaising with clients and/or contractors, preparing design calculations, leading the development of construction packages (drawings and specifications), estimating construction costs, and contributing to business development activities. Primary Location: United States | AZ | Chandler Organization: BC-2243 Water-US Delivery Employee Status: Regular Business Justification: New Position Travel: Yes Schedule: Full time Job Posting: 16/06/2026 03:06:59 Req ID: 1003177.
Senior Electrical Engineer, Water Stantec IncSenior Electrical Engineer, WaterLas Vegas, NVYou will perform a variety of tasks which may include conducting field investigations, liaising with clients and/or contractors, preparing design calculations, leading the development of construction packages (drawings and specifications), estimating construction costs, and contributing to business development activities. Primary Location: United States | AZ | Phoenix Organization: 2243 Water-US Delivery-Phoenix AZ Employee Status: Regular Business Justification: New Position Travel: No Schedule: Full time Job Posting: 16/06/2026 03:06:54 Req ID: 1002438.