UNKNOWN

FEED

Responsive recruiter Department: Engineering Reports To: Senior Engineering Manager Location: Oviedo, Florida – 100% In-Office Employment Type: Full-Time Travel: Up to 25% Hiring Status: Immediate / Urgent Hire Position Summary CURIS is urgently seeking a mid-level Systems Engineer to join our Engineering team at our Oviedo, Florida headquarters. Source, evaluate, and manage vendors for engineering components and materials, including identifying qualified suppliers, obtaining and comparing quotes, coordinating technical requirements, monitoring lead times and deliverables, and addressing vendor performance or quality issues.

Curis System

Systems Engineer with Project Management

ea_via_bold

Our talented team of employees worldwide helps bring movies to your seat on airplanes, deliver mission-critical information from drones to the command office, transfer heart rhythm to paper, route communications from space, connect power to downhill oil drills, and get planes back in the air faster. The Thermoplastics Extrusion Engineer supports process improvements, scrap reduction, sustaining engineering, capital equipment specification, qualification, and technical support for all Thermoplastic Extrusion manufacturing processes such as fluoropolymer extrusion and silicone extrusion.

Amphenol CIT

Extrusion Engineer

linkup_via_bold

Our talented team of employees worldwide helps bring movies to your seat on airplanes, deliver mission-critical information from drones to the command office, transfer heart rhythm to paper, route communications from space, connect power to downhill oil drills, and get planes back in the air faster. Common characteristics of a work environment in a manufacturing plant are the use of machinery and exposure to hazards such as chemicals, heat, dust, or noise, with a culture of teamwork, communication, and continuous improvement.

Manufacturing Engineer I

Our talented team of employees worldwide helps bring movies to your seat on airplanes, deliver mission-critical information from drones to the command office, transfer heart rhythm to paper, route communications from space, connect power to downhill oil drills, and get planes back in the air faster. The Product Design Engineer collaborates with customers, Sales/Customer Service, Product Management, Engineering, Supply Chain, Quality, and New Product Development teams to design and cost wire and cable products for manufacturability.

Product Design Engineer II

Nammo employees working at the Florida site manufacture all types of 40mm low and high velocity ammunition; pyrotechnic marking; signaling and tactical illumination devices; battlefield effects training simulators; demolition charges; hand grenade fuzes; and other ammunition components. They will collaborate with their Program team in assessing, developing and executing process improvement initiatives and operational enhancement programs that deliver strategic value and profitable growth for their business.

Nammo Defense Systems

sourcestack_via_bold

YEAR

Job Overview: We are seeking a Reliability Engineer Mechanical Fixed Equipment to join the maintenance and reliability team at a premium fibers and polymers manufacturing facility in Pensacola, FL. Strong knowledge of ASME and API codes (ASME I, VIII, B31.1, B31.3; API 510, 570, 576, 653).

Macpower Digital Assets Edge Private Limited

Reliability Engineer Mechanical / Fixed Equipment

jobdiva

The successful candidate will also support multi-disciplinary teams in the scoping and preparation of Site Characterization Reports (SCRs), development of Risk-Based Corrective Action Plans (CAPs), Remedial Action Plans (RAPs), Voluntary Cleanup Program (VCP) applications, monitoring remedial systems performance and overseeing the preparation of Operations and Maintenance (O&M) reports, and Discharge Monitoring Reports (DMRs). Projects may include soil removal actions, remedial injections, soil vapor assessments, and vapor intrusion mitigation system designs, as well as groundwater remediation systems, including mechanical, electrical, plumbing (MEP), Instrumentation and Controls (I&C), permitting, and operations & maintenance (O&M) functions.

Terracon

Senior Environmental Site Investigation/Remediation Engineer

ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. While preparing the pads for launch, you will be responsible for ensuring all aspects of launch pad GSE (ground support equipment) have been properly inspected, configured, and tested to support Falcon 9 and Falcon Heavy interface requirements.

Space Exploration Technologies Corp

Launch Pad Engineer, Fluid Systems

Your Responsibilities: The Sales Engineer will report to the Sales Manager and will be responsible for business development of agreed upon larger scale sales targets within the Florida region selling fluid solutions via a comprehensive line of value-added metal working fluids and related lubricants. They will be responsible for, but not limited to the following: Drive new business development calling at the corporate and engineering level of accounts while working collaboratively with the Sales Manager, Sales Director, Product Manager; and other key team members to establish priorities and achieve objectives.

Fuchs SE

Sales Engineer

Our products include advanced surveillance sensors, unmanned air and ground vehicles, sensing devices used to detect chemicals, biological agents, radiation and explosives, and a host of other solutions that help warfighters, first responders, and search-and-rescue teams do their jobs better. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research.

Teledyne Technologies Inc

Sr. Electrical Engineer, Digital Hardware (US Citizenship Required)

In this role, you'll help shape future product architectures while working with cutting-edge technologies including embedded processors, FPGAs, SoCs, high-speed digital interfaces, advanced sensor systems, and low-power electronics. Our products include advanced surveillance sensors, unmanned air and ground vehicles, sensing devices used to detect chemicals, biological agents, radiation and explosives, and a host of other solutions that help warfighters, first responders, and search-and-rescue teams do their jobs better.

Teledyne Technologies

Senior Electrical Engineer - Embedded & Digital Hardware ((Us Citizenship Required)

A Project Engineer supporting the Operations or Field Operations departments may have responsibility for the following: Creates project management documentation that may include schedules, material purchases, cost management, progress charts, RFIs, submittals, meeting minutes, jobsite controls, tracking reports, etc. Computes cost factors and prepares estimates used for bidding and budgeting purposes including self-performed work; selecting subcontractors; and determining cost effectiveness and cost realism.

MW Builders Inc

Project Engineer - GC (Spring/Summer 2027)

The right candidate will enrich our team of engineers and scientists in providing field and office support and solutions to address contaminants such as PFAS, 1,4-dioxane, chlorinated solvents, petroleum, and heavy metals for sites regulated under state, CERCLA, and RCRA laws. An experienced Environmental Remediation Associate Engineer ready to support a design team using innovative remedial technologies to address various contaminants in soil, groundwater, industrial wastewater, stormwater, and air.

EnSafe Inc.

Environmental Remediation Associate Level Engineer

GreenHouseAPI

We are seeking a Senior Environmental Remediation Project Engineer who is ready to support and manage a variety of projects using innovative remedial technologies to address various contaminants in soil, groundwater, industrial wastewater, stormwater, and air. The right candidate will enrich our team of engineers and scientists in providing solutions to address contaminants such as PFAS, 1,4-dioxane, chlorinated solvents, and heavy metals for sites regulated under state, CERCLA, and RCRA laws.

Senior Environmental Remediation Project Engineer

We are seeking a Mid-Level Engineer who is ready to support electrical engineering designs, especially instrumentation and controls, across a variety of projects, including environmental remediation systems, industrial wastewater treatment systems, process engineering for active industrial/manufacturing facilities, and stormwater management. Hands-on expertise in the design, fabrication, troubleshooting, and installation of industrial control panels and motor control centers, including equipment selection, procurement, conduit sizing/installation, and wire terminations.

Mid-Level Instrumentation and Controls Engineer

TEMPORARY

Gas Transmission Interconnect & Hydraulic Design: Interface with Facilities Engineers to design high-pressure pipeline tie-ins, meter and regulation (M&R) stations, custody-transfer ultrasonic metering skids, gas chromatographs, pressure/flow control valves, and pipeline surge/thermal transient analyses. * Engineering Contractor (FEED/EPC) Management: Reviews external engineering consultants work product and provides technical direction to Engineering consultants and EPC contractors through conceptual design, FEED, and detailed engineering; with a focus on optimization and technical quality.

HOUR

Westinghouse

LNG Project Engineer

The Lab Engineer will work closely with laboratory analysts, laboratory management, vendors, and service providers to identify equipment issues, determine root causes, perform corrective. The position will primarily support chromatographic and mass spectrometry instrumentation, including HPLC, GC-MS, ICP-MS, and LC-MS systems from manufacturers such as Shimadzu, Agilent, Thermo Fisher Scientific, and SCIEX/AB Sciex.

SGF Global Inc

Lab Engineer

The ideal candidate will have hands-on experience in 3+2, 4, & true 5-axis milling, and 7 & 8-axis lathe turning, and will play a key role in quoting, Lean Manufacturing, process design, first-piece setup of new products, and problem-solving within our production environment. Create detailed machining processes, tool paths, and cutting strategies tailored for aerospace alloys (e.g., Exotics, stainless steel, aluminum) and tight tolerances of ±0.0002 / ±0.005.

<p>AO Precision was originally founded in 1982 as Advanced Ordnance, Inc. The company’s original business focused on making machined parts for Colt, SIG Sauer, FN, Smith & Wesson and OF Mossberg.

Since Juno Investments LLC acquired AO Precision in 2004, Juno’s investment of capital into machinery and equipment has improved the efficiency and productivity of the company, resulting in double-digit sales growth and an expanded workforce. The company has widened its customer base beyond ordnance manufacturing to include agricultural, marine, automotive and medical OEMs.

AO Precision Manufacturing LLC is a reliable partner to the world’s leading aerospace and defense companies. Our AS9100-certified, Florida-based, build-to-print precision machine shop is Nadcap accredited and ISO 9001:2008 compliant. It specializes in close tolerance contract machining of carbon and stainless steels, super-alloys, plastics and phenolic resin compounds. We provide turnkey production solutions that start with design assistance and continue with prototyping, CNC milling & turning, finishing, phosphating, anodizing, laser etching, assembly, inspection, and packaging. Our engineers design and produce special tooling, fixtures, and gauges to ensure that your order is competitively priced and meets tight production deadlines.

Related Companies
AO Precision also draws upon the complementary resources and expertise of three sister companies under the Juno umbrella:

Galion LLC, a build-to-print source for screw-machined parts for the automotive, commercial, and defense industries. The company’s equipment includes single and multi-spindle turning, CNC turning, and Swiss micromachining. Centerless grinding allows Galion to repeatedly hold tolerances to .0002″. Galion is ISO 9001:2008 certified. Its 100,000 square foot plant is located in northwest Ohio.

Southeastern Metal Products LLC (SEMP), a metal stamping and fabrication company. SEMP’s manufacturing and engineering expertise enables the company to manage any type of project ranging from build-to-print to assisting in product design for manufacturability. SEMP’s customers include companies in the telecommunications, health and safety, trucking, off-road vehicle and agriculture industries. SEMP is ISO 9001:2008 certified. The company’s 100,000 square foot facility is situated in Charlotte, North Carolina.

Optim LLC, a medical device manufacturer, has an in-house machining operation, Optim Machining Services (OMS). OMS is an ISO 9001:2008 and ISO 13485 certified contract services company specializing in close tolerance CNC turning, milling and drilling for the medical industry. The company operates out of a 5,000 square foot facility in central Massachusetts. </p>

AO Precision Manufacturing

CNC Programmer/Manufacturing Engineer

This role identifies emerging equipment risks, predicts failures, optimizes maintenance strategies, and improves unit availability, reliability, and cost performance by developing and operationalize predictive models using plant historian, maintenance, inspection, operational, and condition-monitoring data. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information.

<p>NextEra Energy, Inc. (NYSE: NEE) is a leading clean energy company with consolidated revenues of approximately $17.5 billion and approximately 14,300 employees in 27 states and Canada as of year-end 2015, as well as approximately 45,000 megawatts of generating capacity, which includes megawatts associated with noncontrolling interests related to NextEra Energy Partners, LP (NYSE: NEP) as of April 2016. Headquartered in Juno Beach, Fla., NextEra Energy’s principal subsidiaries are Florida Power & Light Company, which serves more than 4.8 million customer accounts in Florida and is one of the largest rate-regulated electric utilities in the United States, and NextEra Energy Resources, LLC, which, together with its affiliated entities, is the world’s largest generator of renewable energy from the wind and sun. Through its subsidiaries, NextEra Energy generates clean, emissions-free electricity from eight commercial nuclear power units in Florida, New Hampshire, Iowa and Wisconsin. A Fortune 200 company and included in the S&P 100 index, NextEra Energy has been recognized often by third parties for its efforts in sustainability, corporate responsibility, ethics and compliance, and diversity, and has been ranked No. 1 in the electric and gas utilities industry in Fortune’s 2016 list of “World's Most Admired Companies.”</p>

NextEra Energy Inc

Power Generation Engineer

4-year degree in a technical discipline plus, a minimum of 2 years direct industry experience in a similar role to include new product introduction or integration, or an equivalent combination of education and experience. Receives training on all aspects of manufacturing products from the OEM (traveling to OEM site) and transitioning this knowledge to Extant manufacturing, including training of Extant personnel.

Chemical Engineer Jobs in Florida

Systems Engineer with Project Management Curis System

Extrusion Engineer Amphenol CIT

Manufacturing Engineer I Amphenol CIT

Product Design Engineer II Amphenol CIT

Manufacturing Engineer I Nammo Defense Systems

Reliability Engineer Mechanical / Fixed Equipment Macpower Digital Assets Edge Private Limited

Senior Environmental Site Investigation/Remediation Engineer Terracon

Launch Pad Engineer, Fluid Systems Space Exploration Technologies Corp

Sales Engineer Fuchs SE

Sr. Electrical Engineer, Digital Hardware (US Citizenship Required) Teledyne Technologies Inc

Senior Electrical Engineer - Embedded & Digital Hardware ((Us Citizenship Required) Teledyne Technologies

Project Engineer - GC (Spring/Summer 2027) MW Builders Inc

Environmental Remediation Associate Level Engineer EnSafe Inc.

Senior Environmental Remediation Project Engineer EnSafe Inc.

Mid-Level Instrumentation and Controls Engineer EnSafe Inc.

LNG Project Engineer Westinghouse

Lab Engineer SGF Global Inc

CNC Programmer/Manufacturing Engineer AO Precision Manufacturing

Power Generation Engineer NextEra Energy Inc

Manufacturing Engineer Extant Components Group Holdings, Inc.

Similar Job Searches

Stand out to leading employers.