Controls and Instrumentation Engineer RoehmControls and Instrumentation EngineerWallingford, CTFull timeProvides engineering support to Maintenance and Production to safely and cost effectively coordinate ongoing maintenance of current process automation systems, control systems, and instrumentation. Seek out and initiate process changes to improve the safety, environmental security, industrial hygiene, loss prevention, product quality, efficiency, or cost of the department.
HVAC Building Controls Application Engineer Johnson ControlsHVAC Building Controls Application EngineerConnecticut$80,000–$110,000 / yearBachelor’s degree in engineering with a minimum of three years of experience, or an associate degree in a related technical field with five years of relevant work experience required; or equivalent work experience (with no degree) as a commercial HVAC Controls Technician, Engineer, or Installer. Associate degree in a related technical field with two years of relevant work experience required; or equivalent work experience (with no degree) as a commercial HVAC Controls Technician, Engineer, or Installer.
Manufacturing Automation & Controls Engineer Top Prospect Group LLCManufacturing Automation & Controls EngineerWatertown, CTLead engineering projects by creating project timelines, designing control systems, developing schematics, ordering components, programming equipment, debugging systems, and providing post-launch support. Position SummaryThe Controls & Manufacturing Engineer is responsible for providing a combination of manufacturing engineering and electrical controls engineering support for new production equipment and manufacturing operations.
["Protection and Control Engineer","Protection and Control Engineer"] Green Mountain Power["Protection and Control Engineer","Protection and Control Engineer"]Colchester$78,000–$130,000 / yearThis role is an important part of the Engineering team and requires a broad set of detail-orientated technical skills, the desire to continually evolve to support new initiatives for customers, and strong communication skills to build trusting and effective relationships with teammates in Engineering and Operations. In 2024, 2023 and 2021 the Smart Electric Power Alliance (SEPA) honored GMP as a nationwide leader in energy transformation.
CDS Mechanical Controls Product Center, Senior Engineer P3 (Onsite) RTXCDS Mechanical Controls Product Center, Senior Engineer P3 (Onsite)East Hartford, ConnecticutCSEE engineering work the entire system life cycle from 1) control system technology development, 2) interpreting customer requirements, decomposing them to hardware and software, 3) technical and project oversight of hardware implementation, to 4) ensuring control system compliance across engine, flight and customer compliance testing, and finally, 5) leading system and hardware field issue triage and resolution. The CDS CSEE is responsible for the end- to-end CDS systems Engineering Value Stream covering four sub-disciplines: System Architecture, Requirements & Validation (SARV), Electric Propulsion Systems Engineering (EPSE), Hardware Sub-systems Requirements & Validation (HWSS) and Engine & Flight Test (E&FT).
CDS Mechanical Controls Product Center, Senior Engineer P3 (Onsite) RTX CorpCDS Mechanical Controls Product Center, Senior Engineer P3 (Onsite)East Hartford, CTCSEE engineering work the entire system life cycle from 1) control system technology development, 2) interpreting customer requirements, decomposing them to hardware and software, 3) technical and project oversight of hardware implementation, to 4) ensuring control system compliance across engine, flight and customer compliance testing, and finally, 5) leading system and hardware field issue triage and resolution. The CDS CSEE is responsible for the end- to-end CDS systems Engineering Value Stream covering four sub-disciplines: System Architecture, Requirements & Validation (SARV), Electric Propulsion Systems Engineering (EPSE), Hardware Sub-systems Requirements & Validation (HWSS) and Engine & Flight Test (E&FT).
Senior Engineer - Protection & Control AtkinsRealisSenior Engineer - Protection & ControlOrange, CT$110,000–$150,000 / yearNote to staffing and direct hire agencies: In the event a recruiter or agency who is not on our preferred supplier list submits a resume/candidate to anyone in the company, AtkinsRéalis family of companies, we explicitly reserve the right to recruit and hire the candidate(s) at our discretion and without any financial obligation to the recruiter or agency. The Protection & Controls Engineer reports to our Protection & Controls Technical Manager and requires working independently on fast paced technically complex design projects.
Senior Controls Sales Engineer Stark TechSenior Controls Sales EngineerEast Granby, CONNECTICUT$114,000–$150,000 / yearThe Senior Sales Engineer is responsible for driving new construction ("green field") project pursuits and cultivating strong relationships with key industry stakeholders, including Consulting Engineers, General Contractors, and Mechanical Contractors. We specialize in integrating systems, providing energy-efficient equipment and services, and supporting sustainability through innovative technologies like renewable natural gas conversion and energy storage solutions.
Senior Engineer - Protection & Control AtkinsRealis Group IncSenior Engineer - Protection & ControlOrange, CT$110,000–$150,000 / yearNote to staffing and direct hire agencies: In the event a recruiter or agency who is not on our preferred supplier list submits a resume/candidate to anyone in the company, AtkinsRéalis family of companies, we explicitly reserve the right to recruit and hire the candidate(s) at our discretion and without any financial obligation to the recruiter or agency. The Protection & Controls Engineer reports to our Protection & Controls Technical Manager and requires working independently on fast paced technically complex design projects.
Accuracy Control Engineer General Dynamics CorpAccuracy Control EngineerGroton, CTThe job requires the Engineer to develop configuration controlled dimensional control documents and procedures, work with metrology Technicians to determine the proper tooling for the job, work with metrology Technicians to review site conditions for 3-dimensional surveys, and process as-built data for further shipyard direction or reporting, while working safely and with a high degree of accuracy. The Accuracy Control & Optical Tool team is responsible for all phases of the dimensional control process in shipbuilding:dimensional control requirement definition and work control, job planning, execution, processing and presentation of as-built data, and continuous improvement.
Fly-By-Wire & Secondary Control System Engineer Kaleidoscope Animations (Inactive)Fly-By-Wire & Secondary Control System EngineerWindsor, CTYou possess a good understanding of all facets of system definition, integration, and certification and have a knowledge of aircraft systems and interfaces (e.g., electrical, hydraulic, avionics, autoflight). You have the ability to work with limited supervision, be organized, a team player, and a self-motivated person, be Customer focused, and be able to work under pressure.
Accuracy Control Engineer EI/II Electric Boat CorpAccuracy Control Engineer EI/IIGroton, CTThe job requires the Engineer to develop configuration controlled dimensional control documents and procedures, work with metrology Technicians to determine the proper tooling for the job, work with metrology Technicians to review site conditions for 3-dimensional surveys, and process as-built data for further shipyard direction or reporting, while working safely and with a high degree of accuracy. The Accuracy Control & Optical Tool team is responsible for all phases of the dimensional control process in shipbuilding: dimensional control requirement definition and work control, job planning, execution, processing and presentation of as-built data, and continuous improvement.
Accuracy Control Engineer EI/II General Dynamics Electric BoatAccuracy Control Engineer EI/IIGroton, ConnecticutFull timeThe job requires the Engineer to develop configuration controlled dimensional control documents and procedures, work with metrology Technicians to determine the proper tooling for the job, work with metrology Technicians to review site conditions for 3-dimensional surveys, and process as-built data for further shipyard direction or reporting, while working safely and with a high degree of accuracy. The Accuracy Control & Optical Tool team is responsible for all phases of the dimensional control process in shipbuilding: dimensional control requirement definition and work control, job planning, execution, processing and presentation of as-built data, and continuous improvement.
Electrical Control Systems Engineer Power-Flo Technologies IncElectrical Control Systems EngineerMiddletown, CTPower-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. Power-Flo Technologies New England is now hiring an Electrical Control Systems Engineer to lead automation projects from initial design and programming through start-up.
HVAC Control Systems Application Engineer Johnson Controls International PlcHVAC Control Systems Application EngineerRocky Hill, CT$68,000–$95,000 / yearBachelor's degree in engineering with a minimum of three years of experience, or an associate degree in a related technical field with five years of relevant work experience required; or equivalent work experience (with no degree) as a commercial HVAC Controls Technician, Engineer, or Installer. Demonstrated knowledge of control theory, automatic temperature controls, building automation systems and other building subsystems from a design, installation, and/or commissioning perspective.
Staff Project Controls Specialist GTTStaff Project Controls SpecialistWallingford, CTThe Staff Project Controls Specialist will lead project controls processes in partnership with internal project management teams to ensure delivery of project milestones on schedule and within budget. • Bachelor’s degree in Engineering, Construction Management, or related field with 3+ years of direct project controls experience.
Engineer, Control Center Doosan CorpEngineer, Control CenterSouth Windsor, CTEducation & Experience: Bachelor's degree in engineering or Associate's degree plus 3 years of experience in field service engineering, systems engineering, troubleshooting, or system controls. The Control Center Engineer will respond to all customer requests, document all fuel cell alarms, and provide work instructions for the Field Service Technicians that will complete repairs at the fuel cell locations.
Senior Ship Control Systems Engineer - Groton, CT SercoSenior Ship Control Systems Engineer - Groton, CTHartford, CTMajor System knowledge – Main/Aux Steam, Steam Drains and Gland steam, Feed and Feed Transfer, Lub Oil and Lub oil Transfer, Main Circ (MSW equivalent) and Shaft seal - This includes oversight of all valves, pumps, fittings, gauges as part of the system that are not part of the equipment group. PMS450 is the acquisition program office for the New Construction of Attack Submarines and for identifying, assembling, managing, directing, and coordinating the resources required for the R&D, design, construction, Test and Evaluation (T&E), Live Fire Test and Evaluation (LFT&E), and Fleet introduction of the U.S. Navy’s newest class of nuclear attack submarines.
Payload Launch Control Systems Engineer - Entry Level General Dynamics CorpPayload Launch Control Systems Engineer - Entry LevelGroton, CTThe D440 SSN Payload Launch Control department is responsible for systems, hardware, test, and project engineering for the design, development, and qualification of payload launch control and handling systems and components supporting VIRGINIA, SSNX, and AUKUS class submarines and other payload platforms. These systems are mission and safety critical and comprised of embedded closed loop complex electronic control systems having stringent safety and security requirements, in addition to requiring high reliability, availability, maintainability and usability.
Experienced Systems Engineer - Payload Launch Control (Senior, Specialist, Principal) General Dynamics CorpExperienced Systems Engineer - Payload Launch Control (Senior, Specialist, Principal)Groton, CTGeneral Dynamics Electric Boat is a recognized leader in the design, construction and lifecycle support of submarines for the United States Navy. The position requires an engineer to lead Government vendors, sub-contractors and other GDEB departments in the development and maintenance of a complex submarine test and training asset.
Communications Systems Test Engineer: Senior/Specialist/Principal– Ship Control General Dynamics Electric BoatCommunications Systems Test Engineer: Senior/Specialist/Principal– Ship ControlGroton, ConnecticutFull timeOverview: Ship Control develops in-house electronic systems and integrates vendor/government supplied equipment to support the VA/CLB Ship Control System (SCS), VA/CLB Monitoring Systems, and the VA/CLB Portable Ship Control Systems (PSCS). The selected candidate will be part of a high-performing, detail-oriented team that fulfills engineering tasks related to initial hardware production, shipboard installation, test, delivery, and at-sea testing of Ship Control components.
Communications Systems Test Engineer: Senior/Specialist/Principal Ship Control General Dynamics CorpCommunications Systems Test Engineer: Senior/Specialist/Principal Ship ControlGroton, CTThe selected candidate will be part of a high-performing, detail-oriented team that fulfills engineering tasks related to initial hardware production, shipboard installation, test, delivery, and at-sea testing of Ship Control components. Ship Control develops in-house electronic systems and integrates vendor/government supplied equipment to support the VA/CLB Ship Control System (SCS), VA/CLB Monitoring Systems, and the VA/CLB Portable Ship Control Systems (PSCS).
Experienced Systems Engineer Payload Launch Control (Senior, Specialist, Principal) Electric Boat CorpExperienced Systems Engineer Payload Launch Control (Senior, Specialist, Principal)Groton, CTThe position requires an engineer to lead Government vendors, sub-contractors and other GDEB departments in the development and maintenance of a complex submarine test and training asset. Department 440: Payload Launch Control Systems Engineering group supporting SEAWOLF, VIRGINIA and COLUMBIA programs.
Experienced Systems Engineer - Payload Launch Control (Senior, Specialist, Principal) General Dynamics Electric BoatExperienced Systems Engineer - Payload Launch Control (Senior, Specialist, Principal)Groton, ConnecticutFull timeThe position requires an engineer to lead Government vendors, sub-contractors and other GDEB departments in the development and maintenance of a complex submarine test and training asset. Overview: Department 440: Payload Launch Control Systems Engineering group supporting SEAWOLF, VIRGINIA and COLUMBIA programs.
Engineer - Protection & Control IberdrolaEngineer - Protection & ControlOrange, ConnecticutTheoretical Engineering knowledge - Planning, Operations and Engineering Design, Analytic, modeling & Calculation, understanding the business model; Global View of the Business (Values cross-functional collaboration, understands importance of growing knowledge and developing relationships and links across the organization). This is applicable to employees that will work in electric transmission, operations, and cyber security business areas in Connecticut, Maine, Massachusetts, and New York within Avangrid Network and Corporate business areas.
Controls System Designer Flow Tech, Inc.Controls System DesignerSouth Windsor, CT$90,000–$120,000 / yearLay out of system wiring and prepare formal Submittals, O&M’s, and As-built documents following our established Flow Tech format, using AutoCAD LT, Bluebeam, and Aircuity Engineering software tools. After much growth and success, Flow Tech has become a go-to source for building owners, design engineers and contractors made up of 30+ employee owners and 20+ sustainability-focused product lines.
Building Automation Controls Designer Johnson Controls International PlcBuilding Automation Controls DesignerRocky Hill, CT$32.07–$48.13 / hourJohnson Controls, a global leader in thermal management, mission-critical building systems, energy efficiency, and decarbonization, helps customers use energy more productively, reduce carbon emissions, and operate with the precision and resilience required in rapidly expanding industries such as data centers, healthcare, pharmaceuticals, advanced manufacturing, and higher education. Minimum of three years of experience with installing and/or commissioning Johnson controls Metasys systems including system-level controllers, and working knowledge and experience using Metasys Tools: RAC schedule, CCT, SCT, Visio.
Lead Engineer - Protection & Control IberdrolaLead Engineer - Protection & ControlOrange, ConnecticutExperience or knowledge in the following areas is preferred: IEC 61850 (GOOSE Data Models, Sampled Values, MMS), networking, real time simulators, virtualized protection relays, and centralized substation protection. This is applicable to employees that will work in electric transmission, operations, and cyber security business areas in Connecticut, Maine, Massachusetts, and New York within Avangrid Network and Corporate business areas.
HVAC Controls Systems Designer Johnson ControlsHVAC Controls Systems DesignerConnecticutJohnson Controls, a global leader in thermal management, mission-critical building systems, energy efficiency, and decarbonization, helps customers use energy more productively, reduce carbon emissions, and operate with the precision and resilience required in rapidly expanding industries such as data centers, healthcare, pharmaceuticals, advanced manufacturing, and higher education. Experience with installing and/or commissioning controls systems including system-level controllers – or – experience designing or evaluating mechanical/electrical building systems or control systems.
Engineering & Controls Manager Enhance RecruitingEngineering & Controls ManagerRocky Hill, CTWe are seeking an experienced Engineering & Controls Manager to lead a team responsible for electrical design, automation systems, power distribution projects, and engineering operations with a rapidly growing industrial manufacturing organization. This leadership role offers the opportunity to drive innovation, oversee project execution, and support continued company growth within industrial and energy-related markets.
Electrical Controls Specialist Bimbo Bakeries USA, IncElectrical Controls SpecialistGreenwich, Connecticut$91,800–$119,300Physical activities required are climbing, stooping, kneeling, crouching, crawling, reaching, standing, walking, pushing, pulling, lifting, grasping, feeling, twisting, bending, talking and hearing. Review key plant metrics/KPIs and equipment data to identify potential areas for continuous improvement then lead a team to develop an engineered solution.
NewControl Systems Senior Engineer P3 CDS (Onsite) RTXControl Systems Senior Engineer P3 CDS (Onsite)East Hartford, ConnecticutProficient in requirements management using DOORS and system safety analysis (using Isograph Reliability Workbench for fault tree analysis), and MBSE (Model Based System Engineering) for control system architecture & software development. Team members work on multidisciplinary Integrated Product Teams (IPT) to architect, model, develop and integrate state-of-the-art power thermal management systems with propulsion systems and aircraft.
Control Systems Senior Engineer P3 CDS (Onsite) RTX CorpControl Systems Senior Engineer P3 CDS (Onsite)East Hartford, CTQualifications We Prefer: Proficient in requirements management using DOORS and system safety analysis (using Isograph Reliability Workbench for fault tree analysis), and MBSE (Model Based System Engineering) for control system architecture & software development. Team members work on multidisciplinary Integrated Product Teams (IPT) to architect, model, develop and integrate state-of-the-art power thermal management systems with propulsion systems and aircraft.
Flight Control Design/Development Engineer Kaleidoscope Animations (Inactive)Flight Control Design/Development EngineerWindsor, CTEvaluate CLaws and FBW system failures, system stability and performance with analytical methods, desktop simulations, pilot in the loop simulator tests and flight test data. Design and develop pilot in the loop CLaws based on handling quality requirements, flight and structural envelope protection requirements, performance requirements, test pilot assessments and aircraft level requirements.
Instrumentation and Controls Technician Amentum Services IncInstrumentation and Controls TechnicianGroton, CTSix years of experience as an instrumentation and controls technician role including operating and maintaining steam driven turbines for power generation in a pharmaceutical, chemical, industrial, or related laboratory environment, or demonstrated equivalent combination of education and experience. As the Instrumentation & Controls Technician, your daily duties for this role will include: Acting as the subject-matter expert in responding to work orders, troubleshooting, and providing calibration service on the production equipment.
Instrumentation and Controls Technician AmentumInstrumentation and Controls TechnicianConnecticutSix years of experience as an instrumentation and controls technician role including operating and maintaining steam driven turbines for power generation in a pharmaceutical, chemical, industrial, or related laboratory environment, or demonstrated equivalent combination of education and experience. As the Instrumentation & Controls Technician, your daily duties for this role will include: Acting as the subject-matter expert in responding to work orders, troubleshooting, and providing calibration service on the production equipment.
Senior Manager, System Controls (Onsite) RTXSenior Manager, System Controls (Onsite)ConnecticutIn this high-impact leadership role, your technical expertise and strategic direction will directly influence the system architecture, control logic, integration, validation and verification of complex system control solutions across Environmental & Airframe Control Systems (EACS) programs. Manage team to lead system control architecture reviews, non-advocate reviews, and system design reviews—providing critical technical insight to strengthen design integrity, optimize control strategies, mitigate risk, and ensure alignment with overall program/business objectives.
Senior Manager, System Controls (Onsite) RTX CorpSenior Manager, System Controls (Onsite)Windsor Locks, CTIn this high-impact leadership role, your technical expertise and strategic direction will directly influence the system architecture, control logic, integration, validation and verification of complex system control solutions across Environmental & Airframe Control Systems (EACS) programs. Manage team to lead system control architecture reviews, non-advocate reviews, and system design reviews-providing critical technical insight to strengthen design integrity, optimize control strategies, mitigate risk, and ensure alignment with overall program/business objectives.
Automation/Controls Technician/Installer Gables Search GroupAutomation/Controls Technician/InstallerRocky Hill, CTThis role will involve mounting control components, installing low voltage wiring, performing terminations, conducting system start-ups, and troubleshooting systems. The ideal candidate will have hands-on experience with building automation systems, possess a CT E2 or L6 License, and demonstrate the ability to deliver high-quality installations and service.
NewElectrical Engineer Actalent IncElectrical EngineerGlastonbury, CT$31–$41 / hourWorking closely with experienced controls engineers and product specialists, you will gain exposure to advanced control systems, instrumentation, communication networks, rotating equipment, and real-world field applications. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing winner for both client and talent service.
Engine Test & Calibration Engineer LiquidPistonEngine Test & Calibration EngineerSuffield, CTYou will collaborate closely with multidisciplinary engineering teams to plan and execute test campaigns, develop control strategies, automate data workflows, and optimize engine performance across various fuels and operating conditions. Company Summary LiquidPiston is a leader in advanced power solutions, developing innovative, compact, and efficient rotary engines based on its breakthrough High-Efficiency Hybrid Cycle (HEHC).
Engine Test & Calibration Engineer LiquidPiston IncEngine Test & Calibration EngineerSuffield, CTYou will collaborate closely with multidisciplinary engineering teams to plan and execute test campaigns, develop control strategies, automate data workflows, and optimize engine performance across various fuels and operating conditions. LiquidPiston is a leader in advanced power solutions, developing innovative, compact, and efficient rotary engines based on its breakthrough High-Efficiency Hybrid Cycle (HEHC).
Senior I&c Engineer Actalent IncSenior I&c Engineerstonington, CTRemote$65–$90 / hourYou will work closely with clients, project teams, vendors, and fellow engineers to execute plant modifications and modernization projects while providing technical leadership and mentoring to junior engineering staff. The position provides opportunities to work with cutting-edge digital control technologies, PLCs, DCS platforms such as Ovation, and other modern nuclear I&C systems while contributing to critical modernization and digital transformation initiatives in the nuclear power industry.
NewEngineer Trainee(35 Hour) State of ConnecticutEngineer Trainee(35 Hour)Hartford, CT$58,802–$80,052 / yearSpecific duties of this position include: Assisting with engineering assessments including performing emission rate verifications, cost effectiveness studies and evaluation of emissions reduction strategies; Assisting in reviewing analyses of emission inventories for incorporation into regional photochemical grid modeling; Assisting in modeling stationary and/or mobile source emissions for air quality and transportation planning purposes, including developing skills and abilities necessary to run regional photochemical grid models using national inputs and/or Connecticut-specific inputs; Assisting in reviewing proposed federal regulations and performing calculations to quantify their effects on air pollution levels in Connecticut; Assisting in preparing detailed technical and engineering reports; Analyzing monitored air quality data and meteorology to determine interactions and trends; Perform basic technical research in matters related to air quality programs; Attending training to enhance knowledge of sources of air pollution and air pollution control; Assist with analyses of existing state and federal air quality policies, statutes, plans and regulatory programs; Assist with daily air quality forecasts are issued daily and develop associated email and press release communications as needed; and. Bachelor's degree or coursework in engineering, meteorology, mathematics, or the physical sciences; Experience with technical writing and coursework in air pollution and air pollution control; Academic or professional experience with atmospheric chemistry and meteorology; Experience working with photochemical grid models and related outputs; Experience using R or Python and Visual Environment for Rich Date Interpretation (VERDI) or Power Business Intelligence (BI) to analyze and present data; Experience communicating technical information, both verbally and in writing, to technical and non-technical audiences; Experience working independently and in a team environment; and.
Electrical Engineer IV TRC Companies IncElectrical Engineer IVWindsor, CT$117,998.40–$150,000 / yearFrom pipelines to power plants, roadways to reservoirs, schoolyards to security solutions, clients look to TRC for breakthrough thinking backed by the innovative follow-through of an industry leader. TRC has long set the bar for clients who require more than just engineering, combining science with the latest technology to devise innovative solutions that stand the test of time.
Electrical Engineer V Apollo Professional SolutionsElectrical Engineer VBloomfield, CT$88.50–$98.33 / hourThis individual will serve as the technical lead responsible for designing, building, validating, and deploying new test systems; optimizing repair workflows; and improving overall costs and lead times for this core function. The contractor must possess expert-level experience in electronics troubleshooting, power electronics, distributed control system design, test system design, manufacturing process optimization, cell layout design, and operational transitions.
Staff Electrical Engineer FuelCell Energy, Inc.Staff Electrical EngineerDanbury, CTRemote$130,000–$160,000 / yearResumes submitted to any FuelCell Energy employee without a current, signed and valid contract in place with the FuelCell Energy Recruiting team for this position will become the property of FuelCell Energy and no agency fees will be paid. The ideal candidate brings strong experience in power distribution, grid-connected systems, utility coordination, NEC/FC1/UL/CE compliance, arc-flash analysis, and practical execution from concept through commissioning.
Manager, PX, GWE, Utilities Operations Lead Electrical Engineer Pfizer IncManager, PX, GWE, Utilities Operations Lead Electrical EngineerGroton, CT$99,200–$165,400 / yearThe multi-building campus is comprised of 2.3M SQFT supporting an occupancy of ~2,200 colleagues and contractors and has the greatest concentration of specialty operations in the R&D network consisting of small molecule clinical manufacturing, GxP and non-regulated laboratories, vivarium, technical space (central utility plant), and office workspace facilities. This position will provide technical leadership and operational engineering oversight for 24x7x365 electrical generation, distribution, and control systems supporting critical site utility infrastructure and systems within highly technical laboratory and manufacturing environments in support of the R&D operations at the Groton, CT site.
Senior Electrical Engineer - Engineering Labs (Onsite) RTX CorpSenior Electrical Engineer - Engineering Labs (Onsite)Windsor Locks, CTDesign and build advanced test environments that simulate real-world operating conditions for aerospace products including aircraft systems, Environmental Control Systems, jet engine fuel pumps, satellite thermal systems, propeller systems, and Electronic Engine Controls. Date Posted: Country: Location: Position Role Type: U.S. Citizen, U.S. Person, or Immigration Status Requirements: Security Clearance Type: Security Clearance Status: At RTX, the world largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the worlds most complex problems.
Electrical Software Shipboard Cybersecurity Engineer General Dynamics CorpElectrical Software Shipboard Cybersecurity EngineerGroton, CTControl System Security Engineers on our team typically perform the following types of work: Control system security analysis and design implementation, including the development of component specific requirements, working in close collaboration with component engineers. Design, implementation, operation and maintenance of sensitive unclassified and classified computing systems in accordance with appropriate Naval Reactors and Defense Counterintelligence Security Agency (DCSA) security policies.