UNKNOWN

FEED

and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing, vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.

Blue Origin Enterprises LP

Solar Technician (All Levels)

linkup_via_bold

With over 1,000 employees-in technical, consulting, operational, sales, finance, and corporate roles-we have stood the test of time by delivering on our Trust in Every Measure promise to our customers in vital industries, including life sciences, aerospace, defense, energy, and utilities. A wide variety of test and measurement instrumentation work experience is required, such as but not limited to Pressure, Temperature, Electrical/Electronic, Radio Frequency (RF), Microwave, Physical Dimensional and fiber Optic.

Transcat Inc

Repair Technician I

Operate coordinate measuring machines (CMMs) to assess product conformity and execute CMM inspection programs. Perform visual, mechanical, and dimensional inspections of components to verify compliance with engineering drawings, specifications, and controlled procedures.

HOUR

Indotronix International Corporation

Quality Control Technician

The position will support critical utility systems such as compressed air, pure water, and clean steam generation and distribution, assist with maintaining and troubleshooting production equipment, including vial washing, depyrogenation, vial filling and capping, sterilizers and parts washers, along with basic Metrology activities. We are seeking an Engineering Maintenance Technician II to join our Technical Services team supporting pharmaceutical utility systems and production equipment, and adhering to good manufacturing practice (GMP) regulations and best practices.

Lantheus Holdings, Inc.

Engineering Maintenance Technician II

ea_via_bold

Collaborate with production teams to quickly resolve inspection-related concerns, provide technical expertise, and support effective problem-solving efforts to maintain efficient and uninterrupted manufacturing operations. Facilitate root cause investigations and support failure analysis activities to uncover underlying issues, driving effective corrective and preventive actions that improve overall product quality.

Time-O-Matic Inc

Use of high precision mechanical and optical measurement devices to ensure the quality of machined/milled/turned and other manufactured parts from various sources, both within and from external vendors. Duties also include the calibration of hand tools, various gauges, and the mechanical measurement of calibration kit components.

Looking for a great job? Join eTeam. We’re looking for talented staffing professionals to join our staff. We also provide contract assignments and full-time jobs at Fortune 2000 Companies. We’ve been named one of the best companies to work for by Staffing Industry Analysts and New Jersey Business.

eTeam Inc.

Quality Technician - Career (Swing)

jobdiva

What you’ll be doing: Perform dimensional layout inspection of machined castings and components on Zeiss CMMs using Calypso, in accordance with published inspection plans, control plans and engineering drawings. Or preferred experience as described below: Hands-on experience operating Zeiss CMMs with Calypso software, including the ability to create, edit and prove out programs – not operate existing programs only.

CMM Inspector Technician (First Shift)

What we’re looking for: What you’ll be doing: Perform dimensional layout inspection of machined castings and components on Zeiss CMMs using Calypso, in accordance with published inspection plans, control plans and engineering drawings. Or preferred experience as described below: Hands-on experience operating Zeiss CMMs with Calypso software, including the ability to create, edit and prove out programs – not operate existing programs only.

CMM Inspector Technician (Second Shift)

Edgewater has a proven track record and is a trusted provider of fixed-price construction projects, engineering, and technical services for the Department of Energy (DOE), Department of Defense (DOD), National Nuclear Regulatory Commission (NRC), Canadian Commercial Nuclear Industry, and private sector commercial contractors involved in nuclear, high-hazard, or complex operations. The Quality Technician/CMM Programmer is responsible for performing dimensional inspections, operating and programming Coordinate Measuring Machines (CMMs), supporting first article inspections, validating manufacturing processes, and ensuring measurement systems provide accurate and reliable results.

Edgewater Technical Associates

Quality Technician/CMM Programmer (Calypso)

sourcestack_via_bold

Nice to have, training will be provided here, so please do not self-select out if you do not have experience in all of the following areas: Medical device quality systems (ISO 13485, 21 CFR Part 820 / QMSR) and design controls; FARO arm operation and CAM2 / PolyWorks; nonconformance and CAPA records; calibration program administration; and handling and packaging requirements for surgical instruments. We welcome inspection, metrology, calibration and precision machining professionals from any tolerance-critical industry - aerospace and defense, automotive, semiconductor, energy and nuclear, robotics and automation, contract machining, accredited calibration labs, or military PMEL / TMDE programs.

Do you find pride and purpose in helping millions of people around the world renew their lives? If so, career opportunities at Zimmer facilities worldwide will be an excellent fit for you. We're looking for remarkable people who can be catalysts for change, collaborate globally and push the boundaries of innovation so that we can continue to make the world a more mobile place.
We've found that when you're working to improve others' lives, you start to feel incredibly proud and excited about what you do. Join us and find your fit in a company with passion.

Zimmer Biomet Holdings Inc

Quality Assurance Technician Sr

Active National Pharmacy Technician Certification through the Pharmacy Technician Certification Board (PTCB) or National Healthcareer Association (ExCPT), along with an active State Pharmacy Technician License or Registration in good standing. Employees must be able to successfully complete required medical clearance for use of an Occupational Safety and Health Administration (OSHA)-compliant N95 respirator and work safely around chemicals and cleaning agents commonly used in laboratory environments.

Strive Pharmacy

Sterile Compounding Pharmacy Technician (Weekday, Overnight)

GreenHouseAPI

VVater is a US-based, next-generation water treatment company that aims to provide Water for Humankind with a cornerstone of sustainability and a promise of a better, healthier tomorrow, servicing various industries and markets around the world from Real Estate, Wastewater Treatment, Municipal Potable Water, and multiple others, in particular, focusing on the recovering and recycling of different waters in a centralized or decentralized way. This role supports R&D, engineering, product development, and production by turning designs into working automated systems, ranging from deployable mechanical structures to motion-controlled assemblies used in VVater's next-generation water treatment technologies.

VVater

Mechatronics Technician

Calibration Engineer III

HATCI is seeking a highly motivated and technically accomplished Emissions and OBD Engine Calibration Quality Manager to lead a team of 4 to 8 engineers responsible for identifying, investigating, and resolving engine calibration-related vehicle issues discovered in customer vehicles, assembly plant operations, and regulated in-use compliance programs. The team will leverage data and insights from engineering development programs, durability testing, warranty trends, assembly plant investigations, connected vehicle data, and off-nominal vehicle evaluations conducted during summer, winter, altitude, and other environmental test programs.

Hyundai America Technical Center, Inc.

Emissions and OBD Engine Calibration Quality Manager

Blue Origin

The Lab Technician supports the Engineering Department in conducting material, performance, and durability testing of windshield wiper systems and components for commercial vehicle applications (heavy-duty trucks, buses, and fleet vehicles). Set up, operate, and monitor test equipment for wiper blade, arm, motor, and linkage assemblies including endurance, wipe quality, freeze-thaw, pressure, and temperature cycling tests.

Who We Are and What We Do Headquartered in New Albany, Ohio, Commercial Vehicle Group, Inc. (CVG) has a history that dates back to 2000 when the leadership team identified the need for a unified company that could more fully support the increasing demands and provide custom solutions to original equipment manufacturers. They envisioned an integrated company that could offer comprehensive product lines, reputable brand names and leading edge technology in diverse markets and locations. Due to the company’s success, a string of strategic acquisition and an increased global presence, CVG made the decision to go public on August 4, 2004 and are publicly traded on the NASDAQ with a stock symbol of CVGI. Since that time, CVG has evolved into a recognized world leader in the development, manufacturing and fulfillment of fully integrated system solutions for the commercial vehicle market including the heavy truck, construction, military, agriculture and specialty industries. Our extensive product line is aimed at providing our customers solutions that help them succeed and includes suspension seat systems, interior trim systems such as instrument and door panels, headliners, cabinets, molded products and flooring, cab systems and components and electrical systems, including mirrors, wiper systems, electronic wiring harness assemblies and controls and switches. Our products are internationally recognized with product brands such as National Seating, KAB Seating, Sprague Devices, Moto Mirror, Prutsman, Roadwatch, Roadscan and Comfortek. CVG is made up of hard-working, dedicated employees that are focused on delivering results for our customers as well as shareholders. We pride ourselves in being driven by our customer service, product innovation and a diverse culture focused on continuous improvement in all areas of our company using our Total Quality Production System (TQPS). We are well on our way to becoming a world class organization, and won’t stop even when we achieve that status.

Commercial Vehicle Group, Inc.

Lab Technician Engineering Department

Measure hard points and 3D laser scan data for individual components and complete vehicles using a Coordinate Measuring Machine (CMM) arm. The Dimensional Analyst Technician Senior will perform and maintain component dimensional analysis equipment and measurements.

HRU-Tech

Dimensional Analysis Technician (551226)

FULL_TIME

Facilitate actions required when Non-Conformances arise, both external and internal, including customer communications. Proficient in use of inspection equipment including weld gages, calipers, micrometers, height stands, and protractors.

Standard Iron

Quality Technician II

partner JazzHR

To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. As a Test Technician at Impulse Space, you will own all aspects of test equipment implementation and operation while working closely with a fast paced, agile team.

Impulse Space

Test Technician

PinpointHQ

OR an Associate degree plus 2+ years of related laboratory experience (obtained through academic research, coursework, internships, or industry experience) in laboratory maintenance, analytical testing, and chemical handling or relevant experience. Chemical Analysis & Metrology: Prepare, mix, and analyze chemical samples using laboratory techniques such as titration, ICP-OES, HPLC/IC, CVS, and other advanced chemical testing methods.

Calibration Technician Jobs in the United States

Solar Technician (All Levels) Blue Origin Enterprises LP

Repair Technician I Transcat Inc

Quality Control Technician Indotronix International Corporation

Engineering Maintenance Technician II Lantheus Holdings, Inc.

Quality Control Technician Time-O-Matic Inc

Quality Technician - Career (Swing) eTeam Inc.

CMM Inspector Technician (First Shift) eTeam Inc.

CMM Inspector Technician (Second Shift) eTeam Inc.

Quality Technician/CMM Programmer (Calypso) Edgewater Technical Associates

Quality Assurance Technician Sr Zimmer Biomet Holdings Inc

Sterile Compounding Pharmacy Technician (Weekday, Overnight) Strive Pharmacy

Mechatronics Technician VVater

Calibration Engineer III Blue Origin Enterprises LP

Emissions and OBD Engine Calibration Quality Manager Hyundai America Technical Center, Inc.

Calibration Engineer III Blue Origin

Lab Technician Engineering Department Commercial Vehicle Group, Inc.

Dimensional Analysis Technician (551226) HRU-Tech

Quality Technician II Standard Iron

Test Technician Impulse Space

Analytical Chemistry Lab Technician Intel

Similar Job Searches

See More Jobs

Stand out to leading employers.