Sr. Calibration Technician (Metrology) KBR IncSr. Calibration Technician (Metrology)Phoenix, AZPerforms complex maintenance and repair work on equipment; inspects defective electronic equipment to determine malfunction; reads and interprets schematic diagrams, logic charts, drawings and sketches and manufacturers manuals; uses computer diagnostics to isolate area of malfunction; interfaces digital equipment with the computer and programs equipment and diagnostics functions. Provides advanced technical/electronic and instrumentation equipment repair work, troubleshooting, modifying, testing, calibrating, adjusting, repairing, and installing electronic, digital, and analog equipment and monitoring devices.
Calibration Technician C SIMCO ElectronicsCalibration Technician CScottsdale, AZThe Calibration Technician C will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement accuracy. Calibrate inspection, measurement, and test equipment (IM&TE) in one or more of the following disciplines - Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency, in order to ensure compliance with published specifications.
Senior Calibration Technician (Phoenix) Kinetic AutomationSenior Calibration Technician (Phoenix)Phoenix, AZResponsibilities: • Operations management: Oversee the teams daily work, quality, and output by designing and tailoring workflows, meeting prescribed schedules, and constantly improving cycle time. • Collaboration: Work with Kinetic team members and clients to understand requirements, address concerns, deliver solutions, help improve Kinetics AI and robotics technologies, and ensure high customer satisfaction.
Calibration Technician Amphenol AerospaceCalibration TechnicianMesa, ArizonaWith manufacturing sites in Sidney, NY, Mesa, AZ, Nogales, MX, and a Design Center in Pasadena, CA, Amphenol Aerospace Operations has been a leader in designing and manufacturing electrical components for the aviation and commercial airplane industry for over 100 years. Focusing on serving the needs of advanced and challenging market segments, we pride ourselves on our consistent ability to innovate and provide the markets with new creative solutions.
Calibration Technician A SIMCO ElectronicsCalibration Technician APhoenix, AZThe Calibration Technician A will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, Electrical -- DC/Low Frequency, Electrical, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement accuracy. Calibrate inspection, measurement, and test equipment (IM&TE) in one or more of the following disciplines - Acoustical, Chemical, Dimensional, Electrical -- DC/Low Frequency, Electrical -- RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, Time & Frequency, to ensure compliance with published specifications.
ADAS Calibration Technician (Phoenix) Kinetic AutomationADAS Calibration Technician (Phoenix)Phoenix, AZFacility upkeep: Assist with day-to-day tasks, including equipment upkeep, inventory management, moving or rearranging equipment, and maintaining a clean and organized workspace. Kinetic uses proprietary AI and autonomous robotics technology to automate vehicle maintenance and simplify repair administration for body shops, car dealerships, and insurance carriers.
Calibration/Metrology Technician (PMEL, TMDE, CCT) Field Calibrations, Inc.Calibration/Metrology Technician (PMEL, TMDE, CCT)Phoenix, AZJoin our dynamic team as a Metrology Calibration Technician, where you will focus primarily on performing on-site calibrations across the Phoenix Metropolitan area with our mobile calibration team. Field Calibrations, Inc. is a leader in test, precision measurement and diagnostic equipment calibration services, known for our commitment to accuracy, reliability, and innovation.
Calibration Technician - Scottsdale National CalibrationCalibration Technician - ScottsdaleScottsdale, AZNational Calibration Inc. was established in 1955, and is a growing full service ISO 17025 Accredited Calibration Laboratory with multiple offices located throughout the Southwestern United States. Our accredited laboratory provides calibration and repair of test and measurement equipment to include: Electronics, Force, Linear, Torque, Pressure, and Weight.
NewExperienced Calibration Technician -Scottsdale Flexible-Variable Hours National CalibrationExperienced Calibration Technician -Scottsdale Flexible-Variable HoursScottsdale, AZNational Calibration Inc. was established in 1955 and is a growing full-service ISO 17025 Accredited Calibration Laboratory with multiple offices located throughout the Southwestern United States. Our accredited laboratory provides calibration and repair of test and measurement equipment to include: Electronics, Force, Linear, Torque, Pressure, and Weight.
Calibration Technician Fortive CorporationCalibration TechnicianPhoenix, AZ$22.88–$34.32 / hourWe're a force for progress, working alongside our customers and partners to solve challenges on a global scale, from workplace safety in the most demanding conditions to advanced technologies that help providers focus on exceptional patient care. Fluke is looking for a dedicated Primary Pressure Calibration Technician based in Phoenix, AZ, to contribute to our calibration labs and operational areas.
NewMetrology Technician Calibration & Tool Support (On-Site) TSMC - Taiwan Semiconductor Manufacturing Company LimitedMetrology Technician Calibration & Tool Support (On-Site)Phoenix, AZA technology company in Arizona is seeking a Calibration Technician to manage offline tool recalls, maintain calibration records, and assist engineers. Candidates must possess a high school diploma and preferably an associate's degree.
Calibration Technician -Scottsdale Flexible-Variable Hours National CalibrationCalibration Technician -Scottsdale Flexible-Variable HoursScottsdale, AZNational Calibration Inc. was established in 1955 and is a growing full-service ISO 17025 Accredited Calibration Laboratory with multiple offices located throughout the Southwestern United States. Our accredited laboratory provides calibration and repair of test and measurement equipment to include: Electronics, Force, Linear, Torque, Pressure, and Weight.
Senior Technician Support, Calibration Comtech Telecommunications CorpSenior Technician Support, CalibrationChandler, AZThis role ensures compliance with internal quality procedures, maintains equipment readiness, and supports both internal laboratories and external calibration vendors to keep equipment in tolerance and available for production, engineering, and test operations. is a leading global technology company providing terrestrial and wireless network solutions, next-generation 9-1-1 emergency services, satellite and space communications technologies, and cloud native capabilities to commercial and government customers around the world.
Sr. Metrology Technician KBR IncSr. Metrology TechnicianPhoenix, AZOur support includes services such as complete management of embedded metrology systems, calibration and repair, test & inspection, metrology engineering, preventive maintenance, NADCAP special process support, and AMS2750 Heat Treat pyrometry services and more. Working knowledge of one or more of the following voltages, current, resistance, capacitance, time and frequency, signal conditioning, blueprint and drawings, dimensional tooling and hand tools, pressure controllers, pressure dead weight testers, force gages and load cells, etc.
NewMetrology Technician II -Tempe Day shift KBR IncMetrology Technician II -Tempe Day shiftTempe, AZKBR Metrology supports Honeywell Aerospace, Otto Instruments, Garrett Advance Motion, and their suppliers with services including onsite/offsite laboratory visits, test equipment calibration and repair, AMS2750 pyrometry services, metrology engineering, and equipment inspection. Working knowledge of one or more of the following voltage, current, resistance, capacitance, time and frequency, signal conditioning, blueprint and drawings, dimensional tooling and hand tools, pressure controllers, pressure dead weight testers, force gages and load cells, etc.
Metrology Technician Koch IncMetrology TechnicianPhoenix, AZMetrology Technician - Phoenix, Arizona, United States - 187420 - Koch. Koch Disruptive Technologies.
Chemical Technician (USA) Axelon Services CorporationChemical Technician (USA)Phoenix, AZ$39.50 / hourRole Summary Metrology Quality Engineer will report to the Operations Quality Manager and will be responsible for the end-to-end quality control of manufacturing processes (IQC, IPQC, OQC), with a strong technical focus on analytical instrumentation (GC, GCMS moisture and oxygen analyzer) and TVOC monitoring. Tool Deployment: Drive the deployment of QC methods and quality tools on-site, including FMEA (Failure Mode and Effects Analysis), RCA (Root Cause Analysis), SPC (Statistical Process Control), Plan-do-Check-Act (PDCA) methodology and Control Charts to enhance process stability.
NewQuality Technician - 3rd Shift Altium Packaging LPQuality Technician - 3rd ShiftPhoenix, AZWe incorporate our Guiding Principles into all aspects and at all levels of the organization and use them as a framework for decision-making. Communicate quality issues and out of specifications conditions to appropriate personnel and with shift leaders.
NewSurvey Technician Bechtel CorporationSurvey TechnicianChandler, AZExtraordinary teams building inspiring projects: Since 1898, we have helped customers complete more than 25,000 projects in 160 countries on all seven continents that have created jobs, grown economies, improved the resiliency of the world's infrastructure, increased access to energy, resources, and vital services,and made the world a safer, cleaner place. As part of this work, the M&T team is responsible for delivering the engineering, procurement, and construction scope required to complete and finish-out a leading-edge chipmaking facility - a highly demanding environment where precision, cleanliness, schedule certainty, and coordination across thousands of craft and professional personnel are essential to success.
New Grad Mechanical Technician Manpower EngineeringNew Grad Mechanical TechnicianPhoenix, AZ$50,000–$60,000 / yearFull time0–2 years of experience in mechanical installation, maintenance, or field service (new grads are invited to apply - high school or Associate's degrees with mechanical and hand tool aptitude - even just working on cars or in a shop at home - and a love of manufacturing) . ManpowerGroup® (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win.
Manufacturing Technician 2 DP ProfessionalsManufacturing Technician 2Mesa, AZPosition description: The Manufacturing Technician 2 will perform functions associated with all manufacturing operations, including working with engineers in setup and calibration tasks, and conducting rework and quality testing. Maintaining cleanliness of work areas, participating in team activities to enhance safety, quality, cost, and scheduling, and following established procedures.
Principal Product and Process Quality Technician ZFPrincipal Product and Process Quality TechnicianMesa, AZZF LIFETEC in Mesa, AZ is seeking an experienced and detail-oriented Principal Quality Technicianto support daily Quality functions related to Receiving Inspection, Calibration, Metrology, and Measurement Systems. This role serves as a technical lead within the Quality Systems team, providing expertise in CMM programming, measurement strategies, inspection planning, calibration systems, and continuous improvement initiatives.
Mechanical Technician I Karwell TechnologiesMechanical Technician IChandler, AZThis role requires hands-on technical skills, attention to detail, and strict adherence to safety and quality procedures to ensure maximum equipment reliability and operational efficiency. The Mechanical Technician I is responsible for performing equipment assembly, preventive maintenance, troubleshooting, and repair activities within a manufacturing environment.
Load bank Technician Data Centers PkazaLoad bank Technician Data CentersPhoenix, AZPrevious experience in the Military / Military veterans in all branches that have experience with Electrical / Mechanical is a huge plus (Navy Nukes- EMN, ETN, MMNs, Seabees, Army - Power Generation, Air Force – Power Production, Generator Techs, Maritime, Coast Guard, etc.). Our client is a fast growing company supporting mission critical test equipment rental for electrical load bank applications as well as liquid-cooled load banks space to support new AI data projects for data center projects.
Instrumentation Controls Technician fairlifeInstrumentation Controls TechnicianGoodyear, ArizonaWith over $3B in annual retail sales, fairlife’s portfolio of delicious, lactose-free, real dairy products includes: fairlife® ultra-filtered milk ; Core Power® High Protein Shakes, a sports nutrition drink to support post-workout recovery; fairlife® nutrition plan , a nutrition shake to support the journey to better health. In this role, you will be responsible for the installation, calibration, maintenance, and troubleshooting of instrumentation and control systems that keep our production lines running safely, efficiently, and in full compliance with food safety regulations.
Journeyman Electrician (Controls Technician III) ModigentJourneyman Electrician (Controls Technician III)Phoenix, ArizonaWork Environment/Safety : Primarily field-based in commercial/industrial settings (indoor/outdoor, rooftops, mechanical rooms, varying weather); exposure to noise, dust, heights, electrical hazards, and extreme temperatures; must strictly adhere to OSHA regulations, conduct hazard identification, and wear required personal protective equipment (PPE) such as hard hats, safety glasses, gloves, harnesses, and steel-toed boots at all times—safety is our top priority and non-negotiable. Physical Demands : Ability to regularly lift and carry up to 50 lbs, climb ladders/scaffolding/stairs, work in confined spaces or at heights, bend/kneel/crouch, reach overhead, and use tools/equipment for extended periods; frequent standing, walking, manual dexterity, and physical stamina required.
Metrology Technician Taiwan Semiconductor Manufacturing Co LtdMetrology TechnicianPhoenix, AZ{''response'': , ''status'': True, ''status_code'': 200, ''content'': ''nnn n n n n n n n n n n n n n n nn n n n n n n n n n n n n n n n n n n n Metrology Techniciann n nnnn nnnnn nnn nnn n n n n Skip to content nn n n n n n n Careers n n nn n n n n nn n n n n n n n Search Jobsn n n n nn n n n n n Eventsn n n n nn n n n n n E...
NewSurvey Technician Bechtel Global CorporationSurvey TechnicianChandler, AZExtraordinary teams building inspiring projects: Since 1898, we have helped customers complete more than 25,000 projects in 160 countries on all seven continents that have created jobs, grown economies, improved the resiliency of the world's infrastructure, increased access to energy, resources, and vital services, and made the world a safer, cleaner place. As part of this work, the M&T team is responsible for delivering the engineering, procurement, and construction scope required to complete and finish-out a leading-edge chipmaking facility - a highly demanding environment where precision, cleanliness, schedule certainty, and coordination across thousands of craft and professional personnel are essential to success.
NewATE Field Technician Automotive Technology ExpertsATE Field TechnicianGilbert, ArizonaFull timeJOB PURPOSE: The ATE Field Technician is a mobile, field-based role responsible for delivering high-quality diagnostic, programming, and calibration services to Crash Champions locations. Our growth will continue as we add team members that strive to be the best, commit to taking care of our customers, and continue to train so that they can accomplish team goals and obtain career advancement opportunities.
Experienced P&C Field Services Technician WSP Global IncExperienced P&C Field Services TechnicianPhoenix, AZ$50–$70 / hourBachelor of Science in Electrical Engineering or Technology degree in a similar discipline Experience in testing and troubleshooting electromechanical relay Experience in testing and commissioning electrical equipment on high voltage substations such as CTs, CCVTs, PLC systems, and DC systems, including batteries and battery chargers Current OSHA 30-hour or 40-hour HAZWOPER certification. • Perform assigned testing and commissioning tasks for Protection and Control systems on high voltage substations • Perform on-site hands-on protective relay testing using relay test sets such as Omicron CMC 256/356 or Doble F6150.
Laboratory Technician I, II, III, IV Raba Kistner Consultants IncLaboratory Technician I, II, III, IVPhoenix, AZThe work environment for this position includes potential exposure to movement of heavy equipment on construction or roadway sites; potential exposure to hazardous dangerous chemicals and solvents, noise, dust, fumes, grease and oils, radiant and electrical energy, and vibration; all of which would require employee to implement and follow proper safety procedures and utilize appropriate protective equipment. Completion of Troxler Manufacturing or equal radiation safety course to utilize nuclear gauges, ACI Field Testing Technician Grade 1, and ACI Concrete Strength Testing, and ACI Aggregate Testing are all preferred.
Controls Technician Aspen Technical Staffing, IncControls TechnicianLitchfield Park, AZThe Controls Technician will perform installation, troubleshooting, calibration, testing, commissioning, and maintenance activities related to power monitoring systems, building control systems, and industrial automation equipment. We are seeking an experienced Controls Technician to support electrical controls and instrumentation work on a large-scale industrial/data center project in Litchfield Park, Arizona.
QA Laboratory Technician I Netpace, Inc.QA Laboratory Technician ITempe, AZEvaluate trends from test results and develop plans to correct deficiencies and communicate these plans to employees, and management. Must be able to demonstrate an ability and willingness to communicate effectively in order to maintain high levels of safety, quality, and efficiency.
Field Service Technician - HAZMAT - Traveling Position Clean HarborsField Service Technician - HAZMAT - Traveling PositionTolleson, Arizona$20–$23This role will be active in the field responsible for the performance of tasks associated with hazardous waste clean-up, site-remediation, equipment decontamination and handling of hazardous materials. Operate light and heavy equipment, handles various hand tools and powered industrial tools, works with vibration-producing tools.
Pharmacy Technician Tailstorm Health IncPharmacy TechnicianChandler, AZ$20–$25 / hourOperating from state-of-the-art, FDA-inspected facilities in Chandler and Deer Valley, Arizona, Medivant is committed to excellence, compliance, and innovation in every aspect of sterile manufacturing. Medivant Healthcare is a U.S.-based pharmaceutical manufacturer dedicated to producing high-quality, sterile injectable medications for hospitals, clinics, and healthcare facilities nationwide.
Lab Technician (1st Shift) Ultra Clean Holdings IncLab Technician (1st Shift)Phoenix, AZThe Lab Technician supports laboratory operations by performing chemical sampling, maintaining equipment and supplies, and executing experiments and analytical tasks. The technician works independently and collaboratively to uphold cleanroom protocols, manage sample logistics, and contribute to continuous process improvement.
BAS Controls Systems Service Technician IV-V MPSWBAS Controls Systems Service Technician IV-VPhoenix, ArizonaWe are seeking an experienced Controls Service Technician to work as part of a team responsible for providing advanced building automation system (BAS) services to contracted preventative maintenance customers. This position requires the ability to work through high-level, multifaceted issues, and clearly communicate the issues, statuses, and resolutions with customers, and other involved parties.
Biomedical Equipment Technician CommonSpirit HealthBiomedical Equipment TechnicianGilbert, AZAs our Biomedical Equipment Technician, you will help healthcare teams manage and utilize critical medical devices by executing a combination of routine preventative maintenance and timely equipment repairs so they can confidently leverage highly accurate diagnostic tools to deliver safe, effective patient care. At Mercy Gilbert Medical Center, a 198-bed non-profit facility, you'll be an integral part of providing exceptional, compassionate healthcare to the vibrant and growing communities in and around Gilbert, Arizona.
NewMechanical Technician I Katalyst Healthcares & Life SciencesMechanical Technician IChandler, AZThis role requires hands-on technical skills, attention to detail, and strict adherenceto safety and quality procedures to ensure maximum equipment reliability and operational efficiency. The Mechanical Technician I is responsible for performing equipment assembly, preventive maintenance, troubleshooting, and repair activities within a manufacturing environment.
NewSurvey Instrument Technician Aztec Engineering Group, Inc,Survey Instrument TechnicianPhoenix, AZTYPSA in the United States is a multi-discipline engineering and environmental consulting firm assisting public and private clients in planning, developing, designing, constructing, and maintaining critical infrastructure projects across the United States. Decisive & Action Oriented - Has a high level of energy and stamina; gets things done; makes sound educated but rapid decisions even when short of information; enjoys managing challenging projects and works well in fast-paced and pressure environments.
Survey Technician Bechtel CorpSurvey TechnicianChandler, AZExtraordinary teams building inspiring projects: Since 1898, we have helped customers complete more than 25,000 projects in 160 countries on all seven continents that have created jobs, grown economies, improved the resiliency of the world''s infrastructure, increased access to energy, resources, and vital services, and made the world a safer, cleaner place. Project Overview: Bechtel Manufacturing and Technology (M&T) is an exciting and growing business that serves the increasing demand of EPC services for customers in the semiconductor (manufacturing facilities and supply chain); data center, electric vehicle (batteries, charging infrastructure, and production); and life sciences markets.
NewLab Engineering Technician Intel CorpLab Engineering TechnicianChandler, AZ$63,090–$102,790 / yearIn this role, you will support engineering teams by preparing samples, executing experimental measurements, maintaining lab equipment, and helping develop new tools, fixtures, and test methods. Associate degree in a technical discipline with 2+ years of experience in the semiconductor technical workforce OR 5+ years of experience in the semiconductor technical workforce in lieu of the degree.
ATE Field Mechanical Technician Automotive Technology ExpertsATE Field Mechanical TechnicianMesa, ArizonaFull timeJOB PURPOSE: The ATE Field Mechanic Technician is a mobile, field-based role responsible for delivering high quality mechanical, diagnostic, programming, calibration, electrical, and safety related services to Crash Champions locations, third party partners, and retail customers. Perform diagnostics, scanning, programming, calibrations, electrical diagnostics, wire and connector repair, and light to moderate mechanical services.
Electro-Mechanical Repair Technician AMETEK, IncElectro-Mechanical Repair TechnicianChandler, AZFull timeFine Motor Skills: Executing precise, coordinated movements with the hands and fingers is essential for manipulating small components and tools. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.5 billion.
Facilities Technician Enpro IncFacilities TechnicianTempe, AZ$28–$33 / hourThis role performs preventive and corrective maintenance on facility systems and manufacturing equipment, completes routine inspections, maintains maintenance records, and supports day-to-day facility operations. The Facilities Technician is responsible for maintaining, troubleshooting, repairing, and supporting facility and production equipment to ensure safe, reliable, and efficient operations.
Test Technician Renesas Electronics CorpTest TechnicianTempe, AZThe technician will collect data, build fixtures and cabling, rework PCBs, debug test setups, calibrate testers, coordinate module sample logistics, execute customer sample testing, support module electrical debug, and maintain a clean and organized engineering workspace. Products include high-performance digital power VRMs, multiphase controllers, Smart Power Stages (SPS), Vertical Power Stages (SPS with integrated capacitors and multiple silicon die), Power Towers (power modules integrating multiple SPS-equivalents with capacitors and inductors), and power MOSFETs.
Quality Control Engineer / QC Technician Marketech International Corporation USAQuality Control Engineer / QC TechnicianPhoenix, AZPrepare, maintain, and organize QA/QC documentation, including daily inspection reports, inspection checklists, material certificates, calibration logs, test reports, turnover records, and quality-control logs. The QC Engineer will work closely with site engineers, Superintendents, subcontractors, third-party inspectors, consultants, client representatives, and project leadership to support inspection readiness and quality compliance throughout the project lifecycle.
Senior Field Service Technician CaltrolSenior Field Service TechnicianChandler, ArizonaNew installation, retrofit, and repair pressure, temperature, differential transmitters, and general process instrumentation pressure, and process control instrumentation at customers' facilities or in the Caltrol shop. Strong electrical knowledge, including the ability to read and understand wiring diagrams – single phase, three phase, AC, and DC, and the ability to troubleshoot electrical problems.
On-Site Fire Protection Technician - Mining The Hiller CompaniesOn-Site Fire Protection Technician - MiningPhoenix, AZKey Responsibilities: Install and service fire suppression systems on large mining equipment such as haul trucks, drills, loaders, shovels, as well as fixed fire systems in buildings, conveyors, etc. Work Location: This position is based out of the Denver, CO area and will include travel to other mining locations in CO, largely day trips with little if any overnight travel.
Commercial Food Service Technician Grand Canyon University Dining ServicesCommercial Food Service TechnicianPhoenix, AZInstall, service, repair, maintain, operate and adjust all types of industrial, commercial mechanical refrigeration, ventilation, and ventilating equipment, food service equipment and air dryers. Responsibilities: Install, service, repair, maintain refrigeration and kitchen cooking equipment and any other equipment including calibration of related instruments, gauges and controls.