Slope Stability Technician Staff ExpertsSlope Stability TechnicianPhoenix, AZ$24–$32We specialize in staffing in the areas of Engineering, Construction Management, Manufacturing, Information Technology, Aerospace & Defense, Administrative-Accounting-Finance, Call Center Operations, Life Sciences, Healthcare, Skilled Trades and Logistics. Assists with routine Engineering projects, including layout and design, specification development and preparation, new product evaluation, and data collection to support Operations or the Engineering unit at assigned site.
Sr. Calibration Technician (Metrology) KBR IncSr. Calibration Technician (Metrology)Phoenix, AZPerforms complex maintenance and repair work on equipment; inspects defective electronic equipment to determine malfunction; reads and interprets schematic diagrams, logic charts, drawings and sketches and manufacturers manuals; uses computer diagnostics to isolate area of malfunction; interfaces digital equipment with the computer and programs equipment and diagnostics functions. Provides advanced technical/electronic and instrumentation equipment repair work, troubleshooting, modifying, testing, calibrating, adjusting, repairing, and installing electronic, digital, and analog equipment and monitoring devices.
Calibration Technician C SIMCO ElectronicsCalibration Technician CScottsdale, AZThe Calibration Technician C will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement accuracy. Calibrate inspection, measurement, and test equipment (IM&TE) in one or more of the following disciplines - Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency, in order to ensure compliance with published specifications.
Senior Calibration Technician (Phoenix) Kinetic AutomationSenior Calibration Technician (Phoenix)Phoenix, AZResponsibilities: • Operations management: Oversee the teams daily work, quality, and output by designing and tailoring workflows, meeting prescribed schedules, and constantly improving cycle time. • Collaboration: Work with Kinetic team members and clients to understand requirements, address concerns, deliver solutions, help improve Kinetics AI and robotics technologies, and ensure high customer satisfaction.
Calibration Technician A SIMCO ElectronicsCalibration Technician APhoenix, AZThe Calibration Technician A will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, Electrical -- DC/Low Frequency, Electrical, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement accuracy. Calibrate inspection, measurement, and test equipment (IM&TE) in one or more of the following disciplines - Acoustical, Chemical, Dimensional, Electrical -- DC/Low Frequency, Electrical -- RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, Time & Frequency, to ensure compliance with published specifications.
Calibration Technician Amphenol AerospaceCalibration TechnicianMesa, ArizonaWith manufacturing sites in Sidney, NY, Mesa, AZ, Nogales, MX, and a Design Center in Pasadena, CA, Amphenol Aerospace Operations has been a leader in designing and manufacturing electrical components for the aviation and commercial airplane industry for over 100 years. Focusing on serving the needs of advanced and challenging market segments, we pride ourselves on our consistent ability to innovate and provide the markets with new creative solutions.
Calibration/Metrology Technician (PMEL, TMDE, CCT) Field Calibrations, Inc.Calibration/Metrology Technician (PMEL, TMDE, CCT)Phoenix, AZJoin our dynamic team as a Metrology Calibration Technician, where you will focus primarily on performing on-site calibrations across the Phoenix Metropolitan area with our mobile calibration team. Field Calibrations, Inc. is a leader in test, precision measurement and diagnostic equipment calibration services, known for our commitment to accuracy, reliability, and innovation.
Calibration Technician - Scottsdale National CalibrationCalibration Technician - ScottsdaleScottsdale, AZNational Calibration Inc. was established in 1955, and is a growing full service ISO 17025 Accredited Calibration Laboratory with multiple offices located throughout the Southwestern United States. Our accredited laboratory provides calibration and repair of test and measurement equipment to include: Electronics, Force, Linear, Torque, Pressure, and Weight.
NewExperienced Calibration Technician -Scottsdale Flexible-Variable Hours National CalibrationExperienced Calibration Technician -Scottsdale Flexible-Variable HoursScottsdale, AZNational Calibration Inc. was established in 1955 and is a growing full-service ISO 17025 Accredited Calibration Laboratory with multiple offices located throughout the Southwestern United States. Our accredited laboratory provides calibration and repair of test and measurement equipment to include: Electronics, Force, Linear, Torque, Pressure, and Weight.
ADAS Calibration Technician (Phoenix) Kinetic AutomationADAS Calibration Technician (Phoenix)Phoenix, AZFacility upkeep: Assist with day-to-day tasks, including equipment upkeep, inventory management, moving or rearranging equipment, and maintaining a clean and organized workspace. Kinetic uses proprietary AI and autonomous robotics technology to automate vehicle maintenance and simplify repair administration for body shops, car dealerships, and insurance carriers.
Calibration Technician Fortive CorporationCalibration TechnicianPhoenix, AZ$22.88–$34.32 / hourWe're a force for progress, working alongside our customers and partners to solve challenges on a global scale, from workplace safety in the most demanding conditions to advanced technologies that help providers focus on exceptional patient care. Fluke is looking for a dedicated Primary Pressure Calibration Technician based in Phoenix, AZ, to contribute to our calibration labs and operational areas.
NewMetrology Technician Calibration & Tool Support (On-Site) TSMC - Taiwan Semiconductor Manufacturing Company LimitedMetrology Technician Calibration & Tool Support (On-Site)Phoenix, AZA technology company in Arizona is seeking a Calibration Technician to manage offline tool recalls, maintain calibration records, and assist engineers. Candidates must possess a high school diploma and preferably an associate's degree.
Calibration Technician -Scottsdale Flexible-Variable Hours National CalibrationCalibration Technician -Scottsdale Flexible-Variable HoursScottsdale, AZNational Calibration Inc. was established in 1955 and is a growing full-service ISO 17025 Accredited Calibration Laboratory with multiple offices located throughout the Southwestern United States. Our accredited laboratory provides calibration and repair of test and measurement equipment to include: Electronics, Force, Linear, Torque, Pressure, and Weight.
Senior Technician Support, Calibration ComtechSenior Technician Support, CalibrationChandler, AZThis role ensures compliance with internal quality procedures, maintains equipment readiness, and supports both internal laboratories and external calibration vendors to keep equipment in tolerance and available for production, engineering, and test operations. is a leading global technology company providing terrestrial and wireless network solutions, next-generation 9-1-1 emergency services, satellite and space communications technologies, and cloud native capabilities to commercial and government customers around the world.
Senior Technician Support, Calibration Comtech Telecommunications CorpSenior Technician Support, CalibrationChandler, AZThis role ensures compliance with internal quality procedures, maintains equipment readiness, and supports both internal laboratories and external calibration vendors to keep equipment in tolerance and available for production, engineering, and test operations. is a leading global technology company providing terrestrial and wireless network solutions, next-generation 9-1-1 emergency services, satellite and space communications technologies, and cloud native capabilities to commercial and government customers around the world.
Sr. Metrology Technician KBR IncSr. Metrology TechnicianPhoenix, AZOur support includes services such as complete management of embedded metrology systems, calibration and repair, test & inspection, metrology engineering, preventive maintenance, NADCAP special process support, and AMS2750 Heat Treat pyrometry services and more. Working knowledge of one or more of the following voltages, current, resistance, capacitance, time and frequency, signal conditioning, blueprint and drawings, dimensional tooling and hand tools, pressure controllers, pressure dead weight testers, force gages and load cells, etc.
NewMetrology Technician II -Tempe Day shift KBR IncMetrology Technician II -Tempe Day shiftTempe, AZKBR Metrology supports Honeywell Aerospace, Otto Instruments, Garrett Advance Motion, and their suppliers with services including onsite/offsite laboratory visits, test equipment calibration and repair, AMS2750 pyrometry services, metrology engineering, and equipment inspection. Working knowledge of one or more of the following voltage, current, resistance, capacitance, time and frequency, signal conditioning, blueprint and drawings, dimensional tooling and hand tools, pressure controllers, pressure dead weight testers, force gages and load cells, etc.
Metrology Technician Koch IncMetrology TechnicianPhoenix, AZMetrology Technician - Phoenix, Arizona, United States - 187420 - Koch. Koch Disruptive Technologies.
Chemical Technician (USA) Axelon Services CorporationChemical Technician (USA)Phoenix, AZ$39.50 / hourRole Summary Metrology Quality Engineer will report to the Operations Quality Manager and will be responsible for the end-to-end quality control of manufacturing processes (IQC, IPQC, OQC), with a strong technical focus on analytical instrumentation (GC, GCMS moisture and oxygen analyzer) and TVOC monitoring. Tool Deployment: Drive the deployment of QC methods and quality tools on-site, including FMEA (Failure Mode and Effects Analysis), RCA (Root Cause Analysis), SPC (Statistical Process Control), Plan-do-Check-Act (PDCA) methodology and Control Charts to enhance process stability.
NewQuality Technician - 3rd Shift Altium Packaging LPQuality Technician - 3rd ShiftPhoenix, AZWe incorporate our Guiding Principles into all aspects and at all levels of the organization and use them as a framework for decision-making. Communicate quality issues and out of specifications conditions to appropriate personnel and with shift leaders.
New Grad Mechanical Technician Manpower EngineeringNew Grad Mechanical TechnicianPhoenix, AZ$50,000–$60,000 / yearFull time0–2 years of experience in mechanical installation, maintenance, or field service (new grads are invited to apply - high school or Associate's degrees with mechanical and hand tool aptitude - even just working on cars or in a shop at home - and a love of manufacturing) . ManpowerGroup® (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win.
Manufacturing Technician 2 DP ProfessionalsManufacturing Technician 2Mesa, AZPosition description: The Manufacturing Technician 2 will perform functions associated with all manufacturing operations, including working with engineers in setup and calibration tasks, and conducting rework and quality testing. Maintaining cleanliness of work areas, participating in team activities to enhance safety, quality, cost, and scheduling, and following established procedures.
Load bank Technician Data Centers PkazaLoad bank Technician Data CentersPhoenix, AZPrevious experience in the Military / Military veterans in all branches that have experience with Electrical / Mechanical is a huge plus (Navy Nukes- EMN, ETN, MMNs, Seabees, Army - Power Generation, Air Force – Power Production, Generator Techs, Maritime, Coast Guard, etc.). Our client is a fast growing company supporting mission critical test equipment rental for electrical load bank applications as well as liquid-cooled load banks space to support new AI data projects for data center projects.
NewSurvey Technician Bechtel CorporationSurvey TechnicianChandler, AZExtraordinary teams building inspiring projects: Since 1898, we have helped customers complete more than 25,000 projects in 160 countries on all seven continents that have created jobs, grown economies, improved the resiliency of the world's infrastructure, increased access to energy, resources, and vital services,and made the world a safer, cleaner place. As part of this work, the M&T team is responsible for delivering the engineering, procurement, and construction scope required to complete and finish-out a leading-edge chipmaking facility - a highly demanding environment where precision, cleanliness, schedule certainty, and coordination across thousands of craft and professional personnel are essential to success.
Instrumentation Controls Technician fairlifeInstrumentation Controls TechnicianGoodyear, ArizonaWith over $3B in annual retail sales, fairlife’s portfolio of delicious, lactose-free, real dairy products includes: fairlife® ultra-filtered milk ; Core Power® High Protein Shakes, a sports nutrition drink to support post-workout recovery; fairlife® nutrition plan , a nutrition shake to support the journey to better health. In this role, you will be responsible for the installation, calibration, maintenance, and troubleshooting of instrumentation and control systems that keep our production lines running safely, efficiently, and in full compliance with food safety regulations.
Mechanical Technician I Karwell TechnologiesMechanical Technician IChandler, AZThis role requires hands-on technical skills, attention to detail, and strict adherence to safety and quality procedures to ensure maximum equipment reliability and operational efficiency. The Mechanical Technician I is responsible for performing equipment assembly, preventive maintenance, troubleshooting, and repair activities within a manufacturing environment.
Manufacturing Technician PGS WorldwideManufacturing TechnicianMesa, AZ$31.41 / hourThis role involves following detailed work instructions, using precision measuring equipment, supporting quality testing and rework, operating industrial equipment, and maintaining a safe, clean manufacturing environment. PGS Worldwide is seeking a Manufacturing Technician in Mesa, AZ for a 5-month contract role supporting a leading aerospace & defense company.
Journeyman Electrician (Controls Technician III) ModigentJourneyman Electrician (Controls Technician III)Phoenix, ArizonaWork Environment/Safety : Primarily field-based in commercial/industrial settings (indoor/outdoor, rooftops, mechanical rooms, varying weather); exposure to noise, dust, heights, electrical hazards, and extreme temperatures; must strictly adhere to OSHA regulations, conduct hazard identification, and wear required personal protective equipment (PPE) such as hard hats, safety glasses, gloves, harnesses, and steel-toed boots at all times—safety is our top priority and non-negotiable. Physical Demands : Ability to regularly lift and carry up to 50 lbs, climb ladders/scaffolding/stairs, work in confined spaces or at heights, bend/kneel/crouch, reach overhead, and use tools/equipment for extended periods; frequent standing, walking, manual dexterity, and physical stamina required.
Principal Product and Process Quality Technician ZFPrincipal Product and Process Quality TechnicianMesa, AZZF LIFETEC in Mesa, AZ is seeking an experienced and detail-oriented Principal Quality Technicianto support daily Quality functions related to Receiving Inspection, Calibration, Metrology, and Measurement Systems. This role serves as a technical lead within the Quality Systems team, providing expertise in CMM programming, measurement strategies, inspection planning, calibration systems, and continuous improvement initiatives.
Experienced P&C Field Services Technician WSP Global IncExperienced P&C Field Services TechnicianPhoenix, AZ$50–$70 / hourBachelor of Science in Electrical Engineering or Technology degree in a similar discipline Experience in testing and troubleshooting electromechanical relay Experience in testing and commissioning electrical equipment on high voltage substations such as CTs, CCVTs, PLC systems, and DC systems, including batteries and battery chargers Current OSHA 30-hour or 40-hour HAZWOPER certification. • Perform assigned testing and commissioning tasks for Protection and Control systems on high voltage substations • Perform on-site hands-on protective relay testing using relay test sets such as Omicron CMC 256/356 or Doble F6150.
Laboratory Technician I, II, III, IV Raba Kistner Consultants IncLaboratory Technician I, II, III, IVPhoenix, AZThe work environment for this position includes potential exposure to movement of heavy equipment on construction or roadway sites; potential exposure to hazardous dangerous chemicals and solvents, noise, dust, fumes, grease and oils, radiant and electrical energy, and vibration; all of which would require employee to implement and follow proper safety procedures and utilize appropriate protective equipment. Completion of Troxler Manufacturing or equal radiation safety course to utilize nuclear gauges, ACI Field Testing Technician Grade 1, and ACI Concrete Strength Testing, and ACI Aggregate Testing are all preferred.
NewSurvey Technician Bechtel Global CorporationSurvey TechnicianChandler, AZExtraordinary teams building inspiring projects: Since 1898, we have helped customers complete more than 25,000 projects in 160 countries on all seven continents that have created jobs, grown economies, improved the resiliency of the world's infrastructure, increased access to energy, resources, and vital services, and made the world a safer, cleaner place. As part of this work, the M&T team is responsible for delivering the engineering, procurement, and construction scope required to complete and finish-out a leading-edge chipmaking facility - a highly demanding environment where precision, cleanliness, schedule certainty, and coordination across thousands of craft and professional personnel are essential to success.
NewATE Field Technician Automotive Technology ExpertsATE Field TechnicianGilbert, ArizonaFull timeJOB PURPOSE: The ATE Field Technician is a mobile, field-based role responsible for delivering high-quality diagnostic, programming, and calibration services to Crash Champions locations. Our growth will continue as we add team members that strive to be the best, commit to taking care of our customers, and continue to train so that they can accomplish team goals and obtain career advancement opportunities.
Metrology Technician Taiwan Semiconductor Manufacturing Co LtdMetrology TechnicianPhoenix, AZ{''response'': , ''status'': True, ''status_code'': 200, ''content'': ''nnn n n n n n n n n n n n n n n nn n n n n n n n n n n n n n n n n n n n Metrology Techniciann n nnnn nnnnn nnn nnn n n n n Skip to content nn n n n n n n Careers n n nn n n n n nn n n n n n n n Search Jobsn n n n nn n n n n n Eventsn n n n nn n n n n n E...
QA Laboratory Technician I Netpace, Inc.QA Laboratory Technician ITempe, AZEvaluate trends from test results and develop plans to correct deficiencies and communicate these plans to employees, and management. Must be able to demonstrate an ability and willingness to communicate effectively in order to maintain high levels of safety, quality, and efficiency.
Field Service Technician - HAZMAT - Traveling Position Clean HarborsField Service Technician - HAZMAT - Traveling PositionTolleson, Arizona$20–$23This role will be active in the field responsible for the performance of tasks associated with hazardous waste clean-up, site-remediation, equipment decontamination and handling of hazardous materials. Operate light and heavy equipment, handles various hand tools and powered industrial tools, works with vibration-producing tools.
Biomedical Equipment Technician CommonSpirit HealthBiomedical Equipment TechnicianGilbert, AZAs our Biomedical Equipment Technician, you will help healthcare teams manage and utilize critical medical devices by executing a combination of routine preventative maintenance and timely equipment repairs so they can confidently leverage highly accurate diagnostic tools to deliver safe, effective patient care. At Mercy Gilbert Medical Center, a 198-bed non-profit facility, you'll be an integral part of providing exceptional, compassionate healthcare to the vibrant and growing communities in and around Gilbert, Arizona.
Lab Technician (1st Shift) Ultra Clean Holdings IncLab Technician (1st Shift)Phoenix, AZThe Lab Technician supports laboratory operations by performing chemical sampling, maintaining equipment and supplies, and executing experiments and analytical tasks. The technician works independently and collaboratively to uphold cleanroom protocols, manage sample logistics, and contribute to continuous process improvement.
BAS Controls Systems Service Technician IV-V MPSWBAS Controls Systems Service Technician IV-VPhoenix, ArizonaWe are seeking an experienced Controls Service Technician to work as part of a team responsible for providing advanced building automation system (BAS) services to contracted preventative maintenance customers. This position requires the ability to work through high-level, multifaceted issues, and clearly communicate the issues, statuses, and resolutions with customers, and other involved parties.
NewSurvey Instrument Technician Aztec Engineering Group, Inc,Survey Instrument TechnicianPhoenix, AZTYPSA in the United States is a multi-discipline engineering and environmental consulting firm assisting public and private clients in planning, developing, designing, constructing, and maintaining critical infrastructure projects across the United States. Decisive & Action Oriented - Has a high level of energy and stamina; gets things done; makes sound educated but rapid decisions even when short of information; enjoys managing challenging projects and works well in fast-paced and pressure environments.
NewMechanical Technician I Katalyst Healthcares & Life SciencesMechanical Technician IChandler, AZThis role requires hands-on technical skills, attention to detail, and strict adherenceto safety and quality procedures to ensure maximum equipment reliability and operational efficiency. The Mechanical Technician I is responsible for performing equipment assembly, preventive maintenance, troubleshooting, and repair activities within a manufacturing environment.
Pharmacy Technician Tailstorm Health IncPharmacy TechnicianChandler, AZ$20–$25 / hourOperating from state-of-the-art, FDA-inspected facilities in Chandler and Deer Valley, Arizona, Medivant is committed to excellence, compliance, and innovation in every aspect of sterile manufacturing. Medivant Healthcare is a U.S.-based pharmaceutical manufacturer dedicated to producing high-quality, sterile injectable medications for hospitals, clinics, and healthcare facilities nationwide.
On-Site Fire Protection Technician - Mining The Hiller CompaniesOn-Site Fire Protection Technician - MiningPhoenix, AZKey Responsibilities: Install and service fire suppression systems on large mining equipment such as haul trucks, drills, loaders, shovels, as well as fixed fire systems in buildings, conveyors, etc. Work Location: This position is based out of the Denver, CO area and will include travel to other mining locations in CO, largely day trips with little if any overnight travel.
Commercial Food Service Technician Grand Canyon University Dining ServicesCommercial Food Service TechnicianPhoenix, AZInstall, service, repair, maintain, operate and adjust all types of industrial, commercial mechanical refrigeration, ventilation, and ventilating equipment, food service equipment and air dryers. Responsibilities: Install, service, repair, maintain refrigeration and kitchen cooking equipment and any other equipment including calibration of related instruments, gauges and controls.
Fire Alarm Service Technician The Hiller CompaniesFire Alarm Service TechnicianPhoenix, AZThe Fire Alarm Technician plays a critical role in safeguarding lives and property by conducting thorough and detailed inspections, performing required maintenance and providing expert advice to valued customers. Work closely with Deficiency Sellers to provide detailed inspection reports, material needs and other job-related notes, to prepare and deliver repair estimates in a timely manner, always ensuring customer satisfaction.
Injection Molding Process Technician Landscape ProductsInjection Molding Process TechnicianTolleson, ArizonaStrong Communication Skills – Able to articulate and express ideas effectively using written and verbal communication skills along with collaboration and teamwork. Troubleshoot injection molding equipment and process issues to minimize downtime and maintain production flow.
Vibration (Dynamics) Technician II Element Materials TechnologyVibration (Dynamics) Technician IITempe, Arizona$25–$35 / hourHowever, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. From early R&D, through complex regulatory approvals and into production, our global laboratory network of scientists, engineers, and technologists support customers to achieve assurance over product quality, sustainable outcomes, and market access.
Equipment Technician QCiEquipment TechnicianTempe, ArizonaWorking closely with equipment engineers, process engineers, and operations staff, the technician performs preventive maintenance, troubleshooting, and equipment recovery activities to maximize uptime, process stability, and production throughput in a cleanroom environment. The Equipment Technician – Plasma Processes supports daily operations and maintenance of plasma etch and deposition tools within QCi’s thin‑film lithium niobate wafer fab.
Fire Protection Install Technician The Hiller CompaniesFire Protection Install TechnicianPhoenix, AZKey Responsibilities: Install and service fire suppression systems on large mining equipment such as haul trucks, drills, loaders, shovels, as well as fixed fire systems in buildings, conveyors, etc. The Hiller Companies, LLC has an immediate opening for a Fire Protection install Technician for Southwest US Mining locations served by our Hiller Mining Team.
Senior P&C Field Services Technician WSP Global IncSenior P&C Field Services TechnicianPhoenix, AZ$55–$80 / hourBachelor of Science in Electrical Engineering or Technology degree in a similar discipline Experience in testing and troubleshooting electromechanical relays Experience in testing and commissioning electrical equipment on high voltage substations such as CTs, CCVTs, PLC systems, and DC systems, including batteries and battery chargers Current OSHA 30-hour or 40-hour HAZWOPER certification. Successful applicants will be involved in projects with our PTE Team and be a part of a growing organization that is solving problems and supporting client needs in electrical testing and commissioning in utility substations, industrial, and bulk electrical power systems.