UNKNOWN

FEED

We are looking for a EHS Engineer/Specialist for our Calvert AL location with responsibility for ensuring day-to-day compliance with Primetals Quality Management System and Environmental, Health and Safety Program at the local level to maintain ISO and EPA certifications. Computer Skills: Knowledge of database software; risk management software; project management software; spreadsheet software and word processing software.

Primetals Technologies

EH&S Engineer/Specialist

FULL_TIME

YEAR

CONSIDERED EXPERIENCE INCLUDES: Metrologist Maintenance Calibration Technician Metrology Analytical Laboratory Instrumentation Validation Chromatography Mass Spectrometry HPLC UPLC GC MS GC/MS Chemistry Analyzers #DiedreMoire #JobSearch #JobHunt #JobOpening #Hiring #Job #Jobs #Careers #Employment #fieldservicejobs #technicianjobs #LabTechnicianJobs #MetrologistJobs #CalibrationTech. Described compensation is not definite nor precise and may be estimated and approximate and is negotiable depending on market conditions and candidate availability and other factors and is solely at the discretion of employers.

Diedre Moire Corp.

Calibration Technician

Required Qualifications & Experience: The successful applicant will have calibration and/or controls background, and a number of years of experience in successfully delivering projects in engine calibration or related disciplines. Your knowledge and desire to bring about change will be invaluable in helping deliver innovative solutions that support communities across the globe in becoming safer and more sustainable.

Ricardo plc

Contractor - Calibration and Controls Engineer

The PMEL/PAMS Functional Engineer works closely with Product Owners, System Architects, Enterprise Integration personnel, Help Desk personnel, and Independent Test Teams to ensure modernization and sustainment activities preserve TMDE inventory integrity, calibration due-date visibility, workload forecasting, PMEL scheduling continuity, measurement uncertainty reporting, and operational certification workflows. This role also supports operational workflow validation, modernization backlog prioritization, data exchange analysis, audit readiness support, and quality-program sustainment activities affecting PMEL and calibration operations across the BMx ecosystem.

American Operations Corporation

PMEL / PAMS Functional Engineer

Workable

About this Role: Quanta Power Solutions is seeking a motivated Instrumentation Engineer I to support the design, development, and implementation of instrumentation and control systems for power generation, renewable energy, battery energy storage systems (BESS), data centers, substations, transmission, and industrial infrastructure projects. Our integrated approach spans power generation, battery energy storage, renewables, transmission, substation, and underground infrastructure — from concept to commissioning, we execute complex power infrastructure projects with the speed, certainty, and operational excellence our customers depend on.

Quanta Power Solutions, LLC

Instrumentation Engineer I

[AW]-iCims

Johnson Service Group (JSG) is a nationally recognized professional staffing and recruiting firm that is looking for an experienced Test Engineer P&C 1 to fill a one- year contract assignment in the Montgomery, AL area. Required PPE: Hard Hat, Safety Glasses, Gloves, Steel/Composite Toe Footwear, FR Clothing, Hearing Protection, Reflective Traffic Vest .

<div>
<div>
<h4><strong>At JSG, We Understand People</strong></h4>
</div>
</div>
<div>
<div>
<p>It is our mission to empower people, help our clients reach their goals, and hire motivated individuals.</p>
<p>Since our start in 1984, we’ve worked hard to establish our present position as the most effective cross-industry staffing and consulting solution available.</p>
<p>Headquartered in Chicago, IL with local offices throughout the United States and Canada, JSG proudly serves a diverse range of industries with the right solutions to help clients reach their company goals. Our client-centric approach enables us to create personalized solutions for businesses in need of top-tier talent.  Our dedication doesn’t stop at our clients. We strive to connect candidates with opportunities that match their skills and goals. More than just a go-between, we are a dependable bridge, uniting top talent with suitable opportunities, facilitating shared opportunities and growth.</p>
</div>
</div>

Johnson Service Group

Test Engineer P&C 1

HaleyMarketing

Bachelor of Science in Computer Science, Software Engineering, or a related technical field from an ABET‑accredited institution and 2–4 years of experience in the design, development, and testing of real‑time software applications and simulations; or a Master’s degree in Computer Science, Software Engineering, or a related technical field from an ABET‑accredited institution with less than 2 years of relevant experience simulations. July 8, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.

Everything we do is built on our commitment to do the right thing for our customers, our employees, and our communities. Learn more about the values and culture that are the foundations of our business.

Leidos

RF Seeker Engineer

Review manufacturing and engineering work instructions to confirm they are both executable and inspectable — covering sequence, drawing and specification references, configuration and effectivity, required tools and gauges, acceptance characteristics, workmanship criteria, inspection, witness, and hold points, and required objective evidence. The Manufacturing Quality Engineer partners with manufacturing engineering, production, and design engineering to make work instructions executable and inspectable, to establish inspection and metrology capability at the point of manufacture, and to resolve nonconformances at the source.

Quality Engineer

Pmel / Pams Functional Engineer

ea_via_bold

Mitsubishi Heavy Industries Ltd

Serves as the technical authority for production RF performance, test strategy, and yield optimization across defense RF systems including seekers, proximity sensors, height-of-burst sensors, antennas, and RF subsystems. Deep understanding of RF system performance including: gain/loss/dynamic range, noise figure and sensitivity, linearity and compression, phase noise and stability, and spurious/interference mechanisms.

RF Test Engineer

Performing Additional Construction Related Services- Services may include but not limited to; Maintaining marked up sets of project plans and specifications for future as-built drawings; performing routine inspections of construction as work proceeds, taking action to identify work that does not conform to the contract requirement, and notifying the VA and general contractor when work requires correction; compiling, thorough site inspections, lists of defects and omissions related to the work performed and providing these lists to the contractor for correction; monitoring project financial data and budgetary cost accounting; assisting in relocation efforts; administration of construction contract change orders (preparing cost estimates, reviewing cost proposal); Submittal Review; Request for Information Review and Responses; Daily Logs of Activity; coordination of Owner supplied equipment; Operational and Maintenance data; Closeout Submittals and other services as may be required by the VA. Monitoring Project Financial Data and Budgetary Cost Accounting - Services may include monitoring and review budgetary cost accounting; administration of construction contract change orders; maintaining spread sheets indicating project funds allowances, obligations, payments, balances, planned expenditures, etc., assist in the documentation of the administration of construction contract change orders (preparing cost estimates, reviewing cost proposal, preparing change order packages for the Contracting Officer).

APSI Construction Management Inc

Construction Manager/Mechanical Engineer

Electrical Engineer - Hospital Construction

Work closely with Product Owners, System Architects, Enterprise Integration personnel, Help Desk personnel, and Independent Test Teams to ensure modernization and sustainment activities preserve TMDE inventory integrity, calibration due-date visibility, workload forecasting, PMEL scheduling continuity, measurement uncertainty reporting, and operational certification workflows. Responsibilities: Provide functional and technical expertise supporting PAMS sustainment, modernization, PMEL operational workflows, TMDE visibility, calibration scheduling, quality program management, and measurement traceability activities.

BlueWater Federal Solutions

PMEL/PAMS Functional Engineer

Develop and assemble RF signal paths using cables, connectors, splitters, and combiners, and evaluate impedance matching, coupling, losses, and channel isolation. Perform link-budget, frequency, and interference analyses to characterize gain, loss, noise, linearity, isolation, and dynamic range, and recommend design improvements.

Qualis Corp

Radio Frequency Engineer

The Lead RF Engineer provides program support by bringing knowledge and skills to a hybrid development environment where waterfall and agile practices are combined to quickly bring feedback during the design, development, and testing of new products. Additional responsibilities include (but not limited to): Lead RF engineering execution, provide technical direction, and resolve design tradeoffs and technical issues across the hardware-in-the-loop system.

Lead Radio Frequency Engineer

Hands-on experience with electronics assembly processes and equipment including some of these: soldering, mechanical assembly, epoxy dispensing and curing, conformal coating, thermal interface material dispense/application, Automated Optical Inspection, component/assembly test, etc. As a Manufacturing Test Engineer you will participate in leading in the planning/execution of electrical test operations and will be responsible for developing automated test scripts, procedures, and other documentation needed to conduct spaceflight hardware testing at the factory.

Manufacturing Test Engineer

The Small Airborne Effectors Division within the Kinetic Effects Business Area is a team of more than 200 professionals responsible for developing, testing, and producing small airborne missiles, UAS, and payload effectors for a diverse set of customers including the US Special Operations Forces, US Air Force, and US Army. We are seeking an experienced, hands-on Systems Integration & Avionics Engineer to support a broad range of maintenance, integration, inspection, and troubleshooting activities for small airborne missiles, UAS, and payload effectors including avionics, instrument systems, and related airborne electronics.

Senior Integration & Avionics Engineer

Systems Integration & Avionics Engineer

RTR is a Department of Defense Major Range and Test Facility Base (MRTFB) supporting two primary mission areas: Space Operations and Test and Evaluation of DoD weapons systems , including offensive and defensive missiles, hypersonic systems, and space testing. Bachelor’s degree in Electrical Engineering, Computer Engineering, Physics, Systems Engineering, or a closely related STEM discipline with 12+ years of relevant experience; or a Master’s degree with 10+ years of relevant experience .

Calibration Engineer Jobs in Alabama

EH&S Engineer/Specialist Primetals Technologies

Calibration Technician Diedre Moire Corp.

Contractor - Calibration and Controls Engineer Ricardo plc

PMEL / PAMS Functional Engineer American Operations Corporation

Instrumentation Engineer I Quanta Power Solutions, LLC

Test Engineer P&C 1 Johnson Service Group

RF Seeker Engineer Leidos

Quality Engineer Leidos

Pmel / Pams Functional Engineer American Operations Corporation

EH&S Engineer/Specialist Mitsubishi Heavy Industries Ltd

RF Test Engineer TSC

Construction Manager/Mechanical Engineer APSI Construction Management Inc

Electrical Engineer - Hospital Construction APSI Construction Management Inc

PMEL/PAMS Functional Engineer BlueWater Federal Solutions

Radio Frequency Engineer Qualis Corp

Lead Radio Frequency Engineer Qualis Corp

Manufacturing Test Engineer Leidos

Senior Integration & Avionics Engineer Leidos

Systems Integration & Avionics Engineer Leidos

Lead Radar Engineer Leidos

Similar Job Searches

Stand out to leading employers.