UNKNOWN

FEED

Required Qualifications & Experience: The successful applicant will have calibration and/or controls background, and a number of years of experience in successfully delivering projects in engine calibration or related disciplines. Your knowledge and desire to bring about change will be invaluable in helping deliver innovative solutions that support communities across the globe in becoming safer and more sustainable.

Ricardo plc

Contractor - Calibration and Controls Engineer

Bachelor of Science in Computer Science, Software Engineering, or a related technical field from an ABET‑accredited institution and 2–4 years of experience in the design, development, and testing of real‑time software applications and simulations; or a Master’s degree in Computer Science, Software Engineering, or a related technical field from an ABET‑accredited institution with less than 2 years of relevant experience simulations. July 8, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.

Everything we do is built on our commitment to do the right thing for our customers, our employees, and our communities. Learn more about the values and culture that are the foundations of our business.

Leidos

RF Seeker Engineer

Review manufacturing and engineering work instructions to confirm they are both executable and inspectable — covering sequence, drawing and specification references, configuration and effectivity, required tools and gauges, acceptance characteristics, workmanship criteria, inspection, witness, and hold points, and required objective evidence. The Manufacturing Quality Engineer partners with manufacturing engineering, production, and design engineering to make work instructions executable and inspectable, to establish inspection and metrology capability at the point of manufacture, and to resolve nonconformances at the source.

Quality Engineer

Serves as the technical authority for production RF performance, test strategy, and yield optimization across defense RF systems including seekers, proximity sensors, height-of-burst sensors, antennas, and RF subsystems. Deep understanding of RF system performance including: gain/loss/dynamic range, noise figure and sensitivity, linearity and compression, phase noise and stability, and spurious/interference mechanisms.

RF Test Engineer

Develop and assemble RF signal paths using cables, connectors, splitters, and combiners, and evaluate impedance matching, coupling, losses, and channel isolation. Perform link-budget, frequency, and interference analyses to characterize gain, loss, noise, linearity, isolation, and dynamic range, and recommend design improvements.

Qualis Corp

Radio Frequency Engineer

The Lead RF Engineer provides program support by bringing knowledge and skills to a hybrid development environment where waterfall and agile practices are combined to quickly bring feedback during the design, development, and testing of new products. Additional responsibilities include (but not limited to): Lead RF engineering execution, provide technical direction, and resolve design tradeoffs and technical issues across the hardware-in-the-loop system.

Lead Radio Frequency Engineer

Hands-on experience with electronics assembly processes and equipment including some of these: soldering, mechanical assembly, epoxy dispensing and curing, conformal coating, thermal interface material dispense/application, Automated Optical Inspection, component/assembly test, etc. As a Manufacturing Test Engineer you will participate in leading in the planning/execution of electrical test operations and will be responsible for developing automated test scripts, procedures, and other documentation needed to conduct spaceflight hardware testing at the factory.

Manufacturing Test Engineer

The Small Airborne Effectors Division within the Kinetic Effects Business Area is a team of more than 200 professionals responsible for developing, testing, and producing small airborne missiles, UAS, and payload effectors for a diverse set of customers including the US Special Operations Forces, US Air Force, and US Army. We are seeking an experienced, hands-on Systems Integration & Avionics Engineer to support a broad range of maintenance, integration, inspection, and troubleshooting activities for small airborne missiles, UAS, and payload effectors including avionics, instrument systems, and related airborne electronics.

Systems Integration & Avionics Engineer

RTR is a Department of Defense Major Range and Test Facility Base (MRTFB) supporting two primary mission areas: Space Operations and Test and Evaluation of DoD weapons systems , including offensive and defensive missiles, hypersonic systems, and space testing. Bachelor’s degree in Electrical Engineering, Computer Engineering, Physics, Systems Engineering, or a closely related STEM discipline with 12+ years of relevant experience; or a Master’s degree with 10+ years of relevant experience .

Lead Radar Engineer

Senior Integration & Avionics Engineer

The Systems Test Engineer will serve as a primary technical integrator for formal system verification testing and will work closely with systems engineering, mechanical and electrical engineering, controls, software, modeling and simulation, manufacturing, quality, reliability, maintainability, test operations, external test facilities, and program leadership. Based in Huntsville, Alabama where laboratory facilities and headquarters are located, CFD Research also has office and laboratory facilities in Dayton, Ohio, prototyping test and evaluation facilities in Hollywood, Alabama, and office facilities in Fort Walton Beach, Florida.

CFD Research Corp

Systems Test Engineer

Experience working with Matlab, Python, or similar scientific-based programming tools to implement math or scienced based phenomenology related to linear systems, digital signal processing, tracking, or electromagnetics is required. Bachelor of Science in Engineering from an ABET-accredited institution plus 2- 8 years of experience in one or more listed experience areas, or a relevant MS degree in engineering plus 2-6 years of experience in one or more listed experience areas.

YEAR

SAIC is a premier Fortune 500® technology integrator driving our nation's digital transformation. Our robust portfolio of offerings across the defense, space, civilian, and intelligence markets includes secure high-end solutions in engineering, IT modernization, and mission solutions. Using our expertise and understanding of existing and emerging technologies, we integrate the best components from our own portfolio and our partner ecosystem to deliver innovative, effective, and efficient solutions that are critical to achieving our customers' missions.

We are a team of 26,000 strong driven by mission, united purpose, and inspired by opportunity. Headquartered in Reston, Virginia, SAIC has annual revenues of approximately $7.1 billion. For more information, visit saic.com.

Leidos Holdings Inc

Experience working with Matlab, Python, or similar scientific-based programming tools to implement math or scienced based phenomenology related to linear systems, digital signal processing, tracking, or electromagnetics is required. The selected candidate will maintain a familiarity with the fielded systems our division supports, investigate cutting-edge RF seeker technologies, and develop studies which educate our customers on seeker technology advancements.

Junior RF Seeker Engineer

Review manufacturing and engineering work instructions to confirm they are both executable and inspectable - covering sequence, drawing and specification references, configuration and effectivity, required tools and gauges, acceptance characteristics, workmanship criteria, inspection, witness, and hold points, and required objective evidence. The Manufacturing Quality Engineer partners with manufacturing engineering, production, and design engineering to make work instructions executable and inspectable, to establish inspection and metrology capability at the point of manufacture, and to resolve nonconformances at the source.

Familiarity with MIL-STD-810 Environmental Engineering Considerations and Laboratory Tests, MIL-STD-202 Test Methods for Electronic and Electrical Component Parts, MIL-STD-883 Test Methods and Procedures for Microcircuits, MIL-STD-105E / ISO?2859-1 Sampling Procedures for Inspection, MIL-STD-1540 Design and Development of Test Equipment or MIL-STD-31000 (formerly MIL-STD-310) Quality Assurance (QA) System Requirements. What You'll Get To Do: Responsible to perform full spectrum of design application parts management tasks on assigned system and sub-systems to ensure streamlined risk identification, risk mitigation, and tracking of at-risk component issues during the design and manufacturing of weapon systems and equipment under an overarching Systems Engineering framework.

Northrop Grumman solves the toughest problems in space, aeronautics, defense and cyberspace to meet the ever-evolving needs of our customers worldwide. Our 90,000 employees are Defining Possible every day using science, technology and engineering to create and deliver advanced systems, products and services. Northrop Grumman careers and internships are as varied as your interests, with a lifetime of potential that will allow you to work together with people from many backgrounds, personal passions and disciplines. 
 
© 2020 Northrop Grumman is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. U.S. Citizenship is required for most positions. For our complete EEO/AA and Pay Transparency statement, please visit www.northropgrumman.com/EEO

Northrop Grumman Corp

Principal Material Process Engineer - 17401

Familiarity with MIL-STD-810 Environmental Engineering Considerations and Laboratory Tests, MIL-STD-202 Test Methods for Electronic and Electrical Component Parts, MIL-STD-883 Test Methods and Procedures for Microcircuits, MIL-STD-105E / ISO 2859-1 Sampling Procedures for Inspection, MIL-STD-1540 Design and Development of Test Equipment or MIL-STD-31000 (formerly MIL-STD-310) Quality Assurance (QA) System Requirements. What You'll Get To Do: Responsible to perform full spectrum of design application parts management tasks on assigned system and sub-systems to ensure streamlined risk identification, risk mitigation, and tracking of at-risk component issues during the design and manufacturing of weapon systems and equipment under an overarching Systems Engineering framework.

Sentinel - Material Process Engineer - 17992

What you will get to do: The ideal candidate is a team player; but also, a strong independent contributor with strong leadership skills, demonstrated problem-solving skills, excellent communication skills, as well as interpersonal and organizational skills and a proactive, detail-oriented approach. The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate''s experience, education, skills and current market conditions.

Staff Engineer Logistics - 18320

Evaluate new and existing product's adhesive bonding and conformal coating chemistries, tooling, equipment and methodology for continuous process improvement opportunities following lean/six sigma principals. From tactical communications systems to airborne communications and information processing, we deliver high-reliability solutions that keep our first responders and war-fighters connected and protected in the field.

Sanmina Corp

Process Engineer

OTHER

The candidate will aid the customer in the operation and maintenance of the THAAD Fire Control & Communication (TFCC) Systems and THAAD Launching Station in accordance with established Interactive Electronic Technical Manuals (IETMs), Technical Manuals (TMs), policies, procedures, and processes. Performs all maintenance actions and troubleshooting procedures that are above the level of the Enhanced Operator/Maintainers (EOM) to include but not limited to: Software, hardware, interconnecting cabling, electrical system, and networks.

Akima, LLC

THAAD Field Engineer (Secret Clearance)

[AW]-iCims

The Software Engineer - Computer Vision develops real-time image-processing and tracking algorithms supporting beam control, target acquisition, and stabilization in defense laser platforms. Founded in 1990, IPG pioneered the development and commercialization of optical fiber-based lasers - a critical technology in our high-energy laser (HEL) systems, including the CROSSBOW program.

Calibration Engineer Jobs in Huntsville, AL

Contractor - Calibration and Controls Engineer Ricardo plc

RF Seeker Engineer Leidos

Quality Engineer Leidos

RF Test Engineer TSC

Radio Frequency Engineer Qualis Corp

Lead Radio Frequency Engineer Qualis Corp

Manufacturing Test Engineer Leidos

Systems Integration & Avionics Engineer Leidos

Lead Radar Engineer Leidos

Senior Integration & Avionics Engineer Leidos

Systems Test Engineer CFD Research Corp

RF Seeker Engineer Leidos Holdings Inc

Junior RF Seeker Engineer Leidos Holdings Inc

Quality Engineer Leidos Holdings Inc

Principal Material Process Engineer - 17401 Northrop Grumman Corp

Sentinel - Material Process Engineer - 17992 Northrop Grumman Corp

Staff Engineer Logistics - 18320 Northrop Grumman Corp

Process Engineer Sanmina Corp

THAAD Field Engineer (Secret Clearance) Akima, LLC

Software Engineer - Computer Vision IPG Photonics Corp

Similar Job Searches

See More Jobs

Stand out to leading employers.