40 Results for

Analog Design Engineer Jobs in San Diego, CA

Jobs

San Diego, CA30+ days ago

$175,000–$240,000

At Elevate Semiconductor, we empower semiconductor and system test customers by creating world class ICs that tackle the industry’s most complex automated test equipment challenges. As a Senior Staff Analog Design Engineer, you will be a technical leader and architect, shaping the direction of Elevate Semiconductor’s analog design strategy.

San Diego, CA24 days ago

$175,000–$240,000

Drive end-to-end ownership from concept, modeling, and design through tapeout, validation, and production release\Architect innovative solutions balancing noise, linearity, power consumption, and silicon area for high-performance applications. As a Principal Engineer in Analog Design at Elevate Semiconductor, you will operate at the highest level of technical leadership while remaining deeply hands-on in architecture and circuit design.

San Diego, California30+ days ago

Experience with the following is a plus: Digital PLL techniques, TDC or DSP and control theory experience related to digital PLLs, Dual charge-pump PLL designs, Fractional-N PLLs, spread-spectrum PLLs. Responsibilities: THE ROLE: AMD is searching for an experienced Circuit Design Engineer to join the fast-growing PLL design team, responsible for defining, specifying, and implementing current and future advanced PLL IPs powering AMD products.

New!

San Diego, CA6 days ago

$120,000–$180,000 Per Year

You will collaborate with a cross-functional team to optimize silicon design, leveraging mentorship and support from senior engineers to deliver innovative and cost-effective solutions. In this role, you will handle the physical layout and verification of highly complex, high-voltage, and mixed-signal solutions using advanced process technologies, ranging from 65nm CMOS to 100+V BCD.

San Diego, CA24 days ago

$96,000–$144,000

New!

San Diego, CA3 days ago

We're seeking highly skilled Analog Layout engineer to contribute to the evolution of Analog/Mixed-Signal (AMS) circuits, covering SerDes, PLLs, and sensors. Your responsibilities include crafting sophisticated layouts for mixed-signal and analog circuits, reviewing floorplans, and analyzing intricate circuits with circuit designers.

San Diego, CA30+ days ago

Full-time

This role offers the opportunity to tackle complex engineering challenges and make key technical decisions while collaborating closely with RF engineers, embedded software developers, and system architects to advance the next generation of satellite and tactical waveform technologies. Utilize Digital Programmable Technology: Work with technologies such as Field Programmable Gate Arrays (FPGA), System on Chip (SoC), Analog to Digital Converters (ADC), and Digital to Analog Converters (DAC) to implement designs effectively.

San Diego, CA30+ days ago

$190,000–$220,000

Individual compensation decisions are based on a number of factors, including but not limited to previous experience and skills acquired prior to joining Syntiant, cost of living in the assigned work location, assigned schedule, and salaries of similarly situated peers at the company. The company’s purpose-built silicon and hardware-agnostic models are being deployed globally to power edge AI speech, audio, sensor and vision applications across a wide range of consumer and industrial use cases, from earbuds to automobiles.

San Diego, CA30+ days ago

This role will work closely with cross-functional teams, including mechanical engineering, firmware development, and electrochemistry to drive innovation and deliver high-quality products. Help with the transition of electrical designs from R&D to pilot-scale production and large-volume manufacturing, ensuring design for manufacturability (DFM) and testability (DFT).

San Diego, CA30+ days ago

$190,000–$235,000

Lead complex engineering programs from concept through production, including requirements definition, architecture development, risk assessment, and cross‑functional alignment. This position is ideal for a highly experienced engineer who thrives in ambiguity, leads with initiative, and elevates the technical bar for the entire organization.

San Diego, CA30+ days ago

$125,000–$175,000

Use tenacity, patience, self-discipline and passion for excellence to assure accuracy of execution schedule, data quality/integrity, conformance to company best practices, clarity in communication and documentation. Execute complex engineering tasks involving planning, preparation, data/information collection and analysis and decision-making in a process involving peer reviews and documentation of the results.

San Diego, CA30+ days ago

Self driven and highly motivated with passion for crafting and innovating, attention to details, strong problem-solving skills + Hands-on maker demonstrated through hardware projects, passion for bringing ideas to life + Need to be comfortable working in fast paced and highly collaborative work environment Proficiency in EE validation/characterization tasks, and familiar with lab equipment and test automation + Develop factory test plan and manage manufacturer partner to conduct data collection, and analyze large-scale data Ability to communicate and present technology updates and project status to executives and functional teams Consumer electronics and high-volume production experience + Modern display technologies, such as LCD, TFT, OLED, LED etc. + Experience with design and analysis in one of these areas: power electronics, analog/digital circuits, or high-speed signal integrity + Hands-on experience in hardware prototype bring-up, debugging, validation and failure analysis + Experience with full ECAD workflow for schematic capture, PCB layout, BOM generation + Skills in scripting, factory data processing, or test automation, and programming experience in Python, Shell script, MATLAB or similar .

Poway, CA9 days ago

Typically requires a Bachelors degree, Masters degree or PhD in Engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; four or more years of experience with a Bachelors degree or two or more years of experience with a Masters degree. + Must have a complete understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties.

San Diego, CA10 days ago

These encompass high-power motor drives, power conditioning systems, pulsed power systems, battery systems, high energy laser systems, space systems, advanced sensors, laser communications, target tracking, laser beam control/pointing, signal/image processing, and instrumentation. The successful candidate will report to an EE Design Team Manager and, alongside high-caliber staff, will be engaged in the engineering support and new development of High Energy Laser (HEL) Systems, advanced airborne sensors, laser communications systems for space applications, and a variety of other technologies in the expanding product portfolio of GA-EMS.

San Diego, CA30+ days ago

$120,900–$152,700 Per Year

In addition, the company is currently developing the G4X Spatial Sequencer, an upgrade to the G4, which will leverage Singular's proprietary sequencing technology, applying it as an in situ readout for transcriptomics, proteomics and fluorescent H&E in tissue, with spatial context. The commercially available G4® Sequencing Platform is a powerful, highly versatile benchtop genomic sequencer designed to produce fast and accurate results.

San Diego, CA30+ days ago

$140,000–$180,000

Join our fast‑paced and passionate team as a Senior PCB Layout Engineer 4. In this role, you will take ownership of complex PCB designs, collaborate closely with electrical and mechanical engineers, and help establish layout practices that support our mission and growth. This is a hands‑on position for an engineer who thrives in a dynamic startup environment, communicates clearly, and consistently delivers high‑quality layout work for high‑performance RF and mixed‑signal systems.

San Diego, CA30+ days ago

$80,000–$110,000

At Elevate Semiconductor, we empower semiconductor and system test customers by creating world-class ICs that tackle the industry’s most complex automated test equipment (ATE) challenges. You will ensure quality, reliability, and efficiency by maintaining test systems, troubleshooting complex issues, and driving continuous improvement across production operations.

San Diego, CA30+ days ago

Full-time

You’ll work across multiple projects, collaborating with cross-functional teams to deliver high-performance space hardware from concept to launch—guiding PCB layouts, solving complex challenges, and ensuring signal integrity throughout the design process. Design and Develop Hardware Systems: Lead the design, testing, and debugging of analog, power, and embedded board-level electronic systems with high-speed digital interfaces such as Rocket I/O, Ethernet, PCI-e, DDR, RS-422, and LVDS.

New!

Poway, CA3 days ago

Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; nine or more years of experience with a bachelors degree, seven or more years of experience with a masters degree, or four or more years with a PhD. Reporting to the Engineering Manager in the Advanced Programs Office, this role collaborates with Chief Engineers and Integrated Product Team (IPT) leaders to develop the next generation of Unmanned Intelligence, Surveillance, and Reconnaissance (ISR) platforms.

San Diego, CA30+ days ago

$175,000–$225,000

New!

Poway, CA4 days ago

This opportunity involves working within a multidisciplinary team of engineers—including electrical, control, mechanical, and other cross-functional experts—to design and develop bi-directional AC/DC converters for motor drive and power generation applications. + Create and maintain documentation to support production, including test procedures, records, bills of materials, interface control documents (ICDs), specification control documents (SCDs), engineering change orders (ECOs), and production support materials.

San Diego, CA30 days ago

Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; six or more years of experience with a bachelors degree, four or more years of experience with a masters degree, or two or more years with a PhD. General Atomics (GA), and its affiliated companies, is one of the world’s leading resources for high-technology systems development ranging from the nuclear fuel cycle to remotely piloted aircraft, airborne sensors, and advanced electric, electronic, wireless and laser technologies.

San Diego, CA30+ days ago

VoIP Communications Engineer to assist in designing, deploying, and securing advanced unified communications solutions built on a ZuluCall/Comms platform for military medical treatment facilities in the pacific Region. The ideal candidate has deep SIP/VoIP experience across multi-vendor platforms, strong signaling and troubleshooting expertise, and the ability to support secure deployments in DoD and health-care networks.

San Diego, CA30+ days ago

This role will work closely with electrical engineering, mechanical engineering, electrochemistry, and software teams to bring biosensing systems from prototype to production. Develop and execute firmware test plans, including unit testing, integration testing, and hardware-in-the-loop (HIL) testing.

San Diego, CA30+ days ago

$110,000–$150,000 Per Year

You will contribute significantly to ongoing R&D initiatives and continuous performance improvement of our C-UAS effectors, including developing comprehensive test plans, conducting data measurements and collection, and participating in hands-on field and laboratory test & evaluation activities. Test and troubleshoot hardware systems through the analysis of hardware schematics, component datasheets, and PCB layout; driving root cause analysis and resolution of process issues, non-conformances, and yield concerns.

San Diego, CALIFORNIA30+ days ago

Our client, in San Diego, is an award-winning engineering firm that has been named "Best Place to Work" for the past 15 years. Perform electrical calculations (arc flash, coordination, short circuit, voltage drop, load flow) using ETAP/SKM.

San Diego, CALIFORNIA30+ days ago

Perform electrical calculations (arc flash, coordination, short circuit, voltage drop, load flow) using ETAP/SKM. Our client is an award-winning engineering firm recognized as a “Best Place to Work” for the past 15 years.

San Diego, California10 days ago

$112,000–$160,000 Per Year

An employee’s pay within the salary range will be based on several factors including, but limited to, relevant education, qualifications, certifications, experience, skills, seniority, geographic location, performance, and business or organizational needs. Carollo’s benefits package includes paid time off and holidays, comprehensive health insurance coverage, pre-tax savings account options for healthcare, dependent care and commuter expenses, disability insurance and life insurance options for you and your dependents.

San Diego, CA12 days ago

Prepare calculations including whole building electrical loads, lighting calculations, power distribution calculations, equipment sizing, editing specification sections, and creating punch lists. Troubleshoot/resolve complex problems (conflicting design requirements, code issues, varying design options, and difficult condition requirements).

San Diego, CA30+ days ago

$100,000–$150,000 Per Year

We are seeking a highly skilled and experienced Electrical Engineer to join our dynamic team in San Diego with pay ranging from 100K-150K. The ideal candidate will be responsible for designing, developing, and testing electrical systems and components for various projects.

San Diego, CA12 days ago

In this role, you will be responsible for designing and integrating aircraft avionics and electrical systems, including electrical architecture development, power distribution design, grounding network design, and system-level integration. By combining advanced aerodynamics with innovative design, Natilus aircraft achieve exceptional fuel efficiency, increased payload capacity, and seamless compatibility with existing airport infrastructure.

San Diego, CA30+ days ago

$66,000–$94,810 Per Year

This position offers you the opportunity to work in a project team environment with other engineers and designers involved in the detailed electrical design and project management of high voltage substation projects. Ability to work with Designer to develop substation single line diagrams, relaying & metering diagrams, DC schematic diagrams, substation plan & sections, grounding plans, etc.

San Diego, California30+ days ago

$84,854–$157,586 Per Year

Job Summary: Plans and implements the design, manufacture, installation and/or maintenance of electrical systems and apparatus, such as electric motors, machinery controls, wiring and power systems/devices, for the generation, transmission and control of electric power. Company Overview: General Dynamics Ordnance and Tactical Systems (OTS) is a global leader in the design, engineering and production of munitions, energetics, weapons, armaments, and missile subsystems around the world.

San Diego, CA30+ days ago

This manager will continuously transform the organization to scale capability and impact: leveraging AI and advanced tooling, building strategic vendor partnerships that extend our simulation and analysis capacity, identifying and closing talent gaps to deepen engineering rigor, leverage innovation to efficiently determine root cause and apply learnings across the organization, and influencing component suppliers to improve their design and validation methodologies for custom variations of catalog parts. Join Apple's Battery Engineering team as a Hardware Manager for Battery Management Systems (BMS) where you will lead and develop a sizable team of BMS hardware engineering managers and their engineers, focusing your time on strategic leadership, cross-functional orchestration, and organizational capability building while maintaining technical credibility through selective deep engagement.

San Diego, CA17 days ago

Required Experience: Electrical Wiring Interconnect System (EWIS) cable and harness design for high-reliability aerospace, space systems, and unmanned space vehicle applications; electro-mechanical integration of electrical engineering hardware including cables and harnessing, circuit boards, and electronics modules using intelligent ECAD/MCAD design tools and approaches in a collaborative, cross-functional engineering development environment; cross-functional systems architecture and design in product or technology development for complex, systems-of-systems; IPC-WHMA-620 Space Addendum; mixed-signal (analog/digital) electrical system interconnect design; analysis, design, and implementation of hardware systems to include digital, analog, power, laser/optical, and RF is required; familiarity with DoD technical review process (at a minimum: SRR, PDR, CDR, TRR). The successful candidate will report to the Director of Electrical Technologies and, alongside high-caliber engineering management staff, will be engaged in the engineering support and new development of high-power electromagnetic systems, high-energy laser systems, laser and electro-optical sensors for airborne payloads and space vehicles, satellite space systems, cutting-edge technology ventures into Defense and “NewSpace,” and a variety of disruptive technologies in the expanding product portfolio of GA-EMS.

San Diego, CA17 days ago

Required Experience: Printed circuit board electrical computer-aided design for high-reliability aerospace and space systems; electro-mechanical integration of electrical engineering hardware including cables and harnessing, circuit boards, and electronics modules using intelligent ECAD/MCAD design tools and approaches in a collaborative, cross-functional engineering development environment; cross-functional systems architecture and design in product or technology development for complex, systems-of-systems; IPC-WHMA-610 Space Addendum; power supply and mixed-signal (analog/digital) electronics circuit design; analysis, design, and implementation of hardware systems to include digital, analog, power, laser/optical, and RF is required; familiarity with DoD technical review process (at a minimum: SRR, PDR, CDR, TRR). The successful candidate will report to the Director of Electrical Technologies and, alongside high-caliber engineering management staff, will be engaged in the engineering support and new development of high-power electromagnetic systems, high-energy laser systems, laser and electro-optical sensors for airborne payloads and space vehicles, satellite space systems, cutting-edge technology ventures into Defense and “NewSpace,” and a variety of disruptive technologies in the expanding product portfolio of GA-EMS.

New!

San Diego, CA4 days ago

These include products such as the design and fabrication of linear motors, superconducting and conventional rotating motors, power inverters, high-energy capacitors, radiation monitoring systems, high-voltage direct current power distribution systems and numerous other products. General Atomics Electromagnetic Systems (GA-EMS) is a supplier of advanced electromagnetic systems, related power equipment and other high technology products for a variety of government and commercial applications.

New!

Poway, CA1 day ago

Typically requires a Bachelors, Masters or PhD in engineering or a related technical field as well as fifteen or more years of progressively complex design / electrical engineering experience with at least nine of those years having management responsibilities. + Collaborate closely with software engineering, mechanical engineering, manufacturing, quality, supply chain, human resources, program management, and executive leadership teams.

New!

Poway, CA1 day ago

Typically requires an Associates degree or a training certificate from a recognized organization indicating completion of training in basic electronics technology and in CAD design software and two or more years of progressive experience designing PC boards utilizing CAD engineering design software. + Complete PCB designs and generate/validate all deliverables, including fabrication and assembly drawings, RS274X Gerber files, NC drill files, IPC-356 files, back-annotated schematics, BOMs, pick-and-place files, etc.

El Cajon, California30+ days ago

Q Microwave, a leader in the precision RF manufacturing, design and manufacture of cutting-edge military and defense microwave solutions, is seeking a Production Electronics Technician to join our entrepreneurial, collaborative, and fast-paced team located in El Cajon, CA. As a part of Amphenol's global network of over 130 business units, Q Microwave operates with the technical focus and agility of a specialized design center while leveraging the strength, stability, and resources of one of the world's largest interconnect solution providers.

Stand out to leading employers.

Upload your resume and let employers find you for new Analog Design Engineer job openings. Plus, receive relevant job matches delivered straight to your inbox.

Create A Free Account

Analog Design Engineer Jobs in San Diego, CA

Senior Staff Analog Design Engineer Elevate Semiconductor

Principal Analog Design Engineer Elevate Semiconductor

Analog Design Engineer for PLL/Adaptive Clocking Advanced Micro Devices, Inc

Staff Analog IC Layout Engineer Elevate Semiconductor

Senior Analog IC Layout Engineer Elevate Semiconductor

Analog Layout Engineer Apple, Inc.

Digital Modem Design Engineer Innoflight LLC

Digital Design Engineer Syntiant

Sr. Electrical Engineer Caltek Staffing

Principal Electrical Engineer 5 Monarch Quantum

Electrical Engineer 3 Monarch Quantum

Display Electrical Engineer Apple

Engineer III General Atomics

Engineer VI General Atomics

Sr. Firmware Engineer Singular Genomics

Senior PCB Layout Engineer 4 Monarch Quantum

Product Engineer Elevate Semiconductor

Hardware Engineer II Innoflight LLC

Engineer V General Atomics

Electrical Engineer 4 Monarch Quantum

Engineer II General Atomics

Engineer IV General Atomics

Sr. VoIP Communications Engineer Bowhead / UIC Technical Services

Firmware Engineer Caltek Staffing

Senior Hardware Electrical engineer Judge Group

Electrical Engineer (PE Required) K2 Staffing

Senior Electrical Engineer Healthcare K2 Staffing

Mid Level Electrical Engineer (Power) Carollo Engineers Inc.

Electrical Engineer Harrison Consulting Solutions

Electrical Engineer The Perillo Group

Avionics & Electrical Engineer Natilus

Substation Electrical Engineer 2 - Grid Sargent & Lundy

Sr Electrical Engineer General Dynamics Ordnance & Tactical Systems

BMS Hardware Engineering Manager Apple

Engineering Manager II General Atomics

Engineering Manager III General Atomics

Technician IV General Atomics

Engineering Manager V General Atomics

PC Board Designer III General Atomics

Production Electronics Technician Q Microwave

Similar Job Searches