UNKNOWN

FEED

Perform equipment pre-operational check and maintenance of all work center support equipment/IMRL; operate ground support equipment such as electrical power supply, tow tractors, light carts and engine starting units; check for fuel contamination by draining samples from low point drains; replenish fuel, oil, water, waste system chemicals, oxygen, and hydraulic fluid; and clean exterior and/or interior of aircraft, using portable platform ladders, brushes, rags, water hose, and vacuum. The Aircraft Worker performs pre/post-operational checks, fueling and operation of aircraft & support equipment, to include conditional/scheduled inspections and periodic maintenance.

HOUR

Amentum

Aircraft Worker

ea_via_bold

Duties include walking, climbing, standing, stooping, stretching, and squatting for purposes of moving equipment, boarding and de-boarding the aircraft, performing maintenance using ladders, and performing maintenance atop and below aircraft. Must read, interpret and use manufacturers and aircraft maintenance manuals, service bulletins, blueprints, wiring/schematic diagrams, data tables and other specifications to determine feasibility and method to repair or replace malfunctioning or damaged components.

Aircraft Mechanic II

sourcestack_via_bold

Relevant Backgrounds May Include (Not Required): Army: 91B (Wheeled Vehicle Mechanic), 91D (Power Generation Equipment Repairer), 91E (Allied Trades Specialist), 91C (Utilities Equipment Repairer), 15T (UH-60 Helicopter Repairer). Tyson Foods proudly supports the Department of Defense SkillBridge program and invites transitioning service members to join our team as an Equipment Maintenance Fellow.

Tyson Foods Inc

Skillbridge Fellowship - Industrial Maintenance Technician

FULL_TIME

OTHER

The MRT (Mobile Response Team) Aircraft Maintenance Technician reports to the MRT A&P Supervisor and is responsible for traveling to customer aircraft to perform the efficient execution of the work scope and for the maintenance, preventive maintenance, and alterations performed under the authority of the Clay Lacy FAA Certificated Repair Station. Our culture is service-driven and collaborative, grounded in excellence, care, accountability, and trust, while supporting our teams in a fast-paced, high-responsibility environment.

Clay Lacy Aviation

MRT A&P Technician I | KSNA

equestftpin

Headquartered in Silicon Valley, California, Archer is a leader in the next-gen aerospace sector building an end-to-end advanced air mobility platform that delivers air taxis, unmanned aircraft systems ("UAS"), aviation-related physical artificial intelligence ("AI") solutions, and other technologies to customers worldwide across the commercial aerospace and defense sectors. Our sights are set high and our problems are hard, and we believe that diversity in the workplace is what makes us smarter, drives better insights, and will ultimately lift us all to success.

YEAR

Archer

Flight Test Instrumentation Technician

GreenHouseAPI

Under supervision, removes, reinstalls, and replaces major components such as rotor and tail rotor blades, main transmissions, tail rotor gear boxes, and main rotor and tail rotor hub assemblies, engines and subassemblies. Job Requirements: Current, valid A&P License with verifiable experience High School Diploma High attention to detail and thrives in a team environment Willing to support on-call schedule, which in some cases, may include weekends Must be able to lift 70lbs.

Helinet Aviation

Helicopter Maintenance Technician

The position requires comprehensive technical expertise and understanding of structural, composite, mechanical and electrical systems and associated regulations and related assembly/installation processes, tools, composites, templates, fixtures, testing and measuring devices as well as judgment to determine correct tool(s) and experience. This position is responsible for coordinating and performing a wide variety of complex structural composite, and/or mechanical operations to ensure appropriate aircraft structural, avionics, and electrical systems are installed, tested and operational.

General Atomics

Integration Technician IV

Because the role involves operating vehicles and moving aircraft near people, buildings, and other aircraft, strict adherence to safety protocols is essential to protect yourself, others, and both company and customer property. The Line Service Technician I provides outstanding customer service while supporting all ground operations for inbound and outbound aircraft, crews, and passengers.

Line Service Technician I, KVNY

Take your military and MOD experience to the next level by performing critical repairs, installations, and upgrades on advanced aircraft systems in a fast-paced, mission-driven environment. Join our dynamic MOD Team at Beale AFB as a Light Industrial - Electrical Technician, specializing in aircraft avionics and electrical environmental systems.

Indotronix International Corporation

Light Industrial - Electrical Technician

Essential Functions and Responsibilities include the following:• Performs inspections and repairs of aircraft and components in accordance with maintenance procedures, airworthiness directives, service bulletins, service letters, and applicable Federal Aviation Regulations• Upon installation or removal of any component or assembly, the Mechanic shall verify by physical inspection or markings on the part that the part number and serial number match the associated documentation • Ensures all aircraft maintenance documentation is executed in compliance with applicable Federal Aviation Regulations, company policies and procedures, and applicable maintenance manuals to include specific chapters• Actively participates in the continuous improvement phase (level 4) of the company's Safety Management System (SMS) and is familiar with the SMS policies, processes, and procedures• Maintains work area in a clean and professional mannerResponsible for correcting compliance or safety issues when directed by the Director of Operations, Director of Maintenance, Chief Pilot, Regional Maintenance Director, Director of Safety, or Lead Mechanic• Responsible for advising the Pilot in Command (PIC) of any maintenance issues that would take an aircraft out of service• Responsible for validating or confirming the data in the Status Report concerning the aircraft he or she is working on including• Request aviation parts and supplies in order to maintain an adequate and orderly inventory of all stock items to ensure prompt repairs for operational readiness• Other Duties as assigned. Education & Experience• High school diploma or general education degree (GED) and 2 to 5 years' related experience and/or training; or equivalent combination of education and experience• Factory airframe/power plant schools preferred, active/current A&P REQUIRED• FAR 135 operations preferred Skills• Electrical troubleshooting and refined vibration-balancing• Sheet metal and composite repair procedures• Ability to read and understand various documents such as 337's, Service Bulletins, AD's, etc.• Ability to multi-task in a fast paced, constantly changing environment• Ability to be a team player with a professional attitude• Ability to work a flexible schedule including overtime and 24/7 on-call rotation• Efficient in the use of electronic or paper based manuals and able to navigate through vendor data to find necessary information• Ability to learn and utilize the Company's ERP system (Ramco)• Strong communication skills• Ability to apply creativity and problem solving skills in troubleshooting workComputer Skills• Proficient with Microsoft Suite, including Word, Excel, PowerPoint and Outlook • RAMCO experience preferred Certificates, Licenses, Registrations• FAA A&P License in good standing.

Air Methods Corp

Aviation Maintenance Technician 135

You’ll work closely with engineers and other technicians to manufacture composite parts, complete bonded assemblies, and install airframe components, propulsion mounts, wiring harnesses, and actuation systems. You’ll support prototype builds, composite layups, mold and tool preparation, vacuum bagging, oven curing, trimming, bonding, and final aircraft assembly across multiple projects.

Odys

Composite Technician - Airframe

DUTIES AND RESPONSIBILITIES: Under general supervision, this position is responsible for technical and operational support in the installation, application and maintenance of unmanned aerial vehicle electronic equipment to include ground control stations, ground data terminals and ground support equipment in accordance with technical specifications, engineering instructions and technical orders, procedures and regulations. Typically requires education or formal training equivalent to the completion of a two-year technical degree or trade school equivalency as well six or more years'' experience in aviation or electronics.

Field Avionics Technician III

Processes inbound or outbound FAI and deliverable submissions accurately and timely including: receipt and analysis of parts and/or supporting documentation; completion of associated records and logs; communication of submission status as needed to QEs, managers, engineers or interested parties; processing of parts after completion; maintaining records and files associated with submissions; and other related tasks. Processes internal non-conforming material as needed in support of QE including: retrieval and analysis of material, interpretation of preliminary findings and restatement of problem statements to ensure understanding of problem, processing material through the necessary NC processes, communication of status to concerned parties, maintaining necessary documentation and processing material to internal and external suppliers.

Who We Are
Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we&rsquo;ve been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world&rsquo;s most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution&rsquo;s permanent collection in Washington, DC.
Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty &ndash; and succeed.
We offer our employees&nbsp;full medical, dental, vision benefits all&nbsp;beginning&nbsp;day 1 of employment.&nbsp; &nbsp;For more details visit: <a href="http://www.myavbenefits.com">www.myavbenefits.com</a> Paid time&nbsp;off:&nbsp;&nbsp;2 weeks vacation, plus paid company holiday shut down Dec. 25 - Jan 1. 9/80 work schedule: every other Friday off! A fun and collaborative work environment encouraging personal growth and creative innovation;&nbsp;AV is a tech start-up with stability.

AeroVironment Inc

Quality Technician II

ADAPTED_NOW

As trusted partners to leading aerospace and defense OEMs and Tier 1 suppliers, we connect professionals with career opportunities to grow and excel in aviation, aerospace, and defense. The Structures Company is a premier national aerospace and defense staffing agency specializing in contract, contract-to-hire, and direct hire placements.

The Structures Company

Maintenance Technician

We design, develop and manufacture an ecosystem of technologies including proprietary flight control software, avionics, high power density motors, motor controllers, batteries, and custom carbon-fiber composite airframes. Today, we supply autonomous electric aircraft for cargo transport and crop protection to real-world customers across four separate continents and have secured industry-first regulatory approvals from the FAA.

Pyka Inc

Composite Technician (Multiple Levels)

Build, route, and terminate low- and high-voltage (14 V DC to 800 V DC) wiring harnesses, connectors, and cable assemblies for propulsion, avionics, and flight-control systems. • Execute continuity, insulation-resistance, and hipot tests; diagnose faults with rapid troubleshooting, oscilloscopes, multimeters, CAN bus analyzers, and high-voltage safety equipment.

Electrical Technician

Assists with modification, fabrication, assembly, operations, installation, repair and maintenance of general laboratory, experimental and commercial equipment; assists in set up and may conduct routine experiments and tests; records data. Ability and willingness to work on systems which have unusual conditions such as high pressure, high voltage, high energy, cryogens, or radioactive materials.

Technician I

As trusted partners to leading aerospace and defense OEMs and Tier 1 suppliers, we connect professionals with career opportunities to grow and excel in aviation, aerospace, and defense. Performs high-volume repetitive testing of commercial and military precision hydraulic and pneumatic high-pressure fluid power systems.

Sr Engineering Technician

Ceipal

The company works across air taxis, UAS, AI and powertrain development - building real-world systems that combine software intelligence with physical hardware. Our sights are set high and our problems are hard, and we believe that diversity in the workplace is what makes us smarter, drives better insights, and will ultimately lift us all to success.

Archer Aviation Inc

Headquartered in Silicon Valley, California, Archer is a leader in the next-gen aerospace sector building an end-to-end advanced air mobility platform that delivers air taxis, unmanned aircraft systems ("UAS"), aviation-related physical artificial intelligence ("AI") solutions, and other technologies to customers worldwide across the commercial aerospace and defense sectors. About the role: At Archer, we're scaling production of our High Voltage Electric Propulsion System - the heart of our eVTOL aircraft, which includes the High Voltage Battery, Electric Motor and Propeller assemblies and represents one of the most technically demanding, highly automated manufacturing systems in our factory.

Aircraft Technician Jobs in California

Aircraft Worker Amentum

Aircraft Mechanic II Amentum

Skillbridge Fellowship - Industrial Maintenance Technician Tyson Foods Inc

MRT A&P Technician I | KSNA Clay Lacy Aviation

Flight Test Instrumentation Technician Archer

Helicopter Maintenance Technician Helinet Aviation

Integration Technician IV General Atomics

Line Service Technician I, KVNY Clay Lacy Aviation

Light Industrial - Electrical Technician Indotronix International Corporation

Aviation Maintenance Technician 135 Air Methods Corp

Composite Technician - Airframe Odys

Field Avionics Technician III General Atomics

Quality Technician II AeroVironment Inc

Maintenance Technician The Structures Company

Composite Technician (Multiple Levels) Pyka Inc

Electrical Technician Odys

Technician I General Atomics

Sr Engineering Technician The Structures Company

Flight Test Instrumentation Technician Archer Aviation Inc

Powertrain Manufacturing Test Engineer Archer Aviation

Similar Job Searches

Stand out to leading employers.