NewMechanical Engineer STS Technical ServicesMechanical EngineerWarren, MISTS Technical Services is seeking experienced Mechanical Engineers to support product design, development, and analysis initiatives in Warren, Michigan. STS Technical Services is a Top 100 Staffing Firm that partners with leading organizations across aerospace, manufacturing, defense, and industrial sectors.
NewQuality Engineer STS Technical ServicesQuality EngineerWarren, MISupport quality initiatives across areas including design, incoming materials, process control, product evaluation, reliability, inventory control, metrology, automated testing, software, research and development, and administrative functions. This role supports continuous improvement by identifying risks, analyzing data, and implementing solutions that protect quality and performance.
NewLead Engineer - Active Protection Systems (APS) DCS CorporationLead Engineer - Active Protection Systems (APS)Sterling Heights, MICoordinates required APS interfaces with common architecture (i.e. VPS Base Kit) to ensure software efficiencies, commonality, compatibility, and configuration management to include the cost, schedule, and performance planning activities. Leads the engineering activities in support of the APS portfolio (soft kill, hard kill, Counter UAS and threat detection), under Product Manager Vehicle Protection Systems (PdM VPS).
NewCamera Tuning Engineer Management Business Solutions, Inc.Camera Tuning EngineerZeeland, MIThe Camera Tuning Engineer will develop a deep understanding of image signal processing pipelines, fine-tune those pipelines for optimal results, and collaborate across engineering and stakeholder teams to meet the unique image quality needs of diverse product use cases. This individual will contribute to the development and improvement of vision products by creating and executing tests and data collection to define changes that enhance image quality across various product lines.
NewElectrical Design Engineer Amphenol Borisch TechnologiesElectrical Design EngineerGrand Rapids, Michigan
NewMechanical Design Engineer Amphenol Borisch TechnologiesMechanical Design EngineerGrand Rapids, MichiganFull timeUnder general direction of the Director of Engineering, the Mechanical Design Engineer is responsible for new product, mechanical design, product improvements, documentation, production fixture design, reliability analysis as well as providing technical expertise and product knowledge using a variety of engineering disciplines. Amphenol Borisch Technologies (ABT), a division of Amphenol Corporation, is an industry leader in providing high-reliability electronic systems for Aerospace and Defense companies across the globe.
NewSales Engineer Amphenol Borisch TechnologiesSales EngineerGrand Rapids, MichiganQualified candidates will participate in the Amphenol North American Military Group Sales Rotational and Training Program, a program that blends training, mentorship, & hands-on experience to develop full cycle sales capabilities grounded in our Amphenolian spirit. Amphenol Borisch Technologies (ABT), a division of Amphenol Corporation, is an industry leader in providing high-reliability electronic systems for Aerospace and Defense companies across the globe.
Manufacturing Engineer Supervisor - Aerospace Lincoln Electric Holdings IncManufacturing Engineer Supervisor - AerospaceMacomb, MI$100,000–$150,000 / yearCoordinate multiple projects of med-high complexity and risk, including multiple sub-projects, and comprised of cross-functional and/or multi-site project team members. This position may have access to various types of Controlled Unclassified Information (CUI) and/or information and tangible items subject to U.S. export controls, as well as be subject to certain customer/contractual requirements.
Technical Project Engineer - Aerospace/Defense Williams InternationalTechnical Project Engineer - Aerospace/DefensePontiac, MIQualifications: Bachelor's or Master's Degree in Engineering (Mechanical or Aerospace preferred) Practical project and engineering design, manufacturing, test, and analysis job knowledge and skills gained with a minimum of 5 years of prior related work experience Highly motivated and organized individual who is approachable, a natural planner and a decision maker The ability to summarize and present the critical elements of a program, as well as its current status and future plans, is essential Strong analytical and problem-solving skills Proficiency using NX with Teamcenter Excellent time management and organizational skills Excellent written and verbal communication skills Proficiency with program management software; Microsoft Project Proficient in Microsoft Office Suite (Outlook, Word, Excel, Project and PowerPoint) U. Preferred Qualifications: Experience in product development with core proficiency in either manufacturing process design, product definition and design, or product test Experience as a customer interface Experience with PPAP or statistics or product quality Experience with DOD programs Secret Clearance.
Systems Safety Engineer - Aerospace Safety Williams InternationalSystems Safety Engineer - Aerospace SafetyPontiac, MITo be considered for this position, you must have: • Bachelor's Degree in Engineering, preferred but not required in Systems, Aerospace, Mechanical or Electrical • 5+ years of experience in aerospace safety principles • Direct Experience in SAE ARP4761 or MIL-STD-882 Analyses, such as: • Aircraft and System Functional Hazard Assessments (AFHA/SFHAs) • Aircraft and System Safety Assessment (PASA, PSSA, ASA, SSA) • Particular Risk Analysis (PRA) • Zonal Safety Analysis (ZSA) • Common Mode Analysis (CMA) • Preliminary Hazard Analysis (PHA) • Operational & Support Hazard Analysis (O&SHA) • Health Hazard Analysis (HHA) • System/Subsystem Hazard Analysis (SHA/SSHA) • Hazardous Materials • Failure Modes and Effects Criticality Analyses (FMECA) • Safety Assessment Report (SAR). • A working knowledge of gas turbine engines with an intermediate to advanced knowledge of turbomachinery failure modes, including manufacturing methods, is desired • Comprehension of electro-mechanical components and Electrical and Mechanical Engineering principles is desired • Ability to assess system designs for maintainability and develop work instructions is desired • Strong verbal and written communication skills • Proficient using of Microsoft Office tools.
Aerospace Coatings Manufacturing Process Engineer PPG Industries IncAerospace Coatings Manufacturing Process EngineerShelby, MIProvide engineering support to improve manufacturing unit operations process flows, process capability, production yields, overall cost of goods sold, equipment reliability, waste minimization, and EH&S improvements through data-based decision making. Through leadership in innovation, sustainability and color, PPG helps customers in industrial, transportation, consumer products, and construction markets and aftermarkets to enhance more surfaces in more ways than does any other company.
Senior Supplier Quality & Development Engineer (Castings & Forgings) - Aerospace Parker Hannifin CorpSenior Supplier Quality & Development Engineer (Castings & Forgings) - AerospaceKalamazoo, MIParker offers competitive benefit programs, including: Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary optional life, accident insurance, hospital indemnity insurance and critical illness insurance with competitive premium cost. Working with some of the most brilliant minds in the industry, your contributions will be pivotal in developing innovative technologies and products, significantly contributing to Parker's goal of addressing the world's most pressing engineering challenges.
Principal Engineer - IR&D - Aerospace Parker Hannifin CorpPrincipal Engineer - IR&D - AerospaceKalamazoo, MIConducts analyses and/or tests pertaining to the development of new designs, methods, materials, equipment, or processes and completes required documentation by determining required actions, performing or directing completion of tasks, and publishing findings and/or results. Provides expert technical information concerning manufacturing or processing techniques, materials properties, and process advantages and limitations, which affect long-range plant and product engineering planning by carefully analyzing and applying advanced engineering principles.
Entry level machine operator – Aerospace and Defense manufacturing Barron Industries IncEntry level machine operator – Aerospace and Defense manufacturingOxford, MI$18–$20 / hourBarron Industries, a leader in precision metal components for the booming aerospace and defense industries, is hiring Entry level machine operator – Aerospace and Defense manufacturing. Founded in 1983, Barron Industries is a leading investment casting and precision machining company serving the aerospace and defense industries.
Senior Manager of Compliance - Aerospace Global Repair Stations Eaton Corporation PlcSenior Manager of Compliance - Aerospace Global Repair StationsJackson, MI$146,000–$215,000 / yearEaton''s Aerospace Group is currently seeking a FAA Repair Station leader to oversee all quality aspects of maintenance, repair, and overhaul (MRO), ensuring compliance, continuous improvement, safety, and consistency across Eaton's global repair station activities. The ideal candidate will bring deep aerospace MRO expertise, a proven ability to lead complex, multi-region operations, and the vision and execution capability to transform geographically distributed businesses into one integrated global enterprise.
NewEdison Engineering Development Program (EEDP) Systems – Mechanical/Aerospace Engineering – US – 2027 Start GE AerospaceEdison Engineering Development Program (EEDP) Systems – Mechanical/Aerospace Engineering – US – 2027 StartGrand Rapids, MichiganTherefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). The Edison Engineering Development Program (EEDP) is an early career engineering program designed to accelerate your professional growth via rotational assignments which take place over the course of 2 years.
LEO Lecturer III - Aerospace Engineering University of MichiganLEO Lecturer III - Aerospace EngineeringAnn Arbor, MIThe Michigan Aerospace Engineering Department in the College of Engineering at the University of Michigan is seeking an LEO Lecturer III focused on teaching core aerospace undergraduate theoretical and laboratory courses and selected graduate courses. The Michigan Aerospace Engineering Department has developed a curriculum devoted to covering the various topics in aerospace engineering: aerodynamics, propulsion, structures and materials, dynamics and control, systems engineering, and computation.
NewAerospace Precision Fabrication Fitter-Welder SB Tool CompanyAerospace Precision Fabrication Fitter-WelderShelby Twp, MIYou’ll wrap the day by resetting your workcell—orderly, safe, and ready for tomorrow’s build—and sharpening your craft through ongoing training in aerospace welding techniques. As components come together, you’ll move confidently between MIG, TIG, and stick processes, working primarily with aluminum and stainless steel to produce clean, durable joints.
Division Quality Manager - Aerospace Hydraulics Parker Hannifin CorpDivision Quality Manager - Aerospace HydraulicsKalamazoo, MIOur competitive package includes: Benefit & Retirement Plans: Parker offers competitive benefit programs, including: Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary optional life, accident insurance, hospital indemnity insurance and critical illness insurance with competitive premium cost. Working with some of the most brilliant minds in the industry, your contributions will be pivotal in developing innovative technologies and products, significantly contributing to Parkers goal of addressing the worlds most pressing engineering challenges.
Division Business Development Manager - Aerospace Parker Hannifin CorpDivision Business Development Manager - AerospaceKalamazoo, MIOur competitive package includes: • Benefit & Retirement Plans • Parker offers competitive benefit programs including Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary, optional life, accident insurance, hospital indemnity insurance, and critical illness insurance with competitive premium cost. • Extremely articulate communication skills, written and verbal, able to deal with upset customers or difficult situations, able to coordinate and collaborate across functions, able to work with customers, able to present to all levels of an organization and executive leadership.
Customer Experience Mgr - Aerospace Parker Hannifin CorpCustomer Experience Mgr - AerospaceKalamazoo, MIOur competitive package includes: Benefit & Retirement Plans: Parker offers competitive benefit programs, including: Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary optional life, accident insurance, hospital indemnity insurance and critical illness insurance with competitive premium cost. Working with some of the most brilliant minds in the industry, your contributions will be pivotal in developing innovative technologies and products, significantly contributing to Parker's goal of addressing the world's most pressing engineering challenges.
Edison Engineering Development Program (EEDP) Systems - Mechanical/Aerospace Engineering - US - 2027 Start GE Aerospace.Edison Engineering Development Program (EEDP) Systems - Mechanical/Aerospace Engineering - US - 2027 StartGrand Rapids, MITherefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Job Summary: The Edison Engineering Development Program (EEDP) is an early career engineering program designed to accelerate your professional growth via rotational assignments which take place over the course of 2 years.
NewIndustrial Millwright Mechanic – Aerospace Manufacturing Howmet Aerospace (Whitetail, MI)Industrial Millwright Mechanic – Aerospace ManufacturingWhitehall, MIYou’ll diagnose issues across hydraulics, pneumatics, and mechanical systems—then repair, rebuild, and verify proper operation. One hour you might align belts and sheaves on a critical drive, the next you’re pipefitting, welding, or fabricating a bracket to get a machine back online.
Senior HR Business Partner - Aerospace Parker Hannifin CorpSenior HR Business Partner - AerospaceKalamazoo, MIOur competitive package includes: Benefit & Retirement Plans: Parker offers competitive benefit programs, including: Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary optional life, accident insurance, hospital indemnity insurance and critical illness insurance with competitive premium cost. The ideal candidate brings at least six years of hands on HR experience (employee relations, recruiting, onboarding, HRIS, personnel law) and is ready to collaborate with leaders to advance people strategy, workforce planning, engagement, and performance initiatives at the site level.
Senior Subsystem Lead Engineer GMSenior Subsystem Lead EngineerMilford, MichiganThe Sub-System Lead Engineer (SSLE) in Emerging New Markets (ENM) is an IC responsible for leading the development, definition, and documentation of requirements for applicable sub-systems (or Solutions) in diverse domains such as Interface between autonomous driver and vehicle motion platform and Battery Management Systems in Non-Automotive Applications. The role involves close collaboration with cross-functional teams, ensuring technical specifications are well-defined, behaviors are clearly documented, and compliance with requirements is maintained throughout the development lifecycle.
Senior Engineer Williams InternationalSenior EngineerPontiac, MIWilliams International has exciting opportunities for the following types of engineers to join our team: • Aerospace Engineer • Software Engineer • Electrical and Power Electronics Engineer • Design Engineer • Mechanical Engineer • Manufacturing Engineer. Williams International is a Drug Free Workplace where all new team members and contractors are subject to pre-employment drug testing for the following controlled substances: marijuana, cocaine, PCP, amphetamines, opioids and alcohol as policy dictates.
Lead Design Release Engineer – GM Defense GMLead Design Release Engineer – GM DefenseWarren, MichiganPowertrain / RESS (engine integration, transmission/driveline interfaces, cooling, fuel systems, propulsion packaging, high-voltage battery systems, battery controls, charging interfaces, energy management). GM Defense is seeking Lead Design Release Engineers to serve as the single accountable engineering owners for major subsystems on current and future defense programs.
Manufacturing Engineer II ROUSHManufacturing Engineer IILivonia, MIFull timeWidely recognized for providing engineering, testing, prototype, and manufacturing services to the transportation industry, Roush also provides significant support to the aerospace, defense and theme park industries. The Manufacturing Engineer II will develop and improve manufacturing processes by studying product requirements, researching and improving existing prints, designing, modifying, and testing manufacturing methods and equipment, as well as other manufacturing responsibilities.
Manufacturing Engineer II - Roush Entertainment Systems ROUSHManufacturing Engineer II - Roush Entertainment SystemsLivonia, MIFull timeThe Manufacturing Engineer II will develop and improve manufacturing processes by studying product requirements, researching and improving existing prints, designing, modifying, and testing manufacturing methods and equipment, as well as other manufacturing responsibilities. Widely recognized for providing engineering, testing, prototype, and manufacturing services to the transportation industry, Roush also provides significant support to the aerospace, defense and theme park industries.
Electrical and Controls Engineer Heroux-Devtek IncElectrical and Controls EngineerLivonia, MIft.) with over 130 employees, Beaver Aerospace & Defense is one of Héroux-Devtek's centers of excellence for design, development, manufacturing, and assembly of ball screws, actuation systems and other aerospace components. With a strong focus on custom precision manufacturing processes with machining automation and techniques, we aim to remain the best value producer of complex and precision Aerospace & Defense components.
Entry Level Controls Engineer Wixom FivesEntry Level Controls Engineer WixomWixom, MIAbout Fives Group: Fives Group, headquartered in Paris, France, is an industrial engineering Group with a heritage of over 200 years, designs and supplies machines, process equipment and production lines for the worlds largest industrial groups including the aluminum, steel, tube and pipe, glass, automotive, aerospace, logistics, cement and energy sectors. Conducting the peripheral device programming, machine PLC programming, coordinate the machine debug, power-up, and machine validation with build and electrical teams.
Application Engineer, EW / RADAR - Southeast Rohde & Schwarz GmbH & Co KGApplication Engineer, EW / RADAR - SoutheastSoutheast, GA$131,000–$175,000 / yearWorking alongside our sales, marketing, and R&D teams, you will be demonstrating products, providing training, and delivering technical support to some of our key Aerospace & Defense customers. Individual pay within the range is determined by several factors including location, education or training, relevant work history, sales incentive structure and job-related skills.
Intern - Automation Engineer - Whitehall, MI (Summer 2026) Howmet Aerospace IncIntern - Automation Engineer - Whitehall, MI (Summer 2026)Whitehall, MIExperience with robotics or other programming of robots • Strong verbal and written communication skills • Strong collaboration skills • Ability to work in a self-directed or team environment • Highly detailed and organized • Relevant internship/work experience a plus. The 2026 Summer Internship Program consists of 10-14 weeks of structured hands-on training involving plant tours, lunch & learn seminars, fun networking events to connect with fellow interns, and projects selected to add direct value to the business.
Battery Thermal 3D CFD–Virtual Propulsion Engineer (VPE) GMBattery Thermal 3D CFD–Virtual Propulsion Engineer (VPE)Warren, MichiganConduct cell-level thermal analysis and TRP analysis while working closely with cell CAE team to integrate electrochemical simulation with battery system transient thermal behavior and support the estimation of cell life under different driving cycle and ambient conditions. As a Battery Thermal 3D CFD Virtual Propulsion Engineer (VPE), you will perform cell, module and pack level Computational Fluid Dynamics (CFD) analysis to optimize thermal performance of GM’s Battery Systems under normal and abuse conditions (TRP).
Controller Integration Engineer (VMEC) GMController Integration Engineer (VMEC)Milford, MichiganThis role is part of a group responsible for vehicle embedded control system engineering with a primary focus on troubleshooting engine, transmission, hybrid, electrification, chassis, and intelligent brake control system issues through all the different life cycle stages (early development through launch and through end of production) on the full range of GM vehicles from BEVs and Autonomous vehicles to conventional propulsion and high-performance vehicles. In this role as a Controller Integration Engineer, you will do that by troubleshooting HIL, vehicle system bench and vehicle integration issues using system engineering knowledge to isolate causes, establishing root cause and potential solutions working with BSW, calibration, software, Pre-Production Operations, vehicle plant and product development teams.
Design Release Engineer – GM Defense GMDesign Release Engineer – GM DefenseWarren, MichiganIn this role, you will support end-to-end engineering delivery for assigned components and subsystem areas, working closely with subsystem leads and cross-functional teams to ensure GM Defense solutions meet performance, safety, quality, cost, schedule, and compliance targets. Powertrain / RESS (engine integration, transmission/driveline interfaces, cooling, fuel systems, propulsion packaging, high-voltage battery systems, battery controls, charging interfaces, energy management).
Software and Controls Engineer – GM Defense GMSoftware and Controls Engineer – GM DefenseMilford, MichiganThis is a fast-paced role where you will operate with independence to impact compressed-timeline programs—such as developing in-house controls solutions (like custom Vehicle Interface Modules) and optimizing system performance across complex electrical architectures. Work collaboratively with systems integration engineers and technical leads to implement control algorithms for propulsion, chassis, and other complex systems into existing or new supervisory controls.
Virtual Propulsion Engineer-3D Combustion, Airflow, Exhaust GMVirtual Propulsion Engineer-3D Combustion, Airflow, ExhaustPontiac, MichiganThe ideal candidate will have deep expertise in engine combustion modeling, fuel injection systems, and emissions control, and will contribute to the design and optimization of next-generation gasoline and diesel combustion chambers. This includes direct company sponsorship, entry of GM as the immigration employer of record on a government form, and any work authorization requiring a written submission or other immigration support from the company (e.g., H1-B, OPT, STEM OPT, CPT, TN, J-1, etc).
Fuel Systems Virtual Integration Engineer GMFuel Systems Virtual Integration EngineerWarren, MichiganAs a Fuel Systems VDDV Virtual Integration Engineer, you will leverage high-fidelity, multi-physics simulations to drive the design, integration, and validation of next-generation fuel systems across GM’s award-winning vehicle portfolio. This role also offers the opportunity to shape the future of virtual engineering by developing advanced simulation methodologies, automation tools, and data-driven workflows that enhance speed, accuracy, and decision-making across the enterprise.
Senior Software and Controls Integration Engineer – AV Controls Integration GMSenior Software and Controls Integration Engineer – AV Controls IntegrationMilford, MichiganWe are seeking a Senior Controls and Software Integration Engineer – AV Controls Integration to lead the design, implementation, and continuous improvement of the software tooling and automation that powers AV Controls integration and support HIL/SIL validation, and release execution. +5 years of professional software engineering experience, including substantial work on backend services, build/CI/CD systems, or test automation frameworks in embedded or distributed systems.
Lead Software and Controls Engineer – GM Defense GMLead Software and Controls Engineer – GM DefenseMilford, MichiganThis is a fast-paced role where you will operate with a high level of independent judgment to immediately impact compressed-timeline programs—such as developing in-house controls solutions (like custom Vehicle Interface Modules) and optimizing system performance across complex electrical architectures. Reporting to the EGM of Electrical Systems, Controls, and Software (ESCS) team, you will be hands-on in writing code and integrating requirements specific to GM Defense platforms while providing technical leadership.
Electrical Engineer I ROUSHElectrical Engineer ILivonia, MIFull timeThe role will analyze and define wire harness topology, partitioning, optimize packaging and retention strategies, provide support for wire harness build, vehicles build, validation tests, module configuration and flashing. Widely recognized for providing engineering, testing, prototype, and manufacturing services to the transportation industry, Roush also provides significant support to the aerospace, defense and theme park industries.
Union Stationary Engineer Jones Lang LaSalle IncUnion Stationary EngineerPontiac, MIWhat your day-to-day will look like: Monitor and maintain manufacturing process equipment including chilled water systems, sub-freezing chiller systems, water tube boilers, fire tube boilers, cooling towers, air compressors, compressed air dryers, zero air systems, and cooling tower/boiler water chemical treatment systems. Manage personnel responsibilities including compliance with the current Collective Bargaining Agreement, submission of employee PTO/vacation requests, maintenance of current forklift and aerial lift operators' licenses, and successful completion of scheduled training.
Senior Subsystem Lead Engineer General Motors CoSenior Subsystem Lead EngineerMilford, MIThe Role: The Sub-System Lead Engineer (SSLE) in Emerging New Markets (ENM) is an IC responsible for leading the development, definition, and documentation of requirements for applicable sub-systems (or Solutions) in diverse domains such as Interface between autonomous driver and vehicle motion platform and Battery Management Systems in Non-Automotive Applications. As a technical domain expert and single point of contact, SSLE provides guidance on system design, troubleshooting, and optimization and owns the development and delivery of solutions, driving cross team and group efforts.
Manufacturing Engineer II - Roush Entertainment Systems Roush Enterprises IncManufacturing Engineer II - Roush Entertainment SystemsLivonia, MIThe Manufacturing Engineer II will develop and improve manufacturing processes by studying product requirements, researching and improving existing prints, designing, modifying, and testing manufacturing methods and equipment, as well as other manufacturing responsibilities. Widely recognized for providing engineering, testing, prototype, and manufacturing services to the transportation industry, Roush also provides significant support to the aerospace, defense and theme park industries.
Manufacturing Engineer II Roush Enterprises IncManufacturing Engineer IILivonia, MIWidely recognized for providing engineering, testing, prototype, and manufacturing services to the transportation industry, Roush also provides significant support to the aerospace, defense and theme park industries. The Manufacturing Engineer II will develop and improve manufacturing processes by studying product requirements, researching and improving existing prints, designing, modifying, and testing manufacturing methods and equipment, as well as other manufacturing responsibilities.
Mechanical Engineer I Roush Enterprises IncMechanical Engineer ILivonia, MIWidely recognized for providing engineering, testing, prototype, and manufacturing services to the transportation industry, Roush also provides significant support to the aerospace, defense and theme park industries. With over 2,400 employees in facilities throughout the United States, Europe, Asia, and South America, our unique combination of creativity and tenacity activates big ideas on a global stage.
Lead Design Release Engineer - GM Defense General Motors CoLead Design Release Engineer - GM DefenseWarren, MIPowertrain / RESS (engine integration, transmission/driveline interfaces, cooling, fuel systems, propulsion packaging, high-voltage battery systems, battery controls, charging interfaces, energy management). GM Defense is seeking Lead Design Release Engineers to serve as the single accountable engineering owners for major subsystems on current and future defense programs.
Intern - Electrical Controls Engineer - Whitehall, MI (Summer 2026) Howmet Aerospace IncIntern - Electrical Controls Engineer - Whitehall, MI (Summer 2026)Whitehall, MIThe 2026 Summer Internship Program consists of 10-14 weeks of structured hands-on training involving plant tours, lunch & learn seminars, fun networking events to connect with fellow interns, and projects selected to add direct value to the business. Basic Qualifications: Candidate must be pursuing a bachelor's degree in engineering from an accredited institution in one of the following disciplines: Electrical, Electrical Engineering Technology, or Computer Minimum completion of Sophomore level coursework from an accredited institution (by May 2026).
Noise & Vibration CAE - Propulsion Mounting Integration Engineer General Motors CoNoise & Vibration CAE - Propulsion Mounting Integration EngineerMilford, MIWorking within the Vehicle Development, Design, and Validation (VDDV) environment, the engineer will apply analytical methods and CAE tools to support design decisions, learn enterprise-level development processes, and collaborate closely with cross-functional teams. Hands-on experience applying Machine Learning and AI techniques (e.g., surrogate modeling, pattern recognition, design space exploration, predictive performance modeling) to engineering and CAE applications.